445 lines
11 KiB
ArmAsm
445 lines
11 KiB
ArmAsm
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||
|
/*
|
||
|
* linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
|
||
|
*
|
||
|
* PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
|
||
|
*
|
||
|
* Heavily based on proc-arm926.S and proc-xsc3.S
|
||
|
*/
|
||
|
|
||
|
#include <linux/linkage.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <asm/assembler.h>
|
||
|
#include <asm/hwcap.h>
|
||
|
#include <asm/pgtable-hwdef.h>
|
||
|
#include <asm/pgtable.h>
|
||
|
#include <asm/page.h>
|
||
|
#include <asm/ptrace.h>
|
||
|
#include "proc-macros.S"
|
||
|
|
||
|
/*
|
||
|
* This is the maximum size of an area which will be flushed. If the
|
||
|
* area is larger than this, then we flush the whole cache.
|
||
|
*/
|
||
|
#define CACHE_DLIMIT 32768
|
||
|
|
||
|
/*
|
||
|
* The cache line size of the L1 D cache.
|
||
|
*/
|
||
|
#define CACHE_DLINESIZE 32
|
||
|
|
||
|
/*
|
||
|
* cpu_mohawk_proc_init()
|
||
|
*/
|
||
|
ENTRY(cpu_mohawk_proc_init)
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* cpu_mohawk_proc_fin()
|
||
|
*/
|
||
|
ENTRY(cpu_mohawk_proc_fin)
|
||
|
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
|
||
|
bic r0, r0, #0x1800 @ ...iz...........
|
||
|
bic r0, r0, #0x0006 @ .............ca.
|
||
|
mcr p15, 0, r0, c1, c0, 0 @ disable caches
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* cpu_mohawk_reset(loc)
|
||
|
*
|
||
|
* Perform a soft reset of the system. Put the CPU into the
|
||
|
* same state as it would be if it had been reset, and branch
|
||
|
* to what would be the reset vector.
|
||
|
*
|
||
|
* loc: location to jump to for soft reset
|
||
|
*
|
||
|
* (same as arm926)
|
||
|
*/
|
||
|
.align 5
|
||
|
.pushsection .idmap.text, "ax"
|
||
|
ENTRY(cpu_mohawk_reset)
|
||
|
mov ip, #0
|
||
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
|
||
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
||
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
||
|
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
|
||
|
bic ip, ip, #0x0007 @ .............cam
|
||
|
bic ip, ip, #0x1100 @ ...i...s........
|
||
|
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
|
||
|
ret r0
|
||
|
ENDPROC(cpu_mohawk_reset)
|
||
|
.popsection
|
||
|
|
||
|
/*
|
||
|
* cpu_mohawk_do_idle()
|
||
|
*
|
||
|
* Called with IRQs disabled
|
||
|
*/
|
||
|
.align 5
|
||
|
ENTRY(cpu_mohawk_do_idle)
|
||
|
mov r0, #0
|
||
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
||
|
mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* flush_icache_all()
|
||
|
*
|
||
|
* Unconditionally clean and invalidate the entire icache.
|
||
|
*/
|
||
|
ENTRY(mohawk_flush_icache_all)
|
||
|
mov r0, #0
|
||
|
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
|
||
|
ret lr
|
||
|
ENDPROC(mohawk_flush_icache_all)
|
||
|
|
||
|
/*
|
||
|
* flush_user_cache_all()
|
||
|
*
|
||
|
* Clean and invalidate all cache entries in a particular
|
||
|
* address space.
|
||
|
*/
|
||
|
ENTRY(mohawk_flush_user_cache_all)
|
||
|
/* FALLTHROUGH */
|
||
|
|
||
|
/*
|
||
|
* flush_kern_cache_all()
|
||
|
*
|
||
|
* Clean and invalidate the entire cache.
|
||
|
*/
|
||
|
ENTRY(mohawk_flush_kern_cache_all)
|
||
|
mov r2, #VM_EXEC
|
||
|
mov ip, #0
|
||
|
__flush_whole_cache:
|
||
|
mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
|
||
|
tst r2, #VM_EXEC
|
||
|
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
|
||
|
mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* flush_user_cache_range(start, end, flags)
|
||
|
*
|
||
|
* Clean and invalidate a range of cache entries in the
|
||
|
* specified address range.
|
||
|
*
|
||
|
* - start - start address (inclusive)
|
||
|
* - end - end address (exclusive)
|
||
|
* - flags - vm_flags describing address space
|
||
|
*
|
||
|
* (same as arm926)
|
||
|
*/
|
||
|
ENTRY(mohawk_flush_user_cache_range)
|
||
|
mov ip, #0
|
||
|
sub r3, r1, r0 @ calculate total size
|
||
|
cmp r3, #CACHE_DLIMIT
|
||
|
bgt __flush_whole_cache
|
||
|
1: tst r2, #VM_EXEC
|
||
|
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
|
||
|
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
|
||
|
add r0, r0, #CACHE_DLINESIZE
|
||
|
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
|
||
|
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
|
||
|
add r0, r0, #CACHE_DLINESIZE
|
||
|
cmp r0, r1
|
||
|
blo 1b
|
||
|
tst r2, #VM_EXEC
|
||
|
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* coherent_kern_range(start, end)
|
||
|
*
|
||
|
* Ensure coherency between the Icache and the Dcache in the
|
||
|
* region described by start, end. If you have non-snooping
|
||
|
* Harvard caches, you need to implement this function.
|
||
|
*
|
||
|
* - start - virtual start address
|
||
|
* - end - virtual end address
|
||
|
*/
|
||
|
ENTRY(mohawk_coherent_kern_range)
|
||
|
/* FALLTHROUGH */
|
||
|
|
||
|
/*
|
||
|
* coherent_user_range(start, end)
|
||
|
*
|
||
|
* Ensure coherency between the Icache and the Dcache in the
|
||
|
* region described by start, end. If you have non-snooping
|
||
|
* Harvard caches, you need to implement this function.
|
||
|
*
|
||
|
* - start - virtual start address
|
||
|
* - end - virtual end address
|
||
|
*
|
||
|
* (same as arm926)
|
||
|
*/
|
||
|
ENTRY(mohawk_coherent_user_range)
|
||
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
||
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
||
|
mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
|
||
|
add r0, r0, #CACHE_DLINESIZE
|
||
|
cmp r0, r1
|
||
|
blo 1b
|
||
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
||
|
mov r0, #0
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* flush_kern_dcache_area(void *addr, size_t size)
|
||
|
*
|
||
|
* Ensure no D cache aliasing occurs, either with itself or
|
||
|
* the I cache
|
||
|
*
|
||
|
* - addr - kernel address
|
||
|
* - size - region size
|
||
|
*/
|
||
|
ENTRY(mohawk_flush_kern_dcache_area)
|
||
|
add r1, r0, r1
|
||
|
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
|
||
|
add r0, r0, #CACHE_DLINESIZE
|
||
|
cmp r0, r1
|
||
|
blo 1b
|
||
|
mov r0, #0
|
||
|
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
|
||
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* dma_inv_range(start, end)
|
||
|
*
|
||
|
* Invalidate (discard) the specified virtual address range.
|
||
|
* May not write back any entries. If 'start' or 'end'
|
||
|
* are not cache line aligned, those lines must be written
|
||
|
* back.
|
||
|
*
|
||
|
* - start - virtual start address
|
||
|
* - end - virtual end address
|
||
|
*
|
||
|
* (same as v4wb)
|
||
|
*/
|
||
|
mohawk_dma_inv_range:
|
||
|
tst r0, #CACHE_DLINESIZE - 1
|
||
|
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
|
||
|
tst r1, #CACHE_DLINESIZE - 1
|
||
|
mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
|
||
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
||
|
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
|
||
|
add r0, r0, #CACHE_DLINESIZE
|
||
|
cmp r0, r1
|
||
|
blo 1b
|
||
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* dma_clean_range(start, end)
|
||
|
*
|
||
|
* Clean the specified virtual address range.
|
||
|
*
|
||
|
* - start - virtual start address
|
||
|
* - end - virtual end address
|
||
|
*
|
||
|
* (same as v4wb)
|
||
|
*/
|
||
|
mohawk_dma_clean_range:
|
||
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
||
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
||
|
add r0, r0, #CACHE_DLINESIZE
|
||
|
cmp r0, r1
|
||
|
blo 1b
|
||
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* dma_flush_range(start, end)
|
||
|
*
|
||
|
* Clean and invalidate the specified virtual address range.
|
||
|
*
|
||
|
* - start - virtual start address
|
||
|
* - end - virtual end address
|
||
|
*/
|
||
|
ENTRY(mohawk_dma_flush_range)
|
||
|
bic r0, r0, #CACHE_DLINESIZE - 1
|
||
|
1:
|
||
|
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
|
||
|
add r0, r0, #CACHE_DLINESIZE
|
||
|
cmp r0, r1
|
||
|
blo 1b
|
||
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* dma_map_area(start, size, dir)
|
||
|
* - start - kernel virtual start address
|
||
|
* - size - size of region
|
||
|
* - dir - DMA direction
|
||
|
*/
|
||
|
ENTRY(mohawk_dma_map_area)
|
||
|
add r1, r1, r0
|
||
|
cmp r2, #DMA_TO_DEVICE
|
||
|
beq mohawk_dma_clean_range
|
||
|
bcs mohawk_dma_inv_range
|
||
|
b mohawk_dma_flush_range
|
||
|
ENDPROC(mohawk_dma_map_area)
|
||
|
|
||
|
/*
|
||
|
* dma_unmap_area(start, size, dir)
|
||
|
* - start - kernel virtual start address
|
||
|
* - size - size of region
|
||
|
* - dir - DMA direction
|
||
|
*/
|
||
|
ENTRY(mohawk_dma_unmap_area)
|
||
|
ret lr
|
||
|
ENDPROC(mohawk_dma_unmap_area)
|
||
|
|
||
|
.globl mohawk_flush_kern_cache_louis
|
||
|
.equ mohawk_flush_kern_cache_louis, mohawk_flush_kern_cache_all
|
||
|
|
||
|
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
|
||
|
define_cache_functions mohawk
|
||
|
|
||
|
ENTRY(cpu_mohawk_dcache_clean_area)
|
||
|
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
||
|
add r0, r0, #CACHE_DLINESIZE
|
||
|
subs r1, r1, #CACHE_DLINESIZE
|
||
|
bhi 1b
|
||
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* cpu_mohawk_switch_mm(pgd)
|
||
|
*
|
||
|
* Set the translation base pointer to be as described by pgd.
|
||
|
*
|
||
|
* pgd: new page tables
|
||
|
*/
|
||
|
.align 5
|
||
|
ENTRY(cpu_mohawk_switch_mm)
|
||
|
mov ip, #0
|
||
|
mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
|
||
|
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
|
||
|
mcr p15, 0, ip, c7, c10, 4 @ drain WB
|
||
|
orr r0, r0, #0x18 @ cache the page table in L2
|
||
|
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
|
||
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
||
|
ret lr
|
||
|
|
||
|
/*
|
||
|
* cpu_mohawk_set_pte_ext(ptep, pte, ext)
|
||
|
*
|
||
|
* Set a PTE and flush it out
|
||
|
*/
|
||
|
.align 5
|
||
|
ENTRY(cpu_mohawk_set_pte_ext)
|
||
|
#ifdef CONFIG_MMU
|
||
|
armv3_set_pte_ext
|
||
|
mov r0, r0
|
||
|
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
|
||
|
mcr p15, 0, r0, c7, c10, 4 @ drain WB
|
||
|
ret lr
|
||
|
#endif
|
||
|
|
||
|
.globl cpu_mohawk_suspend_size
|
||
|
.equ cpu_mohawk_suspend_size, 4 * 6
|
||
|
#ifdef CONFIG_ARM_CPU_SUSPEND
|
||
|
ENTRY(cpu_mohawk_do_suspend)
|
||
|
stmfd sp!, {r4 - r9, lr}
|
||
|
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
|
||
|
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
|
||
|
mrc p15, 0, r6, c13, c0, 0 @ PID
|
||
|
mrc p15, 0, r7, c3, c0, 0 @ domain ID
|
||
|
mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
|
||
|
mrc p15, 0, r9, c1, c0, 0 @ control reg
|
||
|
bic r4, r4, #2 @ clear frequency change bit
|
||
|
stmia r0, {r4 - r9} @ store cp regs
|
||
|
ldmia sp!, {r4 - r9, pc}
|
||
|
ENDPROC(cpu_mohawk_do_suspend)
|
||
|
|
||
|
ENTRY(cpu_mohawk_do_resume)
|
||
|
ldmia r0, {r4 - r9} @ load cp regs
|
||
|
mov ip, #0
|
||
|
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
|
||
|
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
|
||
|
mcr p15, 0, ip, c7, c5, 4 @ flush prefetch buffer
|
||
|
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
|
||
|
mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
|
||
|
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
|
||
|
mcr p15, 0, r6, c13, c0, 0 @ PID
|
||
|
mcr p15, 0, r7, c3, c0, 0 @ domain ID
|
||
|
orr r1, r1, #0x18 @ cache the page table in L2
|
||
|
mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
|
||
|
mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
|
||
|
mov r0, r9 @ control register
|
||
|
b cpu_resume_mmu
|
||
|
ENDPROC(cpu_mohawk_do_resume)
|
||
|
#endif
|
||
|
|
||
|
.type __mohawk_setup, #function
|
||
|
__mohawk_setup:
|
||
|
mov r0, #0
|
||
|
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches
|
||
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
||
|
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs
|
||
|
orr r4, r4, #0x18 @ cache the page table in L2
|
||
|
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
|
||
|
|
||
|
mov r0, #0 @ don't allow CP access
|
||
|
mcr p15, 0, r0, c15, c1, 0 @ write CP access register
|
||
|
|
||
|
adr r5, mohawk_crval
|
||
|
ldmia r5, {r5, r6}
|
||
|
mrc p15, 0, r0, c1, c0 @ get control register
|
||
|
bic r0, r0, r5
|
||
|
orr r0, r0, r6
|
||
|
ret lr
|
||
|
|
||
|
.size __mohawk_setup, . - __mohawk_setup
|
||
|
|
||
|
/*
|
||
|
* R
|
||
|
* .RVI ZFRS BLDP WCAM
|
||
|
* .011 1001 ..00 0101
|
||
|
*
|
||
|
*/
|
||
|
.type mohawk_crval, #object
|
||
|
mohawk_crval:
|
||
|
crval clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
|
||
|
|
||
|
__INITDATA
|
||
|
|
||
|
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
|
||
|
define_processor_functions mohawk, dabort=v5t_early_abort, pabort=legacy_pabort
|
||
|
|
||
|
.section ".rodata"
|
||
|
|
||
|
string cpu_arch_name, "armv5te"
|
||
|
string cpu_elf_name, "v5"
|
||
|
string cpu_mohawk_name, "Marvell 88SV331x"
|
||
|
|
||
|
.align
|
||
|
|
||
|
.section ".proc.info.init", #alloc
|
||
|
|
||
|
.type __88sv331x_proc_info,#object
|
||
|
__88sv331x_proc_info:
|
||
|
.long 0x56158000 @ Marvell 88SV331x (MOHAWK)
|
||
|
.long 0xfffff000
|
||
|
.long PMD_TYPE_SECT | \
|
||
|
PMD_SECT_BUFFERABLE | \
|
||
|
PMD_SECT_CACHEABLE | \
|
||
|
PMD_BIT4 | \
|
||
|
PMD_SECT_AP_WRITE | \
|
||
|
PMD_SECT_AP_READ
|
||
|
.long PMD_TYPE_SECT | \
|
||
|
PMD_BIT4 | \
|
||
|
PMD_SECT_AP_WRITE | \
|
||
|
PMD_SECT_AP_READ
|
||
|
initfn __mohawk_setup, __88sv331x_proc_info
|
||
|
.long cpu_arch_name
|
||
|
.long cpu_elf_name
|
||
|
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
|
||
|
.long cpu_mohawk_name
|
||
|
.long mohawk_processor_functions
|
||
|
.long v4wbi_tlb_fns
|
||
|
.long v4wb_user_fns
|
||
|
.long mohawk_cache_fns
|
||
|
.size __88sv331x_proc_info, . - __88sv331x_proc_info
|