34 lines
1.5 KiB
Plaintext
34 lines
1.5 KiB
Plaintext
Synopsys DesignWare HDMI TX Encoder
|
|
===================================
|
|
|
|
This document defines device tree properties for the Synopsys DesignWare HDMI
|
|
TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding
|
|
specification by itself but is meant to be referenced by platform-specific
|
|
device tree bindings.
|
|
|
|
When referenced from platform device tree bindings the properties defined in
|
|
this document are defined as follows. The platform device tree bindings are
|
|
responsible for defining whether each property is required or optional.
|
|
|
|
- reg: Memory mapped base address and length of the DWC HDMI TX registers.
|
|
|
|
- reg-io-width: Width of the registers specified by the reg property. The
|
|
value is expressed in bytes and must be equal to 1 or 4 if specified. The
|
|
register width defaults to 1 if the property is not present.
|
|
|
|
- interrupts: Reference to the DWC HDMI TX interrupt.
|
|
|
|
- clocks: References to all the clocks specified in the clock-names property
|
|
as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt.
|
|
|
|
- clock-names: The DWC HDMI TX uses the following clocks.
|
|
|
|
- "iahb" is the bus clock for either AHB and APB (mandatory).
|
|
- "isfr" is the internal register configuration clock (mandatory).
|
|
- "cec" is the HDMI CEC controller main clock (optional).
|
|
|
|
- ports: The connectivity of the DWC HDMI TX with the rest of the system is
|
|
expressed in using ports as specified in the device graph bindings defined
|
|
in Documentation/devicetree/bindings/graph.txt. The numbering of the ports
|
|
is platform-specific.
|