linux/linux-5.4.31/tools/testing/ktest/examples/include/defaults.conf

# This file holds defaults for most the tests. It defines the options that
# are most common to tests that are likely to be shared.
#
# Note, after including this file, a config file may override any option
# with a DEFAULTS OVERRIDE section.
#

# For those cases that use the same machine to boot a 64 bit
# and a 32 bit version. The MACHINE is the DNS name to get to the
# box (usually different if it was 64 bit or 32 bit) but the
# BOX here is defined as a variable that will be the name of the box
# itself. It is useful for calling scripts that will power cycle
# the box, as only one script needs to be created to power cycle
# even though the box itself has multiple operating systems on it.
# By default, BOX and MACHINE are the same.

DEFAULTS IF NOT DEFINED BOX
BOX := ${MACHINE}


# Consider each box as 64 bit box, unless the config including this file
# has defined BITS = 32

DEFAULTS IF NOT DEFINED BITS
BITS := 64


DEFAULTS

# THIS_DIR is used through out the configs and defaults to ${PWD} which
# is the directory that ktest.pl was called from.

THIS_DIR := ${PWD}


# to organize your configs, having each machine save their configs
# into a separate directly is useful.
CONFIG_DIR := ${THIS_DIR}/configs/${MACHINE}

# Reset the log before running each test.
CLEAR_LOG = 1

# As installing kernels usually requires root privilege, default the
# user on the target as root. It is also required that the target
# allows ssh to root from the host without asking for a password.

SSH_USER = root

# For accesing the machine, we will ssh to root@machine.
SSH := ssh ${SSH_USER}@${MACHINE}

# Update this. The default here is ktest will ssh to the target box
# and run a script called 'run-test' located on that box.
TEST = ${SSH} run-test

# Point build dir to the git repo you use
BUILD_DIR = ${THIS_DIR}/linux.git

# Each machine will have its own output build directory.
OUTPUT_DIR = ${THIS_DIR}/build/${MACHINE}

# Yes this config is focused on x86 (but ktest works for other archs too)
BUILD_TARGET = arch/x86/boot/bzImage
TARGET_IMAGE = /boot/vmlinuz-test

# have directory for the scripts to reboot and power cycle the boxes
SCRIPTS_DIR := ${THIS_DIR}/scripts

# You can have each box/machine have a script to power cycle it.
# Name your script <box>-cycle.
POWER_CYCLE = ${SCRIPTS_DIR}/${BOX}-cycle

# This script is used to power off the box.
POWER_OFF = ${SCRIPTS_DIR}/${BOX}-poweroff

# Keep your test kernels separate from your other kernels.
LOCALVERSION = -test

# The /boot/grub/menu.lst is searched for the line:
#  title Test Kernel
# and ktest will use that kernel to reboot into.
# For grub2 or other boot loaders, you need to set BOOT_TYPE
# to 'script' and define other ways to load the kernel.
# See snowball.conf example.
#
GRUB_MENU = Test Kernel

# The kernel build will use this option.
BUILD_OPTIONS = -j8

# Keeping the log file with the output dir is convenient.
LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log

# Each box should have their own minum configuration
# See min-config.conf
MIN_CONFIG = ${CONFIG_DIR}/config-min

# For things like randconfigs, there may be configs you find that
# are already broken, or there may be some configs that you always
# want set. Uncomment ADD_CONFIG and point it to the make config files
# that set the configs you want to keep on (or off) in your build.
# ADD_CONFIG is usually something to add configs to all machines,
# where as, MIN_CONFIG is specific per machine.
#ADD_CONFIG = ${THIS_DIR}/config-broken ${THIS_DIR}/config-general

# To speed up reboots for bisects and patchcheck, instead of
# waiting 60 seconds for the console to be idle, if this line is
# seen in the console output, ktest will know the good kernel has
# finished rebooting and it will be able to continue the tests.
REBOOT_SUCCESS_LINE = ${MACHINE} login:

# The following is different ways to end the test.
# by setting the variable REBOOT to: none, error, fail or
# something else, ktest will power cycle or reboot the target box
# at the end of the tests.
#
# REBOOT := none
#   Don't do anything at the end of the test.
#
# REBOOT := error
#   Reboot the box if ktest detects an error
#
# REBOOT := fail
#   Do not stop on failure, and after all tests are complete
#   power off the box (for both success and error)
#   This is good to run over a weekend and you don't want to waste
#   electricity.
#

DEFAULTS IF ${REBOOT} == none
REBOOT_ON_SUCCESS = 0
REBOOT_ON_ERROR = 0
POWEROFF_ON_ERROR = 0
POWEROFF_ON_SUCCESS = 0

DEFAULTS ELSE IF ${REBOOT} == error
REBOOT_ON_SUCCESS = 0
REBOOT_ON_ERROR = 1
POWEROFF_ON_ERROR = 0
POWEROFF_ON_SUCCESS = 0

DEFAULTS ELSE IF ${REBOOT} == fail
REBOOT_ON_SUCCESS = 0
POWEROFF_ON_ERROR = 1
POWEROFF_ON_SUCCESS = 1
POWEROFF_AFTER_HALT = 120
DIE_ON_FAILURE = 0

# Store the failure information into this directory
# such as the .config, dmesg, and build log.
STORE_FAILURES = ${THIS_DIR}/failures

DEFAULTS ELSE
REBOOT_ON_SUCCESS = 1
REBOOT_ON_ERROR = 1
POWEROFF_ON_ERROR = 0
POWEROFF_ON_SUCCESS = 0