423 lines
13 KiB
C
423 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright(c) 2009-2012 Realtek Corporation.*/
|
|
|
|
#include "../wifi.h"
|
|
#include "../core.h"
|
|
#include "../base.h"
|
|
#include "../pci.h"
|
|
#include "reg.h"
|
|
#include "def.h"
|
|
#include "phy.h"
|
|
#include "dm.h"
|
|
#include "fw.h"
|
|
#include "hw.h"
|
|
#include "sw.h"
|
|
#include "trx.h"
|
|
#include "led.h"
|
|
|
|
#include <linux/module.h>
|
|
|
|
static void rtl92s_init_aspm_vars(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
|
|
|
|
/*close ASPM for AMD defaultly */
|
|
rtlpci->const_amdpci_aspm = 0;
|
|
|
|
/* ASPM PS mode.
|
|
* 0 - Disable ASPM,
|
|
* 1 - Enable ASPM without Clock Req,
|
|
* 2 - Enable ASPM with Clock Req,
|
|
* 3 - Alwyas Enable ASPM with Clock Req,
|
|
* 4 - Always Enable ASPM without Clock Req.
|
|
* set defult to RTL8192CE:3 RTL8192E:2
|
|
* */
|
|
rtlpci->const_pci_aspm = 2;
|
|
|
|
/*Setting for PCI-E device */
|
|
rtlpci->const_devicepci_aspm_setting = 0x03;
|
|
|
|
/*Setting for PCI-E bridge */
|
|
rtlpci->const_hostpci_aspm_setting = 0x02;
|
|
|
|
/* In Hw/Sw Radio Off situation.
|
|
* 0 - Default,
|
|
* 1 - From ASPM setting without low Mac Pwr,
|
|
* 2 - From ASPM setting with low Mac Pwr,
|
|
* 3 - Bus D3
|
|
* set default to RTL8192CE:0 RTL8192SE:2
|
|
*/
|
|
rtlpci->const_hwsw_rfoff_d3 = 2;
|
|
|
|
/* This setting works for those device with
|
|
* backdoor ASPM setting such as EPHY setting.
|
|
* 0 - Not support ASPM,
|
|
* 1 - Support ASPM,
|
|
* 2 - According to chipset.
|
|
*/
|
|
rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
|
|
}
|
|
|
|
static void rtl92se_fw_cb(const struct firmware *firmware, void *context)
|
|
{
|
|
struct ieee80211_hw *hw = context;
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rt_firmware *pfirmware = NULL;
|
|
char *fw_name = "rtlwifi/rtl8192sefw.bin";
|
|
|
|
RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
|
|
"Firmware callback routine entered!\n");
|
|
complete(&rtlpriv->firmware_loading_complete);
|
|
if (!firmware) {
|
|
pr_err("Firmware %s not available\n", fw_name);
|
|
rtlpriv->max_fw_size = 0;
|
|
return;
|
|
}
|
|
if (firmware->size > rtlpriv->max_fw_size) {
|
|
pr_err("Firmware is too big!\n");
|
|
rtlpriv->max_fw_size = 0;
|
|
release_firmware(firmware);
|
|
return;
|
|
}
|
|
pfirmware = (struct rt_firmware *)rtlpriv->rtlhal.pfirmware;
|
|
memcpy(pfirmware->sz_fw_tmpbuffer, firmware->data, firmware->size);
|
|
pfirmware->sz_fw_tmpbufferlen = firmware->size;
|
|
release_firmware(firmware);
|
|
}
|
|
|
|
static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
|
|
int err = 0;
|
|
u16 earlyrxthreshold = 7;
|
|
char *fw_name = "rtlwifi/rtl8192sefw.bin";
|
|
|
|
rtlpriv->dm.dm_initialgain_enable = true;
|
|
rtlpriv->dm.dm_flag = 0;
|
|
rtlpriv->dm.disable_framebursting = false;
|
|
rtlpriv->dm.thermalvalue = 0;
|
|
rtlpriv->dm.useramask = true;
|
|
|
|
/* compatible 5G band 91se just 2.4G band & smsp */
|
|
rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G;
|
|
rtlpriv->rtlhal.bandset = BAND_ON_2_4G;
|
|
rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY;
|
|
|
|
rtlpci->transmit_config = 0;
|
|
|
|
rtlpci->receive_config =
|
|
RCR_APPFCS |
|
|
RCR_APWRMGT |
|
|
/*RCR_ADD3 |*/
|
|
RCR_AMF |
|
|
RCR_ADF |
|
|
RCR_APP_MIC |
|
|
RCR_APP_ICV |
|
|
RCR_AICV |
|
|
/* Accept ICV error, CRC32 Error */
|
|
RCR_ACRC32 |
|
|
RCR_AB |
|
|
/* Accept Broadcast, Multicast */
|
|
RCR_AM |
|
|
/* Accept Physical match */
|
|
RCR_APM |
|
|
/* Accept Destination Address packets */
|
|
/*RCR_AAP |*/
|
|
RCR_APP_PHYST_STAFF |
|
|
/* Accept PHY status */
|
|
RCR_APP_PHYST_RXFF |
|
|
(earlyrxthreshold << RCR_FIFO_OFFSET);
|
|
|
|
rtlpci->irq_mask[0] = (u32)
|
|
(IMR_ROK |
|
|
IMR_VODOK |
|
|
IMR_VIDOK |
|
|
IMR_BEDOK |
|
|
IMR_BKDOK |
|
|
IMR_HCCADOK |
|
|
IMR_MGNTDOK |
|
|
IMR_COMDOK |
|
|
IMR_HIGHDOK |
|
|
IMR_BDOK |
|
|
IMR_RXCMDOK |
|
|
/*IMR_TIMEOUT0 |*/
|
|
IMR_RDU |
|
|
IMR_RXFOVW |
|
|
IMR_BCNINT
|
|
/*| IMR_TXFOVW*/
|
|
/*| IMR_TBDOK |
|
|
IMR_TBDER*/);
|
|
|
|
rtlpci->irq_mask[1] = (u32) 0;
|
|
|
|
rtlpci->shortretry_limit = 0x30;
|
|
rtlpci->longretry_limit = 0x30;
|
|
|
|
rtlpci->first_init = true;
|
|
|
|
/* for LPS & IPS */
|
|
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
|
|
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
|
|
rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
|
|
if (!rtlpriv->psc.inactiveps)
|
|
pr_info("Power Save off (module option)\n");
|
|
if (!rtlpriv->psc.fwctrl_lps)
|
|
pr_info("FW Power Save off (module option)\n");
|
|
rtlpriv->psc.reg_fwctrl_lps = 3;
|
|
rtlpriv->psc.reg_max_lps_awakeintvl = 5;
|
|
/* for ASPM, you can close aspm through
|
|
* set const_support_pciaspm = 0 */
|
|
rtl92s_init_aspm_vars(hw);
|
|
|
|
if (rtlpriv->psc.reg_fwctrl_lps == 1)
|
|
rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
|
|
else if (rtlpriv->psc.reg_fwctrl_lps == 2)
|
|
rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
|
|
else if (rtlpriv->psc.reg_fwctrl_lps == 3)
|
|
rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
|
|
|
|
/* for firmware buf */
|
|
rtlpriv->rtlhal.pfirmware = vzalloc(sizeof(struct rt_firmware));
|
|
if (!rtlpriv->rtlhal.pfirmware)
|
|
return 1;
|
|
|
|
rtlpriv->max_fw_size = RTL8190_MAX_FIRMWARE_CODE_SIZE*2 +
|
|
sizeof(struct fw_hdr);
|
|
pr_info("Driver for Realtek RTL8192SE/RTL8191SE\n"
|
|
"Loading firmware %s\n", fw_name);
|
|
/* request fw */
|
|
err = request_firmware_nowait(THIS_MODULE, 1, fw_name,
|
|
rtlpriv->io.dev, GFP_KERNEL, hw,
|
|
rtl92se_fw_cb);
|
|
if (err) {
|
|
pr_err("Failed to request firmware!\n");
|
|
vfree(rtlpriv->rtlhal.pfirmware);
|
|
rtlpriv->rtlhal.pfirmware = NULL;
|
|
return 1;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void rtl92s_deinit_sw_vars(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
|
|
if (rtlpriv->rtlhal.pfirmware) {
|
|
vfree(rtlpriv->rtlhal.pfirmware);
|
|
rtlpriv->rtlhal.pfirmware = NULL;
|
|
}
|
|
}
|
|
|
|
static bool rtl92se_is_tx_desc_closed(struct ieee80211_hw *hw, u8 hw_queue,
|
|
u16 index)
|
|
{
|
|
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
|
|
struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[hw_queue];
|
|
u8 *entry = (u8 *)(&ring->desc[ring->idx]);
|
|
u8 own = (u8)rtl92se_get_desc(hw, entry, true, HW_DESC_OWN);
|
|
|
|
if (own)
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
static struct rtl_hal_ops rtl8192se_hal_ops = {
|
|
.init_sw_vars = rtl92s_init_sw_vars,
|
|
.deinit_sw_vars = rtl92s_deinit_sw_vars,
|
|
.read_eeprom_info = rtl92se_read_eeprom_info,
|
|
.interrupt_recognized = rtl92se_interrupt_recognized,
|
|
.hw_init = rtl92se_hw_init,
|
|
.hw_disable = rtl92se_card_disable,
|
|
.hw_suspend = rtl92se_suspend,
|
|
.hw_resume = rtl92se_resume,
|
|
.enable_interrupt = rtl92se_enable_interrupt,
|
|
.disable_interrupt = rtl92se_disable_interrupt,
|
|
.set_network_type = rtl92se_set_network_type,
|
|
.set_chk_bssid = rtl92se_set_check_bssid,
|
|
.set_qos = rtl92se_set_qos,
|
|
.set_bcn_reg = rtl92se_set_beacon_related_registers,
|
|
.set_bcn_intv = rtl92se_set_beacon_interval,
|
|
.update_interrupt_mask = rtl92se_update_interrupt_mask,
|
|
.get_hw_reg = rtl92se_get_hw_reg,
|
|
.set_hw_reg = rtl92se_set_hw_reg,
|
|
.update_rate_tbl = rtl92se_update_hal_rate_tbl,
|
|
.fill_tx_desc = rtl92se_tx_fill_desc,
|
|
.fill_tx_cmddesc = rtl92se_tx_fill_cmddesc,
|
|
.query_rx_desc = rtl92se_rx_query_desc,
|
|
.set_channel_access = rtl92se_update_channel_access_setting,
|
|
.radio_onoff_checking = rtl92se_gpio_radio_on_off_checking,
|
|
.set_bw_mode = rtl92s_phy_set_bw_mode,
|
|
.switch_channel = rtl92s_phy_sw_chnl,
|
|
.dm_watchdog = rtl92s_dm_watchdog,
|
|
.scan_operation_backup = rtl92s_phy_scan_operation_backup,
|
|
.set_rf_power_state = rtl92s_phy_set_rf_power_state,
|
|
.led_control = rtl92se_led_control,
|
|
.set_desc = rtl92se_set_desc,
|
|
.get_desc = rtl92se_get_desc,
|
|
.is_tx_desc_closed = rtl92se_is_tx_desc_closed,
|
|
.tx_polling = rtl92se_tx_polling,
|
|
.enable_hw_sec = rtl92se_enable_hw_security_config,
|
|
.set_key = rtl92se_set_key,
|
|
.init_sw_leds = rtl92se_init_sw_leds,
|
|
.get_bbreg = rtl92s_phy_query_bb_reg,
|
|
.set_bbreg = rtl92s_phy_set_bb_reg,
|
|
.get_rfreg = rtl92s_phy_query_rf_reg,
|
|
.set_rfreg = rtl92s_phy_set_rf_reg,
|
|
.get_btc_status = rtl_btc_status_false,
|
|
};
|
|
|
|
static struct rtl_mod_params rtl92se_mod_params = {
|
|
.sw_crypto = false,
|
|
.inactiveps = true,
|
|
.swctrl_lps = true,
|
|
.fwctrl_lps = false,
|
|
.aspm_support = 2,
|
|
.debug_level = 0,
|
|
.debug_mask = 0,
|
|
};
|
|
|
|
/* Because memory R/W bursting will cause system hang/crash
|
|
* for 92se, so we don't read back after every write action */
|
|
static const struct rtl_hal_cfg rtl92se_hal_cfg = {
|
|
.bar_id = 1,
|
|
.write_readback = false,
|
|
.name = "rtl92s_pci",
|
|
.ops = &rtl8192se_hal_ops,
|
|
.mod_params = &rtl92se_mod_params,
|
|
|
|
.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
|
|
.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
|
|
.maps[SYS_CLK] = SYS_CLKR,
|
|
.maps[MAC_RCR_AM] = RCR_AM,
|
|
.maps[MAC_RCR_AB] = RCR_AB,
|
|
.maps[MAC_RCR_ACRC32] = RCR_ACRC32,
|
|
.maps[MAC_RCR_ACF] = RCR_ACF,
|
|
.maps[MAC_RCR_AAP] = RCR_AAP,
|
|
.maps[MAC_HIMR] = INTA_MASK,
|
|
.maps[MAC_HIMRE] = INTA_MASK + 4,
|
|
|
|
.maps[EFUSE_TEST] = REG_EFUSE_TEST,
|
|
.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
|
|
.maps[EFUSE_CLK] = REG_EFUSE_CLK,
|
|
.maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
|
|
.maps[EFUSE_PWC_EV12V] = 0, /* nouse for 8192se */
|
|
.maps[EFUSE_FEN_ELDR] = 0, /* nouse for 8192se */
|
|
.maps[EFUSE_LOADER_CLK_EN] = 0,/* nouse for 8192se */
|
|
.maps[EFUSE_ANA8M] = EFUSE_ANA8M,
|
|
.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE_92S,
|
|
.maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
|
|
.maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
|
|
.maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES,
|
|
|
|
.maps[RWCAM] = REG_RWCAM,
|
|
.maps[WCAMI] = REG_WCAMI,
|
|
.maps[RCAMO] = REG_RCAMO,
|
|
.maps[CAMDBG] = REG_CAMDBG,
|
|
.maps[SECR] = REG_SECR,
|
|
.maps[SEC_CAM_NONE] = CAM_NONE,
|
|
.maps[SEC_CAM_WEP40] = CAM_WEP40,
|
|
.maps[SEC_CAM_TKIP] = CAM_TKIP,
|
|
.maps[SEC_CAM_AES] = CAM_AES,
|
|
.maps[SEC_CAM_WEP104] = CAM_WEP104,
|
|
|
|
.maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
|
|
.maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
|
|
.maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
|
|
.maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
|
|
.maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
|
|
.maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
|
|
.maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
|
|
.maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
|
|
.maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
|
|
.maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
|
|
.maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
|
|
.maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
|
|
.maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
|
|
.maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
|
|
.maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
|
|
.maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
|
|
|
|
.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
|
|
.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
|
|
.maps[RTL_IMR_BCNINT] = IMR_BCNINT,
|
|
.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
|
|
.maps[RTL_IMR_RDU] = IMR_RDU,
|
|
.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
|
|
.maps[RTL_IMR_BDOK] = IMR_BDOK,
|
|
.maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
|
|
.maps[RTL_IMR_TBDER] = IMR_TBDER,
|
|
.maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
|
|
.maps[RTL_IMR_COMDOK] = IMR_COMDOK,
|
|
.maps[RTL_IMR_TBDOK] = IMR_TBDOK,
|
|
.maps[RTL_IMR_BKDOK] = IMR_BKDOK,
|
|
.maps[RTL_IMR_BEDOK] = IMR_BEDOK,
|
|
.maps[RTL_IMR_VIDOK] = IMR_VIDOK,
|
|
.maps[RTL_IMR_VODOK] = IMR_VODOK,
|
|
.maps[RTL_IMR_ROK] = IMR_ROK,
|
|
.maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
|
|
|
|
.maps[RTL_RC_CCK_RATE1M] = DESC_RATE1M,
|
|
.maps[RTL_RC_CCK_RATE2M] = DESC_RATE2M,
|
|
.maps[RTL_RC_CCK_RATE5_5M] = DESC_RATE5_5M,
|
|
.maps[RTL_RC_CCK_RATE11M] = DESC_RATE11M,
|
|
.maps[RTL_RC_OFDM_RATE6M] = DESC_RATE6M,
|
|
.maps[RTL_RC_OFDM_RATE9M] = DESC_RATE9M,
|
|
.maps[RTL_RC_OFDM_RATE12M] = DESC_RATE12M,
|
|
.maps[RTL_RC_OFDM_RATE18M] = DESC_RATE18M,
|
|
.maps[RTL_RC_OFDM_RATE24M] = DESC_RATE24M,
|
|
.maps[RTL_RC_OFDM_RATE36M] = DESC_RATE36M,
|
|
.maps[RTL_RC_OFDM_RATE48M] = DESC_RATE48M,
|
|
.maps[RTL_RC_OFDM_RATE54M] = DESC_RATE54M,
|
|
|
|
.maps[RTL_RC_HT_RATEMCS7] = DESC_RATEMCS7,
|
|
.maps[RTL_RC_HT_RATEMCS15] = DESC_RATEMCS15,
|
|
};
|
|
|
|
static const struct pci_device_id rtl92se_pci_ids[] = {
|
|
{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8192, rtl92se_hal_cfg)},
|
|
{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8171, rtl92se_hal_cfg)},
|
|
{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8172, rtl92se_hal_cfg)},
|
|
{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8173, rtl92se_hal_cfg)},
|
|
{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8174, rtl92se_hal_cfg)},
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, rtl92se_pci_ids);
|
|
|
|
MODULE_AUTHOR("lizhaoming <chaoming_li@realsil.com.cn>");
|
|
MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>");
|
|
MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Realtek 8192S/8191S 802.11n PCI wireless");
|
|
MODULE_FIRMWARE("rtlwifi/rtl8192sefw.bin");
|
|
|
|
module_param_named(swenc, rtl92se_mod_params.sw_crypto, bool, 0444);
|
|
module_param_named(debug_level, rtl92se_mod_params.debug_level, int, 0644);
|
|
module_param_named(debug_mask, rtl92se_mod_params.debug_mask, ullong, 0644);
|
|
module_param_named(ips, rtl92se_mod_params.inactiveps, bool, 0444);
|
|
module_param_named(swlps, rtl92se_mod_params.swctrl_lps, bool, 0444);
|
|
module_param_named(fwlps, rtl92se_mod_params.fwctrl_lps, bool, 0444);
|
|
module_param_named(aspm, rtl92se_mod_params.aspm_support, int, 0444);
|
|
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
|
|
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
|
|
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 1)\n");
|
|
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 0)\n");
|
|
MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
|
|
MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
|
|
MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
|
|
|
|
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
|
|
|
|
static struct pci_driver rtl92se_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = rtl92se_pci_ids,
|
|
.probe = rtl_pci_probe,
|
|
.remove = rtl_pci_disconnect,
|
|
.driver.pm = &rtlwifi_pm_ops,
|
|
};
|
|
|
|
module_pci_driver(rtl92se_driver);
|