638 lines
20 KiB
Plaintext
638 lines
20 KiB
Plaintext
|
Allwinner A10 Display Pipeline
|
||
|
|
==============================
|
||
|
|
|
||
|
|
The Allwinner A10 Display pipeline is composed of several components
|
||
|
|
that are going to be documented below:
|
||
|
|
|
||
|
|
For all connections between components up to the TCONs in the display
|
||
|
|
pipeline, when there are multiple components of the same type at the
|
||
|
|
same depth, the local endpoint ID must be the same as the remote
|
||
|
|
component's index. For example, if the remote endpoint is Frontend 1,
|
||
|
|
then the local endpoint ID must be 1.
|
||
|
|
|
||
|
|
Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0
|
||
|
|
[1] -- -- [1] [1] -- -- [1]
|
||
|
|
\ / \ /
|
||
|
|
X X
|
||
|
|
/ \ / \
|
||
|
|
[0] -- -- [0] [0] -- -- [0]
|
||
|
|
Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1
|
||
|
|
|
||
|
|
For a two pipeline system such as the one depicted above, the lines
|
||
|
|
represent the connections between the components, while the numbers
|
||
|
|
within the square brackets corresponds to the ID of the local endpoint.
|
||
|
|
|
||
|
|
The same rule also applies to DE 2.0 mixer-TCON connections:
|
||
|
|
|
||
|
|
Mixer 0 [0] ----------- [0] TCON 0
|
||
|
|
[1] ---- ---- [1]
|
||
|
|
\ /
|
||
|
|
X
|
||
|
|
/ \
|
||
|
|
[0] ---- ---- [0]
|
||
|
|
Mixer 1 [1] ----------- [1] TCON 1
|
||
|
|
|
||
|
|
HDMI Encoder
|
||
|
|
------------
|
||
|
|
|
||
|
|
The HDMI Encoder supports the HDMI video and audio outputs, and does
|
||
|
|
CEC. It is one end of the pipeline.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value must be one of:
|
||
|
|
* allwinner,sun4i-a10-hdmi
|
||
|
|
* allwinner,sun5i-a10s-hdmi
|
||
|
|
* allwinner,sun6i-a31-hdmi
|
||
|
|
- reg: base address and size of memory-mapped region
|
||
|
|
- interrupts: interrupt associated to this IP
|
||
|
|
- clocks: phandles to the clocks feeding the HDMI encoder
|
||
|
|
* ahb: the HDMI interface clock
|
||
|
|
* mod: the HDMI module clock
|
||
|
|
* ddc: the HDMI ddc clock (A31 only)
|
||
|
|
* pll-0: the first video PLL
|
||
|
|
* pll-1: the second video PLL
|
||
|
|
- clock-names: the clock names mentioned above
|
||
|
|
- resets: phandle to the reset control for the HDMI encoder (A31 only)
|
||
|
|
- dmas: phandles to the DMA channels used by the HDMI encoder
|
||
|
|
* ddc-tx: The channel for DDC transmission
|
||
|
|
* ddc-rx: The channel for DDC reception
|
||
|
|
* audio-tx: The channel used for audio transmission
|
||
|
|
- dma-names: the channel names mentioned above
|
||
|
|
|
||
|
|
- ports: A ports node with endpoint definitions as defined in
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
||
|
|
first port should be the input endpoint. The second should be the
|
||
|
|
output, usually to an HDMI connector.
|
||
|
|
|
||
|
|
DWC HDMI TX Encoder
|
||
|
|
-------------------
|
||
|
|
|
||
|
|
The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
|
||
|
|
with Allwinner's own PHY IP. It supports audio and video outputs and CEC.
|
||
|
|
|
||
|
|
These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
|
||
|
|
Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
|
||
|
|
following device-specific properties.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
|
||
|
|
- compatible: value must be one of:
|
||
|
|
* "allwinner,sun8i-a83t-dw-hdmi"
|
||
|
|
* "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"
|
||
|
|
* "allwinner,sun50i-h6-dw-hdmi"
|
||
|
|
- reg: base address and size of memory-mapped region
|
||
|
|
- reg-io-width: See dw_hdmi.txt. Shall be 1.
|
||
|
|
- interrupts: HDMI interrupt number
|
||
|
|
- clocks: phandles to the clocks feeding the HDMI encoder
|
||
|
|
* iahb: the HDMI bus clock
|
||
|
|
* isfr: the HDMI register clock
|
||
|
|
* tmds: TMDS clock
|
||
|
|
* cec: HDMI CEC clock (H6 only)
|
||
|
|
* hdcp: HDCP clock (H6 only)
|
||
|
|
* hdcp-bus: HDCP bus clock (H6 only)
|
||
|
|
- clock-names: the clock names mentioned above
|
||
|
|
- resets:
|
||
|
|
* ctrl: HDMI controller reset
|
||
|
|
* hdcp: HDCP reset (H6 only)
|
||
|
|
- reset-names: reset names mentioned above
|
||
|
|
- phys: phandle to the DWC HDMI PHY
|
||
|
|
- phy-names: must be "phy"
|
||
|
|
|
||
|
|
- ports: A ports node with endpoint definitions as defined in
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
||
|
|
first port should be the input endpoint. The second should be the
|
||
|
|
output, usually to an HDMI connector.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- hvcc-supply: the VCC power supply of the controller
|
||
|
|
|
||
|
|
DWC HDMI PHY
|
||
|
|
------------
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value must be one of:
|
||
|
|
* allwinner,sun8i-a83t-hdmi-phy
|
||
|
|
* allwinner,sun8i-h3-hdmi-phy
|
||
|
|
* allwinner,sun8i-r40-hdmi-phy
|
||
|
|
* allwinner,sun50i-a64-hdmi-phy
|
||
|
|
* allwinner,sun50i-h6-hdmi-phy
|
||
|
|
- reg: base address and size of memory-mapped region
|
||
|
|
- clocks: phandles to the clocks feeding the HDMI PHY
|
||
|
|
* bus: the HDMI PHY interface clock
|
||
|
|
* mod: the HDMI PHY module clock
|
||
|
|
- clock-names: the clock names mentioned above
|
||
|
|
- resets: phandle to the reset controller driving the PHY
|
||
|
|
- reset-names: must be "phy"
|
||
|
|
|
||
|
|
H3, A64 and R40 HDMI PHY require additional clocks:
|
||
|
|
- pll-0: parent of phy clock
|
||
|
|
- pll-1: second possible phy clock parent (A64/R40 only)
|
||
|
|
|
||
|
|
TV Encoder
|
||
|
|
----------
|
||
|
|
|
||
|
|
The TV Encoder supports the composite and VGA output. It is one end of
|
||
|
|
the pipeline.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value should be "allwinner,sun4i-a10-tv-encoder".
|
||
|
|
- reg: base address and size of memory-mapped region
|
||
|
|
- clocks: the clocks driving the TV encoder
|
||
|
|
- resets: phandle to the reset controller driving the encoder
|
||
|
|
|
||
|
|
- ports: A ports node with endpoint definitions as defined in
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
||
|
|
first port should be the input endpoint.
|
||
|
|
|
||
|
|
TCON
|
||
|
|
----
|
||
|
|
|
||
|
|
The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value must be either:
|
||
|
|
* allwinner,sun4i-a10-tcon
|
||
|
|
* allwinner,sun5i-a13-tcon
|
||
|
|
* allwinner,sun6i-a31-tcon
|
||
|
|
* allwinner,sun6i-a31s-tcon
|
||
|
|
* allwinner,sun7i-a20-tcon
|
||
|
|
* allwinner,sun8i-a23-tcon
|
||
|
|
* allwinner,sun8i-a33-tcon
|
||
|
|
* allwinner,sun8i-a83t-tcon-lcd
|
||
|
|
* allwinner,sun8i-a83t-tcon-tv
|
||
|
|
* allwinner,sun8i-r40-tcon-tv
|
||
|
|
* allwinner,sun8i-v3s-tcon
|
||
|
|
* allwinner,sun9i-a80-tcon-lcd
|
||
|
|
* allwinner,sun9i-a80-tcon-tv
|
||
|
|
* "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd"
|
||
|
|
* "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv"
|
||
|
|
* allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv
|
||
|
|
- reg: base address and size of memory-mapped region
|
||
|
|
- interrupts: interrupt associated to this IP
|
||
|
|
- clocks: phandles to the clocks feeding the TCON.
|
||
|
|
- 'ahb': the interface clocks
|
||
|
|
- 'tcon-ch0': The clock driving the TCON channel 0, if supported
|
||
|
|
- resets: phandles to the reset controllers driving the encoder
|
||
|
|
- "lcd": the reset line for the TCON
|
||
|
|
- "edp": the reset line for the eDP block (A80 only)
|
||
|
|
|
||
|
|
- clock-names: the clock names mentioned above
|
||
|
|
- reset-names: the reset names mentioned above
|
||
|
|
- clock-output-names: Name of the pixel clock created, if TCON supports
|
||
|
|
channel 0.
|
||
|
|
|
||
|
|
- ports: A ports node with endpoint definitions as defined in
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
||
|
|
first port should be the input endpoint, the second one the output
|
||
|
|
|
||
|
|
The output may have multiple endpoints. TCON can have 1 or 2 channels,
|
||
|
|
usually with the first channel being used for the panels interfaces
|
||
|
|
(RGB, LVDS, etc.), and the second being used for the outputs that
|
||
|
|
require another controller (TV Encoder, HDMI, etc.). The endpoints
|
||
|
|
will take an extra property, allwinner,tcon-channel, to specify the
|
||
|
|
channel the endpoint is associated to. If that property is not
|
||
|
|
present, the endpoint number will be used as the channel number.
|
||
|
|
|
||
|
|
For TCONs with channel 0, there is one more clock required:
|
||
|
|
- 'tcon-ch0': The clock driving the TCON channel 0
|
||
|
|
For TCONs with channel 1, there is one more clock required:
|
||
|
|
- 'tcon-ch1': The clock driving the TCON channel 1
|
||
|
|
|
||
|
|
When TCON support LVDS (all TCONs except TV TCONs on A83T, R40 and those found
|
||
|
|
in A13, H3, H5 and V3s SoCs), you need one more reset line:
|
||
|
|
- 'lvds': The reset line driving the LVDS logic
|
||
|
|
|
||
|
|
And on the A23, A31, A31s and A33, you need one more clock line:
|
||
|
|
- 'lvds-alt': An alternative clock source, separate from the TCON channel 0
|
||
|
|
clock, that can be used to drive the LVDS clock
|
||
|
|
|
||
|
|
TCON TOP
|
||
|
|
--------
|
||
|
|
|
||
|
|
TCON TOPs main purpose is to configure whole display pipeline. It determines
|
||
|
|
relationships between mixers and TCONs, selects source TCON for HDMI, muxes
|
||
|
|
LCD and TV encoder GPIO output, selects TV encoder clock source and contains
|
||
|
|
additional TV TCON and DSI gates.
|
||
|
|
|
||
|
|
It allows display pipeline to be configured in very different ways:
|
||
|
|
|
||
|
|
/ LCD0/LVDS0
|
||
|
|
/ [0] TCON-LCD0
|
||
|
|
| \ MIPI DSI
|
||
|
|
mixer0 |
|
||
|
|
\ / [1] TCON-LCD1 - LCD1/LVDS1
|
||
|
|
TCON-TOP
|
||
|
|
/ \ [2] TCON-TV0 [0] - TVE0/RGB
|
||
|
|
mixer1 | \
|
||
|
|
| TCON-TOP - HDMI
|
||
|
|
| /
|
||
|
|
\ [3] TCON-TV1 [1] - TVE1/RGB
|
||
|
|
|
||
|
|
Note that both TCON TOP references same physical unit. Both mixers can be
|
||
|
|
connected to any TCON. Not all TCON TOP variants support all features.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value must be one of:
|
||
|
|
* allwinner,sun8i-r40-tcon-top
|
||
|
|
* allwinner,sun50i-h6-tcon-top
|
||
|
|
- reg: base address and size of the memory-mapped region.
|
||
|
|
- clocks: phandle to the clocks feeding the TCON TOP
|
||
|
|
* bus: TCON TOP interface clock
|
||
|
|
* tcon-tv0: TCON TV0 clock
|
||
|
|
* tve0: TVE0 clock (R40 only)
|
||
|
|
* tcon-tv1: TCON TV1 clock (R40 only)
|
||
|
|
* tve1: TVE0 clock (R40 only)
|
||
|
|
* dsi: MIPI DSI clock (R40 only)
|
||
|
|
- clock-names: clock name mentioned above
|
||
|
|
- resets: phandle to the reset line driving the TCON TOP
|
||
|
|
- #clock-cells : must contain 1
|
||
|
|
- clock-output-names: Names of clocks created for TCON TV0 channel clock,
|
||
|
|
TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in
|
||
|
|
that order.
|
||
|
|
|
||
|
|
- ports: A ports node with endpoint definitions as defined in
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should
|
||
|
|
be defined:
|
||
|
|
* port 0 is input for mixer0 mux
|
||
|
|
* port 1 is output for mixer0 mux
|
||
|
|
* port 2 is input for mixer1 mux
|
||
|
|
* port 3 is output for mixer1 mux
|
||
|
|
* port 4 is input for HDMI mux
|
||
|
|
* port 5 is output for HDMI mux
|
||
|
|
All output endpoints for mixer muxes and input endpoints for HDMI mux should
|
||
|
|
have reg property with the id of the target TCON, as shown in above graph
|
||
|
|
(0-3 for mixer muxes and 0-1 for HDMI mux). All ports should have only one
|
||
|
|
endpoint connected to remote endpoint.
|
||
|
|
|
||
|
|
DRC
|
||
|
|
---
|
||
|
|
|
||
|
|
The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs
|
||
|
|
(A31, A23, A33, A80), allows to dynamically adjust pixel
|
||
|
|
brightness/contrast based on histogram measurements for LCD content
|
||
|
|
adaptive backlight control.
|
||
|
|
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value must be one of:
|
||
|
|
* allwinner,sun6i-a31-drc
|
||
|
|
* allwinner,sun6i-a31s-drc
|
||
|
|
* allwinner,sun8i-a23-drc
|
||
|
|
* allwinner,sun8i-a33-drc
|
||
|
|
* allwinner,sun9i-a80-drc
|
||
|
|
- reg: base address and size of the memory-mapped region.
|
||
|
|
- interrupts: interrupt associated to this IP
|
||
|
|
- clocks: phandles to the clocks feeding the DRC
|
||
|
|
* ahb: the DRC interface clock
|
||
|
|
* mod: the DRC module clock
|
||
|
|
* ram: the DRC DRAM clock
|
||
|
|
- clock-names: the clock names mentioned above
|
||
|
|
- resets: phandles to the reset line driving the DRC
|
||
|
|
|
||
|
|
- ports: A ports node with endpoint definitions as defined in
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
||
|
|
first port should be the input endpoints, the second one the outputs
|
||
|
|
|
||
|
|
Display Engine Backend
|
||
|
|
----------------------
|
||
|
|
|
||
|
|
The display engine backend exposes layers and sprites to the
|
||
|
|
system.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value must be one of:
|
||
|
|
* allwinner,sun4i-a10-display-backend
|
||
|
|
* allwinner,sun5i-a13-display-backend
|
||
|
|
* allwinner,sun6i-a31-display-backend
|
||
|
|
* allwinner,sun7i-a20-display-backend
|
||
|
|
* allwinner,sun8i-a23-display-backend
|
||
|
|
* allwinner,sun8i-a33-display-backend
|
||
|
|
* allwinner,sun9i-a80-display-backend
|
||
|
|
- reg: base address and size of the memory-mapped region.
|
||
|
|
- interrupts: interrupt associated to this IP
|
||
|
|
- clocks: phandles to the clocks feeding the frontend and backend
|
||
|
|
* ahb: the backend interface clock
|
||
|
|
* mod: the backend module clock
|
||
|
|
* ram: the backend DRAM clock
|
||
|
|
- clock-names: the clock names mentioned above
|
||
|
|
- resets: phandles to the reset controllers driving the backend
|
||
|
|
|
||
|
|
- ports: A ports node with endpoint definitions as defined in
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
||
|
|
first port should be the input endpoints, the second one the output
|
||
|
|
|
||
|
|
On the A33, some additional properties are required:
|
||
|
|
- reg needs to have an additional region corresponding to the SAT
|
||
|
|
- reg-names need to be set, with "be" and "sat"
|
||
|
|
- clocks and clock-names need to have a phandle to the SAT bus
|
||
|
|
clocks, whose name will be "sat"
|
||
|
|
- resets and reset-names need to have a phandle to the SAT bus
|
||
|
|
resets, whose name will be "sat"
|
||
|
|
|
||
|
|
DEU
|
||
|
|
---
|
||
|
|
|
||
|
|
The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
|
||
|
|
can sharpen the display content in both luma and chroma channels.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value must be one of:
|
||
|
|
* allwinner,sun9i-a80-deu
|
||
|
|
- reg: base address and size of the memory-mapped region.
|
||
|
|
- interrupts: interrupt associated to this IP
|
||
|
|
- clocks: phandles to the clocks feeding the DEU
|
||
|
|
* ahb: the DEU interface clock
|
||
|
|
* mod: the DEU module clock
|
||
|
|
* ram: the DEU DRAM clock
|
||
|
|
- clock-names: the clock names mentioned above
|
||
|
|
- resets: phandles to the reset line driving the DEU
|
||
|
|
|
||
|
|
- ports: A ports node with endpoint definitions as defined in
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
||
|
|
first port should be the input endpoints, the second one the outputs
|
||
|
|
|
||
|
|
Display Engine Frontend
|
||
|
|
-----------------------
|
||
|
|
|
||
|
|
The display engine frontend does formats conversion, scaling,
|
||
|
|
deinterlacing and color space conversion.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value must be one of:
|
||
|
|
* allwinner,sun4i-a10-display-frontend
|
||
|
|
* allwinner,sun5i-a13-display-frontend
|
||
|
|
* allwinner,sun6i-a31-display-frontend
|
||
|
|
* allwinner,sun7i-a20-display-frontend
|
||
|
|
* allwinner,sun8i-a23-display-frontend
|
||
|
|
* allwinner,sun8i-a33-display-frontend
|
||
|
|
* allwinner,sun9i-a80-display-frontend
|
||
|
|
- reg: base address and size of the memory-mapped region.
|
||
|
|
- interrupts: interrupt associated to this IP
|
||
|
|
- clocks: phandles to the clocks feeding the frontend and backend
|
||
|
|
* ahb: the backend interface clock
|
||
|
|
* mod: the backend module clock
|
||
|
|
* ram: the backend DRAM clock
|
||
|
|
- clock-names: the clock names mentioned above
|
||
|
|
- resets: phandles to the reset controllers driving the backend
|
||
|
|
|
||
|
|
- ports: A ports node with endpoint definitions as defined in
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
||
|
|
first port should be the input endpoints, the second one the outputs
|
||
|
|
|
||
|
|
Display Engine 2.0 Mixer
|
||
|
|
------------------------
|
||
|
|
|
||
|
|
The DE2 mixer have many functionalities, currently only layer blending is
|
||
|
|
supported.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value must be one of:
|
||
|
|
* allwinner,sun8i-a83t-de2-mixer-0
|
||
|
|
* allwinner,sun8i-a83t-de2-mixer-1
|
||
|
|
* allwinner,sun8i-h3-de2-mixer-0
|
||
|
|
* allwinner,sun8i-r40-de2-mixer-0
|
||
|
|
* allwinner,sun8i-r40-de2-mixer-1
|
||
|
|
* allwinner,sun8i-v3s-de2-mixer
|
||
|
|
* allwinner,sun50i-a64-de2-mixer-0
|
||
|
|
* allwinner,sun50i-a64-de2-mixer-1
|
||
|
|
* allwinner,sun50i-h6-de3-mixer-0
|
||
|
|
- reg: base address and size of the memory-mapped region.
|
||
|
|
- clocks: phandles to the clocks feeding the mixer
|
||
|
|
* bus: the mixer interface clock
|
||
|
|
* mod: the mixer module clock
|
||
|
|
- clock-names: the clock names mentioned above
|
||
|
|
- resets: phandles to the reset controllers driving the mixer
|
||
|
|
|
||
|
|
- ports: A ports node with endpoint definitions as defined in
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
||
|
|
first port should be the input endpoints, the second one the output
|
||
|
|
|
||
|
|
|
||
|
|
Display Engine Pipeline
|
||
|
|
-----------------------
|
||
|
|
|
||
|
|
The display engine pipeline (and its entry point, since it can be
|
||
|
|
either directly the backend or the frontend) is represented as an
|
||
|
|
extra node.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value must be one of:
|
||
|
|
* allwinner,sun4i-a10-display-engine
|
||
|
|
* allwinner,sun5i-a10s-display-engine
|
||
|
|
* allwinner,sun5i-a13-display-engine
|
||
|
|
* allwinner,sun6i-a31-display-engine
|
||
|
|
* allwinner,sun6i-a31s-display-engine
|
||
|
|
* allwinner,sun7i-a20-display-engine
|
||
|
|
* allwinner,sun8i-a23-display-engine
|
||
|
|
* allwinner,sun8i-a33-display-engine
|
||
|
|
* allwinner,sun8i-a83t-display-engine
|
||
|
|
* allwinner,sun8i-h3-display-engine
|
||
|
|
* allwinner,sun8i-r40-display-engine
|
||
|
|
* allwinner,sun8i-v3s-display-engine
|
||
|
|
* allwinner,sun9i-a80-display-engine
|
||
|
|
* allwinner,sun50i-a64-display-engine
|
||
|
|
* allwinner,sun50i-h6-display-engine
|
||
|
|
|
||
|
|
- allwinner,pipelines: list of phandle to the display engine
|
||
|
|
frontends (DE 1.0) or mixers (DE 2.0/3.0) available.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
panel: panel {
|
||
|
|
compatible = "olimex,lcd-olinuxino-43-ts";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
panel_input: endpoint {
|
||
|
|
remote-endpoint = <&tcon0_out_panel>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
connector {
|
||
|
|
compatible = "hdmi-connector";
|
||
|
|
type = "a";
|
||
|
|
|
||
|
|
port {
|
||
|
|
hdmi_con_in: endpoint {
|
||
|
|
remote-endpoint = <&hdmi_out_con>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
hdmi: hdmi@1c16000 {
|
||
|
|
compatible = "allwinner,sun5i-a10s-hdmi";
|
||
|
|
reg = <0x01c16000 0x1000>;
|
||
|
|
interrupts = <58>;
|
||
|
|
clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
|
||
|
|
<&ccu CLK_PLL_VIDEO0_2X>,
|
||
|
|
<&ccu CLK_PLL_VIDEO1_2X>;
|
||
|
|
clock-names = "ahb", "mod", "pll-0", "pll-1";
|
||
|
|
dmas = <&dma SUN4I_DMA_NORMAL 16>,
|
||
|
|
<&dma SUN4I_DMA_NORMAL 16>,
|
||
|
|
<&dma SUN4I_DMA_DEDICATED 24>;
|
||
|
|
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
port@0 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0>;
|
||
|
|
|
||
|
|
hdmi_in_tcon0: endpoint {
|
||
|
|
remote-endpoint = <&tcon0_out_hdmi>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
port@1 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <1>;
|
||
|
|
|
||
|
|
hdmi_out_con: endpoint {
|
||
|
|
remote-endpoint = <&hdmi_con_in>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
tve0: tv-encoder@1c0a000 {
|
||
|
|
compatible = "allwinner,sun4i-a10-tv-encoder";
|
||
|
|
reg = <0x01c0a000 0x1000>;
|
||
|
|
clocks = <&ahb_gates 34>;
|
||
|
|
resets = <&tcon_ch0_clk 0>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
tve0_in_tcon0: endpoint@0 {
|
||
|
|
reg = <0>;
|
||
|
|
remote-endpoint = <&tcon0_out_tve0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
tcon0: lcd-controller@1c0c000 {
|
||
|
|
compatible = "allwinner,sun5i-a13-tcon";
|
||
|
|
reg = <0x01c0c000 0x1000>;
|
||
|
|
interrupts = <44>;
|
||
|
|
resets = <&tcon_ch0_clk 1>;
|
||
|
|
reset-names = "lcd";
|
||
|
|
clocks = <&ahb_gates 36>,
|
||
|
|
<&tcon_ch0_clk>,
|
||
|
|
<&tcon_ch1_clk>;
|
||
|
|
clock-names = "ahb",
|
||
|
|
"tcon-ch0",
|
||
|
|
"tcon-ch1";
|
||
|
|
clock-output-names = "tcon-pixel-clock";
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
tcon0_in: port@0 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0>;
|
||
|
|
|
||
|
|
tcon0_in_be0: endpoint@0 {
|
||
|
|
reg = <0>;
|
||
|
|
remote-endpoint = <&be0_out_tcon0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
tcon0_out: port@1 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <1>;
|
||
|
|
|
||
|
|
tcon0_out_panel: endpoint@0 {
|
||
|
|
reg = <0>;
|
||
|
|
remote-endpoint = <&panel_input>;
|
||
|
|
};
|
||
|
|
|
||
|
|
tcon0_out_tve0: endpoint@1 {
|
||
|
|
reg = <1>;
|
||
|
|
remote-endpoint = <&tve0_in_tcon0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
fe0: display-frontend@1e00000 {
|
||
|
|
compatible = "allwinner,sun5i-a13-display-frontend";
|
||
|
|
reg = <0x01e00000 0x20000>;
|
||
|
|
interrupts = <47>;
|
||
|
|
clocks = <&ahb_gates 46>, <&de_fe_clk>,
|
||
|
|
<&dram_gates 25>;
|
||
|
|
clock-names = "ahb", "mod",
|
||
|
|
"ram";
|
||
|
|
resets = <&de_fe_clk>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
fe0_out: port@1 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <1>;
|
||
|
|
|
||
|
|
fe0_out_be0: endpoint {
|
||
|
|
remote-endpoint = <&be0_in_fe0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
be0: display-backend@1e60000 {
|
||
|
|
compatible = "allwinner,sun5i-a13-display-backend";
|
||
|
|
reg = <0x01e60000 0x10000>;
|
||
|
|
interrupts = <47>;
|
||
|
|
clocks = <&ahb_gates 44>, <&de_be_clk>,
|
||
|
|
<&dram_gates 26>;
|
||
|
|
clock-names = "ahb", "mod",
|
||
|
|
"ram";
|
||
|
|
resets = <&de_be_clk>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
be0_in: port@0 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0>;
|
||
|
|
|
||
|
|
be0_in_fe0: endpoint@0 {
|
||
|
|
reg = <0>;
|
||
|
|
remote-endpoint = <&fe0_out_be0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
be0_out: port@1 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <1>;
|
||
|
|
|
||
|
|
be0_out_tcon0: endpoint@0 {
|
||
|
|
reg = <0>;
|
||
|
|
remote-endpoint = <&tcon0_in_be0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
display-engine {
|
||
|
|
compatible = "allwinner,sun5i-a13-display-engine";
|
||
|
|
allwinner,pipelines = <&fe0>;
|
||
|
|
};
|