linux/linux-5.4.31/drivers/mfd/max77620.c

706 lines
19 KiB
C
Raw Normal View History

2024-01-30 10:43:28 +00:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* Maxim MAX77620 MFD Driver
*
* Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Laxman Dewangan <ldewangan@nvidia.com>
* Chaitanya Bandi <bandik@nvidia.com>
* Mallikarjun Kasoju <mkasoju@nvidia.com>
*/
/****************** Teminology used in driver ********************
* Here are some terminology used from datasheet for quick reference:
* Flexible Power Sequence (FPS):
* The Flexible Power Sequencer (FPS) allows each regulator to power up under
* hardware or software control. Additionally, each regulator can power on
* independently or among a group of other regulators with an adjustable
* power-up and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can
* be programmed to be part of a sequence allowing external regulators to be
* sequenced along with internal regulators. 32KHz clock can be programmed to
* be part of a sequence.
* There is 3 FPS confguration registers and all resources are configured to
* any of these FPS or no FPS.
*/
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
#include <linux/mfd/max77620.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
static struct max77620_chip *max77620_scratch;
static const struct resource gpio_resources[] = {
DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO),
};
static const struct resource power_resources[] = {
DEFINE_RES_IRQ(MAX77620_IRQ_LBT_MBATLOW),
};
static const struct resource rtc_resources[] = {
DEFINE_RES_IRQ(MAX77620_IRQ_TOP_RTC),
};
static const struct resource thermal_resources[] = {
DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM1),
DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM2),
};
static const struct regmap_irq max77620_top_irqs[] = {
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GLBL, 0, MAX77620_IRQ_TOP_GLBL_MASK),
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_SD, 0, MAX77620_IRQ_TOP_SD_MASK),
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_LDO, 0, MAX77620_IRQ_TOP_LDO_MASK),
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GPIO, 0, MAX77620_IRQ_TOP_GPIO_MASK),
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_RTC, 0, MAX77620_IRQ_TOP_RTC_MASK),
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_32K, 0, MAX77620_IRQ_TOP_32K_MASK),
REGMAP_IRQ_REG(MAX77620_IRQ_TOP_ONOFF, 0, MAX77620_IRQ_TOP_ONOFF_MASK),
REGMAP_IRQ_REG(MAX77620_IRQ_LBT_MBATLOW, 1, MAX77620_IRQ_LBM_MASK),
REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM1, 1, MAX77620_IRQ_TJALRM1_MASK),
REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM2, 1, MAX77620_IRQ_TJALRM2_MASK),
};
static const struct mfd_cell max77620_children[] = {
{ .name = "max77620-pinctrl", },
{ .name = "max77620-clock", },
{ .name = "max77620-pmic", },
{ .name = "max77620-watchdog", },
{
.name = "max77620-gpio",
.resources = gpio_resources,
.num_resources = ARRAY_SIZE(gpio_resources),
}, {
.name = "max77620-rtc",
.resources = rtc_resources,
.num_resources = ARRAY_SIZE(rtc_resources),
}, {
.name = "max77620-power",
.resources = power_resources,
.num_resources = ARRAY_SIZE(power_resources),
}, {
.name = "max77620-thermal",
.resources = thermal_resources,
.num_resources = ARRAY_SIZE(thermal_resources),
},
};
static const struct mfd_cell max20024_children[] = {
{ .name = "max20024-pinctrl", },
{ .name = "max77620-clock", },
{ .name = "max20024-pmic", },
{ .name = "max77620-watchdog", },
{
.name = "max77620-gpio",
.resources = gpio_resources,
.num_resources = ARRAY_SIZE(gpio_resources),
}, {
.name = "max77620-rtc",
.resources = rtc_resources,
.num_resources = ARRAY_SIZE(rtc_resources),
}, {
.name = "max20024-power",
.resources = power_resources,
.num_resources = ARRAY_SIZE(power_resources),
},
};
static const struct mfd_cell max77663_children[] = {
{ .name = "max77620-pinctrl", },
{ .name = "max77620-clock", },
{ .name = "max77663-pmic", },
{ .name = "max77620-watchdog", },
{
.name = "max77620-gpio",
.resources = gpio_resources,
.num_resources = ARRAY_SIZE(gpio_resources),
}, {
.name = "max77620-rtc",
.resources = rtc_resources,
.num_resources = ARRAY_SIZE(rtc_resources),
}, {
.name = "max77663-power",
.resources = power_resources,
.num_resources = ARRAY_SIZE(power_resources),
},
};
static const struct regmap_range max77620_readable_ranges[] = {
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
};
static const struct regmap_access_table max77620_readable_table = {
.yes_ranges = max77620_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(max77620_readable_ranges),
};
static const struct regmap_range max20024_readable_ranges[] = {
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
regmap_reg_range(MAX20024_REG_MAX_ADD, MAX20024_REG_MAX_ADD),
};
static const struct regmap_access_table max20024_readable_table = {
.yes_ranges = max20024_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(max20024_readable_ranges),
};
static const struct regmap_range max77620_writable_ranges[] = {
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
};
static const struct regmap_access_table max77620_writable_table = {
.yes_ranges = max77620_writable_ranges,
.n_yes_ranges = ARRAY_SIZE(max77620_writable_ranges),
};
static const struct regmap_range max77620_cacheable_ranges[] = {
regmap_reg_range(MAX77620_REG_SD0_CFG, MAX77620_REG_LDO_CFG3),
regmap_reg_range(MAX77620_REG_FPS_CFG0, MAX77620_REG_FPS_SD3),
};
static const struct regmap_access_table max77620_volatile_table = {
.no_ranges = max77620_cacheable_ranges,
.n_no_ranges = ARRAY_SIZE(max77620_cacheable_ranges),
};
static const struct regmap_config max77620_regmap_config = {
.name = "power-slave",
.reg_bits = 8,
.val_bits = 8,
.max_register = MAX77620_REG_DVSSD4 + 1,
.cache_type = REGCACHE_RBTREE,
.rd_table = &max77620_readable_table,
.wr_table = &max77620_writable_table,
.volatile_table = &max77620_volatile_table,
};
static const struct regmap_config max20024_regmap_config = {
.name = "power-slave",
.reg_bits = 8,
.val_bits = 8,
.max_register = MAX20024_REG_MAX_ADD + 1,
.cache_type = REGCACHE_RBTREE,
.rd_table = &max20024_readable_table,
.wr_table = &max77620_writable_table,
.volatile_table = &max77620_volatile_table,
};
static const struct regmap_range max77663_readable_ranges[] = {
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
};
static const struct regmap_access_table max77663_readable_table = {
.yes_ranges = max77663_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(max77663_readable_ranges),
};
static const struct regmap_range max77663_writable_ranges[] = {
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
};
static const struct regmap_access_table max77663_writable_table = {
.yes_ranges = max77663_writable_ranges,
.n_yes_ranges = ARRAY_SIZE(max77663_writable_ranges),
};
static const struct regmap_config max77663_regmap_config = {
.name = "power-slave",
.reg_bits = 8,
.val_bits = 8,
.max_register = MAX77620_REG_CID5 + 1,
.cache_type = REGCACHE_RBTREE,
.rd_table = &max77663_readable_table,
.wr_table = &max77663_writable_table,
.volatile_table = &max77620_volatile_table,
};
/*
* MAX77620 and MAX20024 has the following steps of the interrupt handling
* for TOP interrupts:
* 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM.
* 2. Read IRQTOP and service the interrupt.
* 3. Once all interrupts has been checked and serviced, the interrupt service
* routine un-masks the hardware interrupt line by clearing GLBLM.
*/
static int max77620_irq_global_mask(void *irq_drv_data)
{
struct max77620_chip *chip = irq_drv_data;
int ret;
ret = regmap_update_bits(chip->rmap, MAX77620_REG_INTENLBT,
MAX77620_GLBLM_MASK, MAX77620_GLBLM_MASK);
if (ret < 0)
dev_err(chip->dev, "Failed to set GLBLM: %d\n", ret);
return ret;
}
static int max77620_irq_global_unmask(void *irq_drv_data)
{
struct max77620_chip *chip = irq_drv_data;
int ret;
ret = regmap_update_bits(chip->rmap, MAX77620_REG_INTENLBT,
MAX77620_GLBLM_MASK, 0);
if (ret < 0)
dev_err(chip->dev, "Failed to reset GLBLM: %d\n", ret);
return ret;
}
static struct regmap_irq_chip max77620_top_irq_chip = {
.name = "max77620-top",
.irqs = max77620_top_irqs,
.num_irqs = ARRAY_SIZE(max77620_top_irqs),
.num_regs = 2,
.status_base = MAX77620_REG_IRQTOP,
.mask_base = MAX77620_REG_IRQTOPM,
.handle_pre_irq = max77620_irq_global_mask,
.handle_post_irq = max77620_irq_global_unmask,
};
/* max77620_get_fps_period_reg_value: Get FPS bit field value from
* requested periods.
* MAX77620 supports the FPS period of 40, 80, 160, 320, 540, 1280, 2560
* and 5120 microseconds. MAX20024 supports the FPS period of 20, 40, 80,
* 160, 320, 540, 1280 and 2560 microseconds.
* The FPS register has 3 bits field to set the FPS period as
* bits max77620 max20024
* 000 40 20
* 001 80 40
* :::
*/
static int max77620_get_fps_period_reg_value(struct max77620_chip *chip,
int tperiod)
{
int fps_min_period;
int i;
switch (chip->chip_id) {
case MAX20024:
fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
break;
case MAX77620:
fps_min_period = MAX77620_FPS_PERIOD_MIN_US;
break;
case MAX77663:
fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
break;
default:
return -EINVAL;
}
for (i = 0; i < 7; i++) {
if (fps_min_period >= tperiod)
return i;
fps_min_period *= 2;
}
return i;
}
/* max77620_config_fps: Configure FPS configuration registers
* based on platform specific information.
*/
static int max77620_config_fps(struct max77620_chip *chip,
struct device_node *fps_np)
{
struct device *dev = chip->dev;
unsigned int mask = 0, config = 0;
u32 fps_max_period;
u32 param_val;
int tperiod, fps_id;
int ret;
char fps_name[10];
switch (chip->chip_id) {
case MAX20024:
fps_max_period = MAX20024_FPS_PERIOD_MAX_US;
break;
case MAX77620:
fps_max_period = MAX77620_FPS_PERIOD_MAX_US;
break;
case MAX77663:
fps_max_period = MAX20024_FPS_PERIOD_MAX_US;
break;
default:
return -EINVAL;
}
for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
sprintf(fps_name, "fps%d", fps_id);
if (of_node_name_eq(fps_np, fps_name))
break;
}
if (fps_id == MAX77620_FPS_COUNT) {
dev_err(dev, "FPS node name %pOFn is not valid\n", fps_np);
return -EINVAL;
}
ret = of_property_read_u32(fps_np, "maxim,shutdown-fps-time-period-us",
&param_val);
if (!ret) {
mask |= MAX77620_FPS_TIME_PERIOD_MASK;
chip->shutdown_fps_period[fps_id] = min(param_val,
fps_max_period);
tperiod = max77620_get_fps_period_reg_value(chip,
chip->shutdown_fps_period[fps_id]);
config |= tperiod << MAX77620_FPS_TIME_PERIOD_SHIFT;
}
ret = of_property_read_u32(fps_np, "maxim,suspend-fps-time-period-us",
&param_val);
if (!ret)
chip->suspend_fps_period[fps_id] = min(param_val,
fps_max_period);
ret = of_property_read_u32(fps_np, "maxim,fps-event-source",
&param_val);
if (!ret) {
if (param_val > 2) {
dev_err(dev, "FPS%d event-source invalid\n", fps_id);
return -EINVAL;
}
mask |= MAX77620_FPS_EN_SRC_MASK;
config |= param_val << MAX77620_FPS_EN_SRC_SHIFT;
if (param_val == 2) {
mask |= MAX77620_FPS_ENFPS_SW_MASK;
config |= MAX77620_FPS_ENFPS_SW;
}
}
if (!chip->sleep_enable && !chip->enable_global_lpm) {
ret = of_property_read_u32(fps_np,
"maxim,device-state-on-disabled-event",
&param_val);
if (!ret) {
if (param_val == 0)
chip->sleep_enable = true;
else if (param_val == 1)
chip->enable_global_lpm = true;
}
}
ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id,
mask, config);
if (ret < 0) {
dev_err(dev, "Failed to update FPS CFG: %d\n", ret);
return ret;
}
return 0;
}
static int max77620_initialise_fps(struct max77620_chip *chip)
{
struct device *dev = chip->dev;
struct device_node *fps_np, *fps_child;
u8 config;
int fps_id;
int ret;
for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) {
chip->shutdown_fps_period[fps_id] = -1;
chip->suspend_fps_period[fps_id] = -1;
}
fps_np = of_get_child_by_name(dev->of_node, "fps");
if (!fps_np)
goto skip_fps;
for_each_child_of_node(fps_np, fps_child) {
ret = max77620_config_fps(chip, fps_child);
if (ret < 0) {
of_node_put(fps_child);
return ret;
}
}
config = chip->enable_global_lpm ? MAX77620_ONOFFCNFG2_SLP_LPM_MSK : 0;
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
MAX77620_ONOFFCNFG2_SLP_LPM_MSK, config);
if (ret < 0) {
dev_err(dev, "Failed to update SLP_LPM: %d\n", ret);
return ret;
}
skip_fps:
if (chip->chip_id == MAX77663)
return 0;
/* Enable wake on EN0 pin */
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
MAX77620_ONOFFCNFG2_WK_EN0,
MAX77620_ONOFFCNFG2_WK_EN0);
if (ret < 0) {
dev_err(dev, "Failed to update WK_EN0: %d\n", ret);
return ret;
}
/* For MAX20024, SLPEN will be POR reset if CLRSE is b11 */
if ((chip->chip_id == MAX20024) && chip->sleep_enable) {
config = MAX77620_ONOFFCNFG1_SLPEN | MAX20024_ONOFFCNFG1_CLRSE;
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
config, config);
if (ret < 0) {
dev_err(dev, "Failed to update SLPEN: %d\n", ret);
return ret;
}
}
return 0;
}
static int max77620_read_es_version(struct max77620_chip *chip)
{
unsigned int val;
u8 cid_val[6];
int i;
int ret;
for (i = MAX77620_REG_CID0; i <= MAX77620_REG_CID5; i++) {
ret = regmap_read(chip->rmap, i, &val);
if (ret < 0) {
dev_err(chip->dev, "Failed to read CID: %d\n", ret);
return ret;
}
dev_dbg(chip->dev, "CID%d: 0x%02x\n",
i - MAX77620_REG_CID0, val);
cid_val[i - MAX77620_REG_CID0] = val;
}
/* CID4 is OTP Version and CID5 is ES version */
dev_info(chip->dev, "PMIC Version OTP:0x%02X and ES:0x%X\n",
cid_val[4], MAX77620_CID5_DIDM(cid_val[5]));
return ret;
}
static void max77620_pm_power_off(void)
{
struct max77620_chip *chip = max77620_scratch;
regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
MAX77620_ONOFFCNFG1_SFT_RST,
MAX77620_ONOFFCNFG1_SFT_RST);
}
static int max77620_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct regmap_config *rmap_config;
struct max77620_chip *chip;
const struct mfd_cell *mfd_cells;
int n_mfd_cells;
bool pm_off;
int ret;
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
i2c_set_clientdata(client, chip);
chip->dev = &client->dev;
chip->irq_base = -1;
chip->chip_irq = client->irq;
chip->chip_id = (enum max77620_chip_id)id->driver_data;
switch (chip->chip_id) {
case MAX77620:
mfd_cells = max77620_children;
n_mfd_cells = ARRAY_SIZE(max77620_children);
rmap_config = &max77620_regmap_config;
break;
case MAX20024:
mfd_cells = max20024_children;
n_mfd_cells = ARRAY_SIZE(max20024_children);
rmap_config = &max20024_regmap_config;
break;
case MAX77663:
mfd_cells = max77663_children;
n_mfd_cells = ARRAY_SIZE(max77663_children);
rmap_config = &max77663_regmap_config;
break;
default:
dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id);
return -EINVAL;
}
chip->rmap = devm_regmap_init_i2c(client, rmap_config);
if (IS_ERR(chip->rmap)) {
ret = PTR_ERR(chip->rmap);
dev_err(chip->dev, "Failed to initialise regmap: %d\n", ret);
return ret;
}
ret = max77620_read_es_version(chip);
if (ret < 0)
return ret;
max77620_top_irq_chip.irq_drv_data = chip;
ret = devm_regmap_add_irq_chip(chip->dev, chip->rmap, client->irq,
IRQF_ONESHOT | IRQF_SHARED,
chip->irq_base, &max77620_top_irq_chip,
&chip->top_irq_data);
if (ret < 0) {
dev_err(chip->dev, "Failed to add regmap irq: %d\n", ret);
return ret;
}
ret = max77620_initialise_fps(chip);
if (ret < 0)
return ret;
ret = devm_mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE,
mfd_cells, n_mfd_cells, NULL, 0,
regmap_irq_get_domain(chip->top_irq_data));
if (ret < 0) {
dev_err(chip->dev, "Failed to add MFD children: %d\n", ret);
return ret;
}
pm_off = of_device_is_system_power_controller(client->dev.of_node);
if (pm_off && !pm_power_off) {
max77620_scratch = chip;
pm_power_off = max77620_pm_power_off;
}
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int max77620_set_fps_period(struct max77620_chip *chip,
int fps_id, int time_period)
{
int period = max77620_get_fps_period_reg_value(chip, time_period);
int ret;
ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id,
MAX77620_FPS_TIME_PERIOD_MASK,
period << MAX77620_FPS_TIME_PERIOD_SHIFT);
if (ret < 0) {
dev_err(chip->dev, "Failed to update FPS period: %d\n", ret);
return ret;
}
return 0;
}
static int max77620_i2c_suspend(struct device *dev)
{
struct max77620_chip *chip = dev_get_drvdata(dev);
struct i2c_client *client = to_i2c_client(dev);
unsigned int config;
int fps;
int ret;
for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) {
if (chip->suspend_fps_period[fps] < 0)
continue;
ret = max77620_set_fps_period(chip, fps,
chip->suspend_fps_period[fps]);
if (ret < 0)
return ret;
}
/*
* For MAX20024: No need to configure SLPEN on suspend as
* it will be configured on Init.
*/
if (chip->chip_id == MAX20024)
goto out;
config = (chip->sleep_enable) ? MAX77620_ONOFFCNFG1_SLPEN : 0;
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
MAX77620_ONOFFCNFG1_SLPEN,
config);
if (ret < 0) {
dev_err(dev, "Failed to configure sleep in suspend: %d\n", ret);
return ret;
}
if (chip->chip_id == MAX77663)
goto out;
/* Disable WK_EN0 */
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
MAX77620_ONOFFCNFG2_WK_EN0, 0);
if (ret < 0) {
dev_err(dev, "Failed to configure WK_EN in suspend: %d\n", ret);
return ret;
}
out:
disable_irq(client->irq);
return 0;
}
static int max77620_i2c_resume(struct device *dev)
{
struct max77620_chip *chip = dev_get_drvdata(dev);
struct i2c_client *client = to_i2c_client(dev);
int ret;
int fps;
for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) {
if (chip->shutdown_fps_period[fps] < 0)
continue;
ret = max77620_set_fps_period(chip, fps,
chip->shutdown_fps_period[fps]);
if (ret < 0)
return ret;
}
/*
* For MAX20024: No need to configure WKEN0 on resume as
* it is configured on Init.
*/
if (chip->chip_id == MAX20024 || chip->chip_id == MAX77663)
goto out;
/* Enable WK_EN0 */
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
MAX77620_ONOFFCNFG2_WK_EN0,
MAX77620_ONOFFCNFG2_WK_EN0);
if (ret < 0) {
dev_err(dev, "Failed to configure WK_EN0 n resume: %d\n", ret);
return ret;
}
out:
enable_irq(client->irq);
return 0;
}
#endif
static const struct i2c_device_id max77620_id[] = {
{"max77620", MAX77620},
{"max20024", MAX20024},
{"max77663", MAX77663},
{},
};
static const struct dev_pm_ops max77620_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(max77620_i2c_suspend, max77620_i2c_resume)
};
static struct i2c_driver max77620_driver = {
.driver = {
.name = "max77620",
.pm = &max77620_pm_ops,
},
.probe = max77620_probe,
.id_table = max77620_id,
};
builtin_i2c_driver(max77620_driver);