139 lines
5.7 KiB
Plaintext
139 lines
5.7 KiB
Plaintext
What: /sys/kernel/debug/habanalabs/hl<n>/addr
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Sets the device address to be used for read or write through
|
|
PCI bar, or the device VA of a host mapped memory to be read or
|
|
written directly from the host. The latter option is allowed
|
|
only when the IOMMU is disabled.
|
|
The acceptable value is a string that starts with "0x"
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/command_buffers
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Displays a list with information about the currently allocated
|
|
command buffers
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/command_submission
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Displays a list with information about the currently active
|
|
command submissions
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/command_submission_jobs
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Displays a list with detailed information about each JOB (CB) of
|
|
each active command submission
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/data32
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Allows the root user to read or write directly through the
|
|
device's PCI bar. Writing to this file generates a write
|
|
transaction while reading from the file generates a read
|
|
transaction. This custom interface is needed (instead of using
|
|
the generic Linux user-space PCI mapping) because the DDR bar
|
|
is very small compared to the DDR memory and only the driver can
|
|
move the bar before and after the transaction.
|
|
If the IOMMU is disabled, it also allows the root user to read
|
|
or write from the host a device VA of a host mapped memory
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/device
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Enables the root user to set the device to specific state.
|
|
Valid values are "disable", "enable", "suspend", "resume".
|
|
User can read this property to see the valid values
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/engines
|
|
Date: Jul 2019
|
|
KernelVersion: 5.3
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Displays the status registers values of the device engines and
|
|
their derived idle status
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/i2c_addr
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Sets I2C device address for I2C transaction that is generated
|
|
by the device's CPU
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/i2c_bus
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Sets I2C bus address for I2C transaction that is generated by
|
|
the device's CPU
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/i2c_data
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Triggers an I2C transaction that is generated by the device's
|
|
CPU. Writing to this file generates a write transaction while
|
|
reading from the file generates a read transcation
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/i2c_reg
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Sets I2C register id for I2C transaction that is generated by
|
|
the device's CPU
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/led0
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Sets the state of the first S/W led on the device
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/led1
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Sets the state of the second S/W led on the device
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/led2
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Sets the state of the third S/W led on the device
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/mmu
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Displays the hop values and physical address for a given ASID
|
|
and virtual address. The user should write the ASID and VA into
|
|
the file and then read the file to get the result.
|
|
e.g. to display info about VA 0x1000 for ASID 1 you need to do:
|
|
echo "1 0x1000" > /sys/kernel/debug/habanalabs/hl0/mmu
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/set_power_state
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Sets the PCI power state. Valid values are "1" for D0 and "2"
|
|
for D3Hot
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/userptr
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Displays a list with information about the currently user
|
|
pointers (user virtual addresses) that are pinned and mapped
|
|
to DMA addresses
|
|
|
|
What: /sys/kernel/debug/habanalabs/hl<n>/vm
|
|
Date: Jan 2019
|
|
KernelVersion: 5.1
|
|
Contact: oded.gabbay@gmail.com
|
|
Description: Displays a list with information about all the active virtual
|
|
address mappings per ASID
|