72 lines
2.2 KiB
Plaintext
72 lines
2.2 KiB
Plaintext
|
Binding for Maxim MAX77686 regulators
|
||
|
|
|
||
|
|
This is a part of the device tree bindings of MAX77686 multi-function device.
|
||
|
|
More information can be found in ../mfd/max77686.txt file.
|
||
|
|
|
||
|
|
The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO)
|
||
|
|
regulators that can be controlled over I2C.
|
||
|
|
|
||
|
|
Following properties should be present in main device node of the MFD chip.
|
||
|
|
|
||
|
|
Optional node:
|
||
|
|
- voltage-regulators : The regulators of max77686 have to be instantiated
|
||
|
|
under subnode named "voltage-regulators" using the following format.
|
||
|
|
|
||
|
|
regulator_name {
|
||
|
|
regulator-compatible = LDOn/BUCKn
|
||
|
|
standard regulator constraints....
|
||
|
|
};
|
||
|
|
refer Documentation/devicetree/bindings/regulator/regulator.txt
|
||
|
|
|
||
|
|
The regulator node's name should be initialized with a string
|
||
|
|
to get matched with their hardware counterparts as follow:
|
||
|
|
|
||
|
|
-LDOn : for LDOs, where n can lie in range 1 to 26.
|
||
|
|
example: LDO1, LDO2, LDO26.
|
||
|
|
-BUCKn : for BUCKs, where n can lie in range 1 to 9.
|
||
|
|
example: BUCK1, BUCK5, BUCK9.
|
||
|
|
|
||
|
|
Regulators which can be turned off during system suspend:
|
||
|
|
-LDOn : 2, 6-8, 10-12, 14-16,
|
||
|
|
-BUCKn : 1-4.
|
||
|
|
Use standard regulator bindings for it ('regulator-off-in-suspend').
|
||
|
|
|
||
|
|
LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
|
||
|
|
control. To turn this feature on this property must be added to the regulator
|
||
|
|
sub-node:
|
||
|
|
- maxim,ena-gpios : one GPIO specifier enable control (the gpio
|
||
|
|
flags are actually ignored and always
|
||
|
|
ACTIVE_HIGH is used)
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
max77686: pmic@9 {
|
||
|
|
compatible = "maxim,max77686";
|
||
|
|
interrupt-parent = <&wakeup_eint>;
|
||
|
|
interrupts = <26 IRQ_TYPE_NONE>;
|
||
|
|
reg = <0x09>;
|
||
|
|
|
||
|
|
voltage-regulators {
|
||
|
|
ldo11_reg: LDO11 {
|
||
|
|
regulator-name = "vdd_ldo11";
|
||
|
|
regulator-min-microvolt = <1900000>;
|
||
|
|
regulator-max-microvolt = <1900000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
buck1_reg: BUCK1 {
|
||
|
|
regulator-name = "vdd_mif";
|
||
|
|
regulator-min-microvolt = <950000>;
|
||
|
|
regulator-max-microvolt = <1300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
buck9_reg: BUCK9 {
|
||
|
|
regulator-name = "CAM_ISP_CORE_1.2V";
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
};
|