42 lines
1.1 KiB
Plaintext
42 lines
1.1 KiB
Plaintext
Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
|
|
|
|
Required properties:
|
|
- compatible: "raydium,rm67191"
|
|
- reg: virtual channel for MIPI-DSI protocol
|
|
must be <0>
|
|
- dsi-lanes: number of DSI lanes to be used
|
|
must be <3> or <4>
|
|
- port: input port node with endpoint definition as
|
|
defined in Documentation/devicetree/bindings/graph.txt;
|
|
the input port should be connected to a MIPI-DSI device
|
|
driver
|
|
|
|
Optional properties:
|
|
- reset-gpios: a GPIO spec for the RST_B GPIO pin
|
|
- v3p3-supply: phandle to 3.3V regulator that powers the VDD_3V3 pin
|
|
- v1p8-supply: phandle to 1.8V regulator that powers the VDD_1V8 pin
|
|
- width-mm: see panel-common.txt
|
|
- height-mm: see panel-common.txt
|
|
- video-mode: 0 - burst-mode
|
|
1 - non-burst with sync event
|
|
2 - non-burst with sync pulse
|
|
|
|
Example:
|
|
|
|
panel@0 {
|
|
compatible = "raydium,rm67191";
|
|
reg = <0>;
|
|
pinctrl-0 = <&pinctrl_mipi_dsi_0_1_en>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
|
dsi-lanes = <4>;
|
|
width-mm = <68>;
|
|
height-mm = <121>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&mipi_out>;
|
|
};
|
|
};
|
|
};
|