395 lines
8.5 KiB
C
395 lines
8.5 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
|
/*
|
||
|
|
* Copyright (C) 2016-2018 Broadcom
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <linux/delay.h>
|
||
|
|
#include <linux/io.h>
|
||
|
|
#include <linux/module.h>
|
||
|
|
#include <linux/of.h>
|
||
|
|
#include <linux/phy/phy.h>
|
||
|
|
#include <linux/platform_device.h>
|
||
|
|
|
||
|
|
enum bcm_usb_phy_version {
|
||
|
|
BCM_SR_USB_COMBO_PHY,
|
||
|
|
BCM_SR_USB_HS_PHY,
|
||
|
|
};
|
||
|
|
|
||
|
|
enum bcm_usb_phy_reg {
|
||
|
|
PLL_NDIV_FRAC,
|
||
|
|
PLL_NDIV_INT,
|
||
|
|
PLL_CTRL,
|
||
|
|
PHY_CTRL,
|
||
|
|
PHY_PLL_CTRL,
|
||
|
|
};
|
||
|
|
|
||
|
|
/* USB PHY registers */
|
||
|
|
|
||
|
|
static const u8 bcm_usb_combo_phy_ss[] = {
|
||
|
|
[PLL_CTRL] = 0x18,
|
||
|
|
[PHY_CTRL] = 0x14,
|
||
|
|
};
|
||
|
|
|
||
|
|
static const u8 bcm_usb_combo_phy_hs[] = {
|
||
|
|
[PLL_NDIV_FRAC] = 0x04,
|
||
|
|
[PLL_NDIV_INT] = 0x08,
|
||
|
|
[PLL_CTRL] = 0x0c,
|
||
|
|
[PHY_CTRL] = 0x10,
|
||
|
|
};
|
||
|
|
|
||
|
|
#define HSPLL_NDIV_INT_VAL 0x13
|
||
|
|
#define HSPLL_NDIV_FRAC_VAL 0x1005
|
||
|
|
|
||
|
|
static const u8 bcm_usb_hs_phy[] = {
|
||
|
|
[PLL_NDIV_FRAC] = 0x0,
|
||
|
|
[PLL_NDIV_INT] = 0x4,
|
||
|
|
[PLL_CTRL] = 0x8,
|
||
|
|
[PHY_CTRL] = 0xc,
|
||
|
|
};
|
||
|
|
|
||
|
|
enum pll_ctrl_bits {
|
||
|
|
PLL_RESETB,
|
||
|
|
SSPLL_SUSPEND_EN,
|
||
|
|
PLL_SEQ_START,
|
||
|
|
PLL_LOCK,
|
||
|
|
PLL_PDIV,
|
||
|
|
};
|
||
|
|
|
||
|
|
static const u8 u3pll_ctrl[] = {
|
||
|
|
[PLL_RESETB] = 0,
|
||
|
|
[SSPLL_SUSPEND_EN] = 1,
|
||
|
|
[PLL_SEQ_START] = 2,
|
||
|
|
[PLL_LOCK] = 3,
|
||
|
|
};
|
||
|
|
|
||
|
|
#define HSPLL_PDIV_MASK 0xF
|
||
|
|
#define HSPLL_PDIV_VAL 0x1
|
||
|
|
|
||
|
|
static const u8 u2pll_ctrl[] = {
|
||
|
|
[PLL_PDIV] = 1,
|
||
|
|
[PLL_RESETB] = 5,
|
||
|
|
[PLL_LOCK] = 6,
|
||
|
|
};
|
||
|
|
|
||
|
|
enum bcm_usb_phy_ctrl_bits {
|
||
|
|
CORERDY,
|
||
|
|
AFE_LDO_PWRDWNB,
|
||
|
|
AFE_PLL_PWRDWNB,
|
||
|
|
AFE_BG_PWRDWNB,
|
||
|
|
PHY_ISO,
|
||
|
|
PHY_RESETB,
|
||
|
|
PHY_PCTL,
|
||
|
|
};
|
||
|
|
|
||
|
|
#define PHY_PCTL_MASK 0xffff
|
||
|
|
/*
|
||
|
|
* 0x0806 of PCTL_VAL has below bits set
|
||
|
|
* BIT-8 : refclk divider 1
|
||
|
|
* BIT-3:2: device mode; mode is not effect
|
||
|
|
* BIT-1: soft reset active low
|
||
|
|
*/
|
||
|
|
#define HSPHY_PCTL_VAL 0x0806
|
||
|
|
#define SSPHY_PCTL_VAL 0x0006
|
||
|
|
|
||
|
|
static const u8 u3phy_ctrl[] = {
|
||
|
|
[PHY_RESETB] = 1,
|
||
|
|
[PHY_PCTL] = 2,
|
||
|
|
};
|
||
|
|
|
||
|
|
static const u8 u2phy_ctrl[] = {
|
||
|
|
[CORERDY] = 0,
|
||
|
|
[AFE_LDO_PWRDWNB] = 1,
|
||
|
|
[AFE_PLL_PWRDWNB] = 2,
|
||
|
|
[AFE_BG_PWRDWNB] = 3,
|
||
|
|
[PHY_ISO] = 4,
|
||
|
|
[PHY_RESETB] = 5,
|
||
|
|
[PHY_PCTL] = 6,
|
||
|
|
};
|
||
|
|
|
||
|
|
struct bcm_usb_phy_cfg {
|
||
|
|
uint32_t type;
|
||
|
|
uint32_t version;
|
||
|
|
void __iomem *regs;
|
||
|
|
struct phy *phy;
|
||
|
|
const u8 *offset;
|
||
|
|
};
|
||
|
|
|
||
|
|
#define PLL_LOCK_RETRY_COUNT 1000
|
||
|
|
|
||
|
|
enum bcm_usb_phy_type {
|
||
|
|
USB_HS_PHY,
|
||
|
|
USB_SS_PHY,
|
||
|
|
};
|
||
|
|
|
||
|
|
#define NUM_BCM_SR_USB_COMBO_PHYS 2
|
||
|
|
|
||
|
|
static inline void bcm_usb_reg32_clrbits(void __iomem *addr, uint32_t clear)
|
||
|
|
{
|
||
|
|
writel(readl(addr) & ~clear, addr);
|
||
|
|
}
|
||
|
|
|
||
|
|
static inline void bcm_usb_reg32_setbits(void __iomem *addr, uint32_t set)
|
||
|
|
{
|
||
|
|
writel(readl(addr) | set, addr);
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm_usb_pll_lock_check(void __iomem *addr, u32 bit)
|
||
|
|
{
|
||
|
|
int retry;
|
||
|
|
u32 rd_data;
|
||
|
|
|
||
|
|
retry = PLL_LOCK_RETRY_COUNT;
|
||
|
|
do {
|
||
|
|
rd_data = readl(addr);
|
||
|
|
if (rd_data & bit)
|
||
|
|
return 0;
|
||
|
|
udelay(1);
|
||
|
|
} while (--retry > 0);
|
||
|
|
|
||
|
|
pr_err("%s: FAIL\n", __func__);
|
||
|
|
return -ETIMEDOUT;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm_usb_ss_phy_init(struct bcm_usb_phy_cfg *phy_cfg)
|
||
|
|
{
|
||
|
|
int ret = 0;
|
||
|
|
void __iomem *regs = phy_cfg->regs;
|
||
|
|
const u8 *offset;
|
||
|
|
u32 rd_data;
|
||
|
|
|
||
|
|
offset = phy_cfg->offset;
|
||
|
|
|
||
|
|
/* Set pctl with mode and soft reset */
|
||
|
|
rd_data = readl(regs + offset[PHY_CTRL]);
|
||
|
|
rd_data &= ~(PHY_PCTL_MASK << u3phy_ctrl[PHY_PCTL]);
|
||
|
|
rd_data |= (SSPHY_PCTL_VAL << u3phy_ctrl[PHY_PCTL]);
|
||
|
|
writel(rd_data, regs + offset[PHY_CTRL]);
|
||
|
|
|
||
|
|
bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL],
|
||
|
|
BIT(u3pll_ctrl[SSPLL_SUSPEND_EN]));
|
||
|
|
bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
|
||
|
|
BIT(u3pll_ctrl[PLL_SEQ_START]));
|
||
|
|
bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
|
||
|
|
BIT(u3pll_ctrl[PLL_RESETB]));
|
||
|
|
|
||
|
|
/* Maximum timeout for PLL reset done */
|
||
|
|
msleep(30);
|
||
|
|
|
||
|
|
ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL],
|
||
|
|
BIT(u3pll_ctrl[PLL_LOCK]));
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg)
|
||
|
|
{
|
||
|
|
int ret = 0;
|
||
|
|
void __iomem *regs = phy_cfg->regs;
|
||
|
|
const u8 *offset;
|
||
|
|
u32 rd_data;
|
||
|
|
|
||
|
|
offset = phy_cfg->offset;
|
||
|
|
|
||
|
|
writel(HSPLL_NDIV_INT_VAL, regs + offset[PLL_NDIV_INT]);
|
||
|
|
writel(HSPLL_NDIV_FRAC_VAL, regs + offset[PLL_NDIV_FRAC]);
|
||
|
|
|
||
|
|
rd_data = readl(regs + offset[PLL_CTRL]);
|
||
|
|
rd_data &= ~(HSPLL_PDIV_MASK << u2pll_ctrl[PLL_PDIV]);
|
||
|
|
rd_data |= (HSPLL_PDIV_VAL << u2pll_ctrl[PLL_PDIV]);
|
||
|
|
writel(rd_data, regs + offset[PLL_CTRL]);
|
||
|
|
|
||
|
|
/* Set Core Ready high */
|
||
|
|
bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
|
||
|
|
BIT(u2phy_ctrl[CORERDY]));
|
||
|
|
|
||
|
|
/* Maximum timeout for Core Ready done */
|
||
|
|
msleep(30);
|
||
|
|
|
||
|
|
bcm_usb_reg32_setbits(regs + offset[PLL_CTRL],
|
||
|
|
BIT(u2pll_ctrl[PLL_RESETB]));
|
||
|
|
bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
|
||
|
|
BIT(u2phy_ctrl[PHY_RESETB]));
|
||
|
|
|
||
|
|
|
||
|
|
rd_data = readl(regs + offset[PHY_CTRL]);
|
||
|
|
rd_data &= ~(PHY_PCTL_MASK << u2phy_ctrl[PHY_PCTL]);
|
||
|
|
rd_data |= (HSPHY_PCTL_VAL << u2phy_ctrl[PHY_PCTL]);
|
||
|
|
writel(rd_data, regs + offset[PHY_CTRL]);
|
||
|
|
|
||
|
|
/* Maximum timeout for PLL reset done */
|
||
|
|
msleep(30);
|
||
|
|
|
||
|
|
ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL],
|
||
|
|
BIT(u2pll_ctrl[PLL_LOCK]));
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm_usb_phy_reset(struct phy *phy)
|
||
|
|
{
|
||
|
|
struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy);
|
||
|
|
void __iomem *regs = phy_cfg->regs;
|
||
|
|
const u8 *offset;
|
||
|
|
|
||
|
|
offset = phy_cfg->offset;
|
||
|
|
|
||
|
|
if (phy_cfg->type == USB_HS_PHY) {
|
||
|
|
bcm_usb_reg32_clrbits(regs + offset[PHY_CTRL],
|
||
|
|
BIT(u2phy_ctrl[CORERDY]));
|
||
|
|
bcm_usb_reg32_setbits(regs + offset[PHY_CTRL],
|
||
|
|
BIT(u2phy_ctrl[CORERDY]));
|
||
|
|
}
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm_usb_phy_init(struct phy *phy)
|
||
|
|
{
|
||
|
|
struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy);
|
||
|
|
int ret = -EINVAL;
|
||
|
|
|
||
|
|
if (phy_cfg->type == USB_SS_PHY)
|
||
|
|
ret = bcm_usb_ss_phy_init(phy_cfg);
|
||
|
|
else if (phy_cfg->type == USB_HS_PHY)
|
||
|
|
ret = bcm_usb_hs_phy_init(phy_cfg);
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static struct phy_ops sr_phy_ops = {
|
||
|
|
.init = bcm_usb_phy_init,
|
||
|
|
.reset = bcm_usb_phy_reset,
|
||
|
|
.owner = THIS_MODULE,
|
||
|
|
};
|
||
|
|
|
||
|
|
static struct phy *bcm_usb_phy_xlate(struct device *dev,
|
||
|
|
struct of_phandle_args *args)
|
||
|
|
{
|
||
|
|
struct bcm_usb_phy_cfg *phy_cfg;
|
||
|
|
int phy_idx;
|
||
|
|
|
||
|
|
phy_cfg = dev_get_drvdata(dev);
|
||
|
|
if (!phy_cfg)
|
||
|
|
return ERR_PTR(-EINVAL);
|
||
|
|
|
||
|
|
if (phy_cfg->version == BCM_SR_USB_COMBO_PHY) {
|
||
|
|
phy_idx = args->args[0];
|
||
|
|
|
||
|
|
if (WARN_ON(phy_idx > 1))
|
||
|
|
return ERR_PTR(-ENODEV);
|
||
|
|
|
||
|
|
return phy_cfg[phy_idx].phy;
|
||
|
|
} else
|
||
|
|
return phy_cfg->phy;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm_usb_phy_create(struct device *dev, struct device_node *node,
|
||
|
|
void __iomem *regs, uint32_t version)
|
||
|
|
{
|
||
|
|
struct bcm_usb_phy_cfg *phy_cfg;
|
||
|
|
int idx;
|
||
|
|
|
||
|
|
if (version == BCM_SR_USB_COMBO_PHY) {
|
||
|
|
phy_cfg = devm_kzalloc(dev, NUM_BCM_SR_USB_COMBO_PHYS *
|
||
|
|
sizeof(struct bcm_usb_phy_cfg),
|
||
|
|
GFP_KERNEL);
|
||
|
|
if (!phy_cfg)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
for (idx = 0; idx < NUM_BCM_SR_USB_COMBO_PHYS; idx++) {
|
||
|
|
phy_cfg[idx].regs = regs;
|
||
|
|
phy_cfg[idx].version = version;
|
||
|
|
if (idx == 0) {
|
||
|
|
phy_cfg[idx].offset = bcm_usb_combo_phy_hs;
|
||
|
|
phy_cfg[idx].type = USB_HS_PHY;
|
||
|
|
} else {
|
||
|
|
phy_cfg[idx].offset = bcm_usb_combo_phy_ss;
|
||
|
|
phy_cfg[idx].type = USB_SS_PHY;
|
||
|
|
}
|
||
|
|
phy_cfg[idx].phy = devm_phy_create(dev, node,
|
||
|
|
&sr_phy_ops);
|
||
|
|
if (IS_ERR(phy_cfg[idx].phy))
|
||
|
|
return PTR_ERR(phy_cfg[idx].phy);
|
||
|
|
|
||
|
|
phy_set_drvdata(phy_cfg[idx].phy, &phy_cfg[idx]);
|
||
|
|
}
|
||
|
|
} else if (version == BCM_SR_USB_HS_PHY) {
|
||
|
|
phy_cfg = devm_kzalloc(dev, sizeof(struct bcm_usb_phy_cfg),
|
||
|
|
GFP_KERNEL);
|
||
|
|
if (!phy_cfg)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
phy_cfg->regs = regs;
|
||
|
|
phy_cfg->version = version;
|
||
|
|
phy_cfg->offset = bcm_usb_hs_phy;
|
||
|
|
phy_cfg->type = USB_HS_PHY;
|
||
|
|
phy_cfg->phy = devm_phy_create(dev, node, &sr_phy_ops);
|
||
|
|
if (IS_ERR(phy_cfg->phy))
|
||
|
|
return PTR_ERR(phy_cfg->phy);
|
||
|
|
|
||
|
|
phy_set_drvdata(phy_cfg->phy, phy_cfg);
|
||
|
|
} else
|
||
|
|
return -ENODEV;
|
||
|
|
|
||
|
|
dev_set_drvdata(dev, phy_cfg);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct of_device_id bcm_usb_phy_of_match[] = {
|
||
|
|
{
|
||
|
|
.compatible = "brcm,sr-usb-combo-phy",
|
||
|
|
.data = (void *)BCM_SR_USB_COMBO_PHY,
|
||
|
|
},
|
||
|
|
{
|
||
|
|
.compatible = "brcm,sr-usb-hs-phy",
|
||
|
|
.data = (void *)BCM_SR_USB_HS_PHY,
|
||
|
|
},
|
||
|
|
{ /* sentinel */ },
|
||
|
|
};
|
||
|
|
MODULE_DEVICE_TABLE(of, bcm_usb_phy_of_match);
|
||
|
|
|
||
|
|
static int bcm_usb_phy_probe(struct platform_device *pdev)
|
||
|
|
{
|
||
|
|
struct device *dev = &pdev->dev;
|
||
|
|
struct device_node *dn = dev->of_node;
|
||
|
|
const struct of_device_id *of_id;
|
||
|
|
struct resource *res;
|
||
|
|
void __iomem *regs;
|
||
|
|
int ret;
|
||
|
|
enum bcm_usb_phy_version version;
|
||
|
|
struct phy_provider *phy_provider;
|
||
|
|
|
||
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||
|
|
regs = devm_ioremap_resource(dev, res);
|
||
|
|
if (IS_ERR(regs))
|
||
|
|
return PTR_ERR(regs);
|
||
|
|
|
||
|
|
of_id = of_match_node(bcm_usb_phy_of_match, dn);
|
||
|
|
if (of_id)
|
||
|
|
version = (enum bcm_usb_phy_version)of_id->data;
|
||
|
|
else
|
||
|
|
return -ENODEV;
|
||
|
|
|
||
|
|
ret = bcm_usb_phy_create(dev, dn, regs, version);
|
||
|
|
if (ret)
|
||
|
|
return ret;
|
||
|
|
|
||
|
|
phy_provider = devm_of_phy_provider_register(dev, bcm_usb_phy_xlate);
|
||
|
|
|
||
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
||
|
|
}
|
||
|
|
|
||
|
|
static struct platform_driver bcm_usb_phy_driver = {
|
||
|
|
.driver = {
|
||
|
|
.name = "phy-bcm-sr-usb",
|
||
|
|
.of_match_table = bcm_usb_phy_of_match,
|
||
|
|
},
|
||
|
|
.probe = bcm_usb_phy_probe,
|
||
|
|
};
|
||
|
|
module_platform_driver(bcm_usb_phy_driver);
|
||
|
|
|
||
|
|
MODULE_AUTHOR("Broadcom");
|
||
|
|
MODULE_DESCRIPTION("Broadcom stingray USB Phy driver");
|
||
|
|
MODULE_LICENSE("GPL v2");
|