linux/linux-5.4.31/arch/powerpc/platforms/maple/pci.c

670 lines
17 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org),
* IBM Corp.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/sections.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/iommu.h>
#include <asm/ppc-pci.h>
#include <asm/isa-bridge.h>
#include "maple.h"
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
static struct pci_controller *u3_agp, *u3_ht, *u4_pcie;
static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
{
for (; node != 0;node = node->sibling) {
const int *bus_range;
const unsigned int *class_code;
int len;
/* For PCI<->PCI bridges or CardBus bridges, we go down */
class_code = of_get_property(node, "class-code", NULL);
if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
continue;
bus_range = of_get_property(node, "bus-range", &len);
if (bus_range != NULL && len > 2 * sizeof(int)) {
if (bus_range[1] > higher)
higher = bus_range[1];
}
higher = fixup_one_level_bus_range(node->child, higher);
}
return higher;
}
/* This routine fixes the "bus-range" property of all bridges in the
* system since they tend to have their "last" member wrong on macs
*
* Note that the bus numbers manipulated here are OF bus numbers, they
* are not Linux bus numbers.
*/
static void __init fixup_bus_range(struct device_node *bridge)
{
int *bus_range;
struct property *prop;
int len;
/* Lookup the "bus-range" property for the hose */
prop = of_find_property(bridge, "bus-range", &len);
if (prop == NULL || prop->value == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %pOF\n",
bridge);
return;
}
bus_range = prop->value;
bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
}
static unsigned long u3_agp_cfa0(u8 devfn, u8 off)
{
return (1 << (unsigned long)PCI_SLOT(devfn)) |
((unsigned long)PCI_FUNC(devfn) << 8) |
((unsigned long)off & 0xFCUL);
}
static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off)
{
return ((unsigned long)bus << 16) |
((unsigned long)devfn << 8) |
((unsigned long)off & 0xFCUL) |
1UL;
}
static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose,
u8 bus, u8 dev_fn, u8 offset)
{
unsigned int caddr;
if (bus == hose->first_busno) {
if (dev_fn < (11 << 3))
return NULL;
caddr = u3_agp_cfa0(dev_fn, offset);
} else
caddr = u3_agp_cfa1(bus, dev_fn, offset);
/* Uninorth will return garbage if we don't read back the value ! */
do {
out_le32(hose->cfg_addr, caddr);
} while (in_le32(hose->cfg_addr) != caddr);
offset &= 0x07;
return hose->cfg_data + offset;
}
static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
*val = in_8(addr);
break;
case 2:
*val = in_le16(addr);
break;
default:
*val = in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose;
volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
out_8(addr, val);
break;
case 2:
out_le16(addr, val);
break;
default:
out_le32(addr, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops u3_agp_pci_ops =
{
.read = u3_agp_read_config,
.write = u3_agp_write_config,
};
static unsigned long u3_ht_cfa0(u8 devfn, u8 off)
{
return (devfn << 8) | off;
}
static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off)
{
return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL;
}
static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
u8 bus, u8 devfn, u8 offset)
{
if (bus == hose->first_busno) {
if (PCI_SLOT(devfn) == 0)
return NULL;
return hose->cfg_data + u3_ht_cfa0(devfn, offset);
} else
return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset);
}
static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset,
int len, u32 *val)
{
volatile void __iomem *addr;
addr = hose->cfg_addr;
addr += ((offset & ~3) << 2) + (4 - len - (offset & 3));
switch (len) {
case 1:
*val = in_8(addr);
break;
case 2:
*val = in_be16(addr);
break;
default:
*val = in_be32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset,
int len, u32 val)
{
volatile void __iomem *addr;
addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3));
if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST)
return PCIBIOS_SUCCESSFUL;
switch (len) {
case 1:
out_8(addr, val);
break;
case 2:
out_be16(addr, val);
break;
default:
out_be32(addr, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
return u3_ht_root_read_config(hose, offset, len, val);
if (offset > 0xff)
return PCIBIOS_BAD_REGISTER_NUMBER;
addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
*val = in_8(addr);
break;
case 2:
*val = in_le16(addr);
break;
default:
*val = in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose;
volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
return u3_ht_root_write_config(hose, offset, len, val);
if (offset > 0xff)
return PCIBIOS_BAD_REGISTER_NUMBER;
addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
out_8(addr, val);
break;
case 2:
out_le16(addr, val);
break;
default:
out_le32(addr, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops u3_ht_pci_ops =
{
.read = u3_ht_read_config,
.write = u3_ht_write_config,
};
static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off)
{
return (1 << PCI_SLOT(devfn)) |
(PCI_FUNC(devfn) << 8) |
((off >> 8) << 28) |
(off & 0xfcu);
}
static unsigned int u4_pcie_cfa1(unsigned int bus, unsigned int devfn,
unsigned int off)
{
return (bus << 16) |
(devfn << 8) |
((off >> 8) << 28) |
(off & 0xfcu) | 1u;
}
static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose,
u8 bus, u8 dev_fn, int offset)
{
unsigned int caddr;
if (bus == hose->first_busno)
caddr = u4_pcie_cfa0(dev_fn, offset);
else
caddr = u4_pcie_cfa1(bus, dev_fn, offset);
/* Uninorth will return garbage if we don't read back the value ! */
do {
out_le32(hose->cfg_addr, caddr);
} while (in_le32(hose->cfg_addr) != caddr);
offset &= 0x03;
return hose->cfg_data + offset;
}
static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose;
volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
if (offset >= 0x1000)
return PCIBIOS_BAD_REGISTER_NUMBER;
addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
*val = in_8(addr);
break;
case 2:
*val = in_le16(addr);
break;
default:
*val = in_le32(addr);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose;
volatile void __iomem *addr;
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
if (offset >= 0x1000)
return PCIBIOS_BAD_REGISTER_NUMBER;
addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
/*
* Note: the caller has already checked that offset is
* suitably aligned and that len is 1, 2 or 4.
*/
switch (len) {
case 1:
out_8(addr, val);
break;
case 2:
out_le16(addr, val);
break;
default:
out_le32(addr, val);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops u4_pcie_pci_ops =
{
.read = u4_pcie_read_config,
.write = u4_pcie_write_config,
};
static void __init setup_u3_agp(struct pci_controller* hose)
{
/* On G5, we move AGP up to high bus number so we don't need
* to reassign bus numbers for HT. If we ever have P2P bridges
* on AGP, we'll have to move pci_assign_all_buses to the
* pci_controller structure so we enable it for AGP and not for
* HT childs.
* We hard code the address because of the different size of
* the reg address cell, we shall fix that by killing struct
* reg_property and using some accessor functions instead
*/
hose->first_busno = 0xf0;
hose->last_busno = 0xff;
hose->ops = &u3_agp_pci_ops;
hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
u3_agp = hose;
}
static void __init setup_u4_pcie(struct pci_controller* hose)
{
/* We currently only implement the "non-atomic" config space, to
* be optimised later.
*/
hose->ops = &u4_pcie_pci_ops;
hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
u4_pcie = hose;
}
static void __init setup_u3_ht(struct pci_controller* hose)
{
hose->ops = &u3_ht_pci_ops;
/* We hard code the address because of the different size of
* the reg address cell, we shall fix that by killing struct
* reg_property and using some accessor functions instead
*/
hose->cfg_data = ioremap(0xf2000000, 0x02000000);
hose->cfg_addr = ioremap(0xf8070000, 0x1000);
hose->first_busno = 0;
hose->last_busno = 0xef;
u3_ht = hose;
}
static int __init maple_add_bridge(struct device_node *dev)
{
int len;
struct pci_controller *hose;
char* disp_name;
const int *bus_range;
int primary = 1;
DBG("Adding PCI host bridge %pOF\n", dev);
bus_range = of_get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %pOF, assume bus 0\n",
dev);
}
hose = pcibios_alloc_controller(dev);
if (hose == NULL)
return -ENOMEM;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
hose->controller_ops = maple_pci_controller_ops;
disp_name = NULL;
if (of_device_is_compatible(dev, "u3-agp")) {
setup_u3_agp(hose);
disp_name = "U3-AGP";
primary = 0;
} else if (of_device_is_compatible(dev, "u3-ht")) {
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
} else if (of_device_is_compatible(dev, "u4-pcie")) {
setup_u4_pcie(hose);
disp_name = "U4-PCIE";
primary = 0;
}
printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
disp_name, hose->first_busno, hose->last_busno);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
pci_process_bridge_OF_ranges(hose, dev, primary);
/* Fixup "bus-range" OF property */
fixup_bus_range(dev);
/* Check for legacy IOs */
isa_bridge_find_early(hose);
return 0;
}
void maple_pci_irq_fixup(struct pci_dev *dev)
{
DBG(" -> maple_pci_irq_fixup\n");
/* Fixup IRQ for PCIe host */
if (u4_pcie != NULL && dev->bus->number == 0 &&
pci_bus_to_host(dev->bus) == u4_pcie) {
printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n");
dev->irq = irq_create_mapping(NULL, 1);
if (dev->irq)
irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW);
}
/* Hide AMD8111 IDE interrupt when in legacy mode so
* the driver calls pci_get_legacy_ide_irq()
*/
if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->device == PCI_DEVICE_ID_AMD_8111_IDE &&
(dev->class & 5) != 5) {
dev->irq = 0;
}
DBG(" <- maple_pci_irq_fixup\n");
}
static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
{
struct pci_controller *hose = pci_bus_to_host(bridge->bus);
struct device_node *np, *child;
if (hose != u3_agp)
return 0;
/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
* assume there is no P2P bridge on the AGP bus, which should be a
* safe assumptions hopefully.
*/
np = hose->dn;
PCI_DN(np)->busno = 0xf0;
for_each_child_of_node(np, child)
PCI_DN(child)->busno = 0xf0;
return 0;
}
void __init maple_pci_init(void)
{
struct device_node *np, *root;
struct device_node *ht = NULL;
/* Probe root PCI hosts, that is on U3 the AGP host and the
* HyperTransport host. That one is actually "kept" around
* and actually added last as it's resource management relies
* on the AGP resources to have been setup first
*/
root = of_find_node_by_path("/");
if (root == NULL) {
printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n");
return;
}
for_each_child_of_node(root, np) {
if (!of_node_is_type(np, "pci") && !of_node_is_type(np, "ht"))
continue;
if ((of_device_is_compatible(np, "u4-pcie") ||
of_device_is_compatible(np, "u3-agp")) &&
maple_add_bridge(np) == 0)
of_node_get(np);
if (of_device_is_compatible(np, "u3-ht")) {
of_node_get(np);
ht = np;
}
}
of_node_put(root);
/* Now setup the HyperTransport host if we found any
*/
if (ht && maple_add_bridge(ht) != 0)
of_node_put(ht);
ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare;
/* Tell pci.c to not change any resource allocations. */
pci_add_flags(PCI_PROBE_ONLY);
}
int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
{
struct device_node *np;
unsigned int defirq = channel ? 15 : 14;
unsigned int irq;
if (pdev->vendor != PCI_VENDOR_ID_AMD ||
pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
return defirq;
np = pci_device_to_OF_node(pdev);
if (np == NULL) {
printk("Failed to locate OF node for IDE %s\n",
pci_name(pdev));
return defirq;
}
irq = irq_of_parse_and_map(np, channel & 0x1);
if (!irq) {
printk("Failed to map onboard IDE interrupt for channel %d\n",
channel);
return defirq;
}
return irq;
}
static void quirk_ipr_msi(struct pci_dev *dev)
{
/* Something prevents MSIs from the IPR from working on Bimini,
* and the driver has no smarts to recover. So disable MSI
* on it for now. */
if (machine_is(maple)) {
dev->no_msi = 1;
dev_info(&dev->dev, "Quirk disabled MSI\n");
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
quirk_ipr_msi);
struct pci_controller_ops maple_pci_controller_ops = {
};