stm32mp157
/
linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux/linux-5.4.31/drivers/i2c/busses/i2c-piix4.c

1038 lines
28 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and
Philip Edelbrock <phil@netroedge.com>
*/
/*
Supports:
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
AMD Hudson-2, ML, CZ
Hygon CZ
SMSC Victory66
Note: we assume there can only be one device, with one or more
SMBus interfaces.
The device can register multiple i2c_adapters (up to PIIX4_MAX_ADAPTERS).
For devices supporting multiple ports the i2c_adapter should provide
an i2c_algorithm to access them.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/stddef.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/dmi.h>
#include <linux/acpi.h>
#include <linux/io.h>
/* PIIX4 SMBus address offsets */
#define SMBHSTSTS (0 + piix4_smba)
#define SMBHSLVSTS (1 + piix4_smba)
#define SMBHSTCNT (2 + piix4_smba)
#define SMBHSTCMD (3 + piix4_smba)
#define SMBHSTADD (4 + piix4_smba)
#define SMBHSTDAT0 (5 + piix4_smba)
#define SMBHSTDAT1 (6 + piix4_smba)
#define SMBBLKDAT (7 + piix4_smba)
#define SMBSLVCNT (8 + piix4_smba)
#define SMBSHDWCMD (9 + piix4_smba)
#define SMBSLVEVT (0xA + piix4_smba)
#define SMBSLVDAT (0xC + piix4_smba)
/* count for request_region */
#define SMBIOSIZE 9
/* PCI Address Constants */
#define SMBBA 0x090
#define SMBHSTCFG 0x0D2
#define SMBSLVC 0x0D3
#define SMBSHDW1 0x0D4
#define SMBSHDW2 0x0D5
#define SMBREV 0x0D6
/* Other settings */
#define MAX_TIMEOUT 500
#define ENABLE_INT9 0
/* PIIX4 constants */
#define PIIX4_QUICK 0x00
#define PIIX4_BYTE 0x04
#define PIIX4_BYTE_DATA 0x08
#define PIIX4_WORD_DATA 0x0C
#define PIIX4_BLOCK_DATA 0x14
/* Multi-port constants */
#define PIIX4_MAX_ADAPTERS 4
#define HUDSON2_MAIN_PORTS 2 /* HUDSON2, KERNCZ reserves ports 3, 4 */
/* SB800 constants */
#define SB800_PIIX4_SMB_IDX 0xcd6
#define KERNCZ_IMC_IDX 0x3e
#define KERNCZ_IMC_DATA 0x3f
/*
* SB800 port is selected by bits 2:1 of the smb_en register (0x2c)
* or the smb_sel register (0x2e), depending on bit 0 of register 0x2f.
* Hudson-2/Bolton port is always selected by bits 2:1 of register 0x2f.
*/
#define SB800_PIIX4_PORT_IDX 0x2c
#define SB800_PIIX4_PORT_IDX_ALT 0x2e
#define SB800_PIIX4_PORT_IDX_SEL 0x2f
#define SB800_PIIX4_PORT_IDX_MASK 0x06
#define SB800_PIIX4_PORT_IDX_SHIFT 1
/* On kerncz and Hudson2, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */
#define SB800_PIIX4_PORT_IDX_KERNCZ 0x02
#define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18
#define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3
/* insmod parameters */
/* If force is set to anything different from 0, we forcibly enable the
PIIX4. DANGEROUS! */
static int force;
module_param (force, int, 0);
MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
/* If force_addr is set to anything different from 0, we forcibly enable
the PIIX4 at the given address. VERY DANGEROUS! */
static int force_addr;
module_param_hw(force_addr, int, ioport, 0);
MODULE_PARM_DESC(force_addr,
"Forcibly enable the PIIX4 at the given address. "
"EXTREMELY DANGEROUS!");
static int srvrworks_csb5_delay;
static struct pci_driver piix4_driver;
static const struct dmi_system_id piix4_dmi_blacklist[] = {
{
.ident = "Sapphire AM2RD790",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."),
DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"),
},
},
{
.ident = "DFI Lanparty UT 790FX",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."),
DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"),
},
},
{ }
};
/* The IBM entry is in a separate table because we only check it
on Intel-based systems */
static const struct dmi_system_id piix4_dmi_ibm[] = {
{
.ident = "IBM",
.matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), },
},
{ },
};
/*
* SB800 globals
*/
static u8 piix4_port_sel_sb800;
static u8 piix4_port_mask_sb800;
static u8 piix4_port_shift_sb800;
static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = {
" port 0", " port 2", " port 3", " port 4"
};
static const char *piix4_aux_port_name_sb800 = " port 1";
struct i2c_piix4_adapdata {
unsigned short smba;
/* SB800 */
bool sb800_main;
bool notify_imc;
u8 port; /* Port number, shifted */
};
static int piix4_setup(struct pci_dev *PIIX4_dev,
const struct pci_device_id *id)
{
unsigned char temp;
unsigned short piix4_smba;
if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) &&
(PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5))
srvrworks_csb5_delay = 1;
/* On some motherboards, it was reported that accessing the SMBus
caused severe hardware problems */
if (dmi_check_system(piix4_dmi_blacklist)) {
dev_err(&PIIX4_dev->dev,
"Accessing the SMBus on this system is unsafe!\n");
return -EPERM;
}
/* Don't access SMBus on IBM systems which get corrupted eeproms */
if (dmi_check_system(piix4_dmi_ibm) &&
PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) {
dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
"may corrupt your serial eeprom! Refusing to load "
"module!\n");
return -EPERM;
}
/* Determine the address of the SMBus areas */
if (force_addr) {
piix4_smba = force_addr & 0xfff0;
force = 0;
} else {
pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba);
piix4_smba &= 0xfff0;
if(piix4_smba == 0) {
dev_err(&PIIX4_dev->dev, "SMBus base address "
"uninitialized - upgrade BIOS or use "
"force_addr=0xaddr\n");
return -ENODEV;
}
}
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
return -ENODEV;
if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
piix4_smba);
return -EBUSY;
}
pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp);
/* If force_addr is set, we program the new address here. Just to make
sure, we disable the PIIX4 first. */
if (force_addr) {
pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe);
pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba);
pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01);
dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to "
"new address %04x!\n", piix4_smba);
} else if ((temp & 1) == 0) {
if (force) {
/* This should never need to be done, but has been
* noted that many Dell machines have the SMBus
* interface on the PIIX4 disabled!? NOTE: This assumes
* I/O space and other allocations WERE done by the
* Bios! Don't complain if your hardware does weird
* things after enabling this. :') Check for Bios
* updates before resorting to this.
*/
pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
temp | 1);
dev_notice(&PIIX4_dev->dev,
"WARNING: SMBus interface has been FORCEFULLY ENABLED!\n");
} else {
dev_err(&PIIX4_dev->dev,
"SMBus Host Controller not enabled!\n");
release_region(piix4_smba, SMBIOSIZE);
return -ENODEV;
}
}
if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2))
dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n");
else if ((temp & 0x0E) == 0)
dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n");
else
dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration "
"(or code out of date)!\n");
pci_read_config_byte(PIIX4_dev, SMBREV, &temp);
dev_info(&PIIX4_dev->dev,
"SMBus Host Controller at 0x%x, revision %d\n",
piix4_smba, temp);
return piix4_smba;
}
static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
const struct pci_device_id *id, u8 aux)
{
unsigned short piix4_smba;
u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel;
u8 i2ccfg, i2ccfg_offset = 0x10;
/* SB800 and later SMBus does not support forcing address */
if (force || force_addr) {
dev_err(&PIIX4_dev->dev, "SMBus does not support "
"forcing address!\n");
return -EINVAL;
}
/* Determine the address of the SMBus areas */
if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
PIIX4_dev->revision >= 0x41) ||
(PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
PIIX4_dev->revision >= 0x49) ||
(PIIX4_dev->vendor == PCI_VENDOR_ID_HYGON &&
PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS))
smb_en = 0x00;
else
smb_en = (aux) ? 0x28 : 0x2c;
if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, "sb800_piix4_smb")) {
dev_err(&PIIX4_dev->dev,
"SMB base address index region 0x%x already in use.\n",
SB800_PIIX4_SMB_IDX);
return -EBUSY;
}
outb_p(smb_en, SB800_PIIX4_SMB_IDX);
smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
release_region(SB800_PIIX4_SMB_IDX, 2);
if (!smb_en) {
smb_en_status = smba_en_lo & 0x10;
piix4_smba = smba_en_hi << 8;
if (aux)
piix4_smba |= 0x20;
} else {
smb_en_status = smba_en_lo & 0x01;
piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
}
if (!smb_en_status) {
dev_err(&PIIX4_dev->dev,
"SMBus Host Controller not enabled!\n");
return -ENODEV;
}
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
return -ENODEV;
if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
piix4_smba);
return -EBUSY;
}
/* Aux SMBus does not support IRQ information */
if (aux) {
dev_info(&PIIX4_dev->dev,
"Auxiliary SMBus Host Controller at 0x%x\n",
piix4_smba);
return piix4_smba;
}
/* Request the SMBus I2C bus config region */
if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) {
dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region "
"0x%x already in use!\n", piix4_smba + i2ccfg_offset);
release_region(piix4_smba, SMBIOSIZE);
return -EBUSY;
}
i2ccfg = inb_p(piix4_smba + i2ccfg_offset);
release_region(piix4_smba + i2ccfg_offset, 1);
if (i2ccfg & 1)
dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n");
else
dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n");
dev_info(&PIIX4_dev->dev,
"SMBus Host Controller at 0x%x, revision %d\n",
piix4_smba, i2ccfg >> 4);
/* Find which register is used for port selection */
if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD ||
PIIX4_dev->vendor == PCI_VENDOR_ID_HYGON) {
if (PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS ||
(PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
PIIX4_dev->revision >= 0x1F)) {
piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ;
piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ;
piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ;
} else {
piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
}
} else {
if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2,
"sb800_piix4_smb")) {
release_region(piix4_smba, SMBIOSIZE);
return -EBUSY;
}
outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX);
port_sel = inb_p(SB800_PIIX4_SMB_IDX + 1);
piix4_port_sel_sb800 = (port_sel & 0x01) ?
SB800_PIIX4_PORT_IDX_ALT :
SB800_PIIX4_PORT_IDX;
piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
release_region(SB800_PIIX4_SMB_IDX, 2);
}
dev_info(&PIIX4_dev->dev,
"Using register 0x%02x for SMBus port selection\n",
(unsigned int)piix4_port_sel_sb800);
return piix4_smba;
}
static int piix4_setup_aux(struct pci_dev *PIIX4_dev,
const struct pci_device_id *id,
unsigned short base_reg_addr)
{
/* Set up auxiliary SMBus controllers found on some
* AMD chipsets e.g. SP5100 (SB700 derivative) */
unsigned short piix4_smba;
/* Read address of auxiliary SMBus controller */
pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba);
if ((piix4_smba & 1) == 0) {
dev_dbg(&PIIX4_dev->dev,
"Auxiliary SMBus controller not enabled\n");
return -ENODEV;
}
piix4_smba &= 0xfff0;
if (piix4_smba == 0) {
dev_dbg(&PIIX4_dev->dev,
"Auxiliary SMBus base address uninitialized\n");
return -ENODEV;
}
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
return -ENODEV;
if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x "
"already in use!\n", piix4_smba);
return -EBUSY;
}
dev_info(&PIIX4_dev->dev,
"Auxiliary SMBus Host Controller at 0x%x\n",
piix4_smba);
return piix4_smba;
}
static int piix4_transaction(struct i2c_adapter *piix4_adapter)
{
struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter);
unsigned short piix4_smba = adapdata->smba;
int temp;
int result = 0;
int timeout = 0;
dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBHSTDAT1));
/* Make sure the SMBus host is ready to start transmitting */
if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). "
"Resetting...\n", temp);
outb_p(temp, SMBHSTSTS);
if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp);
return -EBUSY;
} else {
dev_dbg(&piix4_adapter->dev, "Successful!\n");
}
}
/* start the transaction by setting bit 6 */
outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
/* We will always wait for a fraction of a second! (See PIIX4 docs errata) */
if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */
usleep_range(2000, 2100);
else
usleep_range(250, 500);
while ((++timeout < MAX_TIMEOUT) &&
((temp = inb_p(SMBHSTSTS)) & 0x01))
usleep_range(250, 500);
/* If the SMBus is still busy, we give up */
if (timeout == MAX_TIMEOUT) {
dev_err(&piix4_adapter->dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
if (temp & 0x10) {
result = -EIO;
dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n");
}
if (temp & 0x08) {
result = -EIO;
dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be "
"locked until next hard reset. (sorry!)\n");
/* Clock stops and slave is stuck in mid-transmission */
}
if (temp & 0x04) {
result = -ENXIO;
dev_dbg(&piix4_adapter->dev, "Error: no response!\n");
}
if (inb_p(SMBHSTSTS) != 0x00)
outb_p(inb(SMBHSTSTS), SMBHSTSTS);
if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
dev_err(&piix4_adapter->dev, "Failed reset at end of "
"transaction (%02x)\n", temp);
}
dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBHSTDAT1));
return result;
}
/* Return negative errno on error. */
static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data)
{
struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
unsigned short piix4_smba = adapdata->smba;
int i, len;
int status;
switch (size) {
case I2C_SMBUS_QUICK:
outb_p((addr << 1) | read_write,
SMBHSTADD);
size = PIIX4_QUICK;
break;
case I2C_SMBUS_BYTE:
outb_p((addr << 1) | read_write,
SMBHSTADD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(command, SMBHSTCMD);
size = PIIX4_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
outb_p((addr << 1) | read_write,
SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(data->byte, SMBHSTDAT0);
size = PIIX4_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
outb_p((addr << 1) | read_write,
SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->word & 0xff, SMBHSTDAT0);
outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
}
size = PIIX4_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
outb_p((addr << 1) | read_write,
SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
return -EINVAL;
outb_p(len, SMBHSTDAT0);
inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= len; i++)
outb_p(data->block[i], SMBBLKDAT);
}
size = PIIX4_BLOCK_DATA;
break;
default:
dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
return -EOPNOTSUPP;
}
outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
status = piix4_transaction(adap);
if (status)
return status;
if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK))
return 0;
switch (size) {
case PIIX4_BYTE:
case PIIX4_BYTE_DATA:
data->byte = inb_p(SMBHSTDAT0);
break;
case PIIX4_WORD_DATA:
data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
break;
case PIIX4_BLOCK_DATA:
data->block[0] = inb_p(SMBHSTDAT0);
if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
return -EPROTO;
inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= data->block[0]; i++)
data->block[i] = inb_p(SMBBLKDAT);
break;
}
return 0;
}
static uint8_t piix4_imc_read(uint8_t idx)
{
outb_p(idx, KERNCZ_IMC_IDX);
return inb_p(KERNCZ_IMC_DATA);
}
static void piix4_imc_write(uint8_t idx, uint8_t value)
{
outb_p(idx, KERNCZ_IMC_IDX);
outb_p(value, KERNCZ_IMC_DATA);
}
static int piix4_imc_sleep(void)
{
int timeout = MAX_TIMEOUT;
if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc"))
return -EBUSY;
/* clear response register */
piix4_imc_write(0x82, 0x00);
/* request ownership flag */
piix4_imc_write(0x83, 0xB4);
/* kick off IMC Mailbox command 96 */
piix4_imc_write(0x80, 0x96);
while (timeout--) {
if (piix4_imc_read(0x82) == 0xfa) {
release_region(KERNCZ_IMC_IDX, 2);
return 0;
}
usleep_range(1000, 2000);
}
release_region(KERNCZ_IMC_IDX, 2);
return -ETIMEDOUT;
}
static void piix4_imc_wakeup(void)
{
int timeout = MAX_TIMEOUT;
if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc"))
return;
/* clear response register */
piix4_imc_write(0x82, 0x00);
/* release ownership flag */
piix4_imc_write(0x83, 0xB5);
/* kick off IMC Mailbox command 96 */
piix4_imc_write(0x80, 0x96);
while (timeout--) {
if (piix4_imc_read(0x82) == 0xfa)
break;
usleep_range(1000, 2000);
}
release_region(KERNCZ_IMC_IDX, 2);
}
/*
* Handles access to multiple SMBus ports on the SB800.
* The port is selected by bits 2:1 of the smb_en register (0x2c).
* Returns negative errno on error.
*
* Note: The selected port must be returned to the initial selection to avoid
* problems on certain systems.
*/
static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data *data)
{
struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
unsigned short piix4_smba = adapdata->smba;
int retries = MAX_TIMEOUT;
int smbslvcnt;
u8 smba_en_lo;
u8 port;
int retval;
if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, "sb800_piix4_smb"))
return -EBUSY;
/* Request the SMBUS semaphore, avoid conflicts with the IMC */
smbslvcnt = inb_p(SMBSLVCNT);
do {
outb_p(smbslvcnt | 0x10, SMBSLVCNT);
/* Check the semaphore status */
smbslvcnt = inb_p(SMBSLVCNT);
if (smbslvcnt & 0x10)
break;
usleep_range(1000, 2000);
} while (--retries);
/* SMBus is still owned by the IMC, we give up */
if (!retries) {
retval = -EBUSY;
goto release;
}
/*
* Notify the IMC (Integrated Micro Controller) if required.
* Among other responsibilities, the IMC is in charge of monitoring
* the System fans and temperature sensors, and act accordingly.
* All this is done through SMBus and can/will collide
* with our transactions if they are long (BLOCK_DATA).
* Therefore we need to request the ownership flag during those
* transactions.
*/
if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc) {
int ret;
ret = piix4_imc_sleep();
switch (ret) {
case -EBUSY:
dev_warn(&adap->dev,
"IMC base address index region 0x%x already in use.\n",
KERNCZ_IMC_IDX);
break;
case -ETIMEDOUT:
dev_warn(&adap->dev,
"Failed to communicate with the IMC.\n");
break;
default:
break;
}
/* If IMC communication fails do not retry */
if (ret) {
dev_warn(&adap->dev,
"Continuing without IMC notification.\n");
adapdata->notify_imc = false;
}
}
outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
port = adapdata->port;
if ((smba_en_lo & piix4_port_mask_sb800) != port)
outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port,
SB800_PIIX4_SMB_IDX + 1);
retval = piix4_access(adap, addr, flags, read_write,
command, size, data);
outb_p(smba_en_lo, SB800_PIIX4_SMB_IDX + 1);
/* Release the semaphore */
outb_p(smbslvcnt | 0x20, SMBSLVCNT);
if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc)
piix4_imc_wakeup();
release:
release_region(SB800_PIIX4_SMB_IDX, 2);
return retval;
}
static u32 piix4_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA;
}
static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = piix4_access,
.functionality = piix4_func,
};
static const struct i2c_algorithm piix4_smbus_algorithm_sb800 = {
.smbus_xfer = piix4_access_sb800,
.functionality = piix4_func,
};
static const struct pci_device_id piix4_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_HYGON, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_OSB4) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_CSB5) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_CSB6) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_HT1000SB) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_HT1100LD) },
{ 0, }
};
MODULE_DEVICE_TABLE (pci, piix4_ids);
static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
static struct i2c_adapter *piix4_aux_adapter;
static int piix4_adapter_count;
static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
bool sb800_main, u8 port, bool notify_imc,
u8 hw_port_nr, const char *name,
struct i2c_adapter **padap)
{
struct i2c_adapter *adap;
struct i2c_piix4_adapdata *adapdata;
int retval;
adap = kzalloc(sizeof(*adap), GFP_KERNEL);
if (adap == NULL) {
release_region(smba, SMBIOSIZE);
return -ENOMEM;
}
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = sb800_main ? &piix4_smbus_algorithm_sb800
: &smbus_algorithm;
adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL);
if (adapdata == NULL) {
kfree(adap);
release_region(smba, SMBIOSIZE);
return -ENOMEM;
}
adapdata->smba = smba;
adapdata->sb800_main = sb800_main;
adapdata->port = port << piix4_port_shift_sb800;
adapdata->notify_imc = notify_imc;
/* set up the sysfs linkage to our parent device */
adap->dev.parent = &dev->dev;
if (has_acpi_companion(&dev->dev)) {
acpi_preset_companion(&adap->dev,
ACPI_COMPANION(&dev->dev),
hw_port_nr);
}
snprintf(adap->name, sizeof(adap->name),
"SMBus PIIX4 adapter%s at %04x", name, smba);
i2c_set_adapdata(adap, adapdata);
retval = i2c_add_adapter(adap);
if (retval) {
kfree(adapdata);
kfree(adap);
release_region(smba, SMBIOSIZE);
return retval;
}
*padap = adap;
return 0;
}
static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba,
bool notify_imc)
{
struct i2c_piix4_adapdata *adapdata;
int port;
int retval;
if (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS ||
(dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
dev->revision >= 0x1F)) {
piix4_adapter_count = HUDSON2_MAIN_PORTS;
} else {
piix4_adapter_count = PIIX4_MAX_ADAPTERS;
}
for (port = 0; port < piix4_adapter_count; port++) {
u8 hw_port_nr = port == 0 ? 0 : port + 1;
retval = piix4_add_adapter(dev, smba, true, port, notify_imc,
hw_port_nr,
piix4_main_port_names_sb800[port],
&piix4_main_adapters[port]);
if (retval < 0)
goto error;
}
return retval;
error:
dev_err(&dev->dev,
"Error setting up SB800 adapters. Unregistering!\n");
while (--port >= 0) {
adapdata = i2c_get_adapdata(piix4_main_adapters[port]);
if (adapdata->smba) {
i2c_del_adapter(piix4_main_adapters[port]);
kfree(adapdata);
kfree(piix4_main_adapters[port]);
piix4_main_adapters[port] = NULL;
}
}
return retval;
}
static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int retval;
bool is_sb800 = false;
if ((dev->vendor == PCI_VENDOR_ID_ATI &&
dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
dev->revision >= 0x40) ||
dev->vendor == PCI_VENDOR_ID_AMD ||
dev->vendor == PCI_VENDOR_ID_HYGON) {
bool notify_imc = false;
is_sb800 = true;
if ((dev->vendor == PCI_VENDOR_ID_AMD ||
dev->vendor == PCI_VENDOR_ID_HYGON) &&
dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) {
u8 imc;
/*
* Detect if IMC is active or not, this method is
* described on coreboot's AMD IMC notes
*/
pci_bus_read_config_byte(dev->bus, PCI_DEVFN(0x14, 3),
0x40, &imc);
if (imc & 0x80)
notify_imc = true;
}
/* base address location etc changed in SB800 */
retval = piix4_setup_sb800(dev, id, 0);
if (retval < 0)
return retval;
/*
* Try to register multiplexed main SMBus adapter,
* give up if we can't
*/
retval = piix4_add_adapters_sb800(dev, retval, notify_imc);
if (retval < 0)
return retval;
} else {
retval = piix4_setup(dev, id);
if (retval < 0)
return retval;
/* Try to register main SMBus adapter, give up if we can't */
retval = piix4_add_adapter(dev, retval, false, 0, false, 0,
"", &piix4_main_adapters[0]);
if (retval < 0)
return retval;
}
/* Check for auxiliary SMBus on some AMD chipsets */
retval = -ENODEV;
if (dev->vendor == PCI_VENDOR_ID_ATI &&
dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) {
if (dev->revision < 0x40) {
retval = piix4_setup_aux(dev, id, 0x58);
} else {
/* SB800 added aux bus too */
retval = piix4_setup_sb800(dev, id, 1);
}
}
if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) {
retval = piix4_setup_sb800(dev, id, 1);
}
if (retval > 0) {
/* Try to add the aux adapter if it exists,
* piix4_add_adapter will clean up if this fails */
piix4_add_adapter(dev, retval, false, 0, false, 1,
is_sb800 ? piix4_aux_port_name_sb800 : "",
&piix4_aux_adapter);
}
return 0;
}
static void piix4_adap_remove(struct i2c_adapter *adap)
{
struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap);
if (adapdata->smba) {
i2c_del_adapter(adap);
if (adapdata->port == (0 << piix4_port_shift_sb800))
release_region(adapdata->smba, SMBIOSIZE);
kfree(adapdata);
kfree(adap);
}
}
static void piix4_remove(struct pci_dev *dev)
{
int port = piix4_adapter_count;
while (--port >= 0) {
if (piix4_main_adapters[port]) {
piix4_adap_remove(piix4_main_adapters[port]);
piix4_main_adapters[port] = NULL;
}
}
if (piix4_aux_adapter) {
piix4_adap_remove(piix4_aux_adapter);
piix4_aux_adapter = NULL;
}
}
static struct pci_driver piix4_driver = {
.name = "piix4_smbus",
.id_table = piix4_ids,
.probe = piix4_probe,
.remove = piix4_remove,
};
module_pci_driver(piix4_driver);
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
"Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("PIIX4 SMBus driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink