How to use U-boot on Solid-run mx6 hummingboard
-----------------------------------------------
- Build U-boot for hummingboard:
$ make mrproper
$ make mx6cuboxi_defconfig
$ make
This will generate the SPL image called SPL and the u-boot.img.
- Flash the SPL image into the SD card:
sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
- Flash the u-boot.img image into the SD card:
sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
- Insert the SD card in the hummingboard, power it up and U-boot messages
should come up.
cfdcc5f781