48 lines
1.7 KiB
Plaintext
48 lines
1.7 KiB
Plaintext
* Actions Semi Owl SoCs DMA controller
|
|
|
|
This binding follows the generic DMA bindings defined in dma.txt.
|
|
|
|
Required properties:
|
|
- compatible: Should be "actions,s900-dma".
|
|
- reg: Should contain DMA registers location and length.
|
|
- interrupts: Should contain 4 interrupts shared by all channel.
|
|
- #dma-cells: Must be <1>. Used to represent the number of integer
|
|
cells in the dmas property of client device.
|
|
- dma-channels: Physical channels supported.
|
|
- dma-requests: Number of DMA request signals supported by the controller.
|
|
Refer to Documentation/devicetree/bindings/dma/dma.txt
|
|
- clocks: Phandle and Specifier of the clock feeding the DMA controller.
|
|
|
|
Example:
|
|
|
|
Controller:
|
|
dma: dma-controller@e0260000 {
|
|
compatible = "actions,s900-dma";
|
|
reg = <0x0 0xe0260000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
dma-channels = <12>;
|
|
dma-requests = <46>;
|
|
clocks = <&clock CLK_DMAC>;
|
|
};
|
|
|
|
Client:
|
|
|
|
DMA clients connected to the Actions Semi Owl SoCs DMA controller must
|
|
use the format described in the dma.txt file, using a two-cell specifier
|
|
for each channel.
|
|
|
|
The two cells in order are:
|
|
1. A phandle pointing to the DMA controller.
|
|
2. The channel id.
|
|
|
|
uart5: serial@e012a000 {
|
|
...
|
|
dma-names = "tx", "rx";
|
|
dmas = <&dma 26>, <&dma 27>;
|
|
...
|
|
};
|