480 lines
11 KiB
C
480 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* SPI-NOR driver for NXP SPI Flash Interface (SPIFI)
|
|
*
|
|
* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
|
|
*
|
|
* Based on Freescale QuadSPI driver:
|
|
* Copyright (C) 2013 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/spi-nor.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
/* NXP SPIFI registers, bits and macros */
|
|
#define SPIFI_CTRL 0x000
|
|
#define SPIFI_CTRL_TIMEOUT(timeout) (timeout)
|
|
#define SPIFI_CTRL_CSHIGH(cshigh) ((cshigh) << 16)
|
|
#define SPIFI_CTRL_MODE3 BIT(23)
|
|
#define SPIFI_CTRL_DUAL BIT(28)
|
|
#define SPIFI_CTRL_FBCLK BIT(30)
|
|
#define SPIFI_CMD 0x004
|
|
#define SPIFI_CMD_DATALEN(dlen) ((dlen) & 0x3fff)
|
|
#define SPIFI_CMD_DOUT BIT(15)
|
|
#define SPIFI_CMD_INTLEN(ilen) ((ilen) << 16)
|
|
#define SPIFI_CMD_FIELDFORM(field) ((field) << 19)
|
|
#define SPIFI_CMD_FIELDFORM_ALL_SERIAL SPIFI_CMD_FIELDFORM(0x0)
|
|
#define SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA SPIFI_CMD_FIELDFORM(0x1)
|
|
#define SPIFI_CMD_FRAMEFORM(frame) ((frame) << 21)
|
|
#define SPIFI_CMD_FRAMEFORM_OPCODE_ONLY SPIFI_CMD_FRAMEFORM(0x1)
|
|
#define SPIFI_CMD_OPCODE(op) ((op) << 24)
|
|
#define SPIFI_ADDR 0x008
|
|
#define SPIFI_IDATA 0x00c
|
|
#define SPIFI_CLIMIT 0x010
|
|
#define SPIFI_DATA 0x014
|
|
#define SPIFI_MCMD 0x018
|
|
#define SPIFI_STAT 0x01c
|
|
#define SPIFI_STAT_MCINIT BIT(0)
|
|
#define SPIFI_STAT_CMD BIT(1)
|
|
#define SPIFI_STAT_RESET BIT(4)
|
|
|
|
#define SPI_NOR_MAX_ID_LEN 6
|
|
|
|
struct nxp_spifi {
|
|
struct device *dev;
|
|
struct clk *clk_spifi;
|
|
struct clk *clk_reg;
|
|
void __iomem *io_base;
|
|
void __iomem *flash_base;
|
|
struct spi_nor nor;
|
|
bool memory_mode;
|
|
u32 mcmd;
|
|
};
|
|
|
|
static int nxp_spifi_wait_for_cmd(struct nxp_spifi *spifi)
|
|
{
|
|
u8 stat;
|
|
int ret;
|
|
|
|
ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
|
|
!(stat & SPIFI_STAT_CMD), 10, 30);
|
|
if (ret)
|
|
dev_warn(spifi->dev, "command timed out\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int nxp_spifi_reset(struct nxp_spifi *spifi)
|
|
{
|
|
u8 stat;
|
|
int ret;
|
|
|
|
writel(SPIFI_STAT_RESET, spifi->io_base + SPIFI_STAT);
|
|
ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
|
|
!(stat & SPIFI_STAT_RESET), 10, 30);
|
|
if (ret)
|
|
dev_warn(spifi->dev, "state reset timed out\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int nxp_spifi_set_memory_mode_off(struct nxp_spifi *spifi)
|
|
{
|
|
int ret;
|
|
|
|
if (!spifi->memory_mode)
|
|
return 0;
|
|
|
|
ret = nxp_spifi_reset(spifi);
|
|
if (ret)
|
|
dev_err(spifi->dev, "unable to enter command mode\n");
|
|
else
|
|
spifi->memory_mode = false;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int nxp_spifi_set_memory_mode_on(struct nxp_spifi *spifi)
|
|
{
|
|
u8 stat;
|
|
int ret;
|
|
|
|
if (spifi->memory_mode)
|
|
return 0;
|
|
|
|
writel(spifi->mcmd, spifi->io_base + SPIFI_MCMD);
|
|
ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
|
|
stat & SPIFI_STAT_MCINIT, 10, 30);
|
|
if (ret)
|
|
dev_err(spifi->dev, "unable to enter memory mode\n");
|
|
else
|
|
spifi->memory_mode = true;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
|
|
{
|
|
struct nxp_spifi *spifi = nor->priv;
|
|
u32 cmd;
|
|
int ret;
|
|
|
|
ret = nxp_spifi_set_memory_mode_off(spifi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
cmd = SPIFI_CMD_DATALEN(len) |
|
|
SPIFI_CMD_OPCODE(opcode) |
|
|
SPIFI_CMD_FIELDFORM_ALL_SERIAL |
|
|
SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
|
|
writel(cmd, spifi->io_base + SPIFI_CMD);
|
|
|
|
while (len--)
|
|
*buf++ = readb(spifi->io_base + SPIFI_DATA);
|
|
|
|
return nxp_spifi_wait_for_cmd(spifi);
|
|
}
|
|
|
|
static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
|
|
{
|
|
struct nxp_spifi *spifi = nor->priv;
|
|
u32 cmd;
|
|
int ret;
|
|
|
|
ret = nxp_spifi_set_memory_mode_off(spifi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
cmd = SPIFI_CMD_DOUT |
|
|
SPIFI_CMD_DATALEN(len) |
|
|
SPIFI_CMD_OPCODE(opcode) |
|
|
SPIFI_CMD_FIELDFORM_ALL_SERIAL |
|
|
SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
|
|
writel(cmd, spifi->io_base + SPIFI_CMD);
|
|
|
|
while (len--)
|
|
writeb(*buf++, spifi->io_base + SPIFI_DATA);
|
|
|
|
return nxp_spifi_wait_for_cmd(spifi);
|
|
}
|
|
|
|
static ssize_t nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len,
|
|
u_char *buf)
|
|
{
|
|
struct nxp_spifi *spifi = nor->priv;
|
|
int ret;
|
|
|
|
ret = nxp_spifi_set_memory_mode_on(spifi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
memcpy_fromio(buf, spifi->flash_base + from, len);
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
|
|
const u_char *buf)
|
|
{
|
|
struct nxp_spifi *spifi = nor->priv;
|
|
u32 cmd;
|
|
int ret;
|
|
size_t i;
|
|
|
|
ret = nxp_spifi_set_memory_mode_off(spifi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(to, spifi->io_base + SPIFI_ADDR);
|
|
|
|
cmd = SPIFI_CMD_DOUT |
|
|
SPIFI_CMD_DATALEN(len) |
|
|
SPIFI_CMD_FIELDFORM_ALL_SERIAL |
|
|
SPIFI_CMD_OPCODE(nor->program_opcode) |
|
|
SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
|
|
writel(cmd, spifi->io_base + SPIFI_CMD);
|
|
|
|
for (i = 0; i < len; i++)
|
|
writeb(buf[i], spifi->io_base + SPIFI_DATA);
|
|
|
|
ret = nxp_spifi_wait_for_cmd(spifi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return len;
|
|
}
|
|
|
|
static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
|
|
{
|
|
struct nxp_spifi *spifi = nor->priv;
|
|
u32 cmd;
|
|
int ret;
|
|
|
|
ret = nxp_spifi_set_memory_mode_off(spifi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(offs, spifi->io_base + SPIFI_ADDR);
|
|
|
|
cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL |
|
|
SPIFI_CMD_OPCODE(nor->erase_opcode) |
|
|
SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
|
|
writel(cmd, spifi->io_base + SPIFI_CMD);
|
|
|
|
return nxp_spifi_wait_for_cmd(spifi);
|
|
}
|
|
|
|
static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
|
|
{
|
|
switch (spifi->nor.read_proto) {
|
|
case SNOR_PROTO_1_1_1:
|
|
spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL;
|
|
break;
|
|
case SNOR_PROTO_1_1_2:
|
|
case SNOR_PROTO_1_1_4:
|
|
spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA;
|
|
break;
|
|
default:
|
|
dev_err(spifi->dev, "unsupported SPI read mode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Memory mode supports address length between 1 and 4 */
|
|
if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4)
|
|
return -EINVAL;
|
|
|
|
spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) |
|
|
SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) |
|
|
SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nxp_spifi_dummy_id_read(struct spi_nor *nor)
|
|
{
|
|
u8 id[SPI_NOR_MAX_ID_LEN];
|
|
nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
|
|
}
|
|
|
|
static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
|
|
struct device_node *np)
|
|
{
|
|
struct spi_nor_hwcaps hwcaps = {
|
|
.mask = SNOR_HWCAPS_READ |
|
|
SNOR_HWCAPS_READ_FAST |
|
|
SNOR_HWCAPS_PP,
|
|
};
|
|
u32 ctrl, property;
|
|
u16 mode = 0;
|
|
int ret;
|
|
|
|
if (!of_property_read_u32(np, "spi-rx-bus-width", &property)) {
|
|
switch (property) {
|
|
case 1:
|
|
break;
|
|
case 2:
|
|
mode |= SPI_RX_DUAL;
|
|
break;
|
|
case 4:
|
|
mode |= SPI_RX_QUAD;
|
|
break;
|
|
default:
|
|
dev_err(spifi->dev, "unsupported rx-bus-width\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (of_find_property(np, "spi-cpha", NULL))
|
|
mode |= SPI_CPHA;
|
|
|
|
if (of_find_property(np, "spi-cpol", NULL))
|
|
mode |= SPI_CPOL;
|
|
|
|
/* Setup control register defaults */
|
|
ctrl = SPIFI_CTRL_TIMEOUT(1000) |
|
|
SPIFI_CTRL_CSHIGH(15) |
|
|
SPIFI_CTRL_FBCLK;
|
|
|
|
if (mode & SPI_RX_DUAL) {
|
|
ctrl |= SPIFI_CTRL_DUAL;
|
|
hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
|
|
} else if (mode & SPI_RX_QUAD) {
|
|
ctrl &= ~SPIFI_CTRL_DUAL;
|
|
hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
|
|
} else {
|
|
ctrl |= SPIFI_CTRL_DUAL;
|
|
}
|
|
|
|
switch (mode & (SPI_CPHA | SPI_CPOL)) {
|
|
case SPI_MODE_0:
|
|
ctrl &= ~SPIFI_CTRL_MODE3;
|
|
break;
|
|
case SPI_MODE_3:
|
|
ctrl |= SPIFI_CTRL_MODE3;
|
|
break;
|
|
default:
|
|
dev_err(spifi->dev, "only mode 0 and 3 supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel(ctrl, spifi->io_base + SPIFI_CTRL);
|
|
|
|
spifi->nor.dev = spifi->dev;
|
|
spi_nor_set_flash_node(&spifi->nor, np);
|
|
spifi->nor.priv = spifi;
|
|
spifi->nor.read = nxp_spifi_read;
|
|
spifi->nor.write = nxp_spifi_write;
|
|
spifi->nor.erase = nxp_spifi_erase;
|
|
spifi->nor.read_reg = nxp_spifi_read_reg;
|
|
spifi->nor.write_reg = nxp_spifi_write_reg;
|
|
|
|
/*
|
|
* The first read on a hard reset isn't reliable so do a
|
|
* dummy read of the id before calling spi_nor_scan().
|
|
* The reason for this problem is unknown.
|
|
*
|
|
* The official NXP spifilib uses more or less the same
|
|
* workaround that is applied here by reading the device
|
|
* id multiple times.
|
|
*/
|
|
nxp_spifi_dummy_id_read(&spifi->nor);
|
|
|
|
ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps);
|
|
if (ret) {
|
|
dev_err(spifi->dev, "device scan failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = nxp_spifi_setup_memory_cmd(spifi);
|
|
if (ret) {
|
|
dev_err(spifi->dev, "memory command setup failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = mtd_device_register(&spifi->nor.mtd, NULL, 0);
|
|
if (ret) {
|
|
dev_err(spifi->dev, "mtd device parse failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nxp_spifi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *flash_np;
|
|
struct nxp_spifi *spifi;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
spifi = devm_kzalloc(&pdev->dev, sizeof(*spifi), GFP_KERNEL);
|
|
if (!spifi)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spifi");
|
|
spifi->io_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(spifi->io_base))
|
|
return PTR_ERR(spifi->io_base);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash");
|
|
spifi->flash_base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(spifi->flash_base))
|
|
return PTR_ERR(spifi->flash_base);
|
|
|
|
spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi");
|
|
if (IS_ERR(spifi->clk_spifi)) {
|
|
dev_err(&pdev->dev, "spifi clock not found\n");
|
|
return PTR_ERR(spifi->clk_spifi);
|
|
}
|
|
|
|
spifi->clk_reg = devm_clk_get(&pdev->dev, "reg");
|
|
if (IS_ERR(spifi->clk_reg)) {
|
|
dev_err(&pdev->dev, "reg clock not found\n");
|
|
return PTR_ERR(spifi->clk_reg);
|
|
}
|
|
|
|
ret = clk_prepare_enable(spifi->clk_reg);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to enable reg clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(spifi->clk_spifi);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to enable spifi clock\n");
|
|
goto dis_clk_reg;
|
|
}
|
|
|
|
spifi->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, spifi);
|
|
|
|
/* Initialize and reset device */
|
|
nxp_spifi_reset(spifi);
|
|
writel(0, spifi->io_base + SPIFI_IDATA);
|
|
writel(0, spifi->io_base + SPIFI_MCMD);
|
|
nxp_spifi_reset(spifi);
|
|
|
|
flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
|
|
if (!flash_np) {
|
|
dev_err(&pdev->dev, "no SPI flash device to configure\n");
|
|
ret = -ENODEV;
|
|
goto dis_clks;
|
|
}
|
|
|
|
ret = nxp_spifi_setup_flash(spifi, flash_np);
|
|
of_node_put(flash_np);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to setup flash chip\n");
|
|
goto dis_clks;
|
|
}
|
|
|
|
return 0;
|
|
|
|
dis_clks:
|
|
clk_disable_unprepare(spifi->clk_spifi);
|
|
dis_clk_reg:
|
|
clk_disable_unprepare(spifi->clk_reg);
|
|
return ret;
|
|
}
|
|
|
|
static int nxp_spifi_remove(struct platform_device *pdev)
|
|
{
|
|
struct nxp_spifi *spifi = platform_get_drvdata(pdev);
|
|
|
|
mtd_device_unregister(&spifi->nor.mtd);
|
|
clk_disable_unprepare(spifi->clk_spifi);
|
|
clk_disable_unprepare(spifi->clk_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id nxp_spifi_match[] = {
|
|
{.compatible = "nxp,lpc1773-spifi"},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, nxp_spifi_match);
|
|
|
|
static struct platform_driver nxp_spifi_driver = {
|
|
.probe = nxp_spifi_probe,
|
|
.remove = nxp_spifi_remove,
|
|
.driver = {
|
|
.name = "nxp-spifi",
|
|
.of_match_table = nxp_spifi_match,
|
|
},
|
|
};
|
|
module_platform_driver(nxp_spifi_driver);
|
|
|
|
MODULE_DESCRIPTION("NXP SPI Flash Interface driver");
|
|
MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|