linux/linux-5.4.31/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi

69 lines
2.5 KiB
Plaintext

/*
* QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x500000 ]
*
* Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
fman@500000 {
fman1_rx_0x0a: port@8a000 {
cell-index = <0xa>;
compatible = "fsl,fman-v2-port-rx";
reg = <0x8a000 0x1000>;
};
fman1_tx_0x2a: port@aa000 {
cell-index = <0x2a>;
compatible = "fsl,fman-v2-port-tx";
reg = <0xaa000 0x1000>;
};
ethernet@e4000 {
cell-index = <2>;
compatible = "fsl,fman-dtsec";
reg = <0xe4000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
tbi-handle = <&tbi7>;
ptp-timer = <&ptp_timer1>;
};
mdio@e5120 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,fman-mdio";
reg = <0xe5120 0xee0>;
tbi7: tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
};
};
};