linux/linux-5.4.31/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi

105 lines
3.2 KiB
Plaintext

/*
* QorIQ FMan device tree stub [ controller @ offset 0x400000 ]
*
* Copyright 2011 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
fman0: fman@400000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
compatible = "fsl,fman";
ranges = <0 0x400000 0xfe000>;
reg = <0x400000 0xfe000>;
interrupts = <96 2 0 0>, <16 2 1 1>;
clocks = <&clockgen 3 0>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x40 0xc>;
ptimer-handle = <&ptp_timer0>;
muram@0 {
compatible = "fsl,fman-muram";
reg = <0x0 0x28000>;
};
fman0_oh_0x1: port@81000 {
cell-index = <0x1>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x81000 0x1000>;
};
fman0_oh_0x2: port@82000 {
cell-index = <0x2>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x82000 0x1000>;
};
fman0_oh_0x3: port@83000 {
cell-index = <0x3>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x83000 0x1000>;
};
fman0_oh_0x4: port@84000 {
cell-index = <0x4>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x84000 0x1000>;
};
fman0_oh_0x5: port@85000 {
cell-index = <0x5>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x85000 0x1000>;
status = "disabled";
};
fman0_oh_0x6: port@86000 {
cell-index = <0x6>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x86000 0x1000>;
status = "disabled";
};
fman0_oh_0x7: port@87000 {
cell-index = <0x7>;
compatible = "fsl,fman-v2-port-oh";
reg = <0x87000 0x1000>;
status = "disabled";
};
};
ptp_timer0: ptp-timer@4fe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x4fe000 0x1000>;
interrupts = <96 2 0 0>;
clocks = <&clockgen 3 0>;
};