linux/linux-5.4.31/arch/unicore32/mm/proc-macros.S

143 lines
3.5 KiB
ArmAsm
Raw Permalink Normal View History

2024-01-30 10:43:28 +00:00
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/arch/unicore32/mm/proc-macros.S
*
* Code specific to PKUnity SoC and UniCore ISA
*
* Copyright (C) 2001-2010 GUAN Xue-tao
*
* We need constants.h for:
* VMA_VM_MM
* VMA_VM_FLAGS
* VM_EXEC
*/
#include <generated/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
/*
* the cache line sizes of the I and D cache are the same
*/
#define CACHE_LINESIZE 32
/*
* This is the maximum size of an area which will be invalidated
* using the single invalidate entry instructions. Anything larger
* than this, and we go for the whole cache.
*
* This value should be chosen such that we choose the cheapest
* alternative.
*/
#ifdef CONFIG_CPU_UCV2
#define MAX_AREA_SIZE 0x800 /* 64 cache line */
#endif
/*
* vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
*/
.macro vma_vm_mm, rd, rn
ldw \rd, [\rn+], #VMA_VM_MM
.endm
/*
* vma_vm_flags - get vma->vm_flags
*/
.macro vma_vm_flags, rd, rn
ldw \rd, [\rn+], #VMA_VM_FLAGS
.endm
.macro tsk_mm, rd, rn
ldw \rd, [\rn+], #TI_TASK
ldw \rd, [\rd+], #TSK_ACTIVE_MM
.endm
/*
* act_mm - get current->active_mm
*/
.macro act_mm, rd
andn \rd, sp, #8128
andn \rd, \rd, #63
ldw \rd, [\rd+], #TI_TASK
ldw \rd, [\rd+], #TSK_ACTIVE_MM
.endm
/*
* mmid - get context id from mm pointer (mm->context.id)
*/
.macro mmid, rd, rn
ldw \rd, [\rn+], #MM_CONTEXT_ID
.endm
/*
* mask_asid - mask the ASID from the context ID
*/
.macro asid, rd, rn
and \rd, \rn, #255
.endm
.macro crval, clear, mmuset, ucset
.word \clear
.word \mmuset
.endm
#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
/*
* va2pa va, pa, tbl, msk, off, err
* This macro is used to translate virtual address to its physical address.
*
* va: virtual address
* pa: physical address, result is stored in this register
* tbl, msk, off: temp registers, will be destroyed
* err: jump to error label if the physical address not exist
* NOTE: all regs must be different
*/
.macro va2pa, va, pa, tbl, msk, off, err=990f
movc \pa, p0.c2, #0
mov \off, \va >> #22 @ off <- index of 1st page table
adr \tbl, 910f @ tbl <- table of 1st page table
900: @ ---- handle 1, 2 page table
add \pa, \pa, #PAGE_OFFSET @ pa <- virt addr of page table
ldw \pa, [\pa+], \off << #2 @ pa <- the content of pt
cand.a \pa, #4 @ test exist bit
beq \err @ if not exist
and \off, \pa, #3 @ off <- the last 2 bits
add \tbl, \tbl, \off << #3 @ cmove table pointer
ldw \msk, [\tbl+], #0 @ get the mask
ldw pc, [\tbl+], #4
930: @ ---- handle 2nd page table
and \pa, \pa, \msk @ pa <- phys addr of 2nd pt
mov \off, \va << #10
cntlo \tbl, \msk @ use tbl as temp reg
mov \off, \off >> \tbl
mov \off, \off >> #2 @ off <- index of 2nd pt
adr \tbl, 920f @ tbl <- table of 2nd pt
b 900b
910: @ 1st level page table
.word 0xfffff000, 930b @ second level page table
.word 0xfffffc00, 930b @ second level large page table
.word 0x00000000, \err @ invalid
.word 0xffc00000, 980f @ super page
920: @ 2nd level page table
.word 0xfffff000, 980f @ page
.word 0xffffc000, 980f @ middle page
.word 0xffff0000, 980f @ large page
.word 0x00000000, \err @ invalid
980:
andn \tbl, \va, \msk
and \pa, \pa, \msk
or \pa, \pa, \tbl
990:
.endm
#endif
.macro dcacheline_flush, addr, t1, t2
mov \t1, \addr << #20
ldw \t2, =_stext @ _stext must ALIGN(4096)
add \t2, \t2, \t1 >> #20
ldw \t1, [\t2+], #0x0000
ldw \t1, [\t2+], #0x1000
ldw \t1, [\t2+], #0x2000
ldw \t1, [\t2+], #0x3000
.endm