linux/linux-5.4.31/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.c

91 lines
2.3 KiB
C

// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 2009-2012 Realtek Corporation.*/
#include "../pwrseqcmd.h"
#include "pwrseq.h"
/* drivers should parse below arrays and do the corresponding actions */
/*3 Power on Array*/
struct wlan_pwr_cfg rtl8723A_power_on_flow
[RTL8723A_TRANS_CARDEMU_TO_ACT_STEPS +
RTL8723A_TRANS_END_STEPS] = {
RTL8723A_TRANS_CARDEMU_TO_ACT
RTL8723A_TRANS_END
};
/*3Radio off GPIO Array */
struct wlan_pwr_cfg rtl8723A_radio_off_flow
[RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8723A_TRANS_END_STEPS] = {
RTL8723A_TRANS_ACT_TO_CARDEMU
RTL8723A_TRANS_END
};
/*3Card Disable Array*/
struct wlan_pwr_cfg rtl8723A_card_disable_flow
[RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS +
RTL8723A_TRANS_END_STEPS] = {
RTL8723A_TRANS_ACT_TO_CARDEMU
RTL8723A_TRANS_CARDEMU_TO_CARDDIS
RTL8723A_TRANS_END
};
/*3 Card Enable Array*/
struct wlan_pwr_cfg rtl8723A_card_enable_flow
[RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS +
RTL8723A_TRANS_END_STEPS] = {
RTL8723A_TRANS_CARDDIS_TO_CARDEMU
RTL8723A_TRANS_CARDEMU_TO_ACT
RTL8723A_TRANS_END
};
/*3Suspend Array*/
struct wlan_pwr_cfg rtl8723A_suspend_flow
[RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS +
RTL8723A_TRANS_END_STEPS] = {
RTL8723A_TRANS_ACT_TO_CARDEMU
RTL8723A_TRANS_CARDEMU_TO_SUS
RTL8723A_TRANS_END
};
/*3 Resume Array*/
struct wlan_pwr_cfg rtl8723A_resume_flow
[RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8723A_TRANS_CARDEMU_TO_SUS_STEPS +
RTL8723A_TRANS_END_STEPS] = {
RTL8723A_TRANS_SUS_TO_CARDEMU
RTL8723A_TRANS_CARDEMU_TO_ACT
RTL8723A_TRANS_END
};
/*3HWPDN Array*/
struct wlan_pwr_cfg rtl8723A_hwpdn_flow
[RTL8723A_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8723A_TRANS_CARDEMU_TO_PDN_STEPS +
RTL8723A_TRANS_END_STEPS] = {
RTL8723A_TRANS_ACT_TO_CARDEMU
RTL8723A_TRANS_CARDEMU_TO_PDN
RTL8723A_TRANS_END
};
/*3 Enter LPS */
struct wlan_pwr_cfg rtl8723A_enter_lps_flow
[RTL8723A_TRANS_ACT_TO_LPS_STEPS +
RTL8723A_TRANS_END_STEPS] = {
/*FW behavior*/
RTL8723A_TRANS_ACT_TO_LPS
RTL8723A_TRANS_END
};
/*3 Leave LPS */
struct wlan_pwr_cfg rtl8723A_leave_lps_flow
[RTL8723A_TRANS_LPS_TO_ACT_STEPS +
RTL8723A_TRANS_END_STEPS] = {
/*FW behavior*/
RTL8723A_TRANS_LPS_TO_ACT
RTL8723A_TRANS_END
};