linux/linux-5.4.31/sound/soc/fsl/mpc8610_hpcd.c

452 lines
13 KiB
C
Raw Normal View History

2024-01-30 10:43:28 +00:00
// SPDX-License-Identifier: GPL-2.0
//
// Freescale MPC8610HPCD ALSA SoC Machine driver
//
// Author: Timur Tabi <timur@freescale.com>
//
// Copyright 2007-2010 Freescale Semiconductor, Inc.
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/fsl/guts.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/slab.h>
#include <sound/soc.h>
#include "fsl_dma.h"
#include "fsl_ssi.h"
#include "fsl_utils.h"
/* There's only one global utilities register */
static phys_addr_t guts_phys;
/**
* mpc8610_hpcd_data: machine-specific ASoC device data
*
* This structure contains data for a single sound platform device on an
* MPC8610 HPCD. Some of the data is taken from the device tree.
*/
struct mpc8610_hpcd_data {
struct snd_soc_dai_link dai[2];
struct snd_soc_card card;
unsigned int dai_format;
unsigned int codec_clk_direction;
unsigned int cpu_clk_direction;
unsigned int clk_frequency;
unsigned int ssi_id; /* 0 = SSI1, 1 = SSI2, etc */
unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */
unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/
char codec_dai_name[DAI_NAME_SIZE];
char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */
};
/**
* mpc8610_hpcd_machine_probe: initialize the board
*
* This function is used to initialize the board-specific hardware.
*
* Here we program the DMACR and PMUXCR registers.
*/
static int mpc8610_hpcd_machine_probe(struct snd_soc_card *card)
{
struct mpc8610_hpcd_data *machine_data =
container_of(card, struct mpc8610_hpcd_data, card);
struct ccsr_guts __iomem *guts;
guts = ioremap(guts_phys, sizeof(struct ccsr_guts));
if (!guts) {
dev_err(card->dev, "could not map global utilities\n");
return -ENOMEM;
}
/* Program the signal routing between the SSI and the DMA */
guts_set_dmacr(guts, machine_data->dma_id[0],
machine_data->dma_channel_id[0],
CCSR_GUTS_DMACR_DEV_SSI);
guts_set_dmacr(guts, machine_data->dma_id[1],
machine_data->dma_channel_id[1],
CCSR_GUTS_DMACR_DEV_SSI);
guts_set_pmuxcr_dma(guts, machine_data->dma_id[0],
machine_data->dma_channel_id[0], 0);
guts_set_pmuxcr_dma(guts, machine_data->dma_id[1],
machine_data->dma_channel_id[1], 0);
switch (machine_data->ssi_id) {
case 0:
clrsetbits_be32(&guts->pmuxcr,
CCSR_GUTS_PMUXCR_SSI1_MASK, CCSR_GUTS_PMUXCR_SSI1_SSI);
break;
case 1:
clrsetbits_be32(&guts->pmuxcr,
CCSR_GUTS_PMUXCR_SSI2_MASK, CCSR_GUTS_PMUXCR_SSI2_SSI);
break;
}
iounmap(guts);
return 0;
}
/**
* mpc8610_hpcd_startup: program the board with various hardware parameters
*
* This function takes board-specific information, like clock frequencies
* and serial data formats, and passes that information to the codec and
* transport drivers.
*/
static int mpc8610_hpcd_startup(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct mpc8610_hpcd_data *machine_data =
container_of(rtd->card, struct mpc8610_hpcd_data, card);
struct device *dev = rtd->card->dev;
int ret = 0;
/* Tell the codec driver what the serial protocol is. */
ret = snd_soc_dai_set_fmt(rtd->codec_dai, machine_data->dai_format);
if (ret < 0) {
dev_err(dev, "could not set codec driver audio format\n");
return ret;
}
/*
* Tell the codec driver what the MCLK frequency is, and whether it's
* a slave or master.
*/
ret = snd_soc_dai_set_sysclk(rtd->codec_dai, 0,
machine_data->clk_frequency,
machine_data->codec_clk_direction);
if (ret < 0) {
dev_err(dev, "could not set codec driver clock params\n");
return ret;
}
return 0;
}
/**
* mpc8610_hpcd_machine_remove: Remove the sound device
*
* This function is called to remove the sound device for one SSI. We
* de-program the DMACR and PMUXCR register.
*/
static int mpc8610_hpcd_machine_remove(struct snd_soc_card *card)
{
struct mpc8610_hpcd_data *machine_data =
container_of(card, struct mpc8610_hpcd_data, card);
struct ccsr_guts __iomem *guts;
guts = ioremap(guts_phys, sizeof(struct ccsr_guts));
if (!guts) {
dev_err(card->dev, "could not map global utilities\n");
return -ENOMEM;
}
/* Restore the signal routing */
guts_set_dmacr(guts, machine_data->dma_id[0],
machine_data->dma_channel_id[0], 0);
guts_set_dmacr(guts, machine_data->dma_id[1],
machine_data->dma_channel_id[1], 0);
switch (machine_data->ssi_id) {
case 0:
clrsetbits_be32(&guts->pmuxcr,
CCSR_GUTS_PMUXCR_SSI1_MASK, CCSR_GUTS_PMUXCR_SSI1_LA);
break;
case 1:
clrsetbits_be32(&guts->pmuxcr,
CCSR_GUTS_PMUXCR_SSI2_MASK, CCSR_GUTS_PMUXCR_SSI2_LA);
break;
}
iounmap(guts);
return 0;
}
/**
* mpc8610_hpcd_ops: ASoC machine driver operations
*/
static const struct snd_soc_ops mpc8610_hpcd_ops = {
.startup = mpc8610_hpcd_startup,
};
/**
* mpc8610_hpcd_probe: platform probe function for the machine driver
*
* Although this is a machine driver, the SSI node is the "master" node with
* respect to audio hardware connections. Therefore, we create a new ASoC
* device for each new SSI node that has a codec attached.
*/
static int mpc8610_hpcd_probe(struct platform_device *pdev)
{
struct device *dev = pdev->dev.parent;
/* ssi_pdev is the platform device for the SSI node that probed us */
struct platform_device *ssi_pdev = to_platform_device(dev);
struct device_node *np = ssi_pdev->dev.of_node;
struct device_node *codec_np = NULL;
struct mpc8610_hpcd_data *machine_data;
struct snd_soc_dai_link_component *comp;
int ret = -ENODEV;
const char *sprop;
const u32 *iprop;
/* Find the codec node for this SSI. */
codec_np = of_parse_phandle(np, "codec-handle", 0);
if (!codec_np) {
dev_err(dev, "invalid codec node\n");
return -EINVAL;
}
machine_data = kzalloc(sizeof(struct mpc8610_hpcd_data), GFP_KERNEL);
if (!machine_data) {
ret = -ENOMEM;
goto error_alloc;
}
comp = devm_kzalloc(&pdev->dev, 6 * sizeof(*comp), GFP_KERNEL);
if (!comp) {
ret = -ENOMEM;
goto error_alloc;
}
machine_data->dai[0].cpus = &comp[0];
machine_data->dai[0].codecs = &comp[1];
machine_data->dai[0].platforms = &comp[2];
machine_data->dai[0].num_cpus = 1;
machine_data->dai[0].num_codecs = 1;
machine_data->dai[0].num_platforms = 1;
machine_data->dai[1].cpus = &comp[3];
machine_data->dai[1].codecs = &comp[4];
machine_data->dai[1].platforms = &comp[5];
machine_data->dai[1].num_cpus = 1;
machine_data->dai[1].num_codecs = 1;
machine_data->dai[1].num_platforms = 1;
machine_data->dai[0].cpus->dai_name = dev_name(&ssi_pdev->dev);
machine_data->dai[0].ops = &mpc8610_hpcd_ops;
/* ASoC core can match codec with device node */
machine_data->dai[0].codecs->of_node = codec_np;
/* The DAI name from the codec (snd_soc_dai_driver.name) */
machine_data->dai[0].codecs->dai_name = "cs4270-hifi";
/* We register two DAIs per SSI, one for playback and the other for
* capture. Currently, we only support codecs that have one DAI for
* both playback and capture.
*/
memcpy(&machine_data->dai[1], &machine_data->dai[0],
sizeof(struct snd_soc_dai_link));
/* Get the device ID */
iprop = of_get_property(np, "cell-index", NULL);
if (!iprop) {
dev_err(&pdev->dev, "cell-index property not found\n");
ret = -EINVAL;
goto error;
}
machine_data->ssi_id = be32_to_cpup(iprop);
/* Get the serial format and clock direction. */
sprop = of_get_property(np, "fsl,mode", NULL);
if (!sprop) {
dev_err(&pdev->dev, "fsl,mode property not found\n");
ret = -EINVAL;
goto error;
}
if (strcasecmp(sprop, "i2s-slave") == 0) {
machine_data->dai_format =
SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM;
machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
/* In i2s-slave mode, the codec has its own clock source, so we
* need to get the frequency from the device tree and pass it to
* the codec driver.
*/
iprop = of_get_property(codec_np, "clock-frequency", NULL);
if (!iprop || !*iprop) {
dev_err(&pdev->dev, "codec bus-frequency "
"property is missing or invalid\n");
ret = -EINVAL;
goto error;
}
machine_data->clk_frequency = be32_to_cpup(iprop);
} else if (strcasecmp(sprop, "i2s-master") == 0) {
machine_data->dai_format =
SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS;
machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
} else if (strcasecmp(sprop, "lj-slave") == 0) {
machine_data->dai_format =
SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM;
machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
} else if (strcasecmp(sprop, "lj-master") == 0) {
machine_data->dai_format =
SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBS_CFS;
machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
} else if (strcasecmp(sprop, "rj-slave") == 0) {
machine_data->dai_format =
SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBM_CFM;
machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
} else if (strcasecmp(sprop, "rj-master") == 0) {
machine_data->dai_format =
SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBS_CFS;
machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
} else if (strcasecmp(sprop, "ac97-slave") == 0) {
machine_data->dai_format =
SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBM_CFM;
machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
} else if (strcasecmp(sprop, "ac97-master") == 0) {
machine_data->dai_format =
SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBS_CFS;
machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
} else {
dev_err(&pdev->dev,
"unrecognized fsl,mode property '%s'\n", sprop);
ret = -EINVAL;
goto error;
}
if (!machine_data->clk_frequency) {
dev_err(&pdev->dev, "unknown clock frequency\n");
ret = -EINVAL;
goto error;
}
/* Find the playback DMA channel to use. */
machine_data->dai[0].platforms->name = machine_data->platform_name[0];
ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma",
&machine_data->dai[0],
&machine_data->dma_channel_id[0],
&machine_data->dma_id[0]);
if (ret) {
dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n");
goto error;
}
/* Find the capture DMA channel to use. */
machine_data->dai[1].platforms->name = machine_data->platform_name[1];
ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma",
&machine_data->dai[1],
&machine_data->dma_channel_id[1],
&machine_data->dma_id[1]);
if (ret) {
dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n");
goto error;
}
/* Initialize our DAI data structure. */
machine_data->dai[0].stream_name = "playback";
machine_data->dai[1].stream_name = "capture";
machine_data->dai[0].name = machine_data->dai[0].stream_name;
machine_data->dai[1].name = machine_data->dai[1].stream_name;
machine_data->card.probe = mpc8610_hpcd_machine_probe;
machine_data->card.remove = mpc8610_hpcd_machine_remove;
machine_data->card.name = pdev->name; /* The platform driver name */
machine_data->card.owner = THIS_MODULE;
machine_data->card.dev = &pdev->dev;
machine_data->card.num_links = 2;
machine_data->card.dai_link = machine_data->dai;
/* Register with ASoC */
ret = snd_soc_register_card(&machine_data->card);
if (ret) {
dev_err(&pdev->dev, "could not register card\n");
goto error;
}
of_node_put(codec_np);
return 0;
error:
kfree(machine_data);
error_alloc:
of_node_put(codec_np);
return ret;
}
/**
* mpc8610_hpcd_remove: remove the platform device
*
* This function is called when the platform device is removed.
*/
static int mpc8610_hpcd_remove(struct platform_device *pdev)
{
struct snd_soc_card *card = platform_get_drvdata(pdev);
struct mpc8610_hpcd_data *machine_data =
container_of(card, struct mpc8610_hpcd_data, card);
snd_soc_unregister_card(card);
kfree(machine_data);
return 0;
}
static struct platform_driver mpc8610_hpcd_driver = {
.probe = mpc8610_hpcd_probe,
.remove = mpc8610_hpcd_remove,
.driver = {
/* The name must match 'compatible' property in the device tree,
* in lowercase letters.
*/
.name = "snd-soc-mpc8610hpcd",
},
};
/**
* mpc8610_hpcd_init: machine driver initialization.
*
* This function is called when this module is loaded.
*/
static int __init mpc8610_hpcd_init(void)
{
struct device_node *guts_np;
struct resource res;
pr_info("Freescale MPC8610 HPCD ALSA SoC machine driver\n");
/* Get the physical address of the global utilities registers */
guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts");
if (of_address_to_resource(guts_np, 0, &res)) {
pr_err("mpc8610-hpcd: missing/invalid global utilities node\n");
return -EINVAL;
}
guts_phys = res.start;
return platform_driver_register(&mpc8610_hpcd_driver);
}
/**
* mpc8610_hpcd_exit: machine driver exit
*
* This function is called when this driver is unloaded.
*/
static void __exit mpc8610_hpcd_exit(void)
{
platform_driver_unregister(&mpc8610_hpcd_driver);
}
module_init(mpc8610_hpcd_init);
module_exit(mpc8610_hpcd_exit);
MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
MODULE_DESCRIPTION("Freescale MPC8610 HPCD ALSA SoC machine driver");
MODULE_LICENSE("GPL v2");