39 lines
1.1 KiB
Plaintext
39 lines
1.1 KiB
Plaintext
|
Rockchip EMMC PHY
|
||
|
-----------------------
|
||
|
|
||
|
Required properties:
|
||
|
- compatible: rockchip,rk3399-emmc-phy
|
||
|
- #phy-cells: must be 0
|
||
|
- reg: PHY register address offset and length in "general
|
||
|
register files"
|
||
|
|
||
|
Optional properties:
|
||
|
- clock-names: Should contain "emmcclk". Although this is listed as optional
|
||
|
(because most boards can get basic functionality without having
|
||
|
access to it), it is strongly suggested.
|
||
|
See ../clock/clock-bindings.txt for details.
|
||
|
- clocks: Should have a phandle to the card clock exported by the SDHCI driver.
|
||
|
- drive-impedance-ohm: Specifies the drive impedance in Ohm.
|
||
|
Possible values are 33, 40, 50, 66 and 100.
|
||
|
If not set, the default value of 50 will be applied.
|
||
|
|
||
|
Example:
|
||
|
|
||
|
|
||
|
grf: syscon@ff770000 {
|
||
|
compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
|
||
|
...
|
||
|
|
||
|
emmcphy: phy@f780 {
|
||
|
compatible = "rockchip,rk3399-emmc-phy";
|
||
|
reg = <0xf780 0x20>;
|
||
|
clocks = <&sdhci>;
|
||
|
clock-names = "emmcclk";
|
||
|
drive-impedance-ohm = <50>;
|
||
|
#phy-cells = <0>;
|
||
|
};
|
||
|
};
|