1085 lines
31 KiB
C
1085 lines
31 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
|
/*
|
||
|
|
* wm8978.c -- WM8978 ALSA SoC Audio Codec driver
|
||
|
|
*
|
||
|
|
* Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
||
|
|
* Copyright (C) 2007 Carlos Munoz <carlos@kenati.com>
|
||
|
|
* Copyright 2006-2009 Wolfson Microelectronics PLC.
|
||
|
|
* Based on wm8974 and wm8990 by Liam Girdwood <lrg@slimlogic.co.uk>
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <linux/module.h>
|
||
|
|
#include <linux/moduleparam.h>
|
||
|
|
#include <linux/kernel.h>
|
||
|
|
#include <linux/init.h>
|
||
|
|
#include <linux/delay.h>
|
||
|
|
#include <linux/pm.h>
|
||
|
|
#include <linux/i2c.h>
|
||
|
|
#include <linux/regmap.h>
|
||
|
|
#include <linux/slab.h>
|
||
|
|
#include <sound/core.h>
|
||
|
|
#include <sound/pcm.h>
|
||
|
|
#include <sound/pcm_params.h>
|
||
|
|
#include <sound/soc.h>
|
||
|
|
#include <sound/initval.h>
|
||
|
|
#include <sound/tlv.h>
|
||
|
|
#include <asm/div64.h>
|
||
|
|
|
||
|
|
#include "wm8978.h"
|
||
|
|
|
||
|
|
static const struct reg_default wm8978_reg_defaults[] = {
|
||
|
|
{ 1, 0x0000 },
|
||
|
|
{ 2, 0x0000 },
|
||
|
|
{ 3, 0x0000 },
|
||
|
|
{ 4, 0x0050 },
|
||
|
|
{ 5, 0x0000 },
|
||
|
|
{ 6, 0x0140 },
|
||
|
|
{ 7, 0x0000 },
|
||
|
|
{ 8, 0x0000 },
|
||
|
|
{ 9, 0x0000 },
|
||
|
|
{ 10, 0x0000 },
|
||
|
|
{ 11, 0x00ff },
|
||
|
|
{ 12, 0x00ff },
|
||
|
|
{ 13, 0x0000 },
|
||
|
|
{ 14, 0x0100 },
|
||
|
|
{ 15, 0x00ff },
|
||
|
|
{ 16, 0x00ff },
|
||
|
|
{ 17, 0x0000 },
|
||
|
|
{ 18, 0x012c },
|
||
|
|
{ 19, 0x002c },
|
||
|
|
{ 20, 0x002c },
|
||
|
|
{ 21, 0x002c },
|
||
|
|
{ 22, 0x002c },
|
||
|
|
{ 23, 0x0000 },
|
||
|
|
{ 24, 0x0032 },
|
||
|
|
{ 25, 0x0000 },
|
||
|
|
{ 26, 0x0000 },
|
||
|
|
{ 27, 0x0000 },
|
||
|
|
{ 28, 0x0000 },
|
||
|
|
{ 29, 0x0000 },
|
||
|
|
{ 30, 0x0000 },
|
||
|
|
{ 31, 0x0000 },
|
||
|
|
{ 32, 0x0038 },
|
||
|
|
{ 33, 0x000b },
|
||
|
|
{ 34, 0x0032 },
|
||
|
|
{ 35, 0x0000 },
|
||
|
|
{ 36, 0x0008 },
|
||
|
|
{ 37, 0x000c },
|
||
|
|
{ 38, 0x0093 },
|
||
|
|
{ 39, 0x00e9 },
|
||
|
|
{ 40, 0x0000 },
|
||
|
|
{ 41, 0x0000 },
|
||
|
|
{ 42, 0x0000 },
|
||
|
|
{ 43, 0x0000 },
|
||
|
|
{ 44, 0x0033 },
|
||
|
|
{ 45, 0x0010 },
|
||
|
|
{ 46, 0x0010 },
|
||
|
|
{ 47, 0x0100 },
|
||
|
|
{ 48, 0x0100 },
|
||
|
|
{ 49, 0x0002 },
|
||
|
|
{ 50, 0x0001 },
|
||
|
|
{ 51, 0x0001 },
|
||
|
|
{ 52, 0x0039 },
|
||
|
|
{ 53, 0x0039 },
|
||
|
|
{ 54, 0x0039 },
|
||
|
|
{ 55, 0x0039 },
|
||
|
|
{ 56, 0x0001 },
|
||
|
|
{ 57, 0x0001 },
|
||
|
|
};
|
||
|
|
|
||
|
|
static bool wm8978_volatile(struct device *dev, unsigned int reg)
|
||
|
|
{
|
||
|
|
return reg == WM8978_RESET;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* codec private data */
|
||
|
|
struct wm8978_priv {
|
||
|
|
struct regmap *regmap;
|
||
|
|
unsigned int f_pllout;
|
||
|
|
unsigned int f_mclk;
|
||
|
|
unsigned int f_256fs;
|
||
|
|
unsigned int f_opclk;
|
||
|
|
int mclk_idx;
|
||
|
|
enum wm8978_sysclk_src sysclk;
|
||
|
|
};
|
||
|
|
|
||
|
|
static const char *wm8978_companding[] = {"Off", "NC", "u-law", "A-law"};
|
||
|
|
static const char *wm8978_eqmode[] = {"Capture", "Playback"};
|
||
|
|
static const char *wm8978_bw[] = {"Narrow", "Wide"};
|
||
|
|
static const char *wm8978_eq1[] = {"80Hz", "105Hz", "135Hz", "175Hz"};
|
||
|
|
static const char *wm8978_eq2[] = {"230Hz", "300Hz", "385Hz", "500Hz"};
|
||
|
|
static const char *wm8978_eq3[] = {"650Hz", "850Hz", "1.1kHz", "1.4kHz"};
|
||
|
|
static const char *wm8978_eq4[] = {"1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz"};
|
||
|
|
static const char *wm8978_eq5[] = {"5.3kHz", "6.9kHz", "9kHz", "11.7kHz"};
|
||
|
|
static const char *wm8978_alc3[] = {"ALC", "Limiter"};
|
||
|
|
static const char *wm8978_alc1[] = {"Off", "Right", "Left", "Both"};
|
||
|
|
|
||
|
|
static SOC_ENUM_SINGLE_DECL(adc_compand, WM8978_COMPANDING_CONTROL, 1,
|
||
|
|
wm8978_companding);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(dac_compand, WM8978_COMPANDING_CONTROL, 3,
|
||
|
|
wm8978_companding);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(eqmode, WM8978_EQ1, 8, wm8978_eqmode);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(eq1, WM8978_EQ1, 5, wm8978_eq1);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(eq2bw, WM8978_EQ2, 8, wm8978_bw);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(eq2, WM8978_EQ2, 5, wm8978_eq2);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(eq3bw, WM8978_EQ3, 8, wm8978_bw);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(eq3, WM8978_EQ3, 5, wm8978_eq3);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(eq4bw, WM8978_EQ4, 8, wm8978_bw);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(eq4, WM8978_EQ4, 5, wm8978_eq4);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(eq5, WM8978_EQ5, 5, wm8978_eq5);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(alc3, WM8978_ALC_CONTROL_3, 8, wm8978_alc3);
|
||
|
|
static SOC_ENUM_SINGLE_DECL(alc1, WM8978_ALC_CONTROL_1, 7, wm8978_alc1);
|
||
|
|
|
||
|
|
static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1);
|
||
|
|
static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
|
||
|
|
static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0);
|
||
|
|
static const DECLARE_TLV_DB_SCALE(spk_tlv, -5700, 100, 0);
|
||
|
|
static const DECLARE_TLV_DB_SCALE(boost_tlv, -1500, 300, 1);
|
||
|
|
static const DECLARE_TLV_DB_SCALE(limiter_tlv, 0, 100, 0);
|
||
|
|
|
||
|
|
static const struct snd_kcontrol_new wm8978_snd_controls[] = {
|
||
|
|
|
||
|
|
SOC_SINGLE("Digital Loopback Switch",
|
||
|
|
WM8978_COMPANDING_CONTROL, 0, 1, 0),
|
||
|
|
|
||
|
|
SOC_ENUM("ADC Companding", adc_compand),
|
||
|
|
SOC_ENUM("DAC Companding", dac_compand),
|
||
|
|
|
||
|
|
SOC_DOUBLE("DAC Inversion Switch", WM8978_DAC_CONTROL, 0, 1, 1, 0),
|
||
|
|
|
||
|
|
SOC_DOUBLE_R_TLV("PCM Volume",
|
||
|
|
WM8978_LEFT_DAC_DIGITAL_VOLUME, WM8978_RIGHT_DAC_DIGITAL_VOLUME,
|
||
|
|
0, 255, 0, digital_tlv),
|
||
|
|
|
||
|
|
SOC_SINGLE("High Pass Filter Switch", WM8978_ADC_CONTROL, 8, 1, 0),
|
||
|
|
SOC_SINGLE("High Pass Cut Off", WM8978_ADC_CONTROL, 4, 7, 0),
|
||
|
|
SOC_DOUBLE("ADC Inversion Switch", WM8978_ADC_CONTROL, 0, 1, 1, 0),
|
||
|
|
|
||
|
|
SOC_DOUBLE_R_TLV("ADC Volume",
|
||
|
|
WM8978_LEFT_ADC_DIGITAL_VOLUME, WM8978_RIGHT_ADC_DIGITAL_VOLUME,
|
||
|
|
0, 255, 0, digital_tlv),
|
||
|
|
|
||
|
|
SOC_ENUM("Equaliser Function", eqmode),
|
||
|
|
SOC_ENUM("EQ1 Cut Off", eq1),
|
||
|
|
SOC_SINGLE_TLV("EQ1 Volume", WM8978_EQ1, 0, 24, 1, eq_tlv),
|
||
|
|
|
||
|
|
SOC_ENUM("Equaliser EQ2 Bandwidth", eq2bw),
|
||
|
|
SOC_ENUM("EQ2 Cut Off", eq2),
|
||
|
|
SOC_SINGLE_TLV("EQ2 Volume", WM8978_EQ2, 0, 24, 1, eq_tlv),
|
||
|
|
|
||
|
|
SOC_ENUM("Equaliser EQ3 Bandwidth", eq3bw),
|
||
|
|
SOC_ENUM("EQ3 Cut Off", eq3),
|
||
|
|
SOC_SINGLE_TLV("EQ3 Volume", WM8978_EQ3, 0, 24, 1, eq_tlv),
|
||
|
|
|
||
|
|
SOC_ENUM("Equaliser EQ4 Bandwidth", eq4bw),
|
||
|
|
SOC_ENUM("EQ4 Cut Off", eq4),
|
||
|
|
SOC_SINGLE_TLV("EQ4 Volume", WM8978_EQ4, 0, 24, 1, eq_tlv),
|
||
|
|
|
||
|
|
SOC_ENUM("EQ5 Cut Off", eq5),
|
||
|
|
SOC_SINGLE_TLV("EQ5 Volume", WM8978_EQ5, 0, 24, 1, eq_tlv),
|
||
|
|
|
||
|
|
SOC_SINGLE("DAC Playback Limiter Switch",
|
||
|
|
WM8978_DAC_LIMITER_1, 8, 1, 0),
|
||
|
|
SOC_SINGLE("DAC Playback Limiter Decay",
|
||
|
|
WM8978_DAC_LIMITER_1, 4, 15, 0),
|
||
|
|
SOC_SINGLE("DAC Playback Limiter Attack",
|
||
|
|
WM8978_DAC_LIMITER_1, 0, 15, 0),
|
||
|
|
|
||
|
|
SOC_SINGLE("DAC Playback Limiter Threshold",
|
||
|
|
WM8978_DAC_LIMITER_2, 4, 7, 0),
|
||
|
|
SOC_SINGLE_TLV("DAC Playback Limiter Volume",
|
||
|
|
WM8978_DAC_LIMITER_2, 0, 12, 0, limiter_tlv),
|
||
|
|
|
||
|
|
SOC_ENUM("ALC Enable Switch", alc1),
|
||
|
|
SOC_SINGLE("ALC Capture Min Gain", WM8978_ALC_CONTROL_1, 0, 7, 0),
|
||
|
|
SOC_SINGLE("ALC Capture Max Gain", WM8978_ALC_CONTROL_1, 3, 7, 0),
|
||
|
|
|
||
|
|
SOC_SINGLE("ALC Capture Hold", WM8978_ALC_CONTROL_2, 4, 10, 0),
|
||
|
|
SOC_SINGLE("ALC Capture Target", WM8978_ALC_CONTROL_2, 0, 15, 0),
|
||
|
|
|
||
|
|
SOC_ENUM("ALC Capture Mode", alc3),
|
||
|
|
SOC_SINGLE("ALC Capture Decay", WM8978_ALC_CONTROL_3, 4, 10, 0),
|
||
|
|
SOC_SINGLE("ALC Capture Attack", WM8978_ALC_CONTROL_3, 0, 10, 0),
|
||
|
|
|
||
|
|
SOC_SINGLE("ALC Capture Noise Gate Switch", WM8978_NOISE_GATE, 3, 1, 0),
|
||
|
|
SOC_SINGLE("ALC Capture Noise Gate Threshold",
|
||
|
|
WM8978_NOISE_GATE, 0, 7, 0),
|
||
|
|
|
||
|
|
SOC_DOUBLE_R("Capture PGA ZC Switch",
|
||
|
|
WM8978_LEFT_INP_PGA_CONTROL, WM8978_RIGHT_INP_PGA_CONTROL,
|
||
|
|
7, 1, 0),
|
||
|
|
|
||
|
|
/* OUT1 - Headphones */
|
||
|
|
SOC_DOUBLE_R("Headphone Playback ZC Switch",
|
||
|
|
WM8978_LOUT1_HP_CONTROL, WM8978_ROUT1_HP_CONTROL, 7, 1, 0),
|
||
|
|
|
||
|
|
SOC_DOUBLE_R_TLV("Headphone Playback Volume",
|
||
|
|
WM8978_LOUT1_HP_CONTROL, WM8978_ROUT1_HP_CONTROL,
|
||
|
|
0, 63, 0, spk_tlv),
|
||
|
|
|
||
|
|
/* OUT2 - Speakers */
|
||
|
|
SOC_DOUBLE_R("Speaker Playback ZC Switch",
|
||
|
|
WM8978_LOUT2_SPK_CONTROL, WM8978_ROUT2_SPK_CONTROL, 7, 1, 0),
|
||
|
|
|
||
|
|
SOC_DOUBLE_R_TLV("Speaker Playback Volume",
|
||
|
|
WM8978_LOUT2_SPK_CONTROL, WM8978_ROUT2_SPK_CONTROL,
|
||
|
|
0, 63, 0, spk_tlv),
|
||
|
|
|
||
|
|
/* OUT3/4 - Line Output */
|
||
|
|
SOC_DOUBLE_R("Line Playback Switch",
|
||
|
|
WM8978_OUT3_MIXER_CONTROL, WM8978_OUT4_MIXER_CONTROL, 6, 1, 1),
|
||
|
|
|
||
|
|
/* Mixer #3: Boost (Input) mixer */
|
||
|
|
SOC_DOUBLE_R("PGA Boost (+20dB)",
|
||
|
|
WM8978_LEFT_ADC_BOOST_CONTROL, WM8978_RIGHT_ADC_BOOST_CONTROL,
|
||
|
|
8, 1, 0),
|
||
|
|
SOC_DOUBLE_R_TLV("L2/R2 Boost Volume",
|
||
|
|
WM8978_LEFT_ADC_BOOST_CONTROL, WM8978_RIGHT_ADC_BOOST_CONTROL,
|
||
|
|
4, 7, 0, boost_tlv),
|
||
|
|
SOC_DOUBLE_R_TLV("Aux Boost Volume",
|
||
|
|
WM8978_LEFT_ADC_BOOST_CONTROL, WM8978_RIGHT_ADC_BOOST_CONTROL,
|
||
|
|
0, 7, 0, boost_tlv),
|
||
|
|
|
||
|
|
/* Input PGA volume */
|
||
|
|
SOC_DOUBLE_R_TLV("Input PGA Volume",
|
||
|
|
WM8978_LEFT_INP_PGA_CONTROL, WM8978_RIGHT_INP_PGA_CONTROL,
|
||
|
|
0, 63, 0, inpga_tlv),
|
||
|
|
|
||
|
|
/* Headphone */
|
||
|
|
SOC_DOUBLE_R("Headphone Switch",
|
||
|
|
WM8978_LOUT1_HP_CONTROL, WM8978_ROUT1_HP_CONTROL, 6, 1, 1),
|
||
|
|
|
||
|
|
/* Speaker */
|
||
|
|
SOC_DOUBLE_R("Speaker Switch",
|
||
|
|
WM8978_LOUT2_SPK_CONTROL, WM8978_ROUT2_SPK_CONTROL, 6, 1, 1),
|
||
|
|
|
||
|
|
/* DAC / ADC oversampling */
|
||
|
|
SOC_SINGLE("DAC 128x Oversampling Switch", WM8978_DAC_CONTROL,
|
||
|
|
5, 1, 0),
|
||
|
|
SOC_SINGLE("ADC 128x Oversampling Switch", WM8978_ADC_CONTROL,
|
||
|
|
5, 1, 0),
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Mixer #1: Output (OUT1, OUT2) Mixer: mix AUX, Input mixer output and DAC */
|
||
|
|
static const struct snd_kcontrol_new wm8978_left_out_mixer[] = {
|
||
|
|
SOC_DAPM_SINGLE("Line Bypass Switch", WM8978_LEFT_MIXER_CONTROL, 1, 1, 0),
|
||
|
|
SOC_DAPM_SINGLE("Aux Playback Switch", WM8978_LEFT_MIXER_CONTROL, 5, 1, 0),
|
||
|
|
SOC_DAPM_SINGLE("PCM Playback Switch", WM8978_LEFT_MIXER_CONTROL, 0, 1, 0),
|
||
|
|
};
|
||
|
|
|
||
|
|
static const struct snd_kcontrol_new wm8978_right_out_mixer[] = {
|
||
|
|
SOC_DAPM_SINGLE("Line Bypass Switch", WM8978_RIGHT_MIXER_CONTROL, 1, 1, 0),
|
||
|
|
SOC_DAPM_SINGLE("Aux Playback Switch", WM8978_RIGHT_MIXER_CONTROL, 5, 1, 0),
|
||
|
|
SOC_DAPM_SINGLE("PCM Playback Switch", WM8978_RIGHT_MIXER_CONTROL, 0, 1, 0),
|
||
|
|
};
|
||
|
|
|
||
|
|
/* OUT3/OUT4 Mixer not implemented */
|
||
|
|
|
||
|
|
/* Mixer #2: Input PGA Mute */
|
||
|
|
static const struct snd_kcontrol_new wm8978_left_input_mixer[] = {
|
||
|
|
SOC_DAPM_SINGLE("L2 Switch", WM8978_INPUT_CONTROL, 2, 1, 0),
|
||
|
|
SOC_DAPM_SINGLE("MicN Switch", WM8978_INPUT_CONTROL, 1, 1, 0),
|
||
|
|
SOC_DAPM_SINGLE("MicP Switch", WM8978_INPUT_CONTROL, 0, 1, 0),
|
||
|
|
};
|
||
|
|
static const struct snd_kcontrol_new wm8978_right_input_mixer[] = {
|
||
|
|
SOC_DAPM_SINGLE("R2 Switch", WM8978_INPUT_CONTROL, 6, 1, 0),
|
||
|
|
SOC_DAPM_SINGLE("MicN Switch", WM8978_INPUT_CONTROL, 5, 1, 0),
|
||
|
|
SOC_DAPM_SINGLE("MicP Switch", WM8978_INPUT_CONTROL, 4, 1, 0),
|
||
|
|
};
|
||
|
|
|
||
|
|
static const struct snd_soc_dapm_widget wm8978_dapm_widgets[] = {
|
||
|
|
SND_SOC_DAPM_DAC("Left DAC", "Left HiFi Playback",
|
||
|
|
WM8978_POWER_MANAGEMENT_3, 0, 0),
|
||
|
|
SND_SOC_DAPM_DAC("Right DAC", "Right HiFi Playback",
|
||
|
|
WM8978_POWER_MANAGEMENT_3, 1, 0),
|
||
|
|
SND_SOC_DAPM_ADC("Left ADC", "Left HiFi Capture",
|
||
|
|
WM8978_POWER_MANAGEMENT_2, 0, 0),
|
||
|
|
SND_SOC_DAPM_ADC("Right ADC", "Right HiFi Capture",
|
||
|
|
WM8978_POWER_MANAGEMENT_2, 1, 0),
|
||
|
|
|
||
|
|
/* Mixer #1: OUT1,2 */
|
||
|
|
SOC_MIXER_ARRAY("Left Output Mixer", WM8978_POWER_MANAGEMENT_3,
|
||
|
|
2, 0, wm8978_left_out_mixer),
|
||
|
|
SOC_MIXER_ARRAY("Right Output Mixer", WM8978_POWER_MANAGEMENT_3,
|
||
|
|
3, 0, wm8978_right_out_mixer),
|
||
|
|
|
||
|
|
SOC_MIXER_ARRAY("Left Input Mixer", WM8978_POWER_MANAGEMENT_2,
|
||
|
|
2, 0, wm8978_left_input_mixer),
|
||
|
|
SOC_MIXER_ARRAY("Right Input Mixer", WM8978_POWER_MANAGEMENT_2,
|
||
|
|
3, 0, wm8978_right_input_mixer),
|
||
|
|
|
||
|
|
SND_SOC_DAPM_PGA("Left Boost Mixer", WM8978_POWER_MANAGEMENT_2,
|
||
|
|
4, 0, NULL, 0),
|
||
|
|
SND_SOC_DAPM_PGA("Right Boost Mixer", WM8978_POWER_MANAGEMENT_2,
|
||
|
|
5, 0, NULL, 0),
|
||
|
|
|
||
|
|
SND_SOC_DAPM_PGA("Left Capture PGA", WM8978_LEFT_INP_PGA_CONTROL,
|
||
|
|
6, 1, NULL, 0),
|
||
|
|
SND_SOC_DAPM_PGA("Right Capture PGA", WM8978_RIGHT_INP_PGA_CONTROL,
|
||
|
|
6, 1, NULL, 0),
|
||
|
|
|
||
|
|
SND_SOC_DAPM_PGA("Left Headphone Out", WM8978_POWER_MANAGEMENT_2,
|
||
|
|
7, 0, NULL, 0),
|
||
|
|
SND_SOC_DAPM_PGA("Right Headphone Out", WM8978_POWER_MANAGEMENT_2,
|
||
|
|
8, 0, NULL, 0),
|
||
|
|
|
||
|
|
SND_SOC_DAPM_PGA("Left Speaker Out", WM8978_POWER_MANAGEMENT_3,
|
||
|
|
6, 0, NULL, 0),
|
||
|
|
SND_SOC_DAPM_PGA("Right Speaker Out", WM8978_POWER_MANAGEMENT_3,
|
||
|
|
5, 0, NULL, 0),
|
||
|
|
|
||
|
|
SND_SOC_DAPM_MIXER("OUT4 VMID", WM8978_POWER_MANAGEMENT_3,
|
||
|
|
8, 0, NULL, 0),
|
||
|
|
|
||
|
|
SND_SOC_DAPM_MICBIAS("Mic Bias", WM8978_POWER_MANAGEMENT_1, 4, 0),
|
||
|
|
|
||
|
|
SND_SOC_DAPM_INPUT("LMICN"),
|
||
|
|
SND_SOC_DAPM_INPUT("LMICP"),
|
||
|
|
SND_SOC_DAPM_INPUT("RMICN"),
|
||
|
|
SND_SOC_DAPM_INPUT("RMICP"),
|
||
|
|
SND_SOC_DAPM_INPUT("LAUX"),
|
||
|
|
SND_SOC_DAPM_INPUT("RAUX"),
|
||
|
|
SND_SOC_DAPM_INPUT("L2"),
|
||
|
|
SND_SOC_DAPM_INPUT("R2"),
|
||
|
|
SND_SOC_DAPM_OUTPUT("LHP"),
|
||
|
|
SND_SOC_DAPM_OUTPUT("RHP"),
|
||
|
|
SND_SOC_DAPM_OUTPUT("LSPK"),
|
||
|
|
SND_SOC_DAPM_OUTPUT("RSPK"),
|
||
|
|
};
|
||
|
|
|
||
|
|
static const struct snd_soc_dapm_route wm8978_dapm_routes[] = {
|
||
|
|
/* Output mixer */
|
||
|
|
{"Right Output Mixer", "PCM Playback Switch", "Right DAC"},
|
||
|
|
{"Right Output Mixer", "Aux Playback Switch", "RAUX"},
|
||
|
|
{"Right Output Mixer", "Line Bypass Switch", "Right Boost Mixer"},
|
||
|
|
|
||
|
|
{"Left Output Mixer", "PCM Playback Switch", "Left DAC"},
|
||
|
|
{"Left Output Mixer", "Aux Playback Switch", "LAUX"},
|
||
|
|
{"Left Output Mixer", "Line Bypass Switch", "Left Boost Mixer"},
|
||
|
|
|
||
|
|
/* Outputs */
|
||
|
|
{"Right Headphone Out", NULL, "Right Output Mixer"},
|
||
|
|
{"RHP", NULL, "Right Headphone Out"},
|
||
|
|
|
||
|
|
{"Left Headphone Out", NULL, "Left Output Mixer"},
|
||
|
|
{"LHP", NULL, "Left Headphone Out"},
|
||
|
|
|
||
|
|
{"Right Speaker Out", NULL, "Right Output Mixer"},
|
||
|
|
{"RSPK", NULL, "Right Speaker Out"},
|
||
|
|
|
||
|
|
{"Left Speaker Out", NULL, "Left Output Mixer"},
|
||
|
|
{"LSPK", NULL, "Left Speaker Out"},
|
||
|
|
|
||
|
|
/* Boost Mixer */
|
||
|
|
{"Right ADC", NULL, "Right Boost Mixer"},
|
||
|
|
|
||
|
|
{"Right Boost Mixer", NULL, "RAUX"},
|
||
|
|
{"Right Boost Mixer", NULL, "Right Capture PGA"},
|
||
|
|
{"Right Boost Mixer", NULL, "R2"},
|
||
|
|
|
||
|
|
{"Left ADC", NULL, "Left Boost Mixer"},
|
||
|
|
|
||
|
|
{"Left Boost Mixer", NULL, "LAUX"},
|
||
|
|
{"Left Boost Mixer", NULL, "Left Capture PGA"},
|
||
|
|
{"Left Boost Mixer", NULL, "L2"},
|
||
|
|
|
||
|
|
/* Input PGA */
|
||
|
|
{"Right Capture PGA", NULL, "Right Input Mixer"},
|
||
|
|
{"Left Capture PGA", NULL, "Left Input Mixer"},
|
||
|
|
|
||
|
|
{"Right Input Mixer", "R2 Switch", "R2"},
|
||
|
|
{"Right Input Mixer", "MicN Switch", "RMICN"},
|
||
|
|
{"Right Input Mixer", "MicP Switch", "RMICP"},
|
||
|
|
|
||
|
|
{"Left Input Mixer", "L2 Switch", "L2"},
|
||
|
|
{"Left Input Mixer", "MicN Switch", "LMICN"},
|
||
|
|
{"Left Input Mixer", "MicP Switch", "LMICP"},
|
||
|
|
};
|
||
|
|
|
||
|
|
/* PLL divisors */
|
||
|
|
struct wm8978_pll_div {
|
||
|
|
u32 k;
|
||
|
|
u8 n;
|
||
|
|
u8 div2;
|
||
|
|
};
|
||
|
|
|
||
|
|
#define FIXED_PLL_SIZE (1 << 24)
|
||
|
|
|
||
|
|
static void pll_factors(struct snd_soc_component *component,
|
||
|
|
struct wm8978_pll_div *pll_div, unsigned int target, unsigned int source)
|
||
|
|
{
|
||
|
|
u64 k_part;
|
||
|
|
unsigned int k, n_div, n_mod;
|
||
|
|
|
||
|
|
n_div = target / source;
|
||
|
|
if (n_div < 6) {
|
||
|
|
source >>= 1;
|
||
|
|
pll_div->div2 = 1;
|
||
|
|
n_div = target / source;
|
||
|
|
} else {
|
||
|
|
pll_div->div2 = 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
if (n_div < 6 || n_div > 12)
|
||
|
|
dev_warn(component->dev,
|
||
|
|
"WM8978 N value exceeds recommended range! N = %u\n",
|
||
|
|
n_div);
|
||
|
|
|
||
|
|
pll_div->n = n_div;
|
||
|
|
n_mod = target - source * n_div;
|
||
|
|
k_part = FIXED_PLL_SIZE * (long long)n_mod + source / 2;
|
||
|
|
|
||
|
|
do_div(k_part, source);
|
||
|
|
|
||
|
|
k = k_part & 0xFFFFFFFF;
|
||
|
|
|
||
|
|
pll_div->k = k;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* MCLK dividers */
|
||
|
|
static const int mclk_numerator[] = {1, 3, 2, 3, 4, 6, 8, 12};
|
||
|
|
static const int mclk_denominator[] = {1, 2, 1, 1, 1, 1, 1, 1};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* find index >= idx, such that, for a given f_out,
|
||
|
|
* 3 * f_mclk / 4 <= f_PLLOUT < 13 * f_mclk / 4
|
||
|
|
* f_out can be f_256fs or f_opclk, currently only used for f_256fs. Can be
|
||
|
|
* generalised for f_opclk with suitable coefficient arrays, but currently
|
||
|
|
* the OPCLK divisor is calculated directly, not iteratively.
|
||
|
|
*/
|
||
|
|
static int wm8978_enum_mclk(unsigned int f_out, unsigned int f_mclk,
|
||
|
|
unsigned int *f_pllout)
|
||
|
|
{
|
||
|
|
int i;
|
||
|
|
|
||
|
|
for (i = 0; i < ARRAY_SIZE(mclk_numerator); i++) {
|
||
|
|
unsigned int f_pllout_x4 = 4 * f_out * mclk_numerator[i] /
|
||
|
|
mclk_denominator[i];
|
||
|
|
if (3 * f_mclk <= f_pllout_x4 && f_pllout_x4 < 13 * f_mclk) {
|
||
|
|
*f_pllout = f_pllout_x4 / 4;
|
||
|
|
return i;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Calculate internal frequencies and dividers, according to Figure 40
|
||
|
|
* "PLL and Clock Select Circuit" in WM8978 datasheet Rev. 2.6
|
||
|
|
*/
|
||
|
|
static int wm8978_configure_pll(struct snd_soc_component *component)
|
||
|
|
{
|
||
|
|
struct wm8978_priv *wm8978 = snd_soc_component_get_drvdata(component);
|
||
|
|
struct wm8978_pll_div pll_div;
|
||
|
|
unsigned int f_opclk = wm8978->f_opclk, f_mclk = wm8978->f_mclk,
|
||
|
|
f_256fs = wm8978->f_256fs;
|
||
|
|
unsigned int f2;
|
||
|
|
|
||
|
|
if (!f_mclk)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
if (f_opclk) {
|
||
|
|
unsigned int opclk_div;
|
||
|
|
/* Cannot set up MCLK divider now, do later */
|
||
|
|
wm8978->mclk_idx = -1;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The user needs OPCLK. Choose OPCLKDIV to put
|
||
|
|
* 6 <= R = f2 / f1 < 13, 1 <= OPCLKDIV <= 4.
|
||
|
|
* f_opclk = f_mclk * prescale * R / 4 / OPCLKDIV, where
|
||
|
|
* prescale = 1, or prescale = 2. Prescale is calculated inside
|
||
|
|
* pll_factors(). We have to select f_PLLOUT, such that
|
||
|
|
* f_mclk * 3 / 4 <= f_PLLOUT < f_mclk * 13 / 4. Must be
|
||
|
|
* f_mclk * 3 / 16 <= f_opclk < f_mclk * 13 / 4.
|
||
|
|
*/
|
||
|
|
if (16 * f_opclk < 3 * f_mclk || 4 * f_opclk >= 13 * f_mclk)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
if (4 * f_opclk < 3 * f_mclk)
|
||
|
|
/* Have to use OPCLKDIV */
|
||
|
|
opclk_div = (3 * f_mclk / 4 + f_opclk - 1) / f_opclk;
|
||
|
|
else
|
||
|
|
opclk_div = 1;
|
||
|
|
|
||
|
|
dev_dbg(component->dev, "%s: OPCLKDIV=%d\n", __func__, opclk_div);
|
||
|
|
|
||
|
|
snd_soc_component_update_bits(component, WM8978_GPIO_CONTROL, 0x30,
|
||
|
|
(opclk_div - 1) << 4);
|
||
|
|
|
||
|
|
wm8978->f_pllout = f_opclk * opclk_div;
|
||
|
|
} else if (f_256fs) {
|
||
|
|
/*
|
||
|
|
* Not using OPCLK, but PLL is used for the codec, choose R:
|
||
|
|
* 6 <= R = f2 / f1 < 13, to put 1 <= MCLKDIV <= 12.
|
||
|
|
* f_256fs = f_mclk * prescale * R / 4 / MCLKDIV, where
|
||
|
|
* prescale = 1, or prescale = 2. Prescale is calculated inside
|
||
|
|
* pll_factors(). We have to select f_PLLOUT, such that
|
||
|
|
* f_mclk * 3 / 4 <= f_PLLOUT < f_mclk * 13 / 4. Must be
|
||
|
|
* f_mclk * 3 / 48 <= f_256fs < f_mclk * 13 / 4. This means MCLK
|
||
|
|
* must be 3.781MHz <= f_MCLK <= 32.768MHz
|
||
|
|
*/
|
||
|
|
int idx = wm8978_enum_mclk(f_256fs, f_mclk, &wm8978->f_pllout);
|
||
|
|
if (idx < 0)
|
||
|
|
return idx;
|
||
|
|
|
||
|
|
wm8978->mclk_idx = idx;
|
||
|
|
} else {
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
f2 = wm8978->f_pllout * 4;
|
||
|
|
|
||
|
|
dev_dbg(component->dev, "%s: f_MCLK=%uHz, f_PLLOUT=%uHz\n", __func__,
|
||
|
|
wm8978->f_mclk, wm8978->f_pllout);
|
||
|
|
|
||
|
|
pll_factors(component, &pll_div, f2, wm8978->f_mclk);
|
||
|
|
|
||
|
|
dev_dbg(component->dev, "%s: calculated PLL N=0x%x, K=0x%x, div2=%d\n",
|
||
|
|
__func__, pll_div.n, pll_div.k, pll_div.div2);
|
||
|
|
|
||
|
|
/* Turn PLL off for configuration... */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_POWER_MANAGEMENT_1, 0x20, 0);
|
||
|
|
|
||
|
|
snd_soc_component_write(component, WM8978_PLL_N, (pll_div.div2 << 4) | pll_div.n);
|
||
|
|
snd_soc_component_write(component, WM8978_PLL_K1, pll_div.k >> 18);
|
||
|
|
snd_soc_component_write(component, WM8978_PLL_K2, (pll_div.k >> 9) & 0x1ff);
|
||
|
|
snd_soc_component_write(component, WM8978_PLL_K3, pll_div.k & 0x1ff);
|
||
|
|
|
||
|
|
/* ...and on again */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_POWER_MANAGEMENT_1, 0x20, 0x20);
|
||
|
|
|
||
|
|
if (f_opclk)
|
||
|
|
/* Output PLL (OPCLK) to GPIO1 */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_GPIO_CONTROL, 7, 4);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Configure WM8978 clock dividers.
|
||
|
|
*/
|
||
|
|
static int wm8978_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
|
||
|
|
int div_id, int div)
|
||
|
|
{
|
||
|
|
struct snd_soc_component *component = codec_dai->component;
|
||
|
|
struct wm8978_priv *wm8978 = snd_soc_component_get_drvdata(component);
|
||
|
|
int ret = 0;
|
||
|
|
|
||
|
|
switch (div_id) {
|
||
|
|
case WM8978_OPCLKRATE:
|
||
|
|
wm8978->f_opclk = div;
|
||
|
|
|
||
|
|
if (wm8978->f_mclk)
|
||
|
|
/*
|
||
|
|
* We know the MCLK frequency, the user has requested
|
||
|
|
* OPCLK, configure the PLL based on that and start it
|
||
|
|
* and OPCLK immediately. We will configure PLL to match
|
||
|
|
* user-requested OPCLK frquency as good as possible.
|
||
|
|
* In fact, it is likely, that matching the sampling
|
||
|
|
* rate, when it becomes known, is more important, and
|
||
|
|
* we will not be reconfiguring PLL then, because we
|
||
|
|
* must not interrupt OPCLK. But it should be fine,
|
||
|
|
* because typically the user will request OPCLK to run
|
||
|
|
* at 256fs or 512fs, and for these cases we will also
|
||
|
|
* find an exact MCLK divider configuration - it will
|
||
|
|
* be equal to or double the OPCLK divisor.
|
||
|
|
*/
|
||
|
|
ret = wm8978_configure_pll(component);
|
||
|
|
break;
|
||
|
|
case WM8978_BCLKDIV:
|
||
|
|
if (div & ~0x1c)
|
||
|
|
return -EINVAL;
|
||
|
|
snd_soc_component_update_bits(component, WM8978_CLOCKING, 0x1c, div);
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
dev_dbg(component->dev, "%s: ID %d, value %u\n", __func__, div_id, div);
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* @freq: when .set_pll() us not used, freq is codec MCLK input frequency
|
||
|
|
*/
|
||
|
|
static int wm8978_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id,
|
||
|
|
unsigned int freq, int dir)
|
||
|
|
{
|
||
|
|
struct snd_soc_component *component = codec_dai->component;
|
||
|
|
struct wm8978_priv *wm8978 = snd_soc_component_get_drvdata(component);
|
||
|
|
int ret = 0;
|
||
|
|
|
||
|
|
dev_dbg(component->dev, "%s: ID %d, freq %u\n", __func__, clk_id, freq);
|
||
|
|
|
||
|
|
if (freq) {
|
||
|
|
wm8978->f_mclk = freq;
|
||
|
|
|
||
|
|
/* Even if MCLK is used for system clock, might have to drive OPCLK */
|
||
|
|
if (wm8978->f_opclk)
|
||
|
|
ret = wm8978_configure_pll(component);
|
||
|
|
|
||
|
|
/* Our sysclk is fixed to 256 * fs, will configure in .hw_params() */
|
||
|
|
|
||
|
|
if (!ret)
|
||
|
|
wm8978->sysclk = clk_id;
|
||
|
|
}
|
||
|
|
|
||
|
|
if (wm8978->sysclk == WM8978_PLL && (!freq || clk_id == WM8978_MCLK)) {
|
||
|
|
/* Clock CODEC directly from MCLK */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_CLOCKING, 0x100, 0);
|
||
|
|
|
||
|
|
/* GPIO1 into default mode as input - before configuring PLL */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_GPIO_CONTROL, 7, 0);
|
||
|
|
|
||
|
|
/* Turn off PLL */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_POWER_MANAGEMENT_1, 0x20, 0);
|
||
|
|
wm8978->sysclk = WM8978_MCLK;
|
||
|
|
wm8978->f_pllout = 0;
|
||
|
|
wm8978->f_opclk = 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Set ADC and Voice DAC format.
|
||
|
|
*/
|
||
|
|
static int wm8978_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
|
||
|
|
{
|
||
|
|
struct snd_soc_component *component = codec_dai->component;
|
||
|
|
/*
|
||
|
|
* BCLK polarity mask = 0x100, LRC clock polarity mask = 0x80,
|
||
|
|
* Data Format mask = 0x18: all will be calculated anew
|
||
|
|
*/
|
||
|
|
u16 iface = snd_soc_component_read32(component, WM8978_AUDIO_INTERFACE) & ~0x198;
|
||
|
|
u16 clk = snd_soc_component_read32(component, WM8978_CLOCKING);
|
||
|
|
|
||
|
|
dev_dbg(component->dev, "%s\n", __func__);
|
||
|
|
|
||
|
|
/* set master/slave audio interface */
|
||
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
||
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
||
|
|
clk |= 1;
|
||
|
|
break;
|
||
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
||
|
|
clk &= ~1;
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* interface format */
|
||
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
||
|
|
case SND_SOC_DAIFMT_I2S:
|
||
|
|
iface |= 0x10;
|
||
|
|
break;
|
||
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
||
|
|
break;
|
||
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
||
|
|
iface |= 0x8;
|
||
|
|
break;
|
||
|
|
case SND_SOC_DAIFMT_DSP_A:
|
||
|
|
iface |= 0x18;
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* clock inversion */
|
||
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
||
|
|
case SND_SOC_DAIFMT_NB_NF:
|
||
|
|
break;
|
||
|
|
case SND_SOC_DAIFMT_IB_IF:
|
||
|
|
iface |= 0x180;
|
||
|
|
break;
|
||
|
|
case SND_SOC_DAIFMT_IB_NF:
|
||
|
|
iface |= 0x100;
|
||
|
|
break;
|
||
|
|
case SND_SOC_DAIFMT_NB_IF:
|
||
|
|
iface |= 0x80;
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
snd_soc_component_write(component, WM8978_AUDIO_INTERFACE, iface);
|
||
|
|
snd_soc_component_write(component, WM8978_CLOCKING, clk);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Set PCM DAI bit size and sample rate.
|
||
|
|
*/
|
||
|
|
static int wm8978_hw_params(struct snd_pcm_substream *substream,
|
||
|
|
struct snd_pcm_hw_params *params,
|
||
|
|
struct snd_soc_dai *dai)
|
||
|
|
{
|
||
|
|
struct snd_soc_component *component = dai->component;
|
||
|
|
struct wm8978_priv *wm8978 = snd_soc_component_get_drvdata(component);
|
||
|
|
/* Word length mask = 0x60 */
|
||
|
|
u16 iface_ctl = snd_soc_component_read32(component, WM8978_AUDIO_INTERFACE) & ~0x60;
|
||
|
|
/* Sampling rate mask = 0xe (for filters) */
|
||
|
|
u16 add_ctl = snd_soc_component_read32(component, WM8978_ADDITIONAL_CONTROL) & ~0xe;
|
||
|
|
u16 clking = snd_soc_component_read32(component, WM8978_CLOCKING);
|
||
|
|
enum wm8978_sysclk_src current_clk_id = clking & 0x100 ?
|
||
|
|
WM8978_PLL : WM8978_MCLK;
|
||
|
|
unsigned int f_sel, diff, diff_best = INT_MAX;
|
||
|
|
int i, best = 0;
|
||
|
|
|
||
|
|
if (!wm8978->f_mclk)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
/* bit size */
|
||
|
|
switch (params_width(params)) {
|
||
|
|
case 16:
|
||
|
|
break;
|
||
|
|
case 20:
|
||
|
|
iface_ctl |= 0x20;
|
||
|
|
break;
|
||
|
|
case 24:
|
||
|
|
iface_ctl |= 0x40;
|
||
|
|
break;
|
||
|
|
case 32:
|
||
|
|
iface_ctl |= 0x60;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* filter coefficient */
|
||
|
|
switch (params_rate(params)) {
|
||
|
|
case 8000:
|
||
|
|
add_ctl |= 0x5 << 1;
|
||
|
|
break;
|
||
|
|
case 11025:
|
||
|
|
add_ctl |= 0x4 << 1;
|
||
|
|
break;
|
||
|
|
case 16000:
|
||
|
|
add_ctl |= 0x3 << 1;
|
||
|
|
break;
|
||
|
|
case 22050:
|
||
|
|
add_ctl |= 0x2 << 1;
|
||
|
|
break;
|
||
|
|
case 32000:
|
||
|
|
add_ctl |= 0x1 << 1;
|
||
|
|
break;
|
||
|
|
case 44100:
|
||
|
|
case 48000:
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Sampling rate is known now, can configure the MCLK divider */
|
||
|
|
wm8978->f_256fs = params_rate(params) * 256;
|
||
|
|
|
||
|
|
if (wm8978->sysclk == WM8978_MCLK) {
|
||
|
|
wm8978->mclk_idx = -1;
|
||
|
|
f_sel = wm8978->f_mclk;
|
||
|
|
} else {
|
||
|
|
if (!wm8978->f_opclk) {
|
||
|
|
/* We only enter here, if OPCLK is not used */
|
||
|
|
int ret = wm8978_configure_pll(component);
|
||
|
|
if (ret < 0)
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
f_sel = wm8978->f_pllout;
|
||
|
|
}
|
||
|
|
|
||
|
|
if (wm8978->mclk_idx < 0) {
|
||
|
|
/* Either MCLK is used directly, or OPCLK is used */
|
||
|
|
if (f_sel < wm8978->f_256fs || f_sel > 12 * wm8978->f_256fs)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
for (i = 0; i < ARRAY_SIZE(mclk_numerator); i++) {
|
||
|
|
diff = abs(wm8978->f_256fs * 3 -
|
||
|
|
f_sel * 3 * mclk_denominator[i] / mclk_numerator[i]);
|
||
|
|
|
||
|
|
if (diff < diff_best) {
|
||
|
|
diff_best = diff;
|
||
|
|
best = i;
|
||
|
|
}
|
||
|
|
|
||
|
|
if (!diff)
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
} else {
|
||
|
|
/* OPCLK not used, codec driven by PLL */
|
||
|
|
best = wm8978->mclk_idx;
|
||
|
|
diff = 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
if (diff)
|
||
|
|
dev_warn(component->dev, "Imprecise sampling rate: %uHz%s\n",
|
||
|
|
f_sel * mclk_denominator[best] / mclk_numerator[best] / 256,
|
||
|
|
wm8978->sysclk == WM8978_MCLK ?
|
||
|
|
", consider using PLL" : "");
|
||
|
|
|
||
|
|
dev_dbg(component->dev, "%s: width %d, rate %u, MCLK divisor #%d\n", __func__,
|
||
|
|
params_width(params), params_rate(params), best);
|
||
|
|
|
||
|
|
/* MCLK divisor mask = 0xe0 */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_CLOCKING, 0xe0, best << 5);
|
||
|
|
|
||
|
|
snd_soc_component_write(component, WM8978_AUDIO_INTERFACE, iface_ctl);
|
||
|
|
snd_soc_component_write(component, WM8978_ADDITIONAL_CONTROL, add_ctl);
|
||
|
|
|
||
|
|
if (wm8978->sysclk != current_clk_id) {
|
||
|
|
if (wm8978->sysclk == WM8978_PLL)
|
||
|
|
/* Run CODEC from PLL instead of MCLK */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_CLOCKING,
|
||
|
|
0x100, 0x100);
|
||
|
|
else
|
||
|
|
/* Clock CODEC directly from MCLK */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_CLOCKING, 0x100, 0);
|
||
|
|
}
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int wm8978_mute(struct snd_soc_dai *dai, int mute)
|
||
|
|
{
|
||
|
|
struct snd_soc_component *component = dai->component;
|
||
|
|
|
||
|
|
dev_dbg(component->dev, "%s: %d\n", __func__, mute);
|
||
|
|
|
||
|
|
if (mute)
|
||
|
|
snd_soc_component_update_bits(component, WM8978_DAC_CONTROL, 0x40, 0x40);
|
||
|
|
else
|
||
|
|
snd_soc_component_update_bits(component, WM8978_DAC_CONTROL, 0x40, 0);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int wm8978_set_bias_level(struct snd_soc_component *component,
|
||
|
|
enum snd_soc_bias_level level)
|
||
|
|
{
|
||
|
|
u16 power1 = snd_soc_component_read32(component, WM8978_POWER_MANAGEMENT_1) & ~3;
|
||
|
|
|
||
|
|
switch (level) {
|
||
|
|
case SND_SOC_BIAS_ON:
|
||
|
|
case SND_SOC_BIAS_PREPARE:
|
||
|
|
power1 |= 1; /* VMID 75k */
|
||
|
|
snd_soc_component_write(component, WM8978_POWER_MANAGEMENT_1, power1);
|
||
|
|
break;
|
||
|
|
case SND_SOC_BIAS_STANDBY:
|
||
|
|
/* bit 3: enable bias, bit 2: enable I/O tie off buffer */
|
||
|
|
power1 |= 0xc;
|
||
|
|
|
||
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
|
||
|
|
/* Initial cap charge at VMID 5k */
|
||
|
|
snd_soc_component_write(component, WM8978_POWER_MANAGEMENT_1,
|
||
|
|
power1 | 0x3);
|
||
|
|
mdelay(100);
|
||
|
|
}
|
||
|
|
|
||
|
|
power1 |= 0x2; /* VMID 500k */
|
||
|
|
snd_soc_component_write(component, WM8978_POWER_MANAGEMENT_1, power1);
|
||
|
|
break;
|
||
|
|
case SND_SOC_BIAS_OFF:
|
||
|
|
/* Preserve PLL - OPCLK may be used by someone */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_POWER_MANAGEMENT_1, ~0x20, 0);
|
||
|
|
snd_soc_component_write(component, WM8978_POWER_MANAGEMENT_2, 0);
|
||
|
|
snd_soc_component_write(component, WM8978_POWER_MANAGEMENT_3, 0);
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
dev_dbg(component->dev, "%s: %d, %x\n", __func__, level, power1);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
#define WM8978_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
|
||
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
||
|
|
|
||
|
|
static const struct snd_soc_dai_ops wm8978_dai_ops = {
|
||
|
|
.hw_params = wm8978_hw_params,
|
||
|
|
.digital_mute = wm8978_mute,
|
||
|
|
.set_fmt = wm8978_set_dai_fmt,
|
||
|
|
.set_clkdiv = wm8978_set_dai_clkdiv,
|
||
|
|
.set_sysclk = wm8978_set_dai_sysclk,
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Also supports 12kHz */
|
||
|
|
static struct snd_soc_dai_driver wm8978_dai = {
|
||
|
|
.name = "wm8978-hifi",
|
||
|
|
.playback = {
|
||
|
|
.stream_name = "Playback",
|
||
|
|
.channels_min = 1,
|
||
|
|
.channels_max = 2,
|
||
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
||
|
|
.formats = WM8978_FORMATS,
|
||
|
|
},
|
||
|
|
.capture = {
|
||
|
|
.stream_name = "Capture",
|
||
|
|
.channels_min = 1,
|
||
|
|
.channels_max = 2,
|
||
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
||
|
|
.formats = WM8978_FORMATS,
|
||
|
|
},
|
||
|
|
.ops = &wm8978_dai_ops,
|
||
|
|
.symmetric_rates = 1,
|
||
|
|
};
|
||
|
|
|
||
|
|
static int wm8978_suspend(struct snd_soc_component *component)
|
||
|
|
{
|
||
|
|
struct wm8978_priv *wm8978 = snd_soc_component_get_drvdata(component);
|
||
|
|
|
||
|
|
snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
|
||
|
|
/* Also switch PLL off */
|
||
|
|
snd_soc_component_write(component, WM8978_POWER_MANAGEMENT_1, 0);
|
||
|
|
|
||
|
|
regcache_mark_dirty(wm8978->regmap);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int wm8978_resume(struct snd_soc_component *component)
|
||
|
|
{
|
||
|
|
struct wm8978_priv *wm8978 = snd_soc_component_get_drvdata(component);
|
||
|
|
|
||
|
|
/* Sync reg_cache with the hardware */
|
||
|
|
regcache_sync(wm8978->regmap);
|
||
|
|
|
||
|
|
snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY);
|
||
|
|
|
||
|
|
if (wm8978->f_pllout)
|
||
|
|
/* Switch PLL on */
|
||
|
|
snd_soc_component_update_bits(component, WM8978_POWER_MANAGEMENT_1, 0x20, 0x20);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* These registers contain an "update" bit - bit 8. This means, for example,
|
||
|
|
* that one can write new DAC digital volume for both channels, but only when
|
||
|
|
* the update bit is set, will also the volume be updated - simultaneously for
|
||
|
|
* both channels.
|
||
|
|
*/
|
||
|
|
static const int update_reg[] = {
|
||
|
|
WM8978_LEFT_DAC_DIGITAL_VOLUME,
|
||
|
|
WM8978_RIGHT_DAC_DIGITAL_VOLUME,
|
||
|
|
WM8978_LEFT_ADC_DIGITAL_VOLUME,
|
||
|
|
WM8978_RIGHT_ADC_DIGITAL_VOLUME,
|
||
|
|
WM8978_LEFT_INP_PGA_CONTROL,
|
||
|
|
WM8978_RIGHT_INP_PGA_CONTROL,
|
||
|
|
WM8978_LOUT1_HP_CONTROL,
|
||
|
|
WM8978_ROUT1_HP_CONTROL,
|
||
|
|
WM8978_LOUT2_SPK_CONTROL,
|
||
|
|
WM8978_ROUT2_SPK_CONTROL,
|
||
|
|
};
|
||
|
|
|
||
|
|
static int wm8978_probe(struct snd_soc_component *component)
|
||
|
|
{
|
||
|
|
struct wm8978_priv *wm8978 = snd_soc_component_get_drvdata(component);
|
||
|
|
int i;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Set default system clock to PLL, it is more precise, this is also the
|
||
|
|
* default hardware setting
|
||
|
|
*/
|
||
|
|
wm8978->sysclk = WM8978_PLL;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Set the update bit in all registers, that have one. This way all
|
||
|
|
* writes to those registers will also cause the update bit to be
|
||
|
|
* written.
|
||
|
|
*/
|
||
|
|
for (i = 0; i < ARRAY_SIZE(update_reg); i++)
|
||
|
|
snd_soc_component_update_bits(component, update_reg[i], 0x100, 0x100);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct snd_soc_component_driver soc_component_dev_wm8978 = {
|
||
|
|
.probe = wm8978_probe,
|
||
|
|
.suspend = wm8978_suspend,
|
||
|
|
.resume = wm8978_resume,
|
||
|
|
.set_bias_level = wm8978_set_bias_level,
|
||
|
|
.controls = wm8978_snd_controls,
|
||
|
|
.num_controls = ARRAY_SIZE(wm8978_snd_controls),
|
||
|
|
.dapm_widgets = wm8978_dapm_widgets,
|
||
|
|
.num_dapm_widgets = ARRAY_SIZE(wm8978_dapm_widgets),
|
||
|
|
.dapm_routes = wm8978_dapm_routes,
|
||
|
|
.num_dapm_routes = ARRAY_SIZE(wm8978_dapm_routes),
|
||
|
|
.idle_bias_on = 1,
|
||
|
|
.use_pmdown_time = 1,
|
||
|
|
.endianness = 1,
|
||
|
|
.non_legacy_dai_naming = 1,
|
||
|
|
};
|
||
|
|
|
||
|
|
static const struct regmap_config wm8978_regmap_config = {
|
||
|
|
.reg_bits = 7,
|
||
|
|
.val_bits = 9,
|
||
|
|
|
||
|
|
.max_register = WM8978_MAX_REGISTER,
|
||
|
|
.volatile_reg = wm8978_volatile,
|
||
|
|
|
||
|
|
.cache_type = REGCACHE_RBTREE,
|
||
|
|
.reg_defaults = wm8978_reg_defaults,
|
||
|
|
.num_reg_defaults = ARRAY_SIZE(wm8978_reg_defaults),
|
||
|
|
};
|
||
|
|
|
||
|
|
static int wm8978_i2c_probe(struct i2c_client *i2c,
|
||
|
|
const struct i2c_device_id *id)
|
||
|
|
{
|
||
|
|
struct wm8978_priv *wm8978;
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
wm8978 = devm_kzalloc(&i2c->dev, sizeof(struct wm8978_priv),
|
||
|
|
GFP_KERNEL);
|
||
|
|
if (wm8978 == NULL)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
wm8978->regmap = devm_regmap_init_i2c(i2c, &wm8978_regmap_config);
|
||
|
|
if (IS_ERR(wm8978->regmap)) {
|
||
|
|
ret = PTR_ERR(wm8978->regmap);
|
||
|
|
dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
i2c_set_clientdata(i2c, wm8978);
|
||
|
|
|
||
|
|
/* Reset the codec */
|
||
|
|
ret = regmap_write(wm8978->regmap, WM8978_RESET, 0);
|
||
|
|
if (ret != 0) {
|
||
|
|
dev_err(&i2c->dev, "Failed to issue reset: %d\n", ret);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
ret = devm_snd_soc_register_component(&i2c->dev,
|
||
|
|
&soc_component_dev_wm8978, &wm8978_dai, 1);
|
||
|
|
if (ret != 0) {
|
||
|
|
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct i2c_device_id wm8978_i2c_id[] = {
|
||
|
|
{ "wm8978", 0 },
|
||
|
|
{ }
|
||
|
|
};
|
||
|
|
MODULE_DEVICE_TABLE(i2c, wm8978_i2c_id);
|
||
|
|
|
||
|
|
static const struct of_device_id wm8978_of_match[] = {
|
||
|
|
{ .compatible = "wlf,wm8978", },
|
||
|
|
{ }
|
||
|
|
};
|
||
|
|
MODULE_DEVICE_TABLE(of, wm8978_of_match);
|
||
|
|
|
||
|
|
static struct i2c_driver wm8978_i2c_driver = {
|
||
|
|
.driver = {
|
||
|
|
.name = "wm8978",
|
||
|
|
.of_match_table = wm8978_of_match,
|
||
|
|
},
|
||
|
|
.probe = wm8978_i2c_probe,
|
||
|
|
.id_table = wm8978_i2c_id,
|
||
|
|
};
|
||
|
|
|
||
|
|
module_i2c_driver(wm8978_i2c_driver);
|
||
|
|
|
||
|
|
MODULE_DESCRIPTION("ASoC WM8978 codec driver");
|
||
|
|
MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
|
||
|
|
MODULE_LICENSE("GPL");
|