uboot/include/configs
Michal Simek d5dae85f23 fpga: zynq: Add support for loading bitstream
Devcfg device requires to load bitstream in binary format.
But u-boot also has an option for loading bitstream in bit
format. Let's handle both cases by zynqpl driver.
Also add suport for loading partial bitstreams.

The first driver version was done by:
Joe Hershberger <joe.hershberger@ni.com>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>
2013-05-06 10:41:24 +02:00
..
km arm/km: use CONFIG_NAND_ECC_BCH 2013-04-12 21:42:17 +05:30
manroland COMMON: Use __stringify() instead of xstr() 2012-10-15 11:53:47 -07:00
A3000.h
ADS860.h
APC405.h
AR405.h
ASH405.h
Adder.h
AdderUSB.h
Alaska8220.h
B4860QDS.h powerpc/b4860qds: Added Support for B4860QDS 2013-01-30 11:25:11 -06:00
BC3450.h
BSC9131RDB.h
BSC9132QDS.h powerpc/85xx: Add BSC9132QDS support 2013-01-30 11:25:14 -06:00
CANBT.h
CATcenter.h
CMS700.h
CPC45.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
CPCI2DP.h
CPCI405.h 4xx: Fix PCI memory mapping on CPCI405 boards 2012-12-06 15:53:04 +01:00
CPCI405AB.h 4xx: Fix PCI memory mapping on CPCI405 boards 2012-12-06 15:53:04 +01:00
CPCI405DT.h 4xx: Fix PCI memory mapping on CPCI405 boards 2012-12-06 15:53:04 +01:00
CPCI750.h
CPCI4052.h 4xx: Fix PCI memory mapping on CPCI405 boards 2012-12-06 15:53:04 +01:00
CPCIISER4.h
CPU86.h
CPU87.h
CRAYL1.h powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR 2012-12-15 12:28:22 -06:00
CU824.h
DB64360.h
DB64460.h
DP405.h
DU405.h
DU440.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
ELPPC.h
ELPT860.h
EP88x.h
ESTEEM192E.h
EVB64260.h
EXBITGEN.h
FADS823.h
FADS850SAR.h
FADS860T.h
FLAGADM.h
FPS850L.h
FPS860L.h
G2000.h
GEN860T.h powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR 2012-12-15 12:28:22 -06:00
GENIETV.h
HH405.h
HIDDEN_DRAGON.h
HUB405.h
HWW1U1A.h
ICU862.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
IDS8247.h
IP860.h
IPHASE4539.h
ISPAN.h
IVML24.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
IVMS8.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
IceCube.h
JSE.h
KAREF.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
KUP4K.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
KUP4X.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
M5208EVBE.h
M5235EVB.h
M5249EVB.h
M5253DEMO.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
M5253EVBE.h
M5271EVB.h
M5272C3.h
M5275EVB.h
M5282EVB.h
M5329EVB.h
M5373EVB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
M5475EVB.h
M5485EVB.h
M52277EVB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
M53017EVB.h
M54418TWR.h ColdFire: Remove save env in NAND support for M54418TWR board. 2012-10-29 22:08:32 +08:00
M54451EVB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
M54455EVB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MBX.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
MBX860T.h
MERGERBOX.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
METROBOX.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
MHPC.h
MIP405.h
MOUSSE.h
MPC86xADS.h
MPC832XEMDS.h
MPC837XEMDS.h
MPC837XERDB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC885ADS.h
MPC8260ADS.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8266ADS.h
MPC8308RDB.h cleanup: introduce CONFIG_MPC830x 2012-10-23 15:23:25 -05:00
MPC8313ERDB.h Makefile: Change CONFIG_SPL_PAD_TO to image offset 2013-04-12 07:55:06 +02:00
MPC8315ERDB.h
MPC8323ERDB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8349EMDS.h
MPC8349ITX.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8360EMDS.h
MPC8360ERDK.h
MPC8536DS.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8540ADS.h
MPC8541CDS.h
MPC8544DS.h powerpc/mpc8544ds: Add USB controller support for MPC8544DS 2013-01-30 11:25:10 -06:00
MPC8548CDS.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8555CDS.h
MPC8560ADS.h
MPC8568MDS.h
MPC8569MDS.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
MPC8572DS.h powerpc/mpc8572ds: Enable bank interleaving to cs0+cs1 for dual-rank DIMMs 2013-01-30 11:25:09 -06:00
MPC8610HPCD.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8641HPCN.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MUSENKI.h
MVBC_P.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MVBLM7.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MVBLUE.h
MVS1.h
MVSMR.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MigoR.h
NETPHONE.h
NETTA.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
NETTA2.h
NETVIA.h
NSCU.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
NX823.h
OCRTC.h
ORSG.h
P1_P2_RDB.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
P3G4.h
P1010RDB.h powerpc/corenet_ds: move SATA config to board configuration 2012-11-27 18:28:07 -06:00
P1022DS.h powerpc/corenet_ds: move SATA config to board configuration 2012-11-27 18:28:07 -06:00
P1023RDS.h powerpc/qoriq: Move FMAN microcode location 2012-11-27 18:25:55 -06:00
P2020COME.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
P2020DS.h corenet: Disable video on P2020DS 2013-01-30 11:25:16 -06:00
P2041RDB.h powerpc/p2041: set RCW and PBI files for .pbl build or P2041RDB 2013-01-30 11:25:12 -06:00
P3041DS.h powerpc/corenet_ds: move SATA config to board configuration 2012-11-27 18:28:07 -06:00
P4080DS.h powerpc/85xx: move SRIO configuration out of corenet_ds.h 2012-10-22 14:31:13 -05:00
P5020DS.h powerpc/corenet_ds: move SATA config to board configuration 2012-11-27 18:28:07 -06:00
P5040DS.h powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board 2012-11-27 18:28:06 -06:00
PATI.h
PCI405.h
PCI5441.h
PIP405.h
PK1C20.h nios2: remove asm/status_led.h 2012-11-10 19:45:58 +08:00
PLU405.h
PM520.h
PM826.h
PM828.h
PMC405.h
PMC405DE.h
PMC440.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
PN62.h
PPChameleonEVB.h
QS823.h
QS850.h
QS860T.h
R360MPI.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
RBC823.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
RPXClassic.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
RPXlite.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
RPXlite_DW.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
RPXsuper.h
RRvision.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
Rattler.h
SIMPC8313.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
SM850.h
SPD823TS.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
SXNI855T.h
Sandpoint8240.h
Sandpoint8245.h
T4240QDS.h powerpc/t4qds: Add T4QDS board 2012-10-22 15:52:46 -05:00
TASREG.h
TB5200.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
TK885D.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TOP860.h powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR 2012-12-15 12:28:22 -06:00
TOP5200.h
TQM823L.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
TQM823M.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
TQM834x.h
TQM850L.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM850M.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM855L.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM855M.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM860L.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM860M.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM862L.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM862M.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM866M.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM885D.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM5200.h
TQM8260.h
TQM8272.h
Total5200.h
VCMA9.h VCMA9: Enable CONFIG_CMD_NAND_YAFFS 2013-04-12 22:08:55 +02:00
VOH405.h
VOM405.h
VoVPN-GW.h
W7OLMC.h
W7OLMG.h
WUH405.h
Yukon8220.h
ZPC1900.h
ZUMA.h
a3m071.h mpc5200: a4m2k: Implement custom "dynamic" watchdog support 2013-03-09 08:19:21 +01:00
a4m072.h
a320evb.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
ac14xx.h mpc512x: add ifm ac14xx board 2013-03-09 08:22:57 +01:00
acadia.h
actux1.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
actux2.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
actux3.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
actux4.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
adp-ag101.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
adp-ag101p.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
adp-ag102.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
aev.h
afeb9260.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
alpr.h
am335x_evm.h Merge branch 'u-boot/master' into 'u-boot-arm/master' 2013-04-12 22:07:57 +02:00
am3517_crane.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
am3517_evm.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
amcc-common.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
ap325rxa.h
ap_sh4a_4a.h
apx4devkit.h Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' 2013-03-15 15:18:31 +01:00
aria.h mpc512x: use common code for clock setting for all mpc512x boards 2013-03-09 08:22:23 +01:00
armadillo-800eva.h rmobile: armadillo-800eva: Remove CONFIG_SYS_NO_L2CACHE 2012-10-03 02:04:26 +02:00
aspenite.h
astro_mcf5373l.h COMMON: Use __stringify() instead of rest of implementations 2012-10-15 11:53:47 -07:00
at91rm9200ek.h arm: at91/configs: add bootz to configuration 2013-03-12 12:46:24 +01:00
at91sam9m10g45ek.h ARM: at91: change nand flash table 2013-03-12 12:46:54 +01:00
at91sam9rlek.h arm: at91/configs: add bootz to configuration 2013-03-12 12:46:24 +01:00
at91sam9x5ek.h ARM: at91: change nand flash table 2013-03-12 12:46:54 +01:00
at91sam9260ek.h ARM: at91: change nand flash table 2013-03-12 12:46:54 +01:00
at91sam9261ek.h ARM: at91: change nand flash table 2013-03-12 12:46:54 +01:00
at91sam9263ek.h ARM: at91: change nand flash table 2013-03-12 12:46:54 +01:00
atc.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
atngw100.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
atngw100mkii.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
atstk1002.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
atstk1003.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
atstk1004.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
atstk1006.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
balloon3.h serial: pxa: Make use of default_serial_console in serial_pxa 2012-10-15 11:53:48 -07:00
bamboo.h
bct-brettl2.h
beaver.h Tegra: T30: Beaver board support. 2013-04-15 16:13:51 -07:00
bf506f-ezkit.h
bf518f-ezbrd.h
bf525-ucr2.h
bf526-ezbrd.h
bf527-ad7160-eval.h
bf527-ezkit.h
bf527-sdp.h
bf533-ezkit.h
bf533-stamp.h
bf537-minotaur.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
bf537-pnav.h
bf537-srv1.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
bf537-stamp.h
bf538f-ezkit.h
bf548-ezkit.h
bf561-acvilon.h
bf561-ezkit.h
bf609-ezkit.h blackfin: bf60x: add hw watchdog support 2013-03-04 13:42:07 +08:00
bfin_adi_common.h blackfin: bf60x: add board and headers files to support bf609 2013-03-04 13:42:07 +08:00
blackstamp.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
blackvme.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
bluestone.h
br4.h
bubinga.h
ca9x4_ct_vxp.h versatile: board configs: Use buffered writes on flash 2012-10-18 15:59:55 +02:00
calimain.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
cam_enc_4xx.h cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT 2013-04-14 16:07:54 +02:00
canmb.h
canyonlands.h
cardhu.h tegra: spi: rename tegra SPI drivers 2013-03-25 09:56:05 -07:00
charon.h
cm-bf527.h
cm-bf533.h
cm-bf537e.h
cm-bf537u.h
cm-bf548.h
cm-bf561.h
cm41xx.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
cm4008.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
cm5200.h
cm_t35.h cm-t35: add support for loading splash image from NAND 2013-03-22 10:57:00 -04:00
cmi_mpc5xx.h
cobra5272.h
cogent_common.h
cogent_mpc8xx.h
cogent_mpc8260.h
colibri_pxa270.h serial: pxa: Make use of default_serial_console in serial_pxa 2012-10-15 11:53:48 -07:00
colibri_t20_iris.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
coreboot.h x86: config: Init PCI before SPI 2013-04-15 16:26:43 -07:00
corenet_ds.h powerpc/qoriq: Move FMAN microcode location 2012-11-27 18:25:55 -06:00
cpci5200.h
cpu9260.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
cpuat91.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
csb272.h
csb472.h
da830evm.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
da850evm.h da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT 2013-04-14 16:08:08 +02:00
dalmore.h Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore boards 2013-03-25 09:56:08 -07:00
davinci_dm355evm.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_dm355leopard.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_dm365evm.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_dm6467evm.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_dvevm.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_schmoogie.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_sffsdr.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_sonata.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
dbau1x00.h
debris.h
devkit3250.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
devkit8000.h OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define 2013-03-01 12:01:32 -05:00
dig297.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
digsy_mtc.h
dkb.h
dlvision-10g.h
dlvision.h
dnp5370.h
dns325.h
dockstar.h ubifs: Allow ubifsmount volume reference by number 2013-03-04 14:19:56 -05:00
dra7xx_evm.h omap5_uevm.h: Move uEVM-specific choices to omap5_uevm.h 2013-04-08 11:40:56 -04:00
dreamplug.h
dvlhost.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
eXalion.h
ea20.h Merge u-boot/master into u-boot-ti/master 2013-03-11 12:16:13 -04:00
eb_cpu5282.h coldfire: eb_cpu5282: fix: boot from internal flash 2012-12-19 15:51:58 -07:00
eb_cpux9k2.h arm: atmel: cpux9k2: add missing cache configs 2012-11-04 15:56:52 +01:00
ebony.h
eco5pk.h eco5pk: Add new board and default config 2012-10-30 15:28:06 -07:00
ecovec.h
edminiv2.h edminiv2: increase malloc len to 256K 2012-10-03 16:43:13 +05:30
enbw_cmc.h COMMON: Use __stringify() instead of xstr() 2012-10-15 11:53:47 -07:00
ep82xxm.h
ep8248.h
ep8260.h powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR 2012-12-15 12:28:22 -06:00
espt.h
ethernut5.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
exynos5250-dt.h Merge branch 'master' of git://git.denx.de/u-boot-arm into HEAD 2013-04-18 16:16:01 -04:00
favr-32-ezkit.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
flea3.h COMMON: Use __stringify() instead of xstr() 2012-10-15 11:53:47 -07:00
fx12mm.h
galaxy5200.h
gdppc440etx.h
gplugd.h
gr_cpci_ax2000.h
gr_ep2s60.h
gr_xc3s_1500.h
grasshopper.h
grsim.h
grsim_leon2.h
guruplug.h
gw8260.h
h2_p2_dbg_board.h
h2200.h h2200: Add USB CDC ethernet support 2012-12-17 15:38:14 +01:00
hammerhead.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
harmony.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
hawkboard.h spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC. 2012-11-26 15:41:25 -06:00
hermes.h
highbank.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
hmi1001.h
hymod.h
ib62x0.h ubifs: Allow ubifsmount volume reference by number 2013-03-04 14:19:56 -05:00
ibf-dsp561.h
icon.h
iconnect.h ubifs: Allow ubifsmount volume reference by number 2013-03-04 14:19:56 -05:00
idmr.h
igep00x0.h omap3_beagle: Flush UART3 xmit on enable if TEMT is broken 2013-04-08 11:29:05 -04:00
ima3-mx53.h mx5/6: Define default SoC input clock frequencies 2012-10-15 11:54:10 -07:00
imx27lite-common.h COMMON: Use __stringify() instead of xstr() 2012-10-15 11:53:47 -07:00
imx27lite.h
imx31_litekit.h power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER 2012-11-14 11:21:12 +01:00
imx31_phycore.h mx31: Define default SoC input clock frequencies 2012-09-06 14:23:30 +02:00
incaip.h
inka4x0.h
integrator-common.h integrator: enable device tree 2013-04-12 22:25:29 +02:00
integratorap.h integrator: break out common config 2012-09-04 08:51:13 -07:00
integratorcp.h integrator: break out common config 2012-09-04 08:51:13 -07:00
intip.h
io.h
io64.h
iocon.h
ip04.h
ipek01.h
jadecpu.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
jornada.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
jupiter.h
katmai.h
kilauea.h
km82xx.h powerpc/82xx: adapt SDRAM settings for mgcoge3ne 2012-07-31 22:36:38 +02:00
km8360.h powerpc/83xx: use NAND_ECC_BCH for kmcoge5ne 2013-02-15 17:47:20 -06:00
km_kirkwood.h arm/km: add support for kmsuv31 board 2013-04-12 21:42:22 +05:30
korat.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
kvme080.h
kzm9g.h i2c: sh_i2c.c: support I2C2, I2C3 and I2C4 2012-10-16 05:47:20 +02:00
lacie_kw.h ARM: add support for d2 Network v2 2012-10-03 16:43:12 +05:30
linkstation.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
lsxl.h lsxl: unset ncip for rescue mode 2013-01-09 04:12:11 +05:30
luan.h
lubbock.h lcd, pxafb: move the pxafb to drivers/video 2013-03-21 09:38:21 +01:00
lwmon.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
lwmon5.h boards: remove the no longer used CONFIG_EHCI_DCACHE 2012-11-20 00:16:05 +01:00
m28evk.h mxs: Make ehci-mxs multiport capable 2013-03-07 17:22:57 +01:00
magnesium.h
makalu.h
mcc200.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
mcx.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
mecp5123.h mpc512x: use common code for clock setting for all mpc512x boards 2013-03-09 08:22:23 +01:00
mecp5200.h
medcom-wide.h Tegra: Medcom-Wide: Enable NAND and boot script support 2013-04-15 11:01:37 -07:00
meesc.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
microblaze-generic.h microblaze: Remove FSL support from generic board 2013-02-04 12:09:50 +01:00
mimc200.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
mini2440.h ARM : Add support for MINI2440 (s3c2440). 2012-10-03 10:50:27 +02:00
ml507.h
motionpro.h mpc52xx/motionpro: fix monitor size and update default environment 2012-10-02 11:55:45 -07:00
mpc5121-common.h
mpc5121ads.h mpc512x: use common code for clock setting for all mpc512x boards 2013-03-09 08:22:23 +01:00
mpc7448hpc2.h
mpc8308_p1m.h cleanup: introduce CONFIG_MPC830x 2012-10-23 15:23:25 -05:00
mpq101.h
mpr2.h
ms7720se.h
ms7722se.h
ms7750se.h
mt_ventoux.h OMAP3: mt_ventoux: added video support 2012-09-04 17:05:39 -07:00
muas3001.h
mucmc52.h
munices.h
mv-common.h mv-common.h: increase malloc arena to 4MiB 2013-01-09 04:12:11 +05:30
mv88f6281gtw_ge.h
mx1ads.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
mx6_common.h ARM: mx6: use common CPU errata config options 2013-03-07 18:20:37 +01:00
mx6qarm2.h ARM: mx6: use common CPU errata config options 2013-03-07 18:20:37 +01:00
mx6qsabre_common.h mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no arguments 2013-04-13 17:44:37 +02:00
mx6qsabreauto.h mx6qsabre_common: Let mmc partition be board specific 2013-01-28 06:45:18 +01:00
mx6qsabrelite.h mx6qsabrelite: Remove duplicate 'mmc dev' 2013-04-03 11:40:44 +02:00
mx6qsabresd.h mx6qsabresd: Fix booting the kernel from SDHC3 2013-01-13 12:04:47 +01:00
mx23_olinuxino.h mx23_olinuxino: Fix netboot console 2013-04-03 11:28:40 +02:00
mx23evk.h mx23evk: Enable USB support 2013-03-07 17:22:58 +01:00
mx25pdk.h mx25pdk: Enable imxdi RTC 2013-04-03 11:26:12 +02:00
mx28evk.h mx28evk: Introduce a new target for saving env vars to NAND 2013-04-03 10:55:18 +02:00
mx31ads.h power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER 2012-11-14 11:21:12 +01:00
mx31pdk.h mx31pdk: Remove watchdog support 2013-04-12 08:47:42 +02:00
mx35pdk.h mx35pdk: Allow booting of a device tree kernel 2012-12-26 11:58:50 +01:00
mx51_efikamx.h Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged 2012-12-19 13:02:36 -08:00
mx51evk.h mx51evk: Remove unneeded comment 2013-01-05 18:04:47 +01:00
mx53ard.h imx: mx53ard: Add support for NAND Flash 2013-04-12 07:55:04 +02:00
mx53evk.h Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged 2012-12-19 13:02:36 -08:00
mx53loco.h mx53loco: Add support to dynamically choose between fdt use or not 2013-01-13 11:53:45 +01:00
mx53smd.h configs: Fix usage of mmc rescan 2012-10-23 08:33:17 -07:00
neo.h
nhk8815.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
nios2-generic.h nios2: remove asm/status_led.h 2012-11-10 19:45:58 +08:00
nitrogen6x.h Add Boundary Devices Nitrogen6X boards 2013-03-13 09:04:24 +01:00
nokia_rx51.h RX-51: Add support for bootmenu 2013-03-29 09:35:34 +01:00
o2d.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o2d300.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o2dnt-common.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o2dnt2.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o2i.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o2mnt.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o3dnt.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
ocotea.h
omap3_beagle.h omap3_beagle: Enable CONFIG_CMD_BOOTZ 2013-03-11 11:06:09 -04:00
omap3_evm.h omap3_evm: Let CONFIG_EFI_PARTITION be set for SPL 2012-12-13 13:58:27 -07:00
omap3_evm_common.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
omap3_evm_quick_mmc.h
omap3_evm_quick_nand.h spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC. 2012-11-26 15:41:25 -06:00
omap3_logic.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
omap3_mvblx.h omap3: mvblx: pass FPGA version to the kernel 2013-02-18 13:51:20 -05:00
omap3_overo.h spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC. 2012-11-26 15:41:25 -06:00
omap3_pandora.h ubifs: Allow ubifsmount volume reference by number 2013-03-04 14:19:56 -05:00
omap3_sdp3430.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
omap3_zoom1.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
omap3_zoom2.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
omap4_common.h ARM: OMAP4/5: Make bootz as the default boot command 2013-04-08 11:29:05 -04:00
omap4_panda.h omap4_panda: remove CONFIG_PANDA, not used 2012-10-01 10:10:33 -07:00
omap4_sdp4430.h
omap5_common.h omap5_common.h: Switch to ext4 2013-04-12 15:29:23 -04:00
omap5_uevm.h omap5_uevm: Correct to 2MiB aligned partitions on eMMC 2013-04-10 15:10:10 -04:00
omap730.h
omap730p2.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
omap1510.h
omap1510inn.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
omap2420h4.h omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ 2013-04-08 11:29:05 -04:00
omap5912osk.h omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ 2013-04-10 16:03:02 -04:00
openrd.h
openrisc-generic.h
origen.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
otc570.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
p1_p2_rdb_pc.h Makefile: Change CONFIG_SPL_PAD_TO to image offset 2013-04-12 07:55:06 +02:00
p3mx.h
p3p440.h
palmld.h lcd, pxafb: move the pxafb to drivers/video 2013-03-21 09:38:21 +01:00
palmtc.h lcd, pxafb: move the pxafb to drivers/video 2013-03-21 09:38:21 +01:00
paz00.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
pb1x00.h
pcm030.h
pcm051.h am33xx: Add required includes to some omap/am33xx code 2013-03-24 12:49:11 -04:00
pcs440ep.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
pdm360ng.h mpc512x: use common code for clock setting for all mpc512x boards 2013-03-09 08:22:23 +01:00
pdnb3.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
pf5200.h
plutux.h Tegra: Plutux: Enable NAND and boot script support 2013-04-15 11:01:37 -07:00
pm9g45.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
pm9261.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
pm9263.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
pogo_e02.h
ppmc7xx.h
ppmc8260.h
pr1.h
pxa-common.h
pxa255_idp.h lcd, pxafb: move the pxafb to drivers/video 2013-03-21 09:38:21 +01:00
qemu-mips.h MIPS: qemu_mips.h: cleanup coding style and checkpatch.pl issues 2012-10-16 15:02:08 +02:00
qemu-mips64.h MIPS: add board qemu-mips64 support 2012-10-16 15:02:08 +02:00
qi_lb60.h MIPS: factor out endianess flag handling to arch config.mk 2012-08-24 00:34:43 +02:00
qong.h mx31/mx35/mx51/mx53/mx6: add watchdog 2013-01-13 11:39:57 +01:00
quad100hd.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
quantum.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
r0p7734.h
r2dplus.h
r7780mp.h
rd6281a.h
redwood.h
rpi_b.h ARM: bcm2835: fix get_timer() to return ms 2013-04-04 08:14:54 +02:00
rsdproto.h
rsk7203.h
rsk7264.h
rsk7269.h
s5p_goni.h power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER 2012-11-14 11:21:12 +01:00
s5pc210_universal.h Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged 2012-12-19 13:02:36 -08:00
sacsng.h
sandbox.h sandbox: config: Enable sandbox command 2013-03-04 14:19:56 -05:00
sbc35_a9g20.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
sbc405.h
sbc8349.h
sbc8548.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
sbc8641d.h
sc3.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
sc_sps_1.h mxs: Make ehci-mxs multiport capable 2013-03-07 17:22:57 +01:00
scb9328.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
seaboard.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
sequoia.h boards: remove the no longer used CONFIG_EHCI_DCACHE 2012-11-20 00:16:05 +01:00
sh7752evb.h sh: add support for sh7752evb board 2012-12-20 13:20:17 +09:00
sh7757lcr.h
sh7763rdp.h
sh7785lcr.h
sheevaplug.h
shmin.h
smdk2410.h dm: Move s3c24xx USB driver to a proper place 2012-10-18 06:54:18 +02:00
smdk5250.h SMDK5250: config: Add configuration file for SMDK5250 board 2012-12-26 19:26:25 +09:00
smdkc100.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
smdkv310.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
snapper9260.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
snow.h EXYNOS5: Snow: Add a configuration file 2013-03-12 19:24:24 +09:00
snowball.h u8500: Separating mmc config parameters from driver 2012-09-01 14:58:20 +02:00
socfpga_cyclone5.h arm: move C runtime setup code in crt0.S 2013-01-08 22:14:50 +01:00
socrates.h
sorcery.h
spc1920.h
spear-common.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
spear3xx_evb.h cleanup/SPEAr: Define configuration flags more elegantly 2012-07-07 14:07:42 +02:00
spear6xx_evb.h cleanup/SPEAr: Define configuration flags more elegantly 2012-07-07 14:07:42 +02:00
spieval.h
stamp9g20.h Fixes the crippled console output on PortuxG20. 2012-09-04 22:06:19 +02:00
stxgp3.h
stxssa.h
stxxtc.h
suvd3.h powerpc/83xx/km: add MV88E6122 switch support for kmvect1 2013-02-15 17:47:20 -06:00
svm_sc8xx.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
t3corp.h
t4qds.h powerpc/t4240qds: Update IFC timing for NOR flash 2013-01-30 11:25:09 -06:00
taihu.h
taishan.h
tam3517-common.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
tb0229.h
tcm-bf518.h
tcm-bf537.h
tec.h Tegra: TEC: Enable boot script support 2013-04-15 11:01:37 -07:00
tegra-common-post.h tegra114: add SPI driver 2013-03-25 09:56:07 -07:00
tegra-common.h Tegra: enable verify support for the crc32 command 2013-04-15 11:01:37 -07:00
tegra20-common.h ARM: tegra: enable workaround for ARM erratum 716044 2013-03-22 16:45:25 +01:00
tegra30-common.h ARM: tegra: make bounce buffer option common 2013-03-14 11:06:44 -07:00
tegra114-common.h Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board 2013-03-14 11:06:42 -07:00
ti814x_evm.h ti814x_evm: add ti814x evm board support 2013-03-24 12:49:12 -04:00
tk71.h Kirkwood: Add support for Ka-Ro TK71 2012-07-07 14:07:33 +02:00
tnetv107x_evm.h dm: wdt: arm: Move tnetv107x into drivers/watchdog/ 2012-10-18 06:52:02 +02:00
tny_a9260.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
top9000.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
trats.h spl:falcon:trats: Fix SPL image size computing. 2013-03-29 11:42:35 +09:00
tricorder.h tricorder: enable hw assisted BCH8 in SPL and u-boot 2013-04-08 11:29:05 -04:00
trimslice.h tegra: spi: rename tegra SPI drivers 2013-03-25 09:56:05 -07:00
trizepsiv.h mmc: pxa: Flip over the remaining boards to pxa_mmc_generic 2012-10-22 02:56:25 -05:00
tt01.h power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER 2012-11-14 11:21:12 +01:00
tuxx1.h powerpc/83xx/km: add support for kmopti2 board 2013-02-15 17:47:21 -06:00
twister.h OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define 2013-03-01 12:01:32 -05:00
tx25.h nand: mxc: Switch NAND SPL to generic SPL 2013-04-12 07:55:07 +02:00
u8500_href.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
uc100.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
uc101.h
utx8245.h powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR 2012-12-15 12:28:22 -06:00
v5fx30teval.h
v37.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
v38b.h
vct.h boards: remove the no longer used CONFIG_EHCI_DCACHE 2012-11-20 00:16:05 +01:00
ve8313.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
ventana.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
versatile.h versatile: board configs: Use buffered writes on flash 2012-10-18 15:59:55 +02:00
virtlab2.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
vision2.h Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged 2012-12-19 13:02:36 -08:00
vl_ma2sc.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
vme8349.h
vpac270.h serial: pxa: Make use of default_serial_console in serial_pxa 2012-10-15 11:53:48 -07:00
walnut.h
wandboard.h wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM 2013-04-03 11:40:44 +02:00
whistler.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
wireless_space.h ARM: lacie_kw: add support for WIRELESS_SPACE 2013-01-09 04:12:10 +05:30
woodburn.h MX35: add support for woodburn board 2012-10-26 16:27:59 +02:00
woodburn_common.h Merge branch 'master' of git://git.denx.de/u-boot into master 2012-12-08 12:02:45 +01:00
woodburn_sd.h MX35: add support for woodburn board 2012-10-26 16:27:59 +02:00
x600.h ubifs: Allow ubifsmount volume reference by number 2013-03-04 14:19:56 -05:00
xaeniax.h serial: pxa: Make use of default_serial_console in serial_pxa 2012-10-15 11:53:48 -07:00
xilinx-ppc.h ml507: Fix Xilinx uartlite driver hang 2012-10-08 11:12:07 -07:00
xilinx-ppc405-generic.h
xilinx-ppc405.h
xilinx-ppc440-generic.h
xilinx-ppc440.h
xpedite517x.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
xpedite520x.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
xpedite537x.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
xpedite550x.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
xpedite1000.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
yosemite.h
yucca.h
zeus.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
zipitz2.h lcd, pxafb: move the pxafb to drivers/video 2013-03-21 09:38:21 +01:00
zmx25.h ehci-mxc: Make i.MX25 EHCI configurable 2012-11-16 09:16:45 +01:00
zynq.h fpga: zynq: Add support for loading bitstream 2013-05-06 10:41:24 +02:00