uboot/arch/arm/include/asm
Alexandre Courbot a38a3c4af4 ARM: tegra: enable GPU DT node when appropriate
T124/210 requires some specific configuration (VPR setup) to
be performed by the bootloader before the GPU can be used.
For this reason, the GPU node in the device tree is disabled
by default. This patch enables the node if U-boot has performed
VPR configuration.

Boards enabled by this patch are T124's Jetson TK1 and Venice2
and T210's P2571.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-08-06 10:50:03 -07:00
..
arch-am33xx omap: SPL boot devices cleanup and completion 2015-07-27 15:02:04 -04:00
arch-armada100
arch-armv7 ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S 2015-07-20 11:44:38 -07:00
arch-bcm281xx usb: gadget: bcm_udc_otg files 2015-07-22 08:57:54 +02:00
arch-bcmcygnus
arch-bcmnsp
arch-ep93xx
arch-exynos arm: exynos: USB3 PHY base definition for Exynos5 SoCs 2015-06-08 15:25:41 +02:00
arch-fsl-lsch3 armv8/lsch3/config: Define USB XHCI controller base address for LS2085A 2015-08-03 12:06:39 -07:00
arch-imx imx: mx6ul: Add i.MX6UL CPU type 2015-08-02 11:05:06 +02:00
arch-lpc32xx lpc32xx: add support for board work_92105 2015-04-10 14:23:39 +02:00
arch-ls102xa include: usb: Move USB controller base address mapping 2015-07-22 08:55:45 +02:00
arch-mvebu
arch-mx5 patch - arm - define SYS_CACHELINE_SIZE for mx5 2015-06-09 12:00:42 +02:00
arch-mx6 imx:mx6ul add dram spl configuration and header file 2015-08-02 11:05:09 +02:00
arch-mx25 i2c, mxc: rework i2c base address names for different SoCs 2015-05-26 14:17:00 +02:00
arch-mx27 i2c, mxc: rework i2c base address names for different SoCs 2015-05-26 14:17:00 +02:00
arch-mx31
arch-mx35
arch-mxs arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode 2015-02-10 12:48:50 +01:00
arch-omap3 omap3: Definitions for SYS_BOOT-based fallback boot device selection 2015-07-27 15:02:07 -04:00
arch-omap4 omap: SPL boot devices cleanup and completion 2015-07-27 15:02:04 -04:00
arch-omap5 omap: SPL boot devices cleanup and completion 2015-07-27 15:02:04 -04:00
arch-orion5x edminiv2: switch to SPL 2015-02-25 07:59:50 +01:00
arch-pxa
arch-rmobile arm: rmobile: alt: Update to QoS revision 0.31 and 0.321 2015-06-01 08:56:34 +09:00
arch-s3c24x0
arch-s5pc1xx
arch-sa1100
arch-spear
arch-stm32f1 ARMv7M: add STM32F1 support 2015-05-28 08:18:24 -04:00
arch-stm32f4 stm32f429: pass the device unique ID in DTB 2015-07-27 15:02:14 -04:00
arch-stv0991 stv0991: configure clock & pad muxing for qspi 2015-07-03 13:50:53 +05:30
arch-sunxi usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB 2015-08-05 17:20:34 +02:00
arch-tegra ARM: tegra: enable GPU DT node when appropriate 2015-08-06 10:50:03 -07:00
arch-tegra20 tegra: Move display controller header into common 2015-05-13 09:24:10 -07:00
arch-tegra30 ARM: ARM720t: remove empty asm/arch/hardware.h 2015-04-23 08:52:27 -04:00
arch-tegra114 ARM: ARM720t: remove empty asm/arch/hardware.h 2015-04-23 08:52:27 -04:00
arch-tegra124 tegra: Add missing tegra124 peripherals 2015-06-09 09:56:14 -07:00
arch-tegra210 Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc. 2015-08-05 15:22:51 -07:00
arch-u8500
arch-vf610 i2c: fix vf610 support 2015-07-10 10:10:48 +02:00
arch-zynqmp ARM: zynqmp: Wire up SATA for the board 2015-07-28 11:56:27 +02:00
armv8 armv8: Fix TCR macros for shareability attribute 2015-07-20 11:44:40 -07:00
imx-common imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL 2015-08-02 11:05:08 +02:00
iproc-common
kona-common
proc-armv
ti-common omap-common: Common boot code OMAP3 support and cleanup 2015-07-27 15:02:03 -04:00
armv7.h virt-dt: Allow reservation of secure region when in a RAM carveout 2015-05-13 09:24:14 -07:00
armv7m.h ARM: Add ARMv7-M support 2015-04-22 12:14:55 -04:00
assembler.h
atomic.h
bitops.h arm: implement find_next_zero_bit function 2015-04-16 09:31:14 +02:00
bootm.h
byteorder.h
cache.h
config.h ARMv8: enable pre-allocation malloc 2015-03-27 16:28:58 +01:00
davinci_rtc.h
dma-mapping.h arm: asm: dma-mapping: added dma_free_coherent API 2015-04-14 05:48:09 +02:00
ehci-omap.h
emif.h am33xx: Re-enable SW levelling for DDR2 2015-06-15 10:57:26 -04:00
errno.h
fsl_secure_boot.h Add bootscript support to esbc_validate. 2015-04-21 10:19:19 -07:00
gic.h
global_data.h omap-common: Common boot code OMAP3 support and cleanup 2015-07-27 15:02:03 -04:00
gpio.h
hardware.h
io.h
linkage.h
mach-types.h davinci: add support for omapl138-lcdk board 2015-04-23 13:58:43 -04:00
macro.h Armv8: Initializing CNTVOFF_EL2 2015-04-16 11:27:15 +02:00
memory.h
omap_common.h omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot 2015-07-27 15:02:06 -04:00
omap_gpio.h
omap_mmc.h
omap_musb.h
pl310.h mx6: Set shared override bit in PL310 AUX_CTRL register 2015-05-15 19:21:24 +02:00
posix_types.h
processor.h
psci.h ARM: Add board-specific initialization hook for PSCI 2015-05-13 09:24:15 -07:00
ptrace.h
sections.h
secure.h
setup.h
spl.h arm: spl: Avoid setting up a duplicate global data structure 2015-03-04 14:55:04 -05:00
string.h
system.h armv8: caches: Added routine to set non cacheable region 2015-07-31 01:38:12 +02:00
types.h include: asm: types: add resource_size_t type 2015-04-14 05:48:09 +02:00
u-boot-arm.h common: Move dram_init() declaration to common location 2015-02-09 15:08:48 +01:00
u-boot.h Revert "break build if it would produce broken binary" 2015-07-07 11:39:36 +02:00
unaligned.h
utils.h