73 lines
1.8 KiB
Plaintext
73 lines
1.8 KiB
Plaintext
Rockchip specific extensions for rk3066 HDMI
|
|
============================================
|
|
|
|
Required properties:
|
|
- compatible:
|
|
"rockchip,rk3066-hdmi";
|
|
- reg:
|
|
Physical base address and length of the controller's registers.
|
|
- clocks, clock-names:
|
|
Phandle to HDMI controller clock, name should be "hclk".
|
|
- interrupts:
|
|
HDMI interrupt number.
|
|
- power-domains:
|
|
Phandle to the RK3066_PD_VIO power domain.
|
|
- rockchip,grf:
|
|
This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
|
|
- ports:
|
|
Contains one port node with two endpoints, numbered 0 and 1,
|
|
connected respectively to vop0 and vop1.
|
|
Contains one port node with one endpoint
|
|
connected to a hdmi-connector node.
|
|
- pinctrl-0, pinctrl-name:
|
|
Switch the iomux for the HPD/I2C pins to HDMI function.
|
|
|
|
Example:
|
|
hdmi: hdmi@10116000 {
|
|
compatible = "rockchip,rk3066-hdmi";
|
|
reg = <0x10116000 0x2000>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_HDMI>;
|
|
clock-names = "hclk";
|
|
power-domains = <&power RK3066_PD_VIO>;
|
|
rockchip,grf = <&grf>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
hdmi_in: port@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
hdmi_in_vop0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&vop0_out_hdmi>;
|
|
};
|
|
hdmi_in_vop1: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&vop1_out_hdmi>;
|
|
};
|
|
};
|
|
hdmi_out: port@1 {
|
|
reg = <1>;
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
hdmi {
|
|
hdmi_hpd: hdmi-hpd {
|
|
rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
|
|
};
|
|
hdmii2c_xfer: hdmii2c-xfer {
|
|
rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
|
|
<0 RK_PA2 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|