1553 lines
42 KiB
C
1553 lines
42 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* HackRF driver
|
|
*
|
|
* Copyright (C) 2014 Antti Palosaari <crope@iki.fi>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/videobuf2-v4l2.h>
|
|
#include <media/videobuf2-vmalloc.h>
|
|
|
|
/*
|
|
* Used Avago MGA-81563 RF amplifier could be destroyed pretty easily with too
|
|
* strong signal or transmitting to bad antenna.
|
|
* Set RF gain control to 'grabbed' state by default for sure.
|
|
*/
|
|
static bool hackrf_enable_rf_gain_ctrl;
|
|
module_param_named(enable_rf_gain_ctrl, hackrf_enable_rf_gain_ctrl, bool, 0644);
|
|
MODULE_PARM_DESC(enable_rf_gain_ctrl, "enable RX/TX RF amplifier control (warn: could damage amplifier)");
|
|
|
|
/* HackRF USB API commands (from HackRF Library) */
|
|
enum {
|
|
CMD_SET_TRANSCEIVER_MODE = 0x01,
|
|
CMD_SAMPLE_RATE_SET = 0x06,
|
|
CMD_BASEBAND_FILTER_BANDWIDTH_SET = 0x07,
|
|
CMD_BOARD_ID_READ = 0x0e,
|
|
CMD_VERSION_STRING_READ = 0x0f,
|
|
CMD_SET_FREQ = 0x10,
|
|
CMD_AMP_ENABLE = 0x11,
|
|
CMD_SET_LNA_GAIN = 0x13,
|
|
CMD_SET_VGA_GAIN = 0x14,
|
|
CMD_SET_TXVGA_GAIN = 0x15,
|
|
};
|
|
|
|
/*
|
|
* bEndpointAddress 0x81 EP 1 IN
|
|
* Transfer Type Bulk
|
|
* wMaxPacketSize 0x0200 1x 512 bytes
|
|
*/
|
|
#define MAX_BULK_BUFS (6)
|
|
#define BULK_BUFFER_SIZE (128 * 512)
|
|
|
|
static const struct v4l2_frequency_band bands_adc_dac[] = {
|
|
{
|
|
.tuner = 0,
|
|
.type = V4L2_TUNER_SDR,
|
|
.index = 0,
|
|
.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
|
|
.rangelow = 200000,
|
|
.rangehigh = 24000000,
|
|
},
|
|
};
|
|
|
|
static const struct v4l2_frequency_band bands_rx_tx[] = {
|
|
{
|
|
.tuner = 1,
|
|
.type = V4L2_TUNER_RF,
|
|
.index = 0,
|
|
.capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS,
|
|
.rangelow = 1,
|
|
.rangehigh = 4294967294LL, /* max u32, hw goes over 7GHz */
|
|
},
|
|
};
|
|
|
|
/* stream formats */
|
|
struct hackrf_format {
|
|
u32 pixelformat;
|
|
u32 buffersize;
|
|
};
|
|
|
|
/* format descriptions for capture and preview */
|
|
static struct hackrf_format formats[] = {
|
|
{
|
|
.pixelformat = V4L2_SDR_FMT_CS8,
|
|
.buffersize = BULK_BUFFER_SIZE,
|
|
},
|
|
};
|
|
|
|
static const unsigned int NUM_FORMATS = ARRAY_SIZE(formats);
|
|
|
|
/* intermediate buffers with raw data from the USB device */
|
|
struct hackrf_buffer {
|
|
struct vb2_v4l2_buffer vb;
|
|
struct list_head list;
|
|
};
|
|
|
|
struct hackrf_dev {
|
|
#define USB_STATE_URB_BUF 1 /* XXX: set manually */
|
|
#define RX_ON 4
|
|
#define TX_ON 5
|
|
#define RX_ADC_FREQUENCY 11
|
|
#define TX_DAC_FREQUENCY 12
|
|
#define RX_BANDWIDTH 13
|
|
#define TX_BANDWIDTH 14
|
|
#define RX_RF_FREQUENCY 15
|
|
#define TX_RF_FREQUENCY 16
|
|
#define RX_RF_GAIN 17
|
|
#define TX_RF_GAIN 18
|
|
#define RX_IF_GAIN 19
|
|
#define RX_LNA_GAIN 20
|
|
#define TX_LNA_GAIN 21
|
|
unsigned long flags;
|
|
|
|
struct usb_interface *intf;
|
|
struct device *dev;
|
|
struct usb_device *udev;
|
|
struct video_device rx_vdev;
|
|
struct video_device tx_vdev;
|
|
struct v4l2_device v4l2_dev;
|
|
|
|
/* videobuf2 queue and queued buffers list */
|
|
struct vb2_queue rx_vb2_queue;
|
|
struct vb2_queue tx_vb2_queue;
|
|
struct list_head rx_buffer_list;
|
|
struct list_head tx_buffer_list;
|
|
spinlock_t buffer_list_lock; /* Protects buffer_list */
|
|
unsigned int sequence; /* Buffer sequence counter */
|
|
unsigned int vb_full; /* vb is full and packets dropped */
|
|
unsigned int vb_empty; /* vb is empty and packets dropped */
|
|
|
|
/* Note if taking both locks v4l2_lock must always be locked first! */
|
|
struct mutex v4l2_lock; /* Protects everything else */
|
|
struct mutex vb_queue_lock; /* Protects vb_queue */
|
|
|
|
struct urb *urb_list[MAX_BULK_BUFS];
|
|
int buf_num;
|
|
unsigned long buf_size;
|
|
u8 *buf_list[MAX_BULK_BUFS];
|
|
dma_addr_t dma_addr[MAX_BULK_BUFS];
|
|
int urbs_initialized;
|
|
int urbs_submitted;
|
|
|
|
/* USB control message buffer */
|
|
#define BUF_SIZE 24
|
|
u8 buf[BUF_SIZE];
|
|
|
|
/* Current configuration */
|
|
unsigned int f_adc;
|
|
unsigned int f_dac;
|
|
unsigned int f_rx;
|
|
unsigned int f_tx;
|
|
u32 pixelformat;
|
|
u32 buffersize;
|
|
|
|
/* Controls */
|
|
struct v4l2_ctrl_handler rx_ctrl_handler;
|
|
struct v4l2_ctrl *rx_bandwidth_auto;
|
|
struct v4l2_ctrl *rx_bandwidth;
|
|
struct v4l2_ctrl *rx_rf_gain;
|
|
struct v4l2_ctrl *rx_lna_gain;
|
|
struct v4l2_ctrl *rx_if_gain;
|
|
struct v4l2_ctrl_handler tx_ctrl_handler;
|
|
struct v4l2_ctrl *tx_bandwidth_auto;
|
|
struct v4l2_ctrl *tx_bandwidth;
|
|
struct v4l2_ctrl *tx_rf_gain;
|
|
struct v4l2_ctrl *tx_lna_gain;
|
|
|
|
/* Sample rate calc */
|
|
unsigned long jiffies_next;
|
|
unsigned int sample;
|
|
unsigned int sample_measured;
|
|
};
|
|
|
|
#define hackrf_dbg_usb_control_msg(_dev, _r, _t, _v, _i, _b, _l) { \
|
|
char *_direction; \
|
|
if (_t & USB_DIR_IN) \
|
|
_direction = "<<<"; \
|
|
else \
|
|
_direction = ">>>"; \
|
|
dev_dbg(_dev, "%02x %02x %02x %02x %02x %02x %02x %02x %s %*ph\n", \
|
|
_t, _r, _v & 0xff, _v >> 8, _i & 0xff, \
|
|
_i >> 8, _l & 0xff, _l >> 8, _direction, _l, _b); \
|
|
}
|
|
|
|
/* execute firmware command */
|
|
static int hackrf_ctrl_msg(struct hackrf_dev *dev, u8 request, u16 value,
|
|
u16 index, u8 *data, u16 size)
|
|
{
|
|
int ret;
|
|
unsigned int pipe;
|
|
u8 requesttype;
|
|
|
|
switch (request) {
|
|
case CMD_SET_TRANSCEIVER_MODE:
|
|
case CMD_SET_FREQ:
|
|
case CMD_AMP_ENABLE:
|
|
case CMD_SAMPLE_RATE_SET:
|
|
case CMD_BASEBAND_FILTER_BANDWIDTH_SET:
|
|
pipe = usb_sndctrlpipe(dev->udev, 0);
|
|
requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
|
|
break;
|
|
case CMD_BOARD_ID_READ:
|
|
case CMD_VERSION_STRING_READ:
|
|
case CMD_SET_LNA_GAIN:
|
|
case CMD_SET_VGA_GAIN:
|
|
case CMD_SET_TXVGA_GAIN:
|
|
pipe = usb_rcvctrlpipe(dev->udev, 0);
|
|
requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
|
|
break;
|
|
default:
|
|
dev_err(dev->dev, "Unknown command %02x\n", request);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
/* write request */
|
|
if (!(requesttype & USB_DIR_IN))
|
|
memcpy(dev->buf, data, size);
|
|
|
|
ret = usb_control_msg(dev->udev, pipe, request, requesttype, value,
|
|
index, dev->buf, size, 1000);
|
|
hackrf_dbg_usb_control_msg(dev->dev, request, requesttype, value,
|
|
index, dev->buf, size);
|
|
if (ret < 0) {
|
|
dev_err(dev->dev, "usb_control_msg() failed %d request %02x\n",
|
|
ret, request);
|
|
goto err;
|
|
}
|
|
|
|
/* read request */
|
|
if (requesttype & USB_DIR_IN)
|
|
memcpy(data, dev->buf, size);
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int hackrf_set_params(struct hackrf_dev *dev)
|
|
{
|
|
struct usb_interface *intf = dev->intf;
|
|
int ret, i;
|
|
u8 buf[8], u8tmp;
|
|
unsigned int uitmp, uitmp1, uitmp2;
|
|
const bool rx = test_bit(RX_ON, &dev->flags);
|
|
const bool tx = test_bit(TX_ON, &dev->flags);
|
|
static const struct {
|
|
u32 freq;
|
|
} bandwidth_lut[] = {
|
|
{ 1750000}, /* 1.75 MHz */
|
|
{ 2500000}, /* 2.5 MHz */
|
|
{ 3500000}, /* 3.5 MHz */
|
|
{ 5000000}, /* 5 MHz */
|
|
{ 5500000}, /* 5.5 MHz */
|
|
{ 6000000}, /* 6 MHz */
|
|
{ 7000000}, /* 7 MHz */
|
|
{ 8000000}, /* 8 MHz */
|
|
{ 9000000}, /* 9 MHz */
|
|
{10000000}, /* 10 MHz */
|
|
{12000000}, /* 12 MHz */
|
|
{14000000}, /* 14 MHz */
|
|
{15000000}, /* 15 MHz */
|
|
{20000000}, /* 20 MHz */
|
|
{24000000}, /* 24 MHz */
|
|
{28000000}, /* 28 MHz */
|
|
};
|
|
|
|
if (!rx && !tx) {
|
|
dev_dbg(&intf->dev, "device is sleeping\n");
|
|
return 0;
|
|
}
|
|
|
|
/* ADC / DAC frequency */
|
|
if (rx && test_and_clear_bit(RX_ADC_FREQUENCY, &dev->flags)) {
|
|
dev_dbg(&intf->dev, "RX ADC frequency=%u Hz\n", dev->f_adc);
|
|
uitmp1 = dev->f_adc;
|
|
uitmp2 = 1;
|
|
set_bit(TX_DAC_FREQUENCY, &dev->flags);
|
|
} else if (tx && test_and_clear_bit(TX_DAC_FREQUENCY, &dev->flags)) {
|
|
dev_dbg(&intf->dev, "TX DAC frequency=%u Hz\n", dev->f_dac);
|
|
uitmp1 = dev->f_dac;
|
|
uitmp2 = 1;
|
|
set_bit(RX_ADC_FREQUENCY, &dev->flags);
|
|
} else {
|
|
uitmp1 = uitmp2 = 0;
|
|
}
|
|
if (uitmp1 || uitmp2) {
|
|
buf[0] = (uitmp1 >> 0) & 0xff;
|
|
buf[1] = (uitmp1 >> 8) & 0xff;
|
|
buf[2] = (uitmp1 >> 16) & 0xff;
|
|
buf[3] = (uitmp1 >> 24) & 0xff;
|
|
buf[4] = (uitmp2 >> 0) & 0xff;
|
|
buf[5] = (uitmp2 >> 8) & 0xff;
|
|
buf[6] = (uitmp2 >> 16) & 0xff;
|
|
buf[7] = (uitmp2 >> 24) & 0xff;
|
|
ret = hackrf_ctrl_msg(dev, CMD_SAMPLE_RATE_SET, 0, 0, buf, 8);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* bandwidth */
|
|
if (rx && test_and_clear_bit(RX_BANDWIDTH, &dev->flags)) {
|
|
if (dev->rx_bandwidth_auto->val == true)
|
|
uitmp = dev->f_adc;
|
|
else
|
|
uitmp = dev->rx_bandwidth->val;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bandwidth_lut); i++) {
|
|
if (uitmp <= bandwidth_lut[i].freq) {
|
|
uitmp = bandwidth_lut[i].freq;
|
|
break;
|
|
}
|
|
}
|
|
dev->rx_bandwidth->val = uitmp;
|
|
dev->rx_bandwidth->cur.val = uitmp;
|
|
dev_dbg(&intf->dev, "RX bandwidth selected=%u\n", uitmp);
|
|
set_bit(TX_BANDWIDTH, &dev->flags);
|
|
} else if (tx && test_and_clear_bit(TX_BANDWIDTH, &dev->flags)) {
|
|
if (dev->tx_bandwidth_auto->val == true)
|
|
uitmp = dev->f_dac;
|
|
else
|
|
uitmp = dev->tx_bandwidth->val;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bandwidth_lut); i++) {
|
|
if (uitmp <= bandwidth_lut[i].freq) {
|
|
uitmp = bandwidth_lut[i].freq;
|
|
break;
|
|
}
|
|
}
|
|
dev->tx_bandwidth->val = uitmp;
|
|
dev->tx_bandwidth->cur.val = uitmp;
|
|
dev_dbg(&intf->dev, "TX bandwidth selected=%u\n", uitmp);
|
|
set_bit(RX_BANDWIDTH, &dev->flags);
|
|
} else {
|
|
uitmp = 0;
|
|
}
|
|
if (uitmp) {
|
|
uitmp1 = uitmp2 = 0;
|
|
uitmp1 |= ((uitmp >> 0) & 0xff) << 0;
|
|
uitmp1 |= ((uitmp >> 8) & 0xff) << 8;
|
|
uitmp2 |= ((uitmp >> 16) & 0xff) << 0;
|
|
uitmp2 |= ((uitmp >> 24) & 0xff) << 8;
|
|
ret = hackrf_ctrl_msg(dev, CMD_BASEBAND_FILTER_BANDWIDTH_SET,
|
|
uitmp1, uitmp2, NULL, 0);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* RX / TX RF frequency */
|
|
if (rx && test_and_clear_bit(RX_RF_FREQUENCY, &dev->flags)) {
|
|
dev_dbg(&intf->dev, "RX RF frequency=%u Hz\n", dev->f_rx);
|
|
uitmp1 = dev->f_rx / 1000000;
|
|
uitmp2 = dev->f_rx % 1000000;
|
|
set_bit(TX_RF_FREQUENCY, &dev->flags);
|
|
} else if (tx && test_and_clear_bit(TX_RF_FREQUENCY, &dev->flags)) {
|
|
dev_dbg(&intf->dev, "TX RF frequency=%u Hz\n", dev->f_tx);
|
|
uitmp1 = dev->f_tx / 1000000;
|
|
uitmp2 = dev->f_tx % 1000000;
|
|
set_bit(RX_RF_FREQUENCY, &dev->flags);
|
|
} else {
|
|
uitmp1 = uitmp2 = 0;
|
|
}
|
|
if (uitmp1 || uitmp2) {
|
|
buf[0] = (uitmp1 >> 0) & 0xff;
|
|
buf[1] = (uitmp1 >> 8) & 0xff;
|
|
buf[2] = (uitmp1 >> 16) & 0xff;
|
|
buf[3] = (uitmp1 >> 24) & 0xff;
|
|
buf[4] = (uitmp2 >> 0) & 0xff;
|
|
buf[5] = (uitmp2 >> 8) & 0xff;
|
|
buf[6] = (uitmp2 >> 16) & 0xff;
|
|
buf[7] = (uitmp2 >> 24) & 0xff;
|
|
ret = hackrf_ctrl_msg(dev, CMD_SET_FREQ, 0, 0, buf, 8);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* RX RF gain */
|
|
if (rx && test_and_clear_bit(RX_RF_GAIN, &dev->flags)) {
|
|
dev_dbg(&intf->dev, "RX RF gain val=%d->%d\n",
|
|
dev->rx_rf_gain->cur.val, dev->rx_rf_gain->val);
|
|
|
|
u8tmp = (dev->rx_rf_gain->val) ? 1 : 0;
|
|
ret = hackrf_ctrl_msg(dev, CMD_AMP_ENABLE, u8tmp, 0, NULL, 0);
|
|
if (ret)
|
|
goto err;
|
|
set_bit(TX_RF_GAIN, &dev->flags);
|
|
}
|
|
|
|
/* TX RF gain */
|
|
if (tx && test_and_clear_bit(TX_RF_GAIN, &dev->flags)) {
|
|
dev_dbg(&intf->dev, "TX RF gain val=%d->%d\n",
|
|
dev->tx_rf_gain->cur.val, dev->tx_rf_gain->val);
|
|
|
|
u8tmp = (dev->tx_rf_gain->val) ? 1 : 0;
|
|
ret = hackrf_ctrl_msg(dev, CMD_AMP_ENABLE, u8tmp, 0, NULL, 0);
|
|
if (ret)
|
|
goto err;
|
|
set_bit(RX_RF_GAIN, &dev->flags);
|
|
}
|
|
|
|
/* RX LNA gain */
|
|
if (rx && test_and_clear_bit(RX_LNA_GAIN, &dev->flags)) {
|
|
dev_dbg(dev->dev, "RX LNA gain val=%d->%d\n",
|
|
dev->rx_lna_gain->cur.val, dev->rx_lna_gain->val);
|
|
|
|
ret = hackrf_ctrl_msg(dev, CMD_SET_LNA_GAIN, 0,
|
|
dev->rx_lna_gain->val, &u8tmp, 1);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* RX IF gain */
|
|
if (rx && test_and_clear_bit(RX_IF_GAIN, &dev->flags)) {
|
|
dev_dbg(&intf->dev, "IF gain val=%d->%d\n",
|
|
dev->rx_if_gain->cur.val, dev->rx_if_gain->val);
|
|
|
|
ret = hackrf_ctrl_msg(dev, CMD_SET_VGA_GAIN, 0,
|
|
dev->rx_if_gain->val, &u8tmp, 1);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* TX LNA gain */
|
|
if (tx && test_and_clear_bit(TX_LNA_GAIN, &dev->flags)) {
|
|
dev_dbg(&intf->dev, "TX LNA gain val=%d->%d\n",
|
|
dev->tx_lna_gain->cur.val, dev->tx_lna_gain->val);
|
|
|
|
ret = hackrf_ctrl_msg(dev, CMD_SET_TXVGA_GAIN, 0,
|
|
dev->tx_lna_gain->val, &u8tmp, 1);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&intf->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Private functions */
|
|
static struct hackrf_buffer *hackrf_get_next_buffer(struct hackrf_dev *dev,
|
|
struct list_head *buffer_list)
|
|
{
|
|
unsigned long flags;
|
|
struct hackrf_buffer *buffer = NULL;
|
|
|
|
spin_lock_irqsave(&dev->buffer_list_lock, flags);
|
|
if (list_empty(buffer_list))
|
|
goto leave;
|
|
|
|
buffer = list_entry(buffer_list->next, struct hackrf_buffer, list);
|
|
list_del(&buffer->list);
|
|
leave:
|
|
spin_unlock_irqrestore(&dev->buffer_list_lock, flags);
|
|
return buffer;
|
|
}
|
|
|
|
static void hackrf_copy_stream(struct hackrf_dev *dev, void *dst, void *src,
|
|
unsigned int src_len)
|
|
{
|
|
memcpy(dst, src, src_len);
|
|
|
|
/* calculate sample rate and output it in 10 seconds intervals */
|
|
if (unlikely(time_is_before_jiffies(dev->jiffies_next))) {
|
|
#define MSECS 10000UL
|
|
unsigned int msecs = jiffies_to_msecs(jiffies -
|
|
dev->jiffies_next + msecs_to_jiffies(MSECS));
|
|
unsigned int samples = dev->sample - dev->sample_measured;
|
|
|
|
dev->jiffies_next = jiffies + msecs_to_jiffies(MSECS);
|
|
dev->sample_measured = dev->sample;
|
|
dev_dbg(dev->dev, "slen=%u samples=%u msecs=%u sample rate=%lu\n",
|
|
src_len, samples, msecs,
|
|
samples * 1000UL / msecs);
|
|
}
|
|
|
|
/* total number of samples */
|
|
dev->sample += src_len / 2;
|
|
}
|
|
|
|
/*
|
|
* This gets called for the bulk stream pipe. This is done in interrupt
|
|
* time, so it has to be fast, not crash, and not stall. Neat.
|
|
*/
|
|
static void hackrf_urb_complete_in(struct urb *urb)
|
|
{
|
|
struct hackrf_dev *dev = urb->context;
|
|
struct usb_interface *intf = dev->intf;
|
|
struct hackrf_buffer *buffer;
|
|
unsigned int len;
|
|
|
|
dev_dbg_ratelimited(&intf->dev, "status=%d length=%u/%u\n", urb->status,
|
|
urb->actual_length, urb->transfer_buffer_length);
|
|
|
|
switch (urb->status) {
|
|
case 0: /* success */
|
|
case -ETIMEDOUT: /* NAK */
|
|
break;
|
|
case -ECONNRESET: /* kill */
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
return;
|
|
default: /* error */
|
|
dev_err_ratelimited(&intf->dev, "URB failed %d\n", urb->status);
|
|
goto exit_usb_submit_urb;
|
|
}
|
|
|
|
/* get buffer to write */
|
|
buffer = hackrf_get_next_buffer(dev, &dev->rx_buffer_list);
|
|
if (unlikely(buffer == NULL)) {
|
|
dev->vb_full++;
|
|
dev_notice_ratelimited(&intf->dev,
|
|
"buffer is full - %u packets dropped\n",
|
|
dev->vb_full);
|
|
goto exit_usb_submit_urb;
|
|
}
|
|
|
|
len = min_t(unsigned long, vb2_plane_size(&buffer->vb.vb2_buf, 0),
|
|
urb->actual_length);
|
|
hackrf_copy_stream(dev, vb2_plane_vaddr(&buffer->vb.vb2_buf, 0),
|
|
urb->transfer_buffer, len);
|
|
vb2_set_plane_payload(&buffer->vb.vb2_buf, 0, len);
|
|
buffer->vb.sequence = dev->sequence++;
|
|
buffer->vb.vb2_buf.timestamp = ktime_get_ns();
|
|
vb2_buffer_done(&buffer->vb.vb2_buf, VB2_BUF_STATE_DONE);
|
|
exit_usb_submit_urb:
|
|
usb_submit_urb(urb, GFP_ATOMIC);
|
|
}
|
|
|
|
static void hackrf_urb_complete_out(struct urb *urb)
|
|
{
|
|
struct hackrf_dev *dev = urb->context;
|
|
struct usb_interface *intf = dev->intf;
|
|
struct hackrf_buffer *buffer;
|
|
unsigned int len;
|
|
|
|
dev_dbg_ratelimited(&intf->dev, "status=%d length=%u/%u\n", urb->status,
|
|
urb->actual_length, urb->transfer_buffer_length);
|
|
|
|
switch (urb->status) {
|
|
case 0: /* success */
|
|
case -ETIMEDOUT: /* NAK */
|
|
break;
|
|
case -ECONNRESET: /* kill */
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
return;
|
|
default: /* error */
|
|
dev_err_ratelimited(&intf->dev, "URB failed %d\n", urb->status);
|
|
}
|
|
|
|
/* get buffer to read */
|
|
buffer = hackrf_get_next_buffer(dev, &dev->tx_buffer_list);
|
|
if (unlikely(buffer == NULL)) {
|
|
dev->vb_empty++;
|
|
dev_notice_ratelimited(&intf->dev,
|
|
"buffer is empty - %u packets dropped\n",
|
|
dev->vb_empty);
|
|
urb->actual_length = 0;
|
|
goto exit_usb_submit_urb;
|
|
}
|
|
|
|
len = min_t(unsigned long, urb->transfer_buffer_length,
|
|
vb2_get_plane_payload(&buffer->vb.vb2_buf, 0));
|
|
hackrf_copy_stream(dev, urb->transfer_buffer,
|
|
vb2_plane_vaddr(&buffer->vb.vb2_buf, 0), len);
|
|
urb->actual_length = len;
|
|
buffer->vb.sequence = dev->sequence++;
|
|
buffer->vb.vb2_buf.timestamp = ktime_get_ns();
|
|
vb2_buffer_done(&buffer->vb.vb2_buf, VB2_BUF_STATE_DONE);
|
|
exit_usb_submit_urb:
|
|
usb_submit_urb(urb, GFP_ATOMIC);
|
|
}
|
|
|
|
static int hackrf_kill_urbs(struct hackrf_dev *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = dev->urbs_submitted - 1; i >= 0; i--) {
|
|
dev_dbg(dev->dev, "kill urb=%d\n", i);
|
|
/* stop the URB */
|
|
usb_kill_urb(dev->urb_list[i]);
|
|
}
|
|
dev->urbs_submitted = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hackrf_submit_urbs(struct hackrf_dev *dev)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < dev->urbs_initialized; i++) {
|
|
dev_dbg(dev->dev, "submit urb=%d\n", i);
|
|
ret = usb_submit_urb(dev->urb_list[i], GFP_KERNEL);
|
|
if (ret) {
|
|
dev_err(dev->dev, "Could not submit URB no. %d - get them all back\n",
|
|
i);
|
|
hackrf_kill_urbs(dev);
|
|
return ret;
|
|
}
|
|
dev->urbs_submitted++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hackrf_free_stream_bufs(struct hackrf_dev *dev)
|
|
{
|
|
if (dev->flags & USB_STATE_URB_BUF) {
|
|
while (dev->buf_num) {
|
|
dev->buf_num--;
|
|
dev_dbg(dev->dev, "free buf=%d\n", dev->buf_num);
|
|
usb_free_coherent(dev->udev, dev->buf_size,
|
|
dev->buf_list[dev->buf_num],
|
|
dev->dma_addr[dev->buf_num]);
|
|
}
|
|
}
|
|
dev->flags &= ~USB_STATE_URB_BUF;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hackrf_alloc_stream_bufs(struct hackrf_dev *dev)
|
|
{
|
|
dev->buf_num = 0;
|
|
dev->buf_size = BULK_BUFFER_SIZE;
|
|
|
|
dev_dbg(dev->dev, "all in all I will use %u bytes for streaming\n",
|
|
MAX_BULK_BUFS * BULK_BUFFER_SIZE);
|
|
|
|
for (dev->buf_num = 0; dev->buf_num < MAX_BULK_BUFS; dev->buf_num++) {
|
|
dev->buf_list[dev->buf_num] = usb_alloc_coherent(dev->udev,
|
|
BULK_BUFFER_SIZE, GFP_KERNEL,
|
|
&dev->dma_addr[dev->buf_num]);
|
|
if (!dev->buf_list[dev->buf_num]) {
|
|
dev_dbg(dev->dev, "alloc buf=%d failed\n",
|
|
dev->buf_num);
|
|
hackrf_free_stream_bufs(dev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev_dbg(dev->dev, "alloc buf=%d %p (dma %llu)\n", dev->buf_num,
|
|
dev->buf_list[dev->buf_num],
|
|
(long long)dev->dma_addr[dev->buf_num]);
|
|
dev->flags |= USB_STATE_URB_BUF;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hackrf_free_urbs(struct hackrf_dev *dev)
|
|
{
|
|
int i;
|
|
|
|
hackrf_kill_urbs(dev);
|
|
|
|
for (i = dev->urbs_initialized - 1; i >= 0; i--) {
|
|
if (dev->urb_list[i]) {
|
|
dev_dbg(dev->dev, "free urb=%d\n", i);
|
|
/* free the URBs */
|
|
usb_free_urb(dev->urb_list[i]);
|
|
}
|
|
}
|
|
dev->urbs_initialized = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hackrf_alloc_urbs(struct hackrf_dev *dev, bool rcv)
|
|
{
|
|
int i, j;
|
|
unsigned int pipe;
|
|
usb_complete_t complete;
|
|
|
|
if (rcv) {
|
|
pipe = usb_rcvbulkpipe(dev->udev, 0x81);
|
|
complete = &hackrf_urb_complete_in;
|
|
} else {
|
|
pipe = usb_sndbulkpipe(dev->udev, 0x02);
|
|
complete = &hackrf_urb_complete_out;
|
|
}
|
|
|
|
/* allocate the URBs */
|
|
for (i = 0; i < MAX_BULK_BUFS; i++) {
|
|
dev_dbg(dev->dev, "alloc urb=%d\n", i);
|
|
dev->urb_list[i] = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!dev->urb_list[i]) {
|
|
for (j = 0; j < i; j++)
|
|
usb_free_urb(dev->urb_list[j]);
|
|
return -ENOMEM;
|
|
}
|
|
usb_fill_bulk_urb(dev->urb_list[i],
|
|
dev->udev,
|
|
pipe,
|
|
dev->buf_list[i],
|
|
BULK_BUFFER_SIZE,
|
|
complete, dev);
|
|
|
|
dev->urb_list[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
|
|
dev->urb_list[i]->transfer_dma = dev->dma_addr[i];
|
|
dev->urbs_initialized++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* The user yanked out the cable... */
|
|
static void hackrf_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct v4l2_device *v = usb_get_intfdata(intf);
|
|
struct hackrf_dev *dev = container_of(v, struct hackrf_dev, v4l2_dev);
|
|
|
|
dev_dbg(dev->dev, "\n");
|
|
|
|
mutex_lock(&dev->vb_queue_lock);
|
|
mutex_lock(&dev->v4l2_lock);
|
|
/* No need to keep the urbs around after disconnection */
|
|
dev->udev = NULL;
|
|
v4l2_device_disconnect(&dev->v4l2_dev);
|
|
video_unregister_device(&dev->tx_vdev);
|
|
video_unregister_device(&dev->rx_vdev);
|
|
mutex_unlock(&dev->v4l2_lock);
|
|
mutex_unlock(&dev->vb_queue_lock);
|
|
|
|
v4l2_device_put(&dev->v4l2_dev);
|
|
}
|
|
|
|
/* Videobuf2 operations */
|
|
static void hackrf_return_all_buffers(struct vb2_queue *vq,
|
|
enum vb2_buffer_state state)
|
|
{
|
|
struct hackrf_dev *dev = vb2_get_drv_priv(vq);
|
|
struct usb_interface *intf = dev->intf;
|
|
struct hackrf_buffer *buffer, *node;
|
|
struct list_head *buffer_list;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(&intf->dev, "\n");
|
|
|
|
if (vq->type == V4L2_BUF_TYPE_SDR_CAPTURE)
|
|
buffer_list = &dev->rx_buffer_list;
|
|
else
|
|
buffer_list = &dev->tx_buffer_list;
|
|
|
|
spin_lock_irqsave(&dev->buffer_list_lock, flags);
|
|
list_for_each_entry_safe(buffer, node, buffer_list, list) {
|
|
dev_dbg(&intf->dev, "list_for_each_entry_safe\n");
|
|
vb2_buffer_done(&buffer->vb.vb2_buf, state);
|
|
list_del(&buffer->list);
|
|
}
|
|
spin_unlock_irqrestore(&dev->buffer_list_lock, flags);
|
|
}
|
|
|
|
static int hackrf_queue_setup(struct vb2_queue *vq,
|
|
unsigned int *nbuffers,
|
|
unsigned int *nplanes, unsigned int sizes[], struct device *alloc_devs[])
|
|
{
|
|
struct hackrf_dev *dev = vb2_get_drv_priv(vq);
|
|
|
|
dev_dbg(dev->dev, "nbuffers=%d\n", *nbuffers);
|
|
|
|
/* Need at least 8 buffers */
|
|
if (vq->num_buffers + *nbuffers < 8)
|
|
*nbuffers = 8 - vq->num_buffers;
|
|
*nplanes = 1;
|
|
sizes[0] = PAGE_ALIGN(dev->buffersize);
|
|
|
|
dev_dbg(dev->dev, "nbuffers=%d sizes[0]=%d\n", *nbuffers, sizes[0]);
|
|
return 0;
|
|
}
|
|
|
|
static void hackrf_buf_queue(struct vb2_buffer *vb)
|
|
{
|
|
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
|
|
struct vb2_queue *vq = vb->vb2_queue;
|
|
struct hackrf_dev *dev = vb2_get_drv_priv(vq);
|
|
struct hackrf_buffer *buffer = container_of(vbuf, struct hackrf_buffer, vb);
|
|
struct list_head *buffer_list;
|
|
unsigned long flags;
|
|
|
|
dev_dbg_ratelimited(&dev->intf->dev, "\n");
|
|
|
|
if (vq->type == V4L2_BUF_TYPE_SDR_CAPTURE)
|
|
buffer_list = &dev->rx_buffer_list;
|
|
else
|
|
buffer_list = &dev->tx_buffer_list;
|
|
|
|
spin_lock_irqsave(&dev->buffer_list_lock, flags);
|
|
list_add_tail(&buffer->list, buffer_list);
|
|
spin_unlock_irqrestore(&dev->buffer_list_lock, flags);
|
|
}
|
|
|
|
static int hackrf_start_streaming(struct vb2_queue *vq, unsigned int count)
|
|
{
|
|
struct hackrf_dev *dev = vb2_get_drv_priv(vq);
|
|
struct usb_interface *intf = dev->intf;
|
|
int ret;
|
|
unsigned int mode;
|
|
|
|
dev_dbg(&intf->dev, "count=%i\n", count);
|
|
|
|
mutex_lock(&dev->v4l2_lock);
|
|
|
|
/* Allow only RX or TX, not both same time */
|
|
if (vq->type == V4L2_BUF_TYPE_SDR_CAPTURE) {
|
|
if (test_bit(TX_ON, &dev->flags)) {
|
|
ret = -EBUSY;
|
|
goto err_hackrf_return_all_buffers;
|
|
}
|
|
|
|
mode = 1;
|
|
set_bit(RX_ON, &dev->flags);
|
|
} else {
|
|
if (test_bit(RX_ON, &dev->flags)) {
|
|
ret = -EBUSY;
|
|
goto err_hackrf_return_all_buffers;
|
|
}
|
|
|
|
mode = 2;
|
|
set_bit(TX_ON, &dev->flags);
|
|
}
|
|
|
|
dev->sequence = 0;
|
|
|
|
ret = hackrf_alloc_stream_bufs(dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = hackrf_alloc_urbs(dev, (mode == 1));
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = hackrf_submit_urbs(dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = hackrf_set_params(dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* start hardware streaming */
|
|
ret = hackrf_ctrl_msg(dev, CMD_SET_TRANSCEIVER_MODE, mode, 0, NULL, 0);
|
|
if (ret)
|
|
goto err;
|
|
|
|
mutex_unlock(&dev->v4l2_lock);
|
|
|
|
return 0;
|
|
err:
|
|
hackrf_kill_urbs(dev);
|
|
hackrf_free_urbs(dev);
|
|
hackrf_free_stream_bufs(dev);
|
|
clear_bit(RX_ON, &dev->flags);
|
|
clear_bit(TX_ON, &dev->flags);
|
|
err_hackrf_return_all_buffers:
|
|
hackrf_return_all_buffers(vq, VB2_BUF_STATE_QUEUED);
|
|
mutex_unlock(&dev->v4l2_lock);
|
|
dev_dbg(&intf->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static void hackrf_stop_streaming(struct vb2_queue *vq)
|
|
{
|
|
struct hackrf_dev *dev = vb2_get_drv_priv(vq);
|
|
struct usb_interface *intf = dev->intf;
|
|
|
|
dev_dbg(&intf->dev, "\n");
|
|
|
|
mutex_lock(&dev->v4l2_lock);
|
|
|
|
/* stop hardware streaming */
|
|
hackrf_ctrl_msg(dev, CMD_SET_TRANSCEIVER_MODE, 0, 0, NULL, 0);
|
|
|
|
hackrf_kill_urbs(dev);
|
|
hackrf_free_urbs(dev);
|
|
hackrf_free_stream_bufs(dev);
|
|
|
|
hackrf_return_all_buffers(vq, VB2_BUF_STATE_ERROR);
|
|
|
|
if (vq->type == V4L2_BUF_TYPE_SDR_CAPTURE)
|
|
clear_bit(RX_ON, &dev->flags);
|
|
else
|
|
clear_bit(TX_ON, &dev->flags);
|
|
|
|
mutex_unlock(&dev->v4l2_lock);
|
|
}
|
|
|
|
static const struct vb2_ops hackrf_vb2_ops = {
|
|
.queue_setup = hackrf_queue_setup,
|
|
.buf_queue = hackrf_buf_queue,
|
|
.start_streaming = hackrf_start_streaming,
|
|
.stop_streaming = hackrf_stop_streaming,
|
|
.wait_prepare = vb2_ops_wait_prepare,
|
|
.wait_finish = vb2_ops_wait_finish,
|
|
};
|
|
|
|
static int hackrf_querycap(struct file *file, void *fh,
|
|
struct v4l2_capability *cap)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
struct usb_interface *intf = dev->intf;
|
|
|
|
dev_dbg(&intf->dev, "\n");
|
|
|
|
cap->capabilities = V4L2_CAP_SDR_CAPTURE | V4L2_CAP_TUNER |
|
|
V4L2_CAP_SDR_OUTPUT | V4L2_CAP_MODULATOR |
|
|
V4L2_CAP_STREAMING | V4L2_CAP_READWRITE |
|
|
V4L2_CAP_DEVICE_CAPS;
|
|
strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
|
|
strscpy(cap->card, dev->rx_vdev.name, sizeof(cap->card));
|
|
usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hackrf_s_fmt_sdr(struct file *file, void *priv,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
struct video_device *vdev = video_devdata(file);
|
|
struct vb2_queue *q;
|
|
int i;
|
|
|
|
dev_dbg(dev->dev, "pixelformat fourcc %4.4s\n",
|
|
(char *)&f->fmt.sdr.pixelformat);
|
|
|
|
if (vdev->vfl_dir == VFL_DIR_RX)
|
|
q = &dev->rx_vb2_queue;
|
|
else
|
|
q = &dev->tx_vb2_queue;
|
|
|
|
if (vb2_is_busy(q))
|
|
return -EBUSY;
|
|
|
|
memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
|
|
for (i = 0; i < NUM_FORMATS; i++) {
|
|
if (f->fmt.sdr.pixelformat == formats[i].pixelformat) {
|
|
dev->pixelformat = formats[i].pixelformat;
|
|
dev->buffersize = formats[i].buffersize;
|
|
f->fmt.sdr.buffersize = formats[i].buffersize;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
dev->pixelformat = formats[0].pixelformat;
|
|
dev->buffersize = formats[0].buffersize;
|
|
f->fmt.sdr.pixelformat = formats[0].pixelformat;
|
|
f->fmt.sdr.buffersize = formats[0].buffersize;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hackrf_g_fmt_sdr(struct file *file, void *priv,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
|
|
dev_dbg(dev->dev, "pixelformat fourcc %4.4s\n",
|
|
(char *)&dev->pixelformat);
|
|
|
|
memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
|
|
f->fmt.sdr.pixelformat = dev->pixelformat;
|
|
f->fmt.sdr.buffersize = dev->buffersize;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hackrf_try_fmt_sdr(struct file *file, void *priv,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
int i;
|
|
|
|
dev_dbg(dev->dev, "pixelformat fourcc %4.4s\n",
|
|
(char *)&f->fmt.sdr.pixelformat);
|
|
|
|
memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
|
|
for (i = 0; i < NUM_FORMATS; i++) {
|
|
if (formats[i].pixelformat == f->fmt.sdr.pixelformat) {
|
|
f->fmt.sdr.buffersize = formats[i].buffersize;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
f->fmt.sdr.pixelformat = formats[0].pixelformat;
|
|
f->fmt.sdr.buffersize = formats[0].buffersize;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hackrf_enum_fmt_sdr(struct file *file, void *priv,
|
|
struct v4l2_fmtdesc *f)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
|
|
dev_dbg(dev->dev, "index=%d\n", f->index);
|
|
|
|
if (f->index >= NUM_FORMATS)
|
|
return -EINVAL;
|
|
|
|
f->pixelformat = formats[f->index].pixelformat;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hackrf_s_tuner(struct file *file, void *priv,
|
|
const struct v4l2_tuner *v)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
int ret;
|
|
|
|
dev_dbg(dev->dev, "index=%d\n", v->index);
|
|
|
|
if (v->index == 0)
|
|
ret = 0;
|
|
else if (v->index == 1)
|
|
ret = 0;
|
|
else
|
|
ret = -EINVAL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int hackrf_g_tuner(struct file *file, void *priv, struct v4l2_tuner *v)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
int ret;
|
|
|
|
dev_dbg(dev->dev, "index=%d\n", v->index);
|
|
|
|
if (v->index == 0) {
|
|
strscpy(v->name, "HackRF ADC", sizeof(v->name));
|
|
v->type = V4L2_TUNER_SDR;
|
|
v->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;
|
|
v->rangelow = bands_adc_dac[0].rangelow;
|
|
v->rangehigh = bands_adc_dac[0].rangehigh;
|
|
ret = 0;
|
|
} else if (v->index == 1) {
|
|
strscpy(v->name, "HackRF RF", sizeof(v->name));
|
|
v->type = V4L2_TUNER_RF;
|
|
v->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;
|
|
v->rangelow = bands_rx_tx[0].rangelow;
|
|
v->rangehigh = bands_rx_tx[0].rangehigh;
|
|
ret = 0;
|
|
} else {
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int hackrf_s_modulator(struct file *file, void *fh,
|
|
const struct v4l2_modulator *a)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
|
|
dev_dbg(dev->dev, "index=%d\n", a->index);
|
|
|
|
return a->index > 1 ? -EINVAL : 0;
|
|
}
|
|
|
|
static int hackrf_g_modulator(struct file *file, void *fh,
|
|
struct v4l2_modulator *a)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
int ret;
|
|
|
|
dev_dbg(dev->dev, "index=%d\n", a->index);
|
|
|
|
if (a->index == 0) {
|
|
strscpy(a->name, "HackRF DAC", sizeof(a->name));
|
|
a->type = V4L2_TUNER_SDR;
|
|
a->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;
|
|
a->rangelow = bands_adc_dac[0].rangelow;
|
|
a->rangehigh = bands_adc_dac[0].rangehigh;
|
|
ret = 0;
|
|
} else if (a->index == 1) {
|
|
strscpy(a->name, "HackRF RF", sizeof(a->name));
|
|
a->type = V4L2_TUNER_RF;
|
|
a->capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS;
|
|
a->rangelow = bands_rx_tx[0].rangelow;
|
|
a->rangehigh = bands_rx_tx[0].rangehigh;
|
|
ret = 0;
|
|
} else {
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int hackrf_s_frequency(struct file *file, void *priv,
|
|
const struct v4l2_frequency *f)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
struct usb_interface *intf = dev->intf;
|
|
struct video_device *vdev = video_devdata(file);
|
|
int ret;
|
|
unsigned int uitmp;
|
|
|
|
dev_dbg(&intf->dev, "tuner=%d type=%d frequency=%u\n",
|
|
f->tuner, f->type, f->frequency);
|
|
|
|
if (f->tuner == 0) {
|
|
uitmp = clamp(f->frequency, bands_adc_dac[0].rangelow,
|
|
bands_adc_dac[0].rangehigh);
|
|
if (vdev->vfl_dir == VFL_DIR_RX) {
|
|
dev->f_adc = uitmp;
|
|
set_bit(RX_ADC_FREQUENCY, &dev->flags);
|
|
} else {
|
|
dev->f_dac = uitmp;
|
|
set_bit(TX_DAC_FREQUENCY, &dev->flags);
|
|
}
|
|
} else if (f->tuner == 1) {
|
|
uitmp = clamp(f->frequency, bands_rx_tx[0].rangelow,
|
|
bands_rx_tx[0].rangehigh);
|
|
if (vdev->vfl_dir == VFL_DIR_RX) {
|
|
dev->f_rx = uitmp;
|
|
set_bit(RX_RF_FREQUENCY, &dev->flags);
|
|
} else {
|
|
dev->f_tx = uitmp;
|
|
set_bit(TX_RF_FREQUENCY, &dev->flags);
|
|
}
|
|
} else {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = hackrf_set_params(dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&intf->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int hackrf_g_frequency(struct file *file, void *priv,
|
|
struct v4l2_frequency *f)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
struct usb_interface *intf = dev->intf;
|
|
struct video_device *vdev = video_devdata(file);
|
|
int ret;
|
|
|
|
dev_dbg(dev->dev, "tuner=%d type=%d\n", f->tuner, f->type);
|
|
|
|
if (f->tuner == 0) {
|
|
f->type = V4L2_TUNER_SDR;
|
|
if (vdev->vfl_dir == VFL_DIR_RX)
|
|
f->frequency = dev->f_adc;
|
|
else
|
|
f->frequency = dev->f_dac;
|
|
} else if (f->tuner == 1) {
|
|
f->type = V4L2_TUNER_RF;
|
|
if (vdev->vfl_dir == VFL_DIR_RX)
|
|
f->frequency = dev->f_rx;
|
|
else
|
|
f->frequency = dev->f_tx;
|
|
} else {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&intf->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int hackrf_enum_freq_bands(struct file *file, void *priv,
|
|
struct v4l2_frequency_band *band)
|
|
{
|
|
struct hackrf_dev *dev = video_drvdata(file);
|
|
int ret;
|
|
|
|
dev_dbg(dev->dev, "tuner=%d type=%d index=%d\n",
|
|
band->tuner, band->type, band->index);
|
|
|
|
if (band->tuner == 0) {
|
|
if (band->index >= ARRAY_SIZE(bands_adc_dac)) {
|
|
ret = -EINVAL;
|
|
} else {
|
|
*band = bands_adc_dac[band->index];
|
|
ret = 0;
|
|
}
|
|
} else if (band->tuner == 1) {
|
|
if (band->index >= ARRAY_SIZE(bands_rx_tx)) {
|
|
ret = -EINVAL;
|
|
} else {
|
|
*band = bands_rx_tx[band->index];
|
|
ret = 0;
|
|
}
|
|
} else {
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ioctl_ops hackrf_ioctl_ops = {
|
|
.vidioc_querycap = hackrf_querycap,
|
|
|
|
.vidioc_s_fmt_sdr_cap = hackrf_s_fmt_sdr,
|
|
.vidioc_g_fmt_sdr_cap = hackrf_g_fmt_sdr,
|
|
.vidioc_enum_fmt_sdr_cap = hackrf_enum_fmt_sdr,
|
|
.vidioc_try_fmt_sdr_cap = hackrf_try_fmt_sdr,
|
|
|
|
.vidioc_s_fmt_sdr_out = hackrf_s_fmt_sdr,
|
|
.vidioc_g_fmt_sdr_out = hackrf_g_fmt_sdr,
|
|
.vidioc_enum_fmt_sdr_out = hackrf_enum_fmt_sdr,
|
|
.vidioc_try_fmt_sdr_out = hackrf_try_fmt_sdr,
|
|
|
|
.vidioc_reqbufs = vb2_ioctl_reqbufs,
|
|
.vidioc_create_bufs = vb2_ioctl_create_bufs,
|
|
.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
|
|
.vidioc_querybuf = vb2_ioctl_querybuf,
|
|
.vidioc_qbuf = vb2_ioctl_qbuf,
|
|
.vidioc_dqbuf = vb2_ioctl_dqbuf,
|
|
.vidioc_expbuf = vb2_ioctl_expbuf,
|
|
|
|
.vidioc_streamon = vb2_ioctl_streamon,
|
|
.vidioc_streamoff = vb2_ioctl_streamoff,
|
|
|
|
.vidioc_s_tuner = hackrf_s_tuner,
|
|
.vidioc_g_tuner = hackrf_g_tuner,
|
|
|
|
.vidioc_s_modulator = hackrf_s_modulator,
|
|
.vidioc_g_modulator = hackrf_g_modulator,
|
|
|
|
.vidioc_s_frequency = hackrf_s_frequency,
|
|
.vidioc_g_frequency = hackrf_g_frequency,
|
|
.vidioc_enum_freq_bands = hackrf_enum_freq_bands,
|
|
|
|
.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
|
|
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
|
|
.vidioc_log_status = v4l2_ctrl_log_status,
|
|
};
|
|
|
|
static const struct v4l2_file_operations hackrf_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = v4l2_fh_open,
|
|
.release = vb2_fop_release,
|
|
.read = vb2_fop_read,
|
|
.write = vb2_fop_write,
|
|
.poll = vb2_fop_poll,
|
|
.mmap = vb2_fop_mmap,
|
|
.unlocked_ioctl = video_ioctl2,
|
|
};
|
|
|
|
static const struct video_device hackrf_template = {
|
|
.name = "HackRF One",
|
|
.release = video_device_release_empty,
|
|
.fops = &hackrf_fops,
|
|
.ioctl_ops = &hackrf_ioctl_ops,
|
|
};
|
|
|
|
static void hackrf_video_release(struct v4l2_device *v)
|
|
{
|
|
struct hackrf_dev *dev = container_of(v, struct hackrf_dev, v4l2_dev);
|
|
|
|
dev_dbg(dev->dev, "\n");
|
|
|
|
v4l2_ctrl_handler_free(&dev->rx_ctrl_handler);
|
|
v4l2_ctrl_handler_free(&dev->tx_ctrl_handler);
|
|
v4l2_device_unregister(&dev->v4l2_dev);
|
|
kfree(dev);
|
|
}
|
|
|
|
static int hackrf_s_ctrl_rx(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct hackrf_dev *dev = container_of(ctrl->handler,
|
|
struct hackrf_dev, rx_ctrl_handler);
|
|
struct usb_interface *intf = dev->intf;
|
|
int ret;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_RF_TUNER_BANDWIDTH_AUTO:
|
|
case V4L2_CID_RF_TUNER_BANDWIDTH:
|
|
set_bit(RX_BANDWIDTH, &dev->flags);
|
|
break;
|
|
case V4L2_CID_RF_TUNER_RF_GAIN:
|
|
set_bit(RX_RF_GAIN, &dev->flags);
|
|
break;
|
|
case V4L2_CID_RF_TUNER_LNA_GAIN:
|
|
set_bit(RX_LNA_GAIN, &dev->flags);
|
|
break;
|
|
case V4L2_CID_RF_TUNER_IF_GAIN:
|
|
set_bit(RX_IF_GAIN, &dev->flags);
|
|
break;
|
|
default:
|
|
dev_dbg(&intf->dev, "unknown ctrl: id=%d name=%s\n",
|
|
ctrl->id, ctrl->name);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = hackrf_set_params(dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&intf->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int hackrf_s_ctrl_tx(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct hackrf_dev *dev = container_of(ctrl->handler,
|
|
struct hackrf_dev, tx_ctrl_handler);
|
|
struct usb_interface *intf = dev->intf;
|
|
int ret;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_RF_TUNER_BANDWIDTH_AUTO:
|
|
case V4L2_CID_RF_TUNER_BANDWIDTH:
|
|
set_bit(TX_BANDWIDTH, &dev->flags);
|
|
break;
|
|
case V4L2_CID_RF_TUNER_LNA_GAIN:
|
|
set_bit(TX_LNA_GAIN, &dev->flags);
|
|
break;
|
|
case V4L2_CID_RF_TUNER_RF_GAIN:
|
|
set_bit(TX_RF_GAIN, &dev->flags);
|
|
break;
|
|
default:
|
|
dev_dbg(&intf->dev, "unknown ctrl: id=%d name=%s\n",
|
|
ctrl->id, ctrl->name);
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = hackrf_set_params(dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&intf->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops hackrf_ctrl_ops_rx = {
|
|
.s_ctrl = hackrf_s_ctrl_rx,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_ops hackrf_ctrl_ops_tx = {
|
|
.s_ctrl = hackrf_s_ctrl_tx,
|
|
};
|
|
|
|
static int hackrf_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct hackrf_dev *dev;
|
|
int ret;
|
|
u8 u8tmp, buf[BUF_SIZE];
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
mutex_init(&dev->v4l2_lock);
|
|
mutex_init(&dev->vb_queue_lock);
|
|
spin_lock_init(&dev->buffer_list_lock);
|
|
INIT_LIST_HEAD(&dev->rx_buffer_list);
|
|
INIT_LIST_HEAD(&dev->tx_buffer_list);
|
|
dev->intf = intf;
|
|
dev->dev = &intf->dev;
|
|
dev->udev = interface_to_usbdev(intf);
|
|
dev->pixelformat = formats[0].pixelformat;
|
|
dev->buffersize = formats[0].buffersize;
|
|
dev->f_adc = bands_adc_dac[0].rangelow;
|
|
dev->f_dac = bands_adc_dac[0].rangelow;
|
|
dev->f_rx = bands_rx_tx[0].rangelow;
|
|
dev->f_tx = bands_rx_tx[0].rangelow;
|
|
set_bit(RX_ADC_FREQUENCY, &dev->flags);
|
|
set_bit(TX_DAC_FREQUENCY, &dev->flags);
|
|
set_bit(RX_RF_FREQUENCY, &dev->flags);
|
|
set_bit(TX_RF_FREQUENCY, &dev->flags);
|
|
|
|
/* Detect device */
|
|
ret = hackrf_ctrl_msg(dev, CMD_BOARD_ID_READ, 0, 0, &u8tmp, 1);
|
|
if (ret == 0)
|
|
ret = hackrf_ctrl_msg(dev, CMD_VERSION_STRING_READ, 0, 0,
|
|
buf, BUF_SIZE);
|
|
if (ret) {
|
|
dev_err(dev->dev, "Could not detect board\n");
|
|
goto err_kfree;
|
|
}
|
|
|
|
buf[BUF_SIZE - 1] = '\0';
|
|
dev_info(dev->dev, "Board ID: %02x\n", u8tmp);
|
|
dev_info(dev->dev, "Firmware version: %s\n", buf);
|
|
|
|
/* Init vb2 queue structure for receiver */
|
|
dev->rx_vb2_queue.type = V4L2_BUF_TYPE_SDR_CAPTURE;
|
|
dev->rx_vb2_queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF |
|
|
VB2_READ;
|
|
dev->rx_vb2_queue.ops = &hackrf_vb2_ops;
|
|
dev->rx_vb2_queue.mem_ops = &vb2_vmalloc_memops;
|
|
dev->rx_vb2_queue.drv_priv = dev;
|
|
dev->rx_vb2_queue.buf_struct_size = sizeof(struct hackrf_buffer);
|
|
dev->rx_vb2_queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
|
|
ret = vb2_queue_init(&dev->rx_vb2_queue);
|
|
if (ret) {
|
|
dev_err(dev->dev, "Could not initialize rx vb2 queue\n");
|
|
goto err_kfree;
|
|
}
|
|
|
|
/* Init vb2 queue structure for transmitter */
|
|
dev->tx_vb2_queue.type = V4L2_BUF_TYPE_SDR_OUTPUT;
|
|
dev->tx_vb2_queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF |
|
|
VB2_WRITE;
|
|
dev->tx_vb2_queue.ops = &hackrf_vb2_ops;
|
|
dev->tx_vb2_queue.mem_ops = &vb2_vmalloc_memops;
|
|
dev->tx_vb2_queue.drv_priv = dev;
|
|
dev->tx_vb2_queue.buf_struct_size = sizeof(struct hackrf_buffer);
|
|
dev->tx_vb2_queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
|
|
ret = vb2_queue_init(&dev->tx_vb2_queue);
|
|
if (ret) {
|
|
dev_err(dev->dev, "Could not initialize tx vb2 queue\n");
|
|
goto err_kfree;
|
|
}
|
|
|
|
/* Register controls for receiver */
|
|
v4l2_ctrl_handler_init(&dev->rx_ctrl_handler, 5);
|
|
dev->rx_bandwidth_auto = v4l2_ctrl_new_std(&dev->rx_ctrl_handler,
|
|
&hackrf_ctrl_ops_rx, V4L2_CID_RF_TUNER_BANDWIDTH_AUTO,
|
|
0, 1, 0, 1);
|
|
dev->rx_bandwidth = v4l2_ctrl_new_std(&dev->rx_ctrl_handler,
|
|
&hackrf_ctrl_ops_rx, V4L2_CID_RF_TUNER_BANDWIDTH,
|
|
1750000, 28000000, 50000, 1750000);
|
|
v4l2_ctrl_auto_cluster(2, &dev->rx_bandwidth_auto, 0, false);
|
|
dev->rx_rf_gain = v4l2_ctrl_new_std(&dev->rx_ctrl_handler,
|
|
&hackrf_ctrl_ops_rx, V4L2_CID_RF_TUNER_RF_GAIN, 0, 12, 12, 0);
|
|
dev->rx_lna_gain = v4l2_ctrl_new_std(&dev->rx_ctrl_handler,
|
|
&hackrf_ctrl_ops_rx, V4L2_CID_RF_TUNER_LNA_GAIN, 0, 40, 8, 0);
|
|
dev->rx_if_gain = v4l2_ctrl_new_std(&dev->rx_ctrl_handler,
|
|
&hackrf_ctrl_ops_rx, V4L2_CID_RF_TUNER_IF_GAIN, 0, 62, 2, 0);
|
|
if (dev->rx_ctrl_handler.error) {
|
|
ret = dev->rx_ctrl_handler.error;
|
|
dev_err(dev->dev, "Could not initialize controls\n");
|
|
goto err_v4l2_ctrl_handler_free_rx;
|
|
}
|
|
v4l2_ctrl_grab(dev->rx_rf_gain, !hackrf_enable_rf_gain_ctrl);
|
|
v4l2_ctrl_handler_setup(&dev->rx_ctrl_handler);
|
|
|
|
/* Register controls for transmitter */
|
|
v4l2_ctrl_handler_init(&dev->tx_ctrl_handler, 4);
|
|
dev->tx_bandwidth_auto = v4l2_ctrl_new_std(&dev->tx_ctrl_handler,
|
|
&hackrf_ctrl_ops_tx, V4L2_CID_RF_TUNER_BANDWIDTH_AUTO,
|
|
0, 1, 0, 1);
|
|
dev->tx_bandwidth = v4l2_ctrl_new_std(&dev->tx_ctrl_handler,
|
|
&hackrf_ctrl_ops_tx, V4L2_CID_RF_TUNER_BANDWIDTH,
|
|
1750000, 28000000, 50000, 1750000);
|
|
v4l2_ctrl_auto_cluster(2, &dev->tx_bandwidth_auto, 0, false);
|
|
dev->tx_lna_gain = v4l2_ctrl_new_std(&dev->tx_ctrl_handler,
|
|
&hackrf_ctrl_ops_tx, V4L2_CID_RF_TUNER_LNA_GAIN, 0, 47, 1, 0);
|
|
dev->tx_rf_gain = v4l2_ctrl_new_std(&dev->tx_ctrl_handler,
|
|
&hackrf_ctrl_ops_tx, V4L2_CID_RF_TUNER_RF_GAIN, 0, 15, 15, 0);
|
|
if (dev->tx_ctrl_handler.error) {
|
|
ret = dev->tx_ctrl_handler.error;
|
|
dev_err(dev->dev, "Could not initialize controls\n");
|
|
goto err_v4l2_ctrl_handler_free_tx;
|
|
}
|
|
v4l2_ctrl_grab(dev->tx_rf_gain, !hackrf_enable_rf_gain_ctrl);
|
|
v4l2_ctrl_handler_setup(&dev->tx_ctrl_handler);
|
|
|
|
/* Register the v4l2_device structure */
|
|
dev->v4l2_dev.release = hackrf_video_release;
|
|
ret = v4l2_device_register(&intf->dev, &dev->v4l2_dev);
|
|
if (ret) {
|
|
dev_err(dev->dev, "Failed to register v4l2-device (%d)\n", ret);
|
|
goto err_v4l2_ctrl_handler_free_tx;
|
|
}
|
|
|
|
/* Init video_device structure for receiver */
|
|
dev->rx_vdev = hackrf_template;
|
|
dev->rx_vdev.queue = &dev->rx_vb2_queue;
|
|
dev->rx_vdev.queue->lock = &dev->vb_queue_lock;
|
|
dev->rx_vdev.v4l2_dev = &dev->v4l2_dev;
|
|
dev->rx_vdev.ctrl_handler = &dev->rx_ctrl_handler;
|
|
dev->rx_vdev.lock = &dev->v4l2_lock;
|
|
dev->rx_vdev.vfl_dir = VFL_DIR_RX;
|
|
dev->rx_vdev.device_caps = V4L2_CAP_STREAMING | V4L2_CAP_READWRITE |
|
|
V4L2_CAP_SDR_CAPTURE | V4L2_CAP_TUNER;
|
|
video_set_drvdata(&dev->rx_vdev, dev);
|
|
ret = video_register_device(&dev->rx_vdev, VFL_TYPE_SDR, -1);
|
|
if (ret) {
|
|
dev_err(dev->dev,
|
|
"Failed to register as video device (%d)\n", ret);
|
|
goto err_v4l2_device_unregister;
|
|
}
|
|
dev_info(dev->dev, "Registered as %s\n",
|
|
video_device_node_name(&dev->rx_vdev));
|
|
|
|
/* Init video_device structure for transmitter */
|
|
dev->tx_vdev = hackrf_template;
|
|
dev->tx_vdev.queue = &dev->tx_vb2_queue;
|
|
dev->tx_vdev.queue->lock = &dev->vb_queue_lock;
|
|
dev->tx_vdev.v4l2_dev = &dev->v4l2_dev;
|
|
dev->tx_vdev.ctrl_handler = &dev->tx_ctrl_handler;
|
|
dev->tx_vdev.lock = &dev->v4l2_lock;
|
|
dev->tx_vdev.vfl_dir = VFL_DIR_TX;
|
|
dev->tx_vdev.device_caps = V4L2_CAP_STREAMING | V4L2_CAP_READWRITE |
|
|
V4L2_CAP_SDR_OUTPUT | V4L2_CAP_MODULATOR;
|
|
video_set_drvdata(&dev->tx_vdev, dev);
|
|
ret = video_register_device(&dev->tx_vdev, VFL_TYPE_SDR, -1);
|
|
if (ret) {
|
|
dev_err(dev->dev,
|
|
"Failed to register as video device (%d)\n", ret);
|
|
goto err_video_unregister_device_rx;
|
|
}
|
|
dev_info(dev->dev, "Registered as %s\n",
|
|
video_device_node_name(&dev->tx_vdev));
|
|
|
|
dev_notice(dev->dev, "SDR API is still slightly experimental and functionality changes may follow\n");
|
|
return 0;
|
|
err_video_unregister_device_rx:
|
|
video_unregister_device(&dev->rx_vdev);
|
|
err_v4l2_device_unregister:
|
|
v4l2_device_unregister(&dev->v4l2_dev);
|
|
err_v4l2_ctrl_handler_free_tx:
|
|
v4l2_ctrl_handler_free(&dev->tx_ctrl_handler);
|
|
err_v4l2_ctrl_handler_free_rx:
|
|
v4l2_ctrl_handler_free(&dev->rx_ctrl_handler);
|
|
err_kfree:
|
|
kfree(dev);
|
|
err:
|
|
dev_dbg(&intf->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* USB device ID list */
|
|
static const struct usb_device_id hackrf_id_table[] = {
|
|
{ USB_DEVICE(0x1d50, 0x6089) }, /* HackRF One */
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, hackrf_id_table);
|
|
|
|
/* USB subsystem interface */
|
|
static struct usb_driver hackrf_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.probe = hackrf_probe,
|
|
.disconnect = hackrf_disconnect,
|
|
.id_table = hackrf_id_table,
|
|
};
|
|
|
|
module_usb_driver(hackrf_driver);
|
|
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_DESCRIPTION("HackRF");
|
|
MODULE_LICENSE("GPL");
|