#include "com_erpc_core.hpp"

#include <QSerialPort>
#include <QSerialPortInfo>

#include "./ui_com_erpc_core.h"

void com_erpc_core::load_default_settings() {
  int index = 0;
  // 波特率配置表
  ui->cb_bandrate->addItem("1200", QSerialPort::Baud1200);
  ui->cb_bandrate->addItem("2400", QSerialPort::Baud2400);
  ui->cb_bandrate->addItem("4800", QSerialPort::Baud4800);
  ui->cb_bandrate->addItem("9600", QSerialPort::Baud9600);
  ui->cb_bandrate->addItem("19200", QSerialPort::Baud19200);
  ui->cb_bandrate->addItem("38400", QSerialPort::Baud38400);
  ui->cb_bandrate->addItem("38400", QSerialPort::Baud57600);
  ui->cb_bandrate->addItem("57600", QSerialPort::Baud57600);
  ui->cb_bandrate->addItem("115200", QSerialPort::Baud115200);
  ui->cb_bandrate->addItem("3000000", 3000000);
  // 设置默认波特率
  index = ui->cb_bandrate->findText("9600");
  ui->cb_bandrate->setCurrentIndex(index);
  // 数据位配置表
  ui->cb_databit->addItem("8", QSerialPort::Data8);
  ui->cb_databit->addItem("7", QSerialPort::Data7);
  ui->cb_databit->addItem("6", QSerialPort::Data6);
  ui->cb_databit->addItem("5", QSerialPort::Data5);
  // 设置默认数据位
  index = ui->cb_databit->findText("8");
  ui->cb_databit->setCurrentIndex(index);
  // 校验位配置表
  ui->cb_parity->addItem("奇校验", QSerialPort::OddParity);
  ui->cb_parity->addItem("偶校验", QSerialPort::EvenParity);
  ui->cb_parity->addItem("无校验", QSerialPort::NoParity);
  // 设置默认校验位
  index = ui->cb_parity->findText("无校验");
  ui->cb_parity->setCurrentIndex(index);
  // 停止位配置表
  ui->cb_stop_bit->addItem("1", QSerialPort::OneStop);
  ui->cb_stop_bit->addItem("1.5", QSerialPort::OneAndHalfStop);
  ui->cb_stop_bit->addItem("2", QSerialPort::TwoStop);
  // 设置默认停止位
  index = ui->cb_stop_bit->findText("1");
  ui->lb_con_sta->setText("未打开");
}
void com_erpc_core::lock_config_ui() {
  ui->cb_com_name->setEnabled(false);
  ui->cb_bandrate->setEnabled(false);
  ui->cb_databit->setEnabled(false);
  ui->cb_parity->setEnabled(false);
  ui->cb_stop_bit->setEnabled(false);
}
void com_erpc_core::unlock_config_ui() {
  ui->cb_com_name->setEnabled(true);
  ui->cb_bandrate->setEnabled(true);
  ui->cb_databit->setEnabled(true);
  ui->cb_stop_bit->setEnabled(true);
  ui->cb_parity->setEnabled(true);
}
/**
 * com port 断开连接回调
 */
void com_erpc_core::com_port_disconnect(QSerialPort::SerialPortError error) {
  if (serial != nullptr) {
    if(error == QSerialPort::ResourceError)
    {
      if(stop_com == nullptr){
        stop_com = new QTimer(this);
        connect(stop_com, &QTimer::timeout, this, &com_erpc_core::close_com_port);
        stop_com->start(10);
      }
    }
  }

}
/**
 * 打开串口
 */
void com_erpc_core::open_com_port() {
  if (serial != nullptr) {
    return;
  }
  //配置串口参数
  serial = new QSerialPort(ui->cb_com_name->currentText());
  serial->setBaudRate(
      ui->cb_bandrate->itemData(ui->cb_bandrate->currentIndex()).toInt());
  QSerialPort::DataBits data_bits = static_cast<QSerialPort::DataBits>(
      ui->cb_databit->itemData(ui->cb_databit->currentIndex()).toInt());
  serial->setDataBits(data_bits);
  QSerialPort::Parity parity = static_cast<QSerialPort::Parity>(
      ui->cb_parity->itemData(ui->cb_parity->currentIndex()).toInt());
  serial->setParity(parity);
  QSerialPort::StopBits stop_bits = static_cast<QSerialPort::StopBits>(
      ui->cb_stop_bit->itemData(ui->cb_stop_bit->currentIndex()).toInt());
  serial->setStopBits(stop_bits);
  //注册断线回调
  connect(serial, &QSerialPort::errorOccurred, this, &com_erpc_core::com_port_disconnect);
  //尝试打开com口
  if (serial->open(QIODevice::ReadWrite)) {
    ui->lb_con_sta->setText("已打开");
    connect(serial, &QSerialPort::readyRead, this, &com_erpc_core::data_append);
    lock_config_ui();
  } else {
    ui->lb_con_sta->setText("打开失败");
    serial->close();
    delete serial;
    serial = nullptr;
    unlock_config_ui();
  }
}
void com_erpc_core::close_com_port() {
  if (serial != nullptr) {
    serial->close();
    delete serial;
    serial = nullptr;
    ui->lb_con_sta->setText("未打开");
    unlock_config_ui();
  }
  if(stop_com!= nullptr){
    stop_com->stop();
    delete stop_com;
    stop_com = nullptr;
  }
}
// 写个扫描串口设备的函数
void com_erpc_core::scan_com_port() {
  //   printf("scan_com_port\n");
  if (serial != nullptr) {
    return;
  }
  ui->cb_com_name->clear();
  foreach (const QSerialPortInfo &info, QSerialPortInfo::availablePorts()) {
    ui->cb_com_name->addItem(info.portName());
  }
}
void com_erpc_core::start_scan_com_port() {
  // 一直扫描
  if (scan_com == nullptr) {
    scan_com = new QTimer(this);
    connect(scan_com, &QTimer::timeout, this, &com_erpc_core::scan_com_port);
    scan_com->start(100);
  }
}
void com_erpc_core::data_append() {
  printf("data_append\n");
  QByteArray data = serial->readAll();
  ui->tb_data_read->append(QString::fromUtf8(data));
}

void com_erpc_core::sipm_cmd_send(int cmd, char *data, int len) {
  CHECK_SERRIAL_IS_OPEN();
  printf("send cmd : %x\n", cmd);
  char send_data[100] = {0};
  char prity = 0;
  send_data[0] = 0xaa;
  send_data[1] = 0x55;
  int temp_len = len + 4;
  send_data[2] = (temp_len >> 8) & 0xff;
  send_data[3] = temp_len & 0xff;
  send_data[4] = cmd;
  for (int i = 2; i < 5; i++) {
    prity += send_data[i];
  }
  for (int i = 0; i < len; i++) {
    send_data[5 + i] = data[i];
    prity += data[i];
  }
  send_data[5 + len] = prity;
  serial->write(send_data, 5 + len + 1);
  serial->flush();
}

void com_erpc_core::sipm_read_gain() {
  CHECK_SERRIAL_IS_OPEN();
  sipm_cmd_send(0x09, nullptr, 0);
}

void com_erpc_core::sipm_read_SN() {
  CHECK_SERRIAL_IS_OPEN();
  sipm_cmd_send(0x02, nullptr, 0);
}

void com_erpc_core::sipm_read_temp() {
  CHECK_SERRIAL_IS_OPEN();
  sipm_cmd_send(0x06, nullptr, 0);
}
void com_erpc_core::sipm_set_gain() {
  CHECK_SERRIAL_IS_OPEN();
  int gain = ui->le_gain->text().toInt();
  char data[2] = {0};
  data[0] = (gain >> 8) & 0xff;
  data[1] = gain & 0xff;
  sipm_cmd_send(0x18, data, 2);
}
com_erpc_core::com_erpc_core(QWidget *parent)
    : QMainWindow(parent), ui(new Ui::com_erpc_core) {
  ui->setupUi(this);
  serial = nullptr;
  load_default_settings();
  scan_com = nullptr;
  stop_com = nullptr;
  start_scan_com_port();
  connect(ui->bt_open_com, &QPushButton::clicked, this,
          &com_erpc_core::open_com_port);
  connect(ui->bt_close_com, &QPushButton::clicked, this,
          &com_erpc_core::close_com_port);
  connect(ui->bt_read_gain, &QPushButton::clicked, this,
          &com_erpc_core::sipm_read_gain);
  connect(ui->bt_read_SN, &QPushButton::clicked, this,
          &com_erpc_core::sipm_read_SN);
  connect(ui->bt_write_gain, &QPushButton::clicked, this,
          &com_erpc_core::sipm_set_gain);
  connect(ui->bt_read_temp, &QPushButton::clicked, this,
          &com_erpc_core::sipm_read_temp);
  extern void com_excute_init();
  com_excute_init();

}

com_erpc_core::~com_erpc_core() { delete ui; }