83 lines
3.4 KiB
Plaintext
83 lines
3.4 KiB
Plaintext
|
TI AM654 SERDES
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: Should be "ti,phy-am654-serdes"
|
||
|
|
- reg : Address and length of the register set for the device.
|
||
|
|
- #phy-cells: determine the number of cells that should be given in the
|
||
|
|
phandle while referencing this phy. Should be "2". The 1st cell
|
||
|
|
corresponds to the phy type (should be one of the types specified in
|
||
|
|
include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes
|
||
|
|
lane function.
|
||
|
|
If SERDES0 is referenced 2nd cell should be:
|
||
|
|
0 - USB3
|
||
|
|
1 - PCIe0 Lane0
|
||
|
|
2 - ICSS2 SGMII Lane0
|
||
|
|
If SERDES1 is referenced 2nd cell should be:
|
||
|
|
0 - PCIe1 Lane0
|
||
|
|
1 - PCIe0 Lane1
|
||
|
|
2 - ICSS2 SGMII Lane1
|
||
|
|
- power-domains: As documented by the generic PM domain bindings in
|
||
|
|
Documentation/devicetree/bindings/power/power_domain.txt.
|
||
|
|
- clocks: List of clock-specifiers representing the input to the SERDES.
|
||
|
|
Should have 3 items representing the left input clock, external
|
||
|
|
reference clock and right input clock in that order.
|
||
|
|
- clock-output-names: List of clock names for each of the clock outputs of
|
||
|
|
SERDES. Should have 3 items for CMU reference clock,
|
||
|
|
left output clock and right output clock in that order.
|
||
|
|
- assigned-clocks: As defined in
|
||
|
|
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||
|
|
- assigned-clock-parents: As defined in
|
||
|
|
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||
|
|
- #clock-cells: Should be <1> to choose between the 3 output clocks.
|
||
|
|
Defined in Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||
|
|
|
||
|
|
The following macros are defined in dt-bindings/phy/phy-am654-serdes.h
|
||
|
|
for selecting the correct reference clock. This can be used while
|
||
|
|
specifying the clocks created by SERDES.
|
||
|
|
=> AM654_SERDES_CMU_REFCLK
|
||
|
|
=> AM654_SERDES_LO_REFCLK
|
||
|
|
=> AM654_SERDES_RO_REFCLK
|
||
|
|
|
||
|
|
- mux-controls: Phandle to the multiplexer that is used to select the lane
|
||
|
|
function. See #phy-cells above to see the multiplex values.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
Example for SERDES0 is given below. It has 3 clock inputs;
|
||
|
|
left input reference clock as indicated by <&k3_clks 153 4>, external
|
||
|
|
reference clock as indicated by <&k3_clks 153 1> and right input
|
||
|
|
reference clock as indicated by <&serdes1 AM654_SERDES_LO_REFCLK>. (The
|
||
|
|
right input of SERDES0 is connected to the left output of SERDES1).
|
||
|
|
|
||
|
|
SERDES0 registers 3 clock outputs as indicated in clock-output-names. The
|
||
|
|
first refers to the CMU reference clock, second refers to the left output
|
||
|
|
reference clock and the third refers to the right output reference clock.
|
||
|
|
|
||
|
|
The assigned-clocks and assigned-clock-parents is used here to set the
|
||
|
|
parent of left input reference clock to MAINHSDIV_CLKOUT4 and parent of
|
||
|
|
CMU reference clock to left input reference clock.
|
||
|
|
|
||
|
|
serdes0: serdes@900000 {
|
||
|
|
compatible = "ti,phy-am654-serdes";
|
||
|
|
reg = <0x0 0x900000 0x0 0x2000>;
|
||
|
|
reg-names = "serdes";
|
||
|
|
#phy-cells = <2>;
|
||
|
|
power-domains = <&k3_pds 153>;
|
||
|
|
clocks = <&k3_clks 153 4>, <&k3_clks 153 1>,
|
||
|
|
<&serdes1 AM654_SERDES_LO_REFCLK>;
|
||
|
|
clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk",
|
||
|
|
"serdes0_ro_refclk";
|
||
|
|
assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
|
||
|
|
assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
|
||
|
|
ti,serdes-clk = <&serdes0_clk>;
|
||
|
|
mux-controls = <&serdes_mux 0>;
|
||
|
|
#clock-cells = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
Example for PCIe consumer node using the SERDES PHY specifier is given below.
|
||
|
|
&pcie0_rc {
|
||
|
|
num-lanes = <2>;
|
||
|
|
phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
|
||
|
|
phy-names = "pcie-phy0", "pcie-phy1";
|
||
|
|
};
|