linux/linux-5.4.31/arch/x86/kernel/apic/probe_32.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Default generic APIC driver. This handles up to 8 CPUs.
 *
 * Copyright 2003 Andi Kleen, SuSE Labs.
 *
 * Generic x86 APIC driver probe layer.
 */
#include <linux/export.h>
#include <linux/errno.h>
#include <linux/smp.h>

#include <asm/apic.h>
#include <asm/acpi.h>

#include "local.h"

static int default_x86_32_early_logical_apicid(int cpu)
{
	return 1 << cpu;
}

static void setup_apic_flat_routing(void)
{
#ifdef CONFIG_X86_IO_APIC
	printk(KERN_INFO
		"Enabling APIC mode:  Flat.  Using %d I/O APICs\n",
		nr_ioapics);
#endif
}

static int default_apic_id_registered(void)
{
	return physid_isset(read_apic_id(), phys_cpu_present_map);
}

/*
 * Set up the logical destination ID.  Intel recommends to set DFR, LDR and
 * TPR before enabling an APIC.  See e.g. "AP-388 82489DX User's Manual"
 * (Intel document number 292116).
 */
static void default_init_apic_ldr(void)
{
	unsigned long val;

	apic_write(APIC_DFR, APIC_DFR_VALUE);
	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
	apic_write(APIC_LDR, val);
}

static int default_phys_pkg_id(int cpuid_apic, int index_msb)
{
	return cpuid_apic >> index_msb;
}

/* should be called last. */
static int probe_default(void)
{
	return 1;
}

static struct apic apic_default __ro_after_init = {

	.name				= "default",
	.probe				= probe_default,
	.acpi_madt_oem_check		= NULL,
	.apic_id_valid			= default_apic_id_valid,
	.apic_id_registered		= default_apic_id_registered,

	.irq_delivery_mode		= dest_Fixed,
	/* logical delivery broadcast to all CPUs: */
	.irq_dest_mode			= 1,

	.disable_esr			= 0,
	.dest_logical			= APIC_DEST_LOGICAL,
	.check_apicid_used		= default_check_apicid_used,

	.init_apic_ldr			= default_init_apic_ldr,

	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
	.setup_apic_routing		= setup_apic_flat_routing,
	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
	.apicid_to_cpu_present		= physid_set_mask_of_physid,
	.check_phys_apicid_present	= default_check_phys_apicid_present,
	.phys_pkg_id			= default_phys_pkg_id,

	.get_apic_id			= default_get_apic_id,
	.set_apic_id			= NULL,

	.calc_dest_apicid		= apic_flat_calc_apicid,

	.send_IPI			= default_send_IPI_single,
	.send_IPI_mask			= default_send_IPI_mask_logical,
	.send_IPI_mask_allbutself	= default_send_IPI_mask_allbutself_logical,
	.send_IPI_allbutself		= default_send_IPI_allbutself,
	.send_IPI_all			= default_send_IPI_all,
	.send_IPI_self			= default_send_IPI_self,

	.inquire_remote_apic		= default_inquire_remote_apic,

	.read				= native_apic_mem_read,
	.write				= native_apic_mem_write,
	.eoi_write			= native_apic_mem_write,
	.icr_read			= native_apic_icr_read,
	.icr_write			= native_apic_icr_write,
	.wait_icr_idle			= native_apic_wait_icr_idle,
	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,

	.x86_32_early_logical_apicid	= default_x86_32_early_logical_apicid,
};

apic_driver(apic_default);

struct apic *apic __ro_after_init = &apic_default;
EXPORT_SYMBOL_GPL(apic);

static int cmdline_apic __initdata;
static int __init parse_apic(char *arg)
{
	struct apic **drv;

	if (!arg)
		return -EINVAL;

	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
		if (!strcmp((*drv)->name, arg)) {
			apic = *drv;
			cmdline_apic = 1;
			return 0;
		}
	}

	/* Parsed again by __setup for debug/verbose */
	return 0;
}
early_param("apic", parse_apic);

void __init default_setup_apic_routing(void)
{
	int version = boot_cpu_apic_version;

	if (num_possible_cpus() > 8) {
		switch (boot_cpu_data.x86_vendor) {
		case X86_VENDOR_INTEL:
			if (!APIC_XAPIC(version)) {
				def_to_bigsmp = 0;
				break;
			}
			/* P4 and above */
			/* fall through */
		case X86_VENDOR_HYGON:
		case X86_VENDOR_AMD:
			def_to_bigsmp = 1;
		}
	}

#ifdef CONFIG_X86_BIGSMP
	/*
	 * This is used to switch to bigsmp mode when
	 * - There is no apic= option specified by the user
	 * - generic_apic_probe() has chosen apic_default as the sub_arch
	 * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
	 */

	if (!cmdline_apic && apic == &apic_default)
		generic_bigsmp_probe();
#endif

	if (apic->setup_apic_routing)
		apic->setup_apic_routing();

	if (x86_platform.apic_post_init)
		x86_platform.apic_post_init();
}

void __init generic_apic_probe(void)
{
	if (!cmdline_apic) {
		struct apic **drv;

		for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
			if ((*drv)->probe()) {
				apic = *drv;
				break;
			}
		}
		/* Not visible without early console */
		if (drv == __apicdrivers_end)
			panic("Didn't find an APIC driver");
	}
	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
}

/* This function can switch the APIC even after the initial ->probe() */
int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
	struct apic **drv;

	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
		if (!(*drv)->acpi_madt_oem_check)
			continue;
		if (!(*drv)->acpi_madt_oem_check(oem_id, oem_table_id))
			continue;

		if (!cmdline_apic) {
			apic = *drv;
			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
			       apic->name);
		}
		return 1;
	}
	return 0;
}