linux/linux-5.4.31/Documentation/devicetree/bindings/pci/pci-thunder-pem.txt

44 lines
1.5 KiB
Plaintext
Raw Normal View History

2024-01-30 10:43:28 +00:00
* ThunderX PEM PCIe host controller
Firmware-initialized PCI host controller found on some Cavium
ThunderX processors.
The properties and their meanings are identical to those described in
host-generic-pci.txt except as listed below.
Properties of the host controller node that differ from
host-generic-pci.txt:
- compatible : Must be "cavium,pci-host-thunder-pem"
- reg : Two entries: First the configuration space for down
stream devices base address and size, as accessed
from the parent bus. Second, the register bank of
the PEM device PCIe bridge.
Example:
pci@87e0,c2000000 {
compatible = "cavium,pci-host-thunder-pem";
device_type = "pci";
msi-parent = <&its>;
msi-map = <0 &its 0x10000 0x10000>;
bus-range = <0x8f 0xc7>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0x8880 0x8f000000 0x0 0x39000000>, /* Configuration space */
<0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */
ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
<0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
<0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
<0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
<0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
<0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
<0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
};