227 lines
6.5 KiB
YAML
227 lines
6.5 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/interrupt-controller/arm,gic.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: ARM Generic Interrupt Controller v1 and v2
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Marc Zyngier <marc.zyngier@arm.com>
|
||
|
|
|
||
|
|
description: |+
|
||
|
|
ARM SMP cores are often associated with a GIC, providing per processor
|
||
|
|
interrupts (PPI), shared processor interrupts (SPI) and software
|
||
|
|
generated interrupts (SGI).
|
||
|
|
|
||
|
|
Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
|
||
|
|
Secondary GICs are cascaded into the upward interrupt controller and do not
|
||
|
|
have PPIs or SGIs.
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: /schemas/interrupt-controller.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
oneOf:
|
||
|
|
- items:
|
||
|
|
- enum:
|
||
|
|
- arm,arm11mp-gic
|
||
|
|
- arm,cortex-a15-gic
|
||
|
|
- arm,cortex-a7-gic
|
||
|
|
- arm,cortex-a5-gic
|
||
|
|
- arm,cortex-a9-gic
|
||
|
|
- arm,eb11mp-gic
|
||
|
|
- arm,gic-400
|
||
|
|
- arm,pl390
|
||
|
|
- arm,tc11mp-gic
|
||
|
|
- nvidia,tegra210-agic
|
||
|
|
- qcom,msm-8660-qgic
|
||
|
|
- qcom,msm-qgic2
|
||
|
|
|
||
|
|
- items:
|
||
|
|
- const: arm,arm1176jzf-devchip-gic
|
||
|
|
- const: arm,arm11mp-gic
|
||
|
|
|
||
|
|
- items:
|
||
|
|
- const: brcm,brahma-b15-gic
|
||
|
|
- const: arm,cortex-a15-gic
|
||
|
|
|
||
|
|
interrupt-controller: true
|
||
|
|
|
||
|
|
"#address-cells":
|
||
|
|
enum: [ 0, 1 ]
|
||
|
|
"#size-cells":
|
||
|
|
const: 1
|
||
|
|
|
||
|
|
"#interrupt-cells":
|
||
|
|
const: 3
|
||
|
|
description: |
|
||
|
|
The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
|
||
|
|
interrupts.
|
||
|
|
|
||
|
|
The 2nd cell contains the interrupt number for the interrupt type.
|
||
|
|
SPI interrupts are in the range [0-987]. PPI interrupts are in the
|
||
|
|
range [0-15].
|
||
|
|
|
||
|
|
The 3rd cell is the flags, encoded as follows:
|
||
|
|
bits[3:0] trigger type and level flags.
|
||
|
|
1 = low-to-high edge triggered
|
||
|
|
2 = high-to-low edge triggered (invalid for SPIs)
|
||
|
|
4 = active high level-sensitive
|
||
|
|
8 = active low level-sensitive (invalid for SPIs).
|
||
|
|
bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
|
||
|
|
the 8 possible cpus attached to the GIC. A bit set to '1' indicated
|
||
|
|
the interrupt is wired to that CPU. Only valid for PPI interrupts.
|
||
|
|
Also note that the configurability of PPI interrupts is IMPLEMENTATION
|
||
|
|
DEFINED and as such not guaranteed to be present (most SoC available
|
||
|
|
in 2014 seem to ignore the setting of this flag and use the hardware
|
||
|
|
default value).
|
||
|
|
|
||
|
|
reg:
|
||
|
|
description: |
|
||
|
|
Specifies base physical address(s) and size of the GIC registers. The
|
||
|
|
first region is the GIC distributor register base and size. The 2nd region
|
||
|
|
is the GIC cpu interface register base and size.
|
||
|
|
|
||
|
|
For GICv2 with virtualization extensions, additional regions are
|
||
|
|
required for specifying the base physical address and size of the VGIC
|
||
|
|
registers. The first additional region is the GIC virtual interface
|
||
|
|
control register base and size. The 2nd additional region is the GIC
|
||
|
|
virtual cpu interface register base and size.
|
||
|
|
minItems: 2
|
||
|
|
maxItems: 4
|
||
|
|
|
||
|
|
ranges: true
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
description: Interrupt source of the parent interrupt controller on
|
||
|
|
secondary GICs, or VGIC maintenance interrupt on primary GIC (see
|
||
|
|
below).
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
cpu-offset:
|
||
|
|
description: per-cpu offset within the distributor and cpu interface
|
||
|
|
regions, used when the GIC doesn't have banked registers. The offset
|
||
|
|
is cpu-offset * cpu-nr.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 2
|
||
|
|
|
||
|
|
clock-names:
|
||
|
|
description: List of names for the GIC clock input(s). Valid clock names
|
||
|
|
depend on the GIC variant.
|
||
|
|
oneOf:
|
||
|
|
- const: ic_clk # for "arm,arm11mp-gic"
|
||
|
|
- const: PERIPHCLKEN # for "arm,cortex-a15-gic"
|
||
|
|
- items: # for "arm,cortex-a9-gic"
|
||
|
|
- const: PERIPHCLK
|
||
|
|
- const: PERIPHCLKEN
|
||
|
|
- const: clk # for "arm,gic-400" and "nvidia,tegra210"
|
||
|
|
- const: gclk #for "arm,pl390"
|
||
|
|
|
||
|
|
power-domains:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
|
||
|
|
patternProperties:
|
||
|
|
"^v2m@[0-9a-f]+$":
|
||
|
|
type: object
|
||
|
|
description: |
|
||
|
|
* GICv2m extension for MSI/MSI-x support (Optional)
|
||
|
|
|
||
|
|
Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s).
|
||
|
|
This is enabled by specifying v2m sub-node(s).
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
const: arm,gic-v2m-frame
|
||
|
|
|
||
|
|
msi-controller: true
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
description: GICv2m MSI interface register base and size
|
||
|
|
|
||
|
|
arm,msi-base-spi:
|
||
|
|
description: When the MSI_TYPER register contains an incorrect value,
|
||
|
|
this property should contain the SPI base of the MSI frame, overriding
|
||
|
|
the HW value.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
|
||
|
|
arm,msi-num-spis:
|
||
|
|
description: When the MSI_TYPER register contains an incorrect value,
|
||
|
|
this property should contain the number of SPIs assigned to the
|
||
|
|
frame, overriding the HW value.
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- msi-controller
|
||
|
|
- reg
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
// GICv1
|
||
|
|
intc: interrupt-controller@fff11000 {
|
||
|
|
compatible = "arm,cortex-a9-gic";
|
||
|
|
#interrupt-cells = <3>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
interrupt-controller;
|
||
|
|
reg = <0xfff11000 0x1000>,
|
||
|
|
<0xfff10100 0x100>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- |
|
||
|
|
// GICv2
|
||
|
|
interrupt-controller@2c001000 {
|
||
|
|
compatible = "arm,cortex-a15-gic";
|
||
|
|
#interrupt-cells = <3>;
|
||
|
|
interrupt-controller;
|
||
|
|
reg = <0x2c001000 0x1000>,
|
||
|
|
<0x2c002000 0x2000>,
|
||
|
|
<0x2c004000 0x2000>,
|
||
|
|
<0x2c006000 0x2000>;
|
||
|
|
interrupts = <1 9 0xf04>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- |
|
||
|
|
// GICv2m extension for MSI/MSI-x support
|
||
|
|
interrupt-controller@e1101000 {
|
||
|
|
compatible = "arm,gic-400";
|
||
|
|
#interrupt-cells = <3>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
interrupt-controller;
|
||
|
|
interrupts = <1 8 0xf04>;
|
||
|
|
ranges = <0 0xe1100000 0x100000>;
|
||
|
|
reg = <0xe1110000 0x01000>,
|
||
|
|
<0xe112f000 0x02000>,
|
||
|
|
<0xe1140000 0x10000>,
|
||
|
|
<0xe1160000 0x10000>;
|
||
|
|
|
||
|
|
v2m0: v2m@80000 {
|
||
|
|
compatible = "arm,gic-v2m-frame";
|
||
|
|
msi-controller;
|
||
|
|
reg = <0x80000 0x1000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
//...
|
||
|
|
|
||
|
|
v2mN: v2m@90000 {
|
||
|
|
compatible = "arm,gic-v2m-frame";
|
||
|
|
msi-controller;
|
||
|
|
reg = <0x90000 0x1000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
...
|