1297 lines
34 KiB
C
1297 lines
34 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright(c) 2017 Oracle and/or its affiliates. All rights reserved. */
|
|
|
|
#include "ixgbe.h"
|
|
#include <net/xfrm.h>
|
|
#include <crypto/aead.h>
|
|
#include <linux/if_bridge.h>
|
|
|
|
#define IXGBE_IPSEC_KEY_BITS 160
|
|
static const char aes_gcm_name[] = "rfc4106(gcm(aes))";
|
|
|
|
static void ixgbe_ipsec_del_sa(struct xfrm_state *xs);
|
|
|
|
/**
|
|
* ixgbe_ipsec_set_tx_sa - set the Tx SA registers
|
|
* @hw: hw specific details
|
|
* @idx: register index to write
|
|
* @key: key byte array
|
|
* @salt: salt bytes
|
|
**/
|
|
static void ixgbe_ipsec_set_tx_sa(struct ixgbe_hw *hw, u16 idx,
|
|
u32 key[], u32 salt)
|
|
{
|
|
u32 reg;
|
|
int i;
|
|
|
|
for (i = 0; i < 4; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSTXKEY(i),
|
|
(__force u32)cpu_to_be32(key[3 - i]));
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSTXSALT, (__force u32)cpu_to_be32(salt));
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_IPSTXIDX);
|
|
reg &= IXGBE_RXTXIDX_IPS_EN;
|
|
reg |= idx << IXGBE_RXTXIDX_IDX_SHIFT | IXGBE_RXTXIDX_WRITE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, reg);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_set_rx_item - set an Rx table item
|
|
* @hw: hw specific details
|
|
* @idx: register index to write
|
|
* @tbl: table selector
|
|
*
|
|
* Trigger the device to store into a particular Rx table the
|
|
* data that has already been loaded into the input register
|
|
**/
|
|
static void ixgbe_ipsec_set_rx_item(struct ixgbe_hw *hw, u16 idx,
|
|
enum ixgbe_ipsec_tbl_sel tbl)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_IPSRXIDX);
|
|
reg &= IXGBE_RXTXIDX_IPS_EN;
|
|
reg |= tbl << IXGBE_RXIDX_TBL_SHIFT |
|
|
idx << IXGBE_RXTXIDX_IDX_SHIFT |
|
|
IXGBE_RXTXIDX_WRITE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, reg);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_set_rx_sa - set up the register bits to save SA info
|
|
* @hw: hw specific details
|
|
* @idx: register index to write
|
|
* @spi: security parameter index
|
|
* @key: key byte array
|
|
* @salt: salt bytes
|
|
* @mode: rx decrypt control bits
|
|
* @ip_idx: index into IP table for related IP address
|
|
**/
|
|
static void ixgbe_ipsec_set_rx_sa(struct ixgbe_hw *hw, u16 idx, __be32 spi,
|
|
u32 key[], u32 salt, u32 mode, u32 ip_idx)
|
|
{
|
|
int i;
|
|
|
|
/* store the SPI (in bigendian) and IPidx */
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSRXSPI,
|
|
(__force u32)cpu_to_le32((__force u32)spi));
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSRXIPIDX, ip_idx);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
ixgbe_ipsec_set_rx_item(hw, idx, ips_rx_spi_tbl);
|
|
|
|
/* store the key, salt, and mode */
|
|
for (i = 0; i < 4; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSRXKEY(i),
|
|
(__force u32)cpu_to_be32(key[3 - i]));
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSRXSALT, (__force u32)cpu_to_be32(salt));
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSRXMOD, mode);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
ixgbe_ipsec_set_rx_item(hw, idx, ips_rx_key_tbl);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_set_rx_ip - set up the register bits to save SA IP addr info
|
|
* @hw: hw specific details
|
|
* @idx: register index to write
|
|
* @addr: IP address byte array
|
|
**/
|
|
static void ixgbe_ipsec_set_rx_ip(struct ixgbe_hw *hw, u16 idx, __be32 addr[])
|
|
{
|
|
int i;
|
|
|
|
/* store the ip address */
|
|
for (i = 0; i < 4; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSRXIPADDR(i),
|
|
(__force u32)cpu_to_le32((__force u32)addr[i]));
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
ixgbe_ipsec_set_rx_item(hw, idx, ips_rx_ip_tbl);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_clear_hw_tables - because some tables don't get cleared on reset
|
|
* @adapter: board private structure
|
|
**/
|
|
static void ixgbe_ipsec_clear_hw_tables(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 buf[4] = {0, 0, 0, 0};
|
|
u16 idx;
|
|
|
|
/* disable Rx and Tx SA lookup */
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, 0);
|
|
|
|
/* scrub the tables - split the loops for the max of the IP table */
|
|
for (idx = 0; idx < IXGBE_IPSEC_MAX_RX_IP_COUNT; idx++) {
|
|
ixgbe_ipsec_set_tx_sa(hw, idx, buf, 0);
|
|
ixgbe_ipsec_set_rx_sa(hw, idx, 0, buf, 0, 0, 0);
|
|
ixgbe_ipsec_set_rx_ip(hw, idx, (__be32 *)buf);
|
|
}
|
|
for (; idx < IXGBE_IPSEC_MAX_SA_COUNT; idx++) {
|
|
ixgbe_ipsec_set_tx_sa(hw, idx, buf, 0);
|
|
ixgbe_ipsec_set_rx_sa(hw, idx, 0, buf, 0, 0, 0);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_stop_data
|
|
* @adapter: board private structure
|
|
**/
|
|
static void ixgbe_ipsec_stop_data(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
bool link = adapter->link_up;
|
|
u32 t_rdy, r_rdy;
|
|
u32 limit;
|
|
u32 reg;
|
|
|
|
/* halt data paths */
|
|
reg = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
|
|
reg |= IXGBE_SECTXCTRL_TX_DIS;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, reg);
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
|
|
reg |= IXGBE_SECRXCTRL_RX_DIS;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, reg);
|
|
|
|
/* If both Tx and Rx are ready there are no packets
|
|
* that we need to flush so the loopback configuration
|
|
* below is not necessary.
|
|
*/
|
|
t_rdy = IXGBE_READ_REG(hw, IXGBE_SECTXSTAT) &
|
|
IXGBE_SECTXSTAT_SECTX_RDY;
|
|
r_rdy = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT) &
|
|
IXGBE_SECRXSTAT_SECRX_RDY;
|
|
if (t_rdy && r_rdy)
|
|
return;
|
|
|
|
/* If the tx fifo doesn't have link, but still has data,
|
|
* we can't clear the tx sec block. Set the MAC loopback
|
|
* before block clear
|
|
*/
|
|
if (!link) {
|
|
reg = IXGBE_READ_REG(hw, IXGBE_MACC);
|
|
reg |= IXGBE_MACC_FLU;
|
|
IXGBE_WRITE_REG(hw, IXGBE_MACC, reg);
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
|
|
reg |= IXGBE_HLREG0_LPBK;
|
|
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
mdelay(3);
|
|
}
|
|
|
|
/* wait for the paths to empty */
|
|
limit = 20;
|
|
do {
|
|
mdelay(10);
|
|
t_rdy = IXGBE_READ_REG(hw, IXGBE_SECTXSTAT) &
|
|
IXGBE_SECTXSTAT_SECTX_RDY;
|
|
r_rdy = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT) &
|
|
IXGBE_SECRXSTAT_SECRX_RDY;
|
|
} while (!(t_rdy && r_rdy) && limit--);
|
|
|
|
/* undo loopback if we played with it earlier */
|
|
if (!link) {
|
|
reg = IXGBE_READ_REG(hw, IXGBE_MACC);
|
|
reg &= ~IXGBE_MACC_FLU;
|
|
IXGBE_WRITE_REG(hw, IXGBE_MACC, reg);
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
|
|
reg &= ~IXGBE_HLREG0_LPBK;
|
|
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_stop_engine
|
|
* @adapter: board private structure
|
|
**/
|
|
static void ixgbe_ipsec_stop_engine(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 reg;
|
|
|
|
ixgbe_ipsec_stop_data(adapter);
|
|
|
|
/* disable Rx and Tx SA lookup */
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, 0);
|
|
|
|
/* disable the Rx and Tx engines and full packet store-n-forward */
|
|
reg = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
|
|
reg |= IXGBE_SECTXCTRL_SECTX_DIS;
|
|
reg &= ~IXGBE_SECTXCTRL_STORE_FORWARD;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, reg);
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
|
|
reg |= IXGBE_SECRXCTRL_SECRX_DIS;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, reg);
|
|
|
|
/* restore the "tx security buffer almost full threshold" to 0x250 */
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECTXBUFFAF, 0x250);
|
|
|
|
/* Set minimum IFG between packets back to the default 0x1 */
|
|
reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
|
|
reg = (reg & 0xfffffff0) | 0x1;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg);
|
|
|
|
/* final set for normal (no ipsec offload) processing */
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, IXGBE_SECTXCTRL_SECTX_DIS);
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, IXGBE_SECRXCTRL_SECRX_DIS);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_start_engine
|
|
* @adapter: board private structure
|
|
*
|
|
* NOTE: this increases power consumption whether being used or not
|
|
**/
|
|
static void ixgbe_ipsec_start_engine(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 reg;
|
|
|
|
ixgbe_ipsec_stop_data(adapter);
|
|
|
|
/* Set minimum IFG between packets to 3 */
|
|
reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
|
|
reg = (reg & 0xfffffff0) | 0x3;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg);
|
|
|
|
/* Set "tx security buffer almost full threshold" to 0x15 so that the
|
|
* almost full indication is generated only after buffer contains at
|
|
* least an entire jumbo packet.
|
|
*/
|
|
reg = IXGBE_READ_REG(hw, IXGBE_SECTXBUFFAF);
|
|
reg = (reg & 0xfffffc00) | 0x15;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECTXBUFFAF, reg);
|
|
|
|
/* restart the data paths by clearing the DISABLE bits */
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, IXGBE_SECTXCTRL_STORE_FORWARD);
|
|
|
|
/* enable Rx and Tx SA lookup */
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, IXGBE_RXTXIDX_IPS_EN);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, IXGBE_RXTXIDX_IPS_EN);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_restore - restore the ipsec HW settings after a reset
|
|
* @adapter: board private structure
|
|
*
|
|
* Reload the HW tables from the SW tables after they've been bashed
|
|
* by a chip reset.
|
|
*
|
|
* Any VF entries are removed from the SW and HW tables since either
|
|
* (a) the VF also gets reset on PF reset and will ask again for the
|
|
* offloads, or (b) the VF has been removed by a change in the num_vfs.
|
|
**/
|
|
void ixgbe_ipsec_restore(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_ipsec *ipsec = adapter->ipsec;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int i;
|
|
|
|
if (!(adapter->flags2 & IXGBE_FLAG2_IPSEC_ENABLED))
|
|
return;
|
|
|
|
/* clean up and restart the engine */
|
|
ixgbe_ipsec_stop_engine(adapter);
|
|
ixgbe_ipsec_clear_hw_tables(adapter);
|
|
ixgbe_ipsec_start_engine(adapter);
|
|
|
|
/* reload the Rx and Tx keys */
|
|
for (i = 0; i < IXGBE_IPSEC_MAX_SA_COUNT; i++) {
|
|
struct rx_sa *r = &ipsec->rx_tbl[i];
|
|
struct tx_sa *t = &ipsec->tx_tbl[i];
|
|
|
|
if (r->used) {
|
|
if (r->mode & IXGBE_RXTXMOD_VF)
|
|
ixgbe_ipsec_del_sa(r->xs);
|
|
else
|
|
ixgbe_ipsec_set_rx_sa(hw, i, r->xs->id.spi,
|
|
r->key, r->salt,
|
|
r->mode, r->iptbl_ind);
|
|
}
|
|
|
|
if (t->used) {
|
|
if (t->mode & IXGBE_RXTXMOD_VF)
|
|
ixgbe_ipsec_del_sa(t->xs);
|
|
else
|
|
ixgbe_ipsec_set_tx_sa(hw, i, t->key, t->salt);
|
|
}
|
|
}
|
|
|
|
/* reload the IP addrs */
|
|
for (i = 0; i < IXGBE_IPSEC_MAX_RX_IP_COUNT; i++) {
|
|
struct rx_ip_sa *ipsa = &ipsec->ip_tbl[i];
|
|
|
|
if (ipsa->used)
|
|
ixgbe_ipsec_set_rx_ip(hw, i, ipsa->ipaddr);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_find_empty_idx - find the first unused security parameter index
|
|
* @ipsec: pointer to ipsec struct
|
|
* @rxtable: true if we need to look in the Rx table
|
|
*
|
|
* Returns the first unused index in either the Rx or Tx SA table
|
|
**/
|
|
static int ixgbe_ipsec_find_empty_idx(struct ixgbe_ipsec *ipsec, bool rxtable)
|
|
{
|
|
u32 i;
|
|
|
|
if (rxtable) {
|
|
if (ipsec->num_rx_sa == IXGBE_IPSEC_MAX_SA_COUNT)
|
|
return -ENOSPC;
|
|
|
|
/* search rx sa table */
|
|
for (i = 0; i < IXGBE_IPSEC_MAX_SA_COUNT; i++) {
|
|
if (!ipsec->rx_tbl[i].used)
|
|
return i;
|
|
}
|
|
} else {
|
|
if (ipsec->num_tx_sa == IXGBE_IPSEC_MAX_SA_COUNT)
|
|
return -ENOSPC;
|
|
|
|
/* search tx sa table */
|
|
for (i = 0; i < IXGBE_IPSEC_MAX_SA_COUNT; i++) {
|
|
if (!ipsec->tx_tbl[i].used)
|
|
return i;
|
|
}
|
|
}
|
|
|
|
return -ENOSPC;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_find_rx_state - find the state that matches
|
|
* @ipsec: pointer to ipsec struct
|
|
* @daddr: inbound address to match
|
|
* @proto: protocol to match
|
|
* @spi: SPI to match
|
|
* @ip4: true if using an ipv4 address
|
|
*
|
|
* Returns a pointer to the matching SA state information
|
|
**/
|
|
static struct xfrm_state *ixgbe_ipsec_find_rx_state(struct ixgbe_ipsec *ipsec,
|
|
__be32 *daddr, u8 proto,
|
|
__be32 spi, bool ip4)
|
|
{
|
|
struct rx_sa *rsa;
|
|
struct xfrm_state *ret = NULL;
|
|
|
|
rcu_read_lock();
|
|
hash_for_each_possible_rcu(ipsec->rx_sa_list, rsa, hlist,
|
|
(__force u32)spi) {
|
|
if (rsa->mode & IXGBE_RXTXMOD_VF)
|
|
continue;
|
|
if (spi == rsa->xs->id.spi &&
|
|
((ip4 && *daddr == rsa->xs->id.daddr.a4) ||
|
|
(!ip4 && !memcmp(daddr, &rsa->xs->id.daddr.a6,
|
|
sizeof(rsa->xs->id.daddr.a6)))) &&
|
|
proto == rsa->xs->id.proto) {
|
|
ret = rsa->xs;
|
|
xfrm_state_hold(ret);
|
|
break;
|
|
}
|
|
}
|
|
rcu_read_unlock();
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_parse_proto_keys - find the key and salt based on the protocol
|
|
* @xs: pointer to xfrm_state struct
|
|
* @mykey: pointer to key array to populate
|
|
* @mysalt: pointer to salt value to populate
|
|
*
|
|
* This copies the protocol keys and salt to our own data tables. The
|
|
* 82599 family only supports the one algorithm.
|
|
**/
|
|
static int ixgbe_ipsec_parse_proto_keys(struct xfrm_state *xs,
|
|
u32 *mykey, u32 *mysalt)
|
|
{
|
|
struct net_device *dev = xs->xso.dev;
|
|
unsigned char *key_data;
|
|
char *alg_name = NULL;
|
|
int key_len;
|
|
|
|
if (!xs->aead) {
|
|
netdev_err(dev, "Unsupported IPsec algorithm\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (xs->aead->alg_icv_len != IXGBE_IPSEC_AUTH_BITS) {
|
|
netdev_err(dev, "IPsec offload requires %d bit authentication\n",
|
|
IXGBE_IPSEC_AUTH_BITS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
key_data = &xs->aead->alg_key[0];
|
|
key_len = xs->aead->alg_key_len;
|
|
alg_name = xs->aead->alg_name;
|
|
|
|
if (strcmp(alg_name, aes_gcm_name)) {
|
|
netdev_err(dev, "Unsupported IPsec algorithm - please use %s\n",
|
|
aes_gcm_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The key bytes come down in a bigendian array of bytes, so
|
|
* we don't need to do any byteswapping.
|
|
* 160 accounts for 16 byte key and 4 byte salt
|
|
*/
|
|
if (key_len == IXGBE_IPSEC_KEY_BITS) {
|
|
*mysalt = ((u32 *)key_data)[4];
|
|
} else if (key_len != (IXGBE_IPSEC_KEY_BITS - (sizeof(*mysalt) * 8))) {
|
|
netdev_err(dev, "IPsec hw offload only supports keys up to 128 bits with a 32 bit salt\n");
|
|
return -EINVAL;
|
|
} else {
|
|
netdev_info(dev, "IPsec hw offload parameters missing 32 bit salt value\n");
|
|
*mysalt = 0;
|
|
}
|
|
memcpy(mykey, key_data, 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_check_mgmt_ip - make sure there is no clash with mgmt IP filters
|
|
* @xs: pointer to transformer state struct
|
|
**/
|
|
static int ixgbe_ipsec_check_mgmt_ip(struct xfrm_state *xs)
|
|
{
|
|
struct net_device *dev = xs->xso.dev;
|
|
struct ixgbe_adapter *adapter = netdev_priv(dev);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 mfval, manc, reg;
|
|
int num_filters = 4;
|
|
bool manc_ipv4;
|
|
u32 bmcipval;
|
|
int i, j;
|
|
|
|
#define MANC_EN_IPV4_FILTER BIT(24)
|
|
#define MFVAL_IPV4_FILTER_SHIFT 16
|
|
#define MFVAL_IPV6_FILTER_SHIFT 24
|
|
#define MIPAF_ARR(_m, _n) (IXGBE_MIPAF + ((_m) * 0x10) + ((_n) * 4))
|
|
|
|
#define IXGBE_BMCIP(_n) (0x5050 + ((_n) * 4))
|
|
#define IXGBE_BMCIPVAL 0x5060
|
|
#define BMCIP_V4 0x2
|
|
#define BMCIP_V6 0x3
|
|
#define BMCIP_MASK 0x3
|
|
|
|
manc = IXGBE_READ_REG(hw, IXGBE_MANC);
|
|
manc_ipv4 = !!(manc & MANC_EN_IPV4_FILTER);
|
|
mfval = IXGBE_READ_REG(hw, IXGBE_MFVAL);
|
|
bmcipval = IXGBE_READ_REG(hw, IXGBE_BMCIPVAL);
|
|
|
|
if (xs->props.family == AF_INET) {
|
|
/* are there any IPv4 filters to check? */
|
|
if (manc_ipv4) {
|
|
/* the 4 ipv4 filters are all in MIPAF(3, i) */
|
|
for (i = 0; i < num_filters; i++) {
|
|
if (!(mfval & BIT(MFVAL_IPV4_FILTER_SHIFT + i)))
|
|
continue;
|
|
|
|
reg = IXGBE_READ_REG(hw, MIPAF_ARR(3, i));
|
|
if (reg == xs->id.daddr.a4)
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
if ((bmcipval & BMCIP_MASK) == BMCIP_V4) {
|
|
reg = IXGBE_READ_REG(hw, IXGBE_BMCIP(3));
|
|
if (reg == xs->id.daddr.a4)
|
|
return 1;
|
|
}
|
|
|
|
} else {
|
|
/* if there are ipv4 filters, they are in the last ipv6 slot */
|
|
if (manc_ipv4)
|
|
num_filters = 3;
|
|
|
|
for (i = 0; i < num_filters; i++) {
|
|
if (!(mfval & BIT(MFVAL_IPV6_FILTER_SHIFT + i)))
|
|
continue;
|
|
|
|
for (j = 0; j < 4; j++) {
|
|
reg = IXGBE_READ_REG(hw, MIPAF_ARR(i, j));
|
|
if (reg != xs->id.daddr.a6[j])
|
|
break;
|
|
}
|
|
if (j == 4) /* did we match all 4 words? */
|
|
return 1;
|
|
}
|
|
|
|
if ((bmcipval & BMCIP_MASK) == BMCIP_V6) {
|
|
for (j = 0; j < 4; j++) {
|
|
reg = IXGBE_READ_REG(hw, IXGBE_BMCIP(j));
|
|
if (reg != xs->id.daddr.a6[j])
|
|
break;
|
|
}
|
|
if (j == 4) /* did we match all 4 words? */
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_add_sa - program device with a security association
|
|
* @xs: pointer to transformer state struct
|
|
**/
|
|
static int ixgbe_ipsec_add_sa(struct xfrm_state *xs)
|
|
{
|
|
struct net_device *dev = xs->xso.dev;
|
|
struct ixgbe_adapter *adapter = netdev_priv(dev);
|
|
struct ixgbe_ipsec *ipsec = adapter->ipsec;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int checked, match, first;
|
|
u16 sa_idx;
|
|
int ret;
|
|
int i;
|
|
|
|
if (xs->id.proto != IPPROTO_ESP && xs->id.proto != IPPROTO_AH) {
|
|
netdev_err(dev, "Unsupported protocol 0x%04x for ipsec offload\n",
|
|
xs->id.proto);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ixgbe_ipsec_check_mgmt_ip(xs)) {
|
|
netdev_err(dev, "IPsec IP addr clash with mgmt filters\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) {
|
|
struct rx_sa rsa;
|
|
|
|
if (xs->calg) {
|
|
netdev_err(dev, "Compression offload not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* find the first unused index */
|
|
ret = ixgbe_ipsec_find_empty_idx(ipsec, true);
|
|
if (ret < 0) {
|
|
netdev_err(dev, "No space for SA in Rx table!\n");
|
|
return ret;
|
|
}
|
|
sa_idx = (u16)ret;
|
|
|
|
memset(&rsa, 0, sizeof(rsa));
|
|
rsa.used = true;
|
|
rsa.xs = xs;
|
|
|
|
if (rsa.xs->id.proto & IPPROTO_ESP)
|
|
rsa.decrypt = xs->ealg || xs->aead;
|
|
|
|
/* get the key and salt */
|
|
ret = ixgbe_ipsec_parse_proto_keys(xs, rsa.key, &rsa.salt);
|
|
if (ret) {
|
|
netdev_err(dev, "Failed to get key data for Rx SA table\n");
|
|
return ret;
|
|
}
|
|
|
|
/* get ip for rx sa table */
|
|
if (xs->props.family == AF_INET6)
|
|
memcpy(rsa.ipaddr, &xs->id.daddr.a6, 16);
|
|
else
|
|
memcpy(&rsa.ipaddr[3], &xs->id.daddr.a4, 4);
|
|
|
|
/* The HW does not have a 1:1 mapping from keys to IP addrs, so
|
|
* check for a matching IP addr entry in the table. If the addr
|
|
* already exists, use it; else find an unused slot and add the
|
|
* addr. If one does not exist and there are no unused table
|
|
* entries, fail the request.
|
|
*/
|
|
|
|
/* Find an existing match or first not used, and stop looking
|
|
* after we've checked all we know we have.
|
|
*/
|
|
checked = 0;
|
|
match = -1;
|
|
first = -1;
|
|
for (i = 0;
|
|
i < IXGBE_IPSEC_MAX_RX_IP_COUNT &&
|
|
(checked < ipsec->num_rx_sa || first < 0);
|
|
i++) {
|
|
if (ipsec->ip_tbl[i].used) {
|
|
if (!memcmp(ipsec->ip_tbl[i].ipaddr,
|
|
rsa.ipaddr, sizeof(rsa.ipaddr))) {
|
|
match = i;
|
|
break;
|
|
}
|
|
checked++;
|
|
} else if (first < 0) {
|
|
first = i; /* track the first empty seen */
|
|
}
|
|
}
|
|
|
|
if (ipsec->num_rx_sa == 0)
|
|
first = 0;
|
|
|
|
if (match >= 0) {
|
|
/* addrs are the same, we should use this one */
|
|
rsa.iptbl_ind = match;
|
|
ipsec->ip_tbl[match].ref_cnt++;
|
|
|
|
} else if (first >= 0) {
|
|
/* no matches, but here's an empty slot */
|
|
rsa.iptbl_ind = first;
|
|
|
|
memcpy(ipsec->ip_tbl[first].ipaddr,
|
|
rsa.ipaddr, sizeof(rsa.ipaddr));
|
|
ipsec->ip_tbl[first].ref_cnt = 1;
|
|
ipsec->ip_tbl[first].used = true;
|
|
|
|
ixgbe_ipsec_set_rx_ip(hw, rsa.iptbl_ind, rsa.ipaddr);
|
|
|
|
} else {
|
|
/* no match and no empty slot */
|
|
netdev_err(dev, "No space for SA in Rx IP SA table\n");
|
|
memset(&rsa, 0, sizeof(rsa));
|
|
return -ENOSPC;
|
|
}
|
|
|
|
rsa.mode = IXGBE_RXMOD_VALID;
|
|
if (rsa.xs->id.proto & IPPROTO_ESP)
|
|
rsa.mode |= IXGBE_RXMOD_PROTO_ESP;
|
|
if (rsa.decrypt)
|
|
rsa.mode |= IXGBE_RXMOD_DECRYPT;
|
|
if (rsa.xs->props.family == AF_INET6)
|
|
rsa.mode |= IXGBE_RXMOD_IPV6;
|
|
|
|
/* the preparations worked, so save the info */
|
|
memcpy(&ipsec->rx_tbl[sa_idx], &rsa, sizeof(rsa));
|
|
|
|
ixgbe_ipsec_set_rx_sa(hw, sa_idx, rsa.xs->id.spi, rsa.key,
|
|
rsa.salt, rsa.mode, rsa.iptbl_ind);
|
|
xs->xso.offload_handle = sa_idx + IXGBE_IPSEC_BASE_RX_INDEX;
|
|
|
|
ipsec->num_rx_sa++;
|
|
|
|
/* hash the new entry for faster search in Rx path */
|
|
hash_add_rcu(ipsec->rx_sa_list, &ipsec->rx_tbl[sa_idx].hlist,
|
|
(__force u32)rsa.xs->id.spi);
|
|
} else {
|
|
struct tx_sa tsa;
|
|
|
|
if (adapter->num_vfs &&
|
|
adapter->bridge_mode != BRIDGE_MODE_VEPA)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* find the first unused index */
|
|
ret = ixgbe_ipsec_find_empty_idx(ipsec, false);
|
|
if (ret < 0) {
|
|
netdev_err(dev, "No space for SA in Tx table\n");
|
|
return ret;
|
|
}
|
|
sa_idx = (u16)ret;
|
|
|
|
memset(&tsa, 0, sizeof(tsa));
|
|
tsa.used = true;
|
|
tsa.xs = xs;
|
|
|
|
if (xs->id.proto & IPPROTO_ESP)
|
|
tsa.encrypt = xs->ealg || xs->aead;
|
|
|
|
ret = ixgbe_ipsec_parse_proto_keys(xs, tsa.key, &tsa.salt);
|
|
if (ret) {
|
|
netdev_err(dev, "Failed to get key data for Tx SA table\n");
|
|
memset(&tsa, 0, sizeof(tsa));
|
|
return ret;
|
|
}
|
|
|
|
/* the preparations worked, so save the info */
|
|
memcpy(&ipsec->tx_tbl[sa_idx], &tsa, sizeof(tsa));
|
|
|
|
ixgbe_ipsec_set_tx_sa(hw, sa_idx, tsa.key, tsa.salt);
|
|
|
|
xs->xso.offload_handle = sa_idx + IXGBE_IPSEC_BASE_TX_INDEX;
|
|
|
|
ipsec->num_tx_sa++;
|
|
}
|
|
|
|
/* enable the engine if not already warmed up */
|
|
if (!(adapter->flags2 & IXGBE_FLAG2_IPSEC_ENABLED)) {
|
|
ixgbe_ipsec_start_engine(adapter);
|
|
adapter->flags2 |= IXGBE_FLAG2_IPSEC_ENABLED;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_del_sa - clear out this specific SA
|
|
* @xs: pointer to transformer state struct
|
|
**/
|
|
static void ixgbe_ipsec_del_sa(struct xfrm_state *xs)
|
|
{
|
|
struct net_device *dev = xs->xso.dev;
|
|
struct ixgbe_adapter *adapter = netdev_priv(dev);
|
|
struct ixgbe_ipsec *ipsec = adapter->ipsec;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 zerobuf[4] = {0, 0, 0, 0};
|
|
u16 sa_idx;
|
|
|
|
if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) {
|
|
struct rx_sa *rsa;
|
|
u8 ipi;
|
|
|
|
sa_idx = xs->xso.offload_handle - IXGBE_IPSEC_BASE_RX_INDEX;
|
|
rsa = &ipsec->rx_tbl[sa_idx];
|
|
|
|
if (!rsa->used) {
|
|
netdev_err(dev, "Invalid Rx SA selected sa_idx=%d offload_handle=%lu\n",
|
|
sa_idx, xs->xso.offload_handle);
|
|
return;
|
|
}
|
|
|
|
ixgbe_ipsec_set_rx_sa(hw, sa_idx, 0, zerobuf, 0, 0, 0);
|
|
hash_del_rcu(&rsa->hlist);
|
|
|
|
/* if the IP table entry is referenced by only this SA,
|
|
* i.e. ref_cnt is only 1, clear the IP table entry as well
|
|
*/
|
|
ipi = rsa->iptbl_ind;
|
|
if (ipsec->ip_tbl[ipi].ref_cnt > 0) {
|
|
ipsec->ip_tbl[ipi].ref_cnt--;
|
|
|
|
if (!ipsec->ip_tbl[ipi].ref_cnt) {
|
|
memset(&ipsec->ip_tbl[ipi], 0,
|
|
sizeof(struct rx_ip_sa));
|
|
ixgbe_ipsec_set_rx_ip(hw, ipi,
|
|
(__force __be32 *)zerobuf);
|
|
}
|
|
}
|
|
|
|
memset(rsa, 0, sizeof(struct rx_sa));
|
|
ipsec->num_rx_sa--;
|
|
} else {
|
|
sa_idx = xs->xso.offload_handle - IXGBE_IPSEC_BASE_TX_INDEX;
|
|
|
|
if (!ipsec->tx_tbl[sa_idx].used) {
|
|
netdev_err(dev, "Invalid Tx SA selected sa_idx=%d offload_handle=%lu\n",
|
|
sa_idx, xs->xso.offload_handle);
|
|
return;
|
|
}
|
|
|
|
ixgbe_ipsec_set_tx_sa(hw, sa_idx, zerobuf, 0);
|
|
memset(&ipsec->tx_tbl[sa_idx], 0, sizeof(struct tx_sa));
|
|
ipsec->num_tx_sa--;
|
|
}
|
|
|
|
/* if there are no SAs left, stop the engine to save energy */
|
|
if (ipsec->num_rx_sa == 0 && ipsec->num_tx_sa == 0) {
|
|
adapter->flags2 &= ~IXGBE_FLAG2_IPSEC_ENABLED;
|
|
ixgbe_ipsec_stop_engine(adapter);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_offload_ok - can this packet use the xfrm hw offload
|
|
* @skb: current data packet
|
|
* @xs: pointer to transformer state struct
|
|
**/
|
|
static bool ixgbe_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs)
|
|
{
|
|
if (xs->props.family == AF_INET) {
|
|
/* Offload with IPv4 options is not supported yet */
|
|
if (ip_hdr(skb)->ihl != 5)
|
|
return false;
|
|
} else {
|
|
/* Offload with IPv6 extension headers is not support yet */
|
|
if (ipv6_ext_hdr(ipv6_hdr(skb)->nexthdr))
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static const struct xfrmdev_ops ixgbe_xfrmdev_ops = {
|
|
.xdo_dev_state_add = ixgbe_ipsec_add_sa,
|
|
.xdo_dev_state_delete = ixgbe_ipsec_del_sa,
|
|
.xdo_dev_offload_ok = ixgbe_ipsec_offload_ok,
|
|
};
|
|
|
|
/**
|
|
* ixgbe_ipsec_vf_clear - clear the tables of data for a VF
|
|
* @adapter: board private structure
|
|
* @vf: VF id to be removed
|
|
**/
|
|
void ixgbe_ipsec_vf_clear(struct ixgbe_adapter *adapter, u32 vf)
|
|
{
|
|
struct ixgbe_ipsec *ipsec = adapter->ipsec;
|
|
int i;
|
|
|
|
if (!ipsec)
|
|
return;
|
|
|
|
/* search rx sa table */
|
|
for (i = 0; i < IXGBE_IPSEC_MAX_SA_COUNT && ipsec->num_rx_sa; i++) {
|
|
if (!ipsec->rx_tbl[i].used)
|
|
continue;
|
|
if (ipsec->rx_tbl[i].mode & IXGBE_RXTXMOD_VF &&
|
|
ipsec->rx_tbl[i].vf == vf)
|
|
ixgbe_ipsec_del_sa(ipsec->rx_tbl[i].xs);
|
|
}
|
|
|
|
/* search tx sa table */
|
|
for (i = 0; i < IXGBE_IPSEC_MAX_SA_COUNT && ipsec->num_tx_sa; i++) {
|
|
if (!ipsec->tx_tbl[i].used)
|
|
continue;
|
|
if (ipsec->tx_tbl[i].mode & IXGBE_RXTXMOD_VF &&
|
|
ipsec->tx_tbl[i].vf == vf)
|
|
ixgbe_ipsec_del_sa(ipsec->tx_tbl[i].xs);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_vf_add_sa - translate VF request to SA add
|
|
* @adapter: board private structure
|
|
* @msgbuf: The message buffer
|
|
* @vf: the VF index
|
|
*
|
|
* Make up a new xs and algorithm info from the data sent by the VF.
|
|
* We only need to sketch in just enough to set up the HW offload.
|
|
* Put the resulting offload_handle into the return message to the VF.
|
|
*
|
|
* Returns 0 or error value
|
|
**/
|
|
int ixgbe_ipsec_vf_add_sa(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
|
|
{
|
|
struct ixgbe_ipsec *ipsec = adapter->ipsec;
|
|
struct xfrm_algo_desc *algo;
|
|
struct sa_mbx_msg *sam;
|
|
struct xfrm_state *xs;
|
|
size_t aead_len;
|
|
u16 sa_idx;
|
|
u32 pfsa;
|
|
int err;
|
|
|
|
sam = (struct sa_mbx_msg *)(&msgbuf[1]);
|
|
if (!adapter->vfinfo[vf].trusted ||
|
|
!(adapter->flags2 & IXGBE_FLAG2_VF_IPSEC_ENABLED)) {
|
|
e_warn(drv, "VF %d attempted to add an IPsec SA\n", vf);
|
|
err = -EACCES;
|
|
goto err_out;
|
|
}
|
|
|
|
/* Tx IPsec offload doesn't seem to work on this
|
|
* device, so block these requests for now.
|
|
*/
|
|
if (!(sam->flags & XFRM_OFFLOAD_INBOUND)) {
|
|
err = -EOPNOTSUPP;
|
|
goto err_out;
|
|
}
|
|
|
|
xs = kzalloc(sizeof(*xs), GFP_KERNEL);
|
|
if (unlikely(!xs)) {
|
|
err = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
xs->xso.flags = sam->flags;
|
|
xs->id.spi = sam->spi;
|
|
xs->id.proto = sam->proto;
|
|
xs->props.family = sam->family;
|
|
if (xs->props.family == AF_INET6)
|
|
memcpy(&xs->id.daddr.a6, sam->addr, sizeof(xs->id.daddr.a6));
|
|
else
|
|
memcpy(&xs->id.daddr.a4, sam->addr, sizeof(xs->id.daddr.a4));
|
|
xs->xso.dev = adapter->netdev;
|
|
|
|
algo = xfrm_aead_get_byname(aes_gcm_name, IXGBE_IPSEC_AUTH_BITS, 1);
|
|
if (unlikely(!algo)) {
|
|
err = -ENOENT;
|
|
goto err_xs;
|
|
}
|
|
|
|
aead_len = sizeof(*xs->aead) + IXGBE_IPSEC_KEY_BITS / 8;
|
|
xs->aead = kzalloc(aead_len, GFP_KERNEL);
|
|
if (unlikely(!xs->aead)) {
|
|
err = -ENOMEM;
|
|
goto err_xs;
|
|
}
|
|
|
|
xs->props.ealgo = algo->desc.sadb_alg_id;
|
|
xs->geniv = algo->uinfo.aead.geniv;
|
|
xs->aead->alg_icv_len = IXGBE_IPSEC_AUTH_BITS;
|
|
xs->aead->alg_key_len = IXGBE_IPSEC_KEY_BITS;
|
|
memcpy(xs->aead->alg_key, sam->key, sizeof(sam->key));
|
|
memcpy(xs->aead->alg_name, aes_gcm_name, sizeof(aes_gcm_name));
|
|
|
|
/* set up the HW offload */
|
|
err = ixgbe_ipsec_add_sa(xs);
|
|
if (err)
|
|
goto err_aead;
|
|
|
|
pfsa = xs->xso.offload_handle;
|
|
if (pfsa < IXGBE_IPSEC_BASE_TX_INDEX) {
|
|
sa_idx = pfsa - IXGBE_IPSEC_BASE_RX_INDEX;
|
|
ipsec->rx_tbl[sa_idx].vf = vf;
|
|
ipsec->rx_tbl[sa_idx].mode |= IXGBE_RXTXMOD_VF;
|
|
} else {
|
|
sa_idx = pfsa - IXGBE_IPSEC_BASE_TX_INDEX;
|
|
ipsec->tx_tbl[sa_idx].vf = vf;
|
|
ipsec->tx_tbl[sa_idx].mode |= IXGBE_RXTXMOD_VF;
|
|
}
|
|
|
|
msgbuf[1] = xs->xso.offload_handle;
|
|
|
|
return 0;
|
|
|
|
err_aead:
|
|
kzfree(xs->aead);
|
|
err_xs:
|
|
kzfree(xs);
|
|
err_out:
|
|
msgbuf[1] = err;
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_vf_del_sa - translate VF request to SA delete
|
|
* @adapter: board private structure
|
|
* @msgbuf: The message buffer
|
|
* @vf: the VF index
|
|
*
|
|
* Given the offload_handle sent by the VF, look for the related SA table
|
|
* entry and use its xs field to call for a delete of the SA.
|
|
*
|
|
* Note: We silently ignore requests to delete entries that are already
|
|
* set to unused because when a VF is set to "DOWN", the PF first
|
|
* gets a reset and clears all the VF's entries; then the VF's
|
|
* XFRM stack sends individual deletes for each entry, which the
|
|
* reset already removed. In the future it might be good to try to
|
|
* optimize this so not so many unnecessary delete messages are sent.
|
|
*
|
|
* Returns 0 or error value
|
|
**/
|
|
int ixgbe_ipsec_vf_del_sa(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
|
|
{
|
|
struct ixgbe_ipsec *ipsec = adapter->ipsec;
|
|
struct xfrm_state *xs;
|
|
u32 pfsa = msgbuf[1];
|
|
u16 sa_idx;
|
|
|
|
if (!adapter->vfinfo[vf].trusted) {
|
|
e_err(drv, "vf %d attempted to delete an SA\n", vf);
|
|
return -EPERM;
|
|
}
|
|
|
|
if (pfsa < IXGBE_IPSEC_BASE_TX_INDEX) {
|
|
struct rx_sa *rsa;
|
|
|
|
sa_idx = pfsa - IXGBE_IPSEC_BASE_RX_INDEX;
|
|
if (sa_idx >= IXGBE_IPSEC_MAX_SA_COUNT) {
|
|
e_err(drv, "vf %d SA index %d out of range\n",
|
|
vf, sa_idx);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rsa = &ipsec->rx_tbl[sa_idx];
|
|
|
|
if (!rsa->used)
|
|
return 0;
|
|
|
|
if (!(rsa->mode & IXGBE_RXTXMOD_VF) ||
|
|
rsa->vf != vf) {
|
|
e_err(drv, "vf %d bad Rx SA index %d\n", vf, sa_idx);
|
|
return -ENOENT;
|
|
}
|
|
|
|
xs = ipsec->rx_tbl[sa_idx].xs;
|
|
} else {
|
|
struct tx_sa *tsa;
|
|
|
|
sa_idx = pfsa - IXGBE_IPSEC_BASE_TX_INDEX;
|
|
if (sa_idx >= IXGBE_IPSEC_MAX_SA_COUNT) {
|
|
e_err(drv, "vf %d SA index %d out of range\n",
|
|
vf, sa_idx);
|
|
return -EINVAL;
|
|
}
|
|
|
|
tsa = &ipsec->tx_tbl[sa_idx];
|
|
|
|
if (!tsa->used)
|
|
return 0;
|
|
|
|
if (!(tsa->mode & IXGBE_RXTXMOD_VF) ||
|
|
tsa->vf != vf) {
|
|
e_err(drv, "vf %d bad Tx SA index %d\n", vf, sa_idx);
|
|
return -ENOENT;
|
|
}
|
|
|
|
xs = ipsec->tx_tbl[sa_idx].xs;
|
|
}
|
|
|
|
ixgbe_ipsec_del_sa(xs);
|
|
|
|
/* remove the xs that was made-up in the add request */
|
|
kzfree(xs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_tx - setup Tx flags for ipsec offload
|
|
* @tx_ring: outgoing context
|
|
* @first: current data packet
|
|
* @itd: ipsec Tx data for later use in building context descriptor
|
|
**/
|
|
int ixgbe_ipsec_tx(struct ixgbe_ring *tx_ring,
|
|
struct ixgbe_tx_buffer *first,
|
|
struct ixgbe_ipsec_tx_data *itd)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(tx_ring->netdev);
|
|
struct ixgbe_ipsec *ipsec = adapter->ipsec;
|
|
struct xfrm_state *xs;
|
|
struct sec_path *sp;
|
|
struct tx_sa *tsa;
|
|
|
|
sp = skb_sec_path(first->skb);
|
|
if (unlikely(!sp->len)) {
|
|
netdev_err(tx_ring->netdev, "%s: no xfrm state len = %d\n",
|
|
__func__, sp->len);
|
|
return 0;
|
|
}
|
|
|
|
xs = xfrm_input_state(first->skb);
|
|
if (unlikely(!xs)) {
|
|
netdev_err(tx_ring->netdev, "%s: no xfrm_input_state() xs = %p\n",
|
|
__func__, xs);
|
|
return 0;
|
|
}
|
|
|
|
itd->sa_idx = xs->xso.offload_handle - IXGBE_IPSEC_BASE_TX_INDEX;
|
|
if (unlikely(itd->sa_idx >= IXGBE_IPSEC_MAX_SA_COUNT)) {
|
|
netdev_err(tx_ring->netdev, "%s: bad sa_idx=%d handle=%lu\n",
|
|
__func__, itd->sa_idx, xs->xso.offload_handle);
|
|
return 0;
|
|
}
|
|
|
|
tsa = &ipsec->tx_tbl[itd->sa_idx];
|
|
if (unlikely(!tsa->used)) {
|
|
netdev_err(tx_ring->netdev, "%s: unused sa_idx=%d\n",
|
|
__func__, itd->sa_idx);
|
|
return 0;
|
|
}
|
|
|
|
first->tx_flags |= IXGBE_TX_FLAGS_IPSEC | IXGBE_TX_FLAGS_CC;
|
|
|
|
if (xs->id.proto == IPPROTO_ESP) {
|
|
|
|
itd->flags |= IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP |
|
|
IXGBE_ADVTXD_TUCMD_L4T_TCP;
|
|
if (first->protocol == htons(ETH_P_IP))
|
|
itd->flags |= IXGBE_ADVTXD_TUCMD_IPV4;
|
|
|
|
/* The actual trailer length is authlen (16 bytes) plus
|
|
* 2 bytes for the proto and the padlen values, plus
|
|
* padlen bytes of padding. This ends up not the same
|
|
* as the static value found in xs->props.trailer_len (21).
|
|
*
|
|
* ... but if we're doing GSO, don't bother as the stack
|
|
* doesn't add a trailer for those.
|
|
*/
|
|
if (!skb_is_gso(first->skb)) {
|
|
/* The "correct" way to get the auth length would be
|
|
* to use
|
|
* authlen = crypto_aead_authsize(xs->data);
|
|
* but since we know we only have one size to worry
|
|
* about * we can let the compiler use the constant
|
|
* and save us a few CPU cycles.
|
|
*/
|
|
const int authlen = IXGBE_IPSEC_AUTH_BITS / 8;
|
|
struct sk_buff *skb = first->skb;
|
|
u8 padlen;
|
|
int ret;
|
|
|
|
ret = skb_copy_bits(skb, skb->len - (authlen + 2),
|
|
&padlen, 1);
|
|
if (unlikely(ret))
|
|
return 0;
|
|
itd->trailer_len = authlen + 2 + padlen;
|
|
}
|
|
}
|
|
if (tsa->encrypt)
|
|
itd->flags |= IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ipsec_rx - decode ipsec bits from Rx descriptor
|
|
* @rx_ring: receiving ring
|
|
* @rx_desc: receive data descriptor
|
|
* @skb: current data packet
|
|
*
|
|
* Determine if there was an ipsec encapsulation noticed, and if so set up
|
|
* the resulting status for later in the receive stack.
|
|
**/
|
|
void ixgbe_ipsec_rx(struct ixgbe_ring *rx_ring,
|
|
union ixgbe_adv_rx_desc *rx_desc,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ixgbe_adapter *adapter = netdev_priv(rx_ring->netdev);
|
|
__le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
|
|
__le16 ipsec_pkt_types = cpu_to_le16(IXGBE_RXDADV_PKTTYPE_IPSEC_AH |
|
|
IXGBE_RXDADV_PKTTYPE_IPSEC_ESP);
|
|
struct ixgbe_ipsec *ipsec = adapter->ipsec;
|
|
struct xfrm_offload *xo = NULL;
|
|
struct xfrm_state *xs = NULL;
|
|
struct ipv6hdr *ip6 = NULL;
|
|
struct iphdr *ip4 = NULL;
|
|
struct sec_path *sp;
|
|
void *daddr;
|
|
__be32 spi;
|
|
u8 *c_hdr;
|
|
u8 proto;
|
|
|
|
/* Find the ip and crypto headers in the data.
|
|
* We can assume no vlan header in the way, b/c the
|
|
* hw won't recognize the IPsec packet and anyway the
|
|
* currently vlan device doesn't support xfrm offload.
|
|
*/
|
|
if (pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_IPV4)) {
|
|
ip4 = (struct iphdr *)(skb->data + ETH_HLEN);
|
|
daddr = &ip4->daddr;
|
|
c_hdr = (u8 *)ip4 + ip4->ihl * 4;
|
|
} else if (pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_IPV6)) {
|
|
ip6 = (struct ipv6hdr *)(skb->data + ETH_HLEN);
|
|
daddr = &ip6->daddr;
|
|
c_hdr = (u8 *)ip6 + sizeof(struct ipv6hdr);
|
|
} else {
|
|
return;
|
|
}
|
|
|
|
switch (pkt_info & ipsec_pkt_types) {
|
|
case cpu_to_le16(IXGBE_RXDADV_PKTTYPE_IPSEC_AH):
|
|
spi = ((struct ip_auth_hdr *)c_hdr)->spi;
|
|
proto = IPPROTO_AH;
|
|
break;
|
|
case cpu_to_le16(IXGBE_RXDADV_PKTTYPE_IPSEC_ESP):
|
|
spi = ((struct ip_esp_hdr *)c_hdr)->spi;
|
|
proto = IPPROTO_ESP;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
xs = ixgbe_ipsec_find_rx_state(ipsec, daddr, proto, spi, !!ip4);
|
|
if (unlikely(!xs))
|
|
return;
|
|
|
|
sp = secpath_set(skb);
|
|
if (unlikely(!sp))
|
|
return;
|
|
|
|
sp->xvec[sp->len++] = xs;
|
|
sp->olen++;
|
|
xo = xfrm_offload(skb);
|
|
xo->flags = CRYPTO_DONE;
|
|
xo->status = CRYPTO_SUCCESS;
|
|
|
|
adapter->rx_ipsec++;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_init_ipsec_offload - initialize security registers for IPSec operation
|
|
* @adapter: board private structure
|
|
**/
|
|
void ixgbe_init_ipsec_offload(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ixgbe_ipsec *ipsec;
|
|
u32 t_dis, r_dis;
|
|
size_t size;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
return;
|
|
|
|
/* If there is no support for either Tx or Rx offload
|
|
* we should not be advertising support for IPsec.
|
|
*/
|
|
t_dis = IXGBE_READ_REG(hw, IXGBE_SECTXSTAT) &
|
|
IXGBE_SECTXSTAT_SECTX_OFF_DIS;
|
|
r_dis = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT) &
|
|
IXGBE_SECRXSTAT_SECRX_OFF_DIS;
|
|
if (t_dis || r_dis)
|
|
return;
|
|
|
|
ipsec = kzalloc(sizeof(*ipsec), GFP_KERNEL);
|
|
if (!ipsec)
|
|
goto err1;
|
|
hash_init(ipsec->rx_sa_list);
|
|
|
|
size = sizeof(struct rx_sa) * IXGBE_IPSEC_MAX_SA_COUNT;
|
|
ipsec->rx_tbl = kzalloc(size, GFP_KERNEL);
|
|
if (!ipsec->rx_tbl)
|
|
goto err2;
|
|
|
|
size = sizeof(struct tx_sa) * IXGBE_IPSEC_MAX_SA_COUNT;
|
|
ipsec->tx_tbl = kzalloc(size, GFP_KERNEL);
|
|
if (!ipsec->tx_tbl)
|
|
goto err2;
|
|
|
|
size = sizeof(struct rx_ip_sa) * IXGBE_IPSEC_MAX_RX_IP_COUNT;
|
|
ipsec->ip_tbl = kzalloc(size, GFP_KERNEL);
|
|
if (!ipsec->ip_tbl)
|
|
goto err2;
|
|
|
|
ipsec->num_rx_sa = 0;
|
|
ipsec->num_tx_sa = 0;
|
|
|
|
adapter->ipsec = ipsec;
|
|
ixgbe_ipsec_stop_engine(adapter);
|
|
ixgbe_ipsec_clear_hw_tables(adapter);
|
|
|
|
adapter->netdev->xfrmdev_ops = &ixgbe_xfrmdev_ops;
|
|
|
|
return;
|
|
|
|
err2:
|
|
kfree(ipsec->ip_tbl);
|
|
kfree(ipsec->rx_tbl);
|
|
kfree(ipsec->tx_tbl);
|
|
kfree(ipsec);
|
|
err1:
|
|
netdev_err(adapter->netdev, "Unable to allocate memory for SA tables");
|
|
}
|
|
|
|
/**
|
|
* ixgbe_stop_ipsec_offload - tear down the ipsec offload
|
|
* @adapter: board private structure
|
|
**/
|
|
void ixgbe_stop_ipsec_offload(struct ixgbe_adapter *adapter)
|
|
{
|
|
struct ixgbe_ipsec *ipsec = adapter->ipsec;
|
|
|
|
adapter->ipsec = NULL;
|
|
if (ipsec) {
|
|
kfree(ipsec->ip_tbl);
|
|
kfree(ipsec->rx_tbl);
|
|
kfree(ipsec->tx_tbl);
|
|
kfree(ipsec);
|
|
}
|
|
}
|