linux/linux-5.4.31/Documentation/devicetree/bindings/dma/owl-dma.txt

48 lines
1.7 KiB
Plaintext
Raw Normal View History

2024-01-30 10:43:28 +00:00
* Actions Semi Owl SoCs DMA controller
This binding follows the generic DMA bindings defined in dma.txt.
Required properties:
- compatible: Should be "actions,s900-dma".
- reg: Should contain DMA registers location and length.
- interrupts: Should contain 4 interrupts shared by all channel.
- #dma-cells: Must be <1>. Used to represent the number of integer
cells in the dmas property of client device.
- dma-channels: Physical channels supported.
- dma-requests: Number of DMA request signals supported by the controller.
Refer to Documentation/devicetree/bindings/dma/dma.txt
- clocks: Phandle and Specifier of the clock feeding the DMA controller.
Example:
Controller:
dma: dma-controller@e0260000 {
compatible = "actions,s900-dma";
reg = <0x0 0xe0260000 0x0 0x1000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
dma-channels = <12>;
dma-requests = <46>;
clocks = <&clock CLK_DMAC>;
};
Client:
DMA clients connected to the Actions Semi Owl SoCs DMA controller must
use the format described in the dma.txt file, using a two-cell specifier
for each channel.
The two cells in order are:
1. A phandle pointing to the DMA controller.
2. The channel id.
uart5: serial@e012a000 {
...
dma-names = "tx", "rx";
dmas = <&dma 26>, <&dma 27>;
...
};