65 lines
2.3 KiB
Plaintext
65 lines
2.3 KiB
Plaintext
|
Device-Tree bindings for hisilicon ADE display controller driver
|
||
|
|
|
||
|
|
ADE (Advanced Display Engine) is the display controller which grab image
|
||
|
|
data from memory, do composition, do post image processing, generate RGB
|
||
|
|
timing stream and transfer to DSI.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: value should be "hisilicon,hi6220-ade".
|
||
|
|
- reg: physical base address and length of the ADE controller's registers.
|
||
|
|
- hisilicon,noc-syscon: ADE NOC QoS syscon.
|
||
|
|
- resets: The ADE reset controller node.
|
||
|
|
- interrupt: the ldi vblank interrupt number used.
|
||
|
|
- clocks: a list of phandle + clock-specifier pairs, one for each entry
|
||
|
|
in clock-names.
|
||
|
|
- clock-names: should contain:
|
||
|
|
"clk_ade_core" for the ADE core clock.
|
||
|
|
"clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with
|
||
|
|
jpeg codec.
|
||
|
|
"clk_ade_pix" for the ADE pixel clock.
|
||
|
|
- assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks'
|
||
|
|
phandle + clock-specifier pairs.
|
||
|
|
- assigned-clock-rates: clock rates, one for each entry in assigned-clocks.
|
||
|
|
The rate of "clk_ade_core" could be "360000000" or "180000000";
|
||
|
|
The rate of "clk_codec_jpeg" could be or less than "1440000000".
|
||
|
|
These rate values could be configured according to performance and power
|
||
|
|
consumption.
|
||
|
|
- port: the output port. This contains one endpoint subnode, with its
|
||
|
|
remote-endpoint set to the phandle of the connected DSI input endpoint.
|
||
|
|
See Documentation/devicetree/bindings/graph.txt for more device graph info.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- dma-coherent: Present if dma operations are coherent.
|
||
|
|
|
||
|
|
|
||
|
|
A example of HiKey board hi6220 SoC specific DT entry:
|
||
|
|
Example:
|
||
|
|
|
||
|
|
ade: ade@f4100000 {
|
||
|
|
compatible = "hisilicon,hi6220-ade";
|
||
|
|
reg = <0x0 0xf4100000 0x0 0x7800>;
|
||
|
|
reg-names = "ade_base";
|
||
|
|
hisilicon,noc-syscon = <&medianoc_ade>;
|
||
|
|
resets = <&media_ctrl MEDIA_ADE>;
|
||
|
|
interrupts = <0 115 4>; /* ldi interrupt */
|
||
|
|
|
||
|
|
clocks = <&media_ctrl HI6220_ADE_CORE>,
|
||
|
|
<&media_ctrl HI6220_CODEC_JPEG>,
|
||
|
|
<&media_ctrl HI6220_ADE_PIX_SRC>;
|
||
|
|
/*clock name*/
|
||
|
|
clock-names = "clk_ade_core",
|
||
|
|
"clk_codec_jpeg",
|
||
|
|
"clk_ade_pix";
|
||
|
|
|
||
|
|
assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
|
||
|
|
<&media_ctrl HI6220_CODEC_JPEG>;
|
||
|
|
assigned-clock-rates = <360000000>, <288000000>;
|
||
|
|
dma-coherent;
|
||
|
|
|
||
|
|
port {
|
||
|
|
ade_out: endpoint {
|
||
|
|
remote-endpoint = <&dsi_in>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|