linux/linux-5.4.31/arch/powerpc/boot/dts/fsl/t2080rdb.dts

123 lines
3.3 KiB
Plaintext
Raw Permalink Normal View History

2024-01-30 10:43:28 +00:00
/*
* T2080PCIe-RDB Board Device Tree Source
*
* Copyright 2014 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "t208xsi-pre.dtsi"
/include/ "t208xrdb.dtsi"
/ {
model = "fsl,T2080RDB";
compatible = "fsl,T2080RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
};
port2 {
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
};
&soc {
fman@400000 {
ethernet@e0000 {
phy-handle = <&xg_aq1202_phy3>;
phy-connection-type = "xgmii";
};
ethernet@e2000 {
phy-handle = <&xg_aq1202_phy4>;
phy-connection-type = "xgmii";
};
ethernet@e4000 {
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii";
};
ethernet@e6000 {
phy-handle = <&rgmii_phy2>;
phy-connection-type = "rgmii";
};
ethernet@f0000 {
phy-handle = <&xg_cs4315_phy2>;
phy-connection-type = "xgmii";
};
ethernet@f2000 {
phy-handle = <&xg_cs4315_phy1>;
phy-connection-type = "xgmii";
};
mdio@fc000 {
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
rgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
};
mdio@fd000 {
xg_cs4315_phy1: ethernet-phy@c {
compatible = "ethernet-phy-id13e5.1002";
reg = <0xc>;
};
xg_cs4315_phy2: ethernet-phy@d {
compatible = "ethernet-phy-id13e5.1002";
reg = <0xd>;
};
xg_aq1202_phy3: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x0>;
};
xg_aq1202_phy4: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x1>;
};
};
};
};
/include/ "t2080si-post.dtsi"