uboot/include/configs
Wang Huan c8a7d9dab0 arm: ls102xa: Add basic support for LS1021ATWR board
LS102xA is an ARMv7 implementation. This patch is to add
basic support for LS1021ATWR board.
 One DDR controller
 DUART1 is used as the console

For the detail board information, please refer to README.

Signed-off-by: Chen Lu <chen.lu@freescale.com>
Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Signed-off-by: Alison Wang <alison.wang@freescale.com>
2014-09-08 10:30:35 -07:00
..
km kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
manroland
A3000.h
APC405.h
AR405.h
ASH405.h
B4860QDS.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
BC3450.h
BSC9131RDB.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
BSC9132QDS.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
C29XPCIE.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
CATcenter.h
CMS700.h
CPC45.h
CPCI2DP.h
CPCI405.h
CPCI405AB.h
CPCI405DT.h
CPCI750.h
CPCI4052.h
CPCIISER4.h
CPU86.h
CPU87.h
CRAYL1.h
CU824.h
DB64360.h
DB64460.h
DP405.h
DU405.h
DU440.h
ELPPC.h stdio: Pass device pointer to stdio methods 2014-07-23 14:07:23 +01:00
ELPT860.h
ESTEEM192E.h
FPS850L.h
FPS860L.h
G2000.h
HH405.h
HUB405.h
HWW1U1A.h
ICU862.h
IDS8247.h
IP860.h
IPHASE4539.h
IVML24.h
IVMS8.h
IceCube.h
JSE.h
KAREF.h
KUP4K.h
KUP4X.h
M5208EVBE.h
M5235EVB.h
M5249EVB.h
M5253DEMO.h
M5253EVBE.h
M5272C3.h
M5275EVB.h
M5282EVB.h
M5329EVB.h
M5373EVB.h
M5475EVB.h
M5485EVB.h
M52277EVB.h
M53017EVB.h
M54418TWR.h
M54451EVB.h
M54455EVB.h
MERGERBOX.h lib: rand: introduce new configs: CONFIG_LIB_RAND and CONFIG_LIB_HW_RAND 2014-03-28 15:06:31 -04:00
METROBOX.h
MHPC.h stdio: Pass device pointer to stdio methods 2014-07-23 14:07:23 +01:00
MIP405.h
MPC832XEMDS.h
MPC837XEMDS.h
MPC837XERDB.h
MPC8266ADS.h
MPC8308RDB.h
MPC8313ERDB.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
MPC8315ERDB.h nand_spl: remove MPC8315ERDB_NAND support 2014-06-05 17:01:59 -04:00
MPC8323ERDB.h
MPC8349EMDS.h
MPC8349ITX.h
MPC8360EMDS.h
MPC8360ERDK.h
MPC8536DS.h nand_spl: remove MPC8536DS support 2014-06-05 17:01:58 -04:00
MPC8540ADS.h
MPC8541CDS.h
MPC8544DS.h
MPC8548CDS.h
MPC8555CDS.h
MPC8560ADS.h
MPC8568MDS.h
MPC8569MDS.h nand_spl: remove MPC8569MDS_NAND support 2014-06-05 17:01:58 -04:00
MPC8572DS.h nand_spl: remove MPC8572DS_NAND support 2014-06-05 17:01:58 -04:00
MPC8610HPCD.h
MPC8641HPCN.h powerpc/freescale: Convert selected boards to generic board architecture 2014-05-13 08:31:22 -07:00
MUSENKI.h
MVBC_P.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
MVBLM7.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
MVBLUE.h
MVSMR.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
MigoR.h
NETVIA.h
NSCU.h
OCRTC.h
P1_P2_RDB.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
P3G4.h
P1010RDB.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
P1022DS.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
P1023RDB.h powerpc/mpc85xx:Update MONITOR_LEN for 768KB u-boot size 2014-04-22 17:58:51 -07:00
P2020COME.h
P2020DS.h powerpc/mpc85xx:Update MONITOR_LEN for 768KB u-boot size 2014-04-22 17:58:51 -07:00
P2041RDB.h powerpc/srio-pcie-boot: Adjust addresses for SRIO/PCIE boot 2014-05-16 16:29:16 -05:00
P3041DS.h
P4080DS.h
P5020DS.h
P5040DS.h
PATI.h
PCI405.h
PIP405.h
PLU405.h
PM520.h
PM826.h
PM828.h
PMC405.h
PMC405DE.h
PMC440.h
PPChameleonEVB.h
R360MPI.h
RRvision.h
SM850.h
SPD823TS.h
Sandpoint8240.h
Sandpoint8245.h
T104xRDB.h powerpc/t104xrdb: support deep sleep in SPI/SD boot 2014-08-12 12:26:47 -07:00
T208xQDS.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
T208xRDB.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
T1040QDS.h fsl/diu: ch7301 encoder split off from t1040qds/diu.c 2014-08-12 12:26:46 -07:00
T4240EMU.h mpc85xx: configs: remove c=ffe from default environment 2014-05-16 16:27:05 -05:00
T4240QDS.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
T4240RDB.h powerpc/85xx: Add T4160RDB board support 2014-05-16 16:24:26 -05:00
TASREG.h
TB5200.h
TK885D.h
TOP860.h
TOP5200.h
TQM823L.h
TQM823M.h
TQM834x.h
TQM850L.h
TQM850M.h
TQM855L.h
TQM855M.h
TQM860L.h
TQM860M.h
TQM862L.h
TQM862M.h
TQM866M.h
TQM885D.h
TQM5200.h
TQM8260.h
TQM8272.h
Total5200.h
VCMA9.h
VOH405.h
VOM405.h
VoVPN-GW.h
W7OLMC.h
W7OLMG.h
WUH405.h
ZUMA.h
a3m071.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
a4m072.h
a320evb.h
ac14xx.h
acadia.h
adp-ag101.h
adp-ag101p.h
adp-ag102.h
aev.h
afeb9260.h
alpr.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
alt.h rmobile: kconfig: move board select menu and common settings 2014-08-30 21:19:32 -04:00
am43xx_evm.h board/ti/am43xx: add support for parallel NAND 2014-08-25 10:48:12 -04:00
am335x_evm.h board/ti/am335x: update configs for parallel NAND 2014-08-25 08:52:34 -04:00
am335x_igep0033.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
am3517_crane.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
am3517_evm.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
amcc-common.h
ap325rxa.h
ap_sh4a_4a.h
apf27.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
apx4devkit.h
arcangel4-be.h
arcangel4.h
aria.h
aristainetos.h arm, imx6: add aristainetos board 2014-07-23 12:31:34 +02:00
armadillo-800eva.h rmobile: kconfig: move board select menu and common settings 2014-08-30 21:19:32 -04:00
arndale.h ARM: enable ARMv7 virt support for the Arndale board 2014-08-30 07:46:38 -04:00
aspenite.h
astro_mcf5373l.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
at91rm9200ek.h
at91sam9m10g45ek.h env_fat: use get_device_and_partition() during env save and load 2014-07-07 19:43:01 -04:00
at91sam9n12ek.h ARM: at91: remove redundant ARM926EJS definition in board config files 2014-05-27 00:10:53 +02:00
at91sam9rlek.h
at91sam9x5ek.h at91: remove redundant AT91FAMILY definition in board config file 2014-05-27 00:10:52 +02:00
at91sam9260ek.h
at91sam9261ek.h
at91sam9263ek.h
atc.h
atngw100.h
atngw100mkii.h atngw100mkii: add missing CONFIG_SYS_TEXT_BASE 2014-05-26 21:23:54 +02:00
atstk1002.h
atstk1003.h
atstk1004.h
atstk1006.h
axs101.h axs101: bump DDR size from 256 to 512 Mb 2014-04-25 18:00:23 +04:00
balloon3.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
bamboo.h
bcm28155_ap.h arm: bcm281xx: Add CONFIG_SYS_GENERIC_BOARD 2014-06-10 11:15:15 +02:00
bcm_ep_board.h arm: add Cygnus and NSP boards 2014-08-30 07:46:40 -04:00
bct-brettl2.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
beaver.h ARM: tegra: enable DFU too 2014-08-18 16:57:03 -07:00
bf506f-ezkit.h blackfin: convert blackfin board_f and board_r to use generic board init functions 2014-08-07 15:15:14 +08:00
bf518f-ezbrd.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
bf525-ucr2.h
bf526-ezbrd.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
bf527-ad7160-eval.h
bf527-ezkit.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
bf527-sdp.h
bf533-ezkit.h
bf533-stamp.h blackfin: convert blackfin board_f and board_r to use generic board init functions 2014-08-07 15:15:14 +08:00
bf537-minotaur.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
bf537-pnav.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
bf537-srv1.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
bf537-stamp.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
bf538f-ezkit.h blackfin: convert blackfin board_f and board_r to use generic board init functions 2014-08-07 15:15:14 +08:00
bf548-ezkit.h
bf561-acvilon.h
bf561-ezkit.h
bf609-ezkit.h
bfin_adi_common.h lib: rand: introduce new configs: CONFIG_LIB_RAND and CONFIG_LIB_HW_RAND 2014-03-28 15:06:31 -04:00
bg0900.h
blackstamp.h
blackvme.h
bluestone.h
br4.h
bubinga.h
bur_am335x_common.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
calimain.h arm, calimain: Add CONFIG_SYS_GENERIC_BOARD 2014-07-05 09:30:49 +02:00
cam_enc_4xx.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
canmb.h
canyonlands.h
cardhu.h ARM: tegra: use a CPU freq that all SKUs can support 2014-05-13 10:41:32 -07:00
cgtqmx6eval.h
charon.h
cm-bf527.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
cm-bf533.h
cm-bf537e.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
cm-bf537u.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
cm-bf548.h
cm-bf561.h
cm41xx.h
cm4008.h
cm5200.h
cm_t35.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
cm_t54.h cm-t54: convert to generic board 2014-08-25 10:48:13 -04:00
cm_t335.h ARM: omap: move board specific NAND configs out from ti_armv7_common.h 2014-07-25 16:26:12 -04:00
cmi_mpc5xx.h
cobra5272.h
cogent_common.h
cogent_mpc8xx.h
cogent_mpc8260.h
colibri_pxa270.h
colibri_t20_iris.h
colibri_t30.h ARM: tegra: add Colibri T30 board support 2014-08-18 16:59:04 -07:00
controlcenterd.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
coreboot.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
corenet_ds.h powerpc/srio-pcie-boot: Adjust addresses for SRIO/PCIE boot 2014-05-16 16:29:16 -05:00
corvus.h at91: remove redundant AT91FAMILY definition in board config file 2014-05-27 00:10:52 +02:00
cpci5200.h
cpu9260.h at91: remove redundant AT91FAMILY definition in board config file 2014-05-27 00:10:52 +02:00
cpuat91.h
csb272.h
csb472.h
da830evm.h i2c, davinci: convert driver to new mutlibus/mutliadapter framework 2014-04-17 17:24:38 -04:00
da850evm.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
dalmore.h
davinci_dm355evm.h i2c, davinci: convert driver to new mutlibus/mutliadapter framework 2014-04-17 17:24:38 -04:00
davinci_dm355leopard.h i2c, davinci: convert driver to new mutlibus/mutliadapter framework 2014-04-17 17:24:38 -04:00
davinci_dm365evm.h i2c, davinci: convert driver to new mutlibus/mutliadapter framework 2014-04-17 17:24:38 -04:00
davinci_dm6467evm.h mtd: nand: davinci: add header file for driver definitions 2014-06-19 17:53:58 -04:00
davinci_dvevm.h i2c, davinci: convert driver to new mutlibus/mutliadapter framework 2014-04-17 17:24:38 -04:00
davinci_schmoogie.h i2c, davinci: convert driver to new mutlibus/mutliadapter framework 2014-04-17 17:24:38 -04:00
davinci_sffsdr.h i2c, davinci: convert driver to new mutlibus/mutliadapter framework 2014-04-17 17:24:38 -04:00
davinci_sonata.h i2c, davinci: convert driver to new mutlibus/mutliadapter framework 2014-04-17 17:24:38 -04:00
dbau1x00.h
devkit3250.h
devkit8000.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
dig297.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
digsy_mtc.h
dkb.h
dlvision-10g.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
dlvision.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
dnp5370.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
dns325.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
dockstar.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
dra7xx_evm.h ARM: DRA: Enable VTT regulator 2014-08-25 10:48:13 -04:00
draco.h siemens, draco: add new target 2014-05-13 19:43:01 -04:00
dreamplug.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
duovero.h omap4: duovero: Add Gumstix DuoVero machine. 2014-05-23 19:40:05 -04:00
dxr2.h siemens: change LED indication in DFU mode 2014-05-13 19:43:00 -04:00
eXalion.h
ea20.h i2c, davinci: convert driver to new mutlibus/mutliadapter framework 2014-04-17 17:24:38 -04:00
eb_cpu5282.h
eb_cpux9k2.h
ebony.h
eco5pk.h
ecovec.h
edb93xx.h arm: ep9315: Return back Cirrus Logic EDB9315A board support 2014-07-04 23:45:48 +02:00
edminiv2.h orion5x: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
embestmx6boards.h embestmx6boards: convert to generic board 2014-07-23 12:25:40 +02:00
enbw_cmc.h i2c, davinci: convert driver to new mutlibus/mutliadapter framework 2014-04-17 17:24:38 -04:00
ep82xxm.h
ep8260.h
espt.h
ethernut5.h arm: ethernut5: convert to generic board 2014-06-14 18:13:15 +02:00
exynos4-dt.h samsung: dfu: Provide correct Vendor and Product IDs for UMS gadget 2014-08-20 13:10:32 +02:00
exynos5-dt.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
exynos5250-dt.h Exynos: Split 5250 and 5420 memory bank configuration 2014-06-23 08:45:45 +09:00
exynos5420.h Exynos: Split 5250 and 5420 memory bank configuration 2014-06-23 08:45:45 +09:00
favr-32-ezkit.h
flea3.h
fx12mm.h
galaxy5200.h
gdppc440etx.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
goflexhome.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
gplugd.h
gr_cpci_ax2000.h
gr_ep2s60.h
gr_xc3s_1500.h
grasshopper.h
grsim.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
grsim_leon2.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
guruplug.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
gw8260.h
gw_ventana.h imx: ventana: add econfig command 2014-08-20 13:08:37 +02:00
h2200.h h2200: Disable SHA256 on FIT images 2014-07-22 07:44:26 -04:00
hammerhead.h
harmony.h
hawkboard.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
hermes.h
highbank.h ARM: highbank: convert to generic board 2014-05-25 15:18:26 +02:00
hmi1001.h
hummingboard.h hummingboard: Convert to generic board 2014-04-28 10:45:56 +02:00
hymod.h
ib62x0.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
ibf-dsp561.h
icon.h
iconnect.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
ids8313.h mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board 2014-06-23 09:11:41 -04:00
ima3-mx53.h
imx6_spl.h ARM: mx6: Enable Thumb build for SPL 2014-08-20 12:23:45 +02:00
imx27lite-common.h
imx27lite.h
imx31_litekit.h
imx31_phycore.h
inka4x0.h
integrator-common.h integrator: switch to generic board 2014-07-05 09:32:59 +02:00
integratorap.h
integratorcp.h
intip.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
io.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
io64.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
iocon.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
ip04.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
ipam390.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
ipek01.h
jadecpu.h stdio: Pass device pointer to stdio methods 2014-07-23 14:07:23 +01:00
jetson-tk1.h ARM: tegra: enable DFU too 2014-08-18 16:57:03 -07:00
jornada.h
jupiter.h
k2e_evm.h board: k2e-evm: add board support 2014-07-25 16:26:11 -04:00
k2hk_evm.h configs: k2hk_evm: config: add common EVM configuration header 2014-07-25 16:26:10 -04:00
katmai.h
kilauea.h
km82xx.h
km8360.h
km_kirkwood.h arm/km: disable subpage write for km_kirkwood_pci and kmsuv31 target 2014-08-30 07:46:41 -04:00
kmp204x.h
koelsch.h rmobile: kconfig: move board select menu and common settings 2014-08-30 21:19:32 -04:00
korat.h
ks2_evm.h ARM: keystone2: clock: add K2E clock support 2014-07-25 16:26:11 -04:00
kwb.h Add board_mmc_init(...) function for init mmc1 only 2014-05-23 11:15:53 +03:00
kzm9g.h rmobile: kconfig: move board select menu and common settings 2014-08-30 21:19:32 -04:00
lacie_kw.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
lager.h rmobile: kconfig: move board select menu and common settings 2014-08-30 21:19:32 -04:00
lp8x4x.h
ls1021aqds.h arm: ls102xa: Add basic support for LS1021AQDS board 2014-09-08 10:30:34 -07:00
ls1021atwr.h arm: ls102xa: Add basic support for LS1021ATWR board 2014-09-08 10:30:35 -07:00
ls2085a_common.h ARMv8/ls2085a_emu: Add LS2085A emulator and simulator board support 2014-07-04 19:48:41 +02:00
ls2085a_emu.h ARMv8/ls2085a_emu: Add LS2085A emulator and simulator board support 2014-07-04 19:48:41 +02:00
ls2085a_simu.h ARMv8/ls2085a_emu: Add LS2085A emulator and simulator board support 2014-07-04 19:48:41 +02:00
lsxl.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
luan.h
lwmon.h
lwmon5.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
m28evk.h ARM: m28evk: Update default environment 2014-07-09 14:54:04 +02:00
m53evk.h Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-08-11 10:21:03 +02:00
magnesium.h
makalu.h
malta.h MIPS: Malta: convert to generic board 2014-04-20 13:16:43 +02:00
mcc200.h
mcx.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
mecp5123.h
mecp5200.h
medcom-wide.h
meesc.h
microblaze-generic.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
mimc200.h
ml507.h
motionpro.h
mpc5121-common.h
mpc5121ads.h
mpc7448hpc2.h
mpc8308_p1m.h
mpr2.h
ms7720se.h
ms7722se.h
ms7750se.h
mt_ventoux.h fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK 2014-05-20 15:23:46 +02:00
muas3001.h
mucmc52.h
munices.h
mv-common.h
mv88f6281gtw_ge.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
mx6_common.h mx6: add support of multi-processor command 2014-08-20 11:52:54 +02:00
mx6qarm2.h
mx6qsabreauto.h mx6sabreauto: Add the mx6dual-lite variant 2014-05-28 17:23:24 +02:00
mx6sabre_common.h mx6sabre_common: Convert to generic board 2014-04-28 10:45:55 +02:00
mx6sabresd.h mx6sabred: Add PFUZE100 PMIC support 2014-05-28 17:35:39 +02:00
mx6slevk.h mx6slevk: Add SPI NOR flash support 2014-04-28 14:00:16 +02:00
mx6sxsabresd.h mx6sxsabresd: Add Ethernet support 2014-08-20 13:15:23 +02:00
mx23_olinuxino.h
mx23evk.h
mx25pdk.h mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD 2014-06-26 10:17:19 +02:00
mx28evk.h mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected 2014-06-17 16:39:09 +02:00
mx31ads.h
mx31pdk.h Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-08-11 10:21:03 +02:00
mx35pdk.h power: Rename CONFIG_PMIC_... to CONFIG_POWER_... 2014-05-28 10:58:18 +09:00
mx51_efikamx.h
mx51evk.h
mx53ard.h mx53ard: Convert to generic board 2014-04-28 10:45:55 +02:00
mx53evk.h Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' 2014-06-02 08:43:48 +02:00
mx53loco.h Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' 2014-06-02 08:43:48 +02:00
mx53smd.h mx53smd: Convert to generic board 2014-04-28 10:45:55 +02:00
mxs.h Merge branch 'master' of git://git.denx.de/u-boot-arm 2014-08-11 10:21:03 +02:00
neo.h board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards 2014-07-25 10:55:49 +02:00
nhk8815.h nomadik: kconfig: move board select menu and common settings 2014-08-30 21:22:00 -04:00
nios2-generic.h nios2: rebase nios2-generic board to 3c120 reference design 2014-08-30 17:48:43 +08:00
nitrogen6x.h ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD 2014-04-28 11:05:42 +02:00
nokia_rx51.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
o2d.h
o2d300.h
o2dnt-common.h
o2dnt2.h
o2i.h
o2mnt.h
o3dnt.h
ocotea.h
omap3_beagle.h Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' 2014-07-28 12:26:21 +02:00
omap3_evm.h
omap3_evm_common.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
omap3_evm_quick_mmc.h
omap3_evm_quick_nand.h
omap3_igep00x0.h ARM: omap: move board specific NAND configs out from ti_armv7_common.h 2014-07-25 16:26:12 -04:00
omap3_logic.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
omap3_mvblx.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
omap3_overo.h ARM: omap: move board specific NAND configs out from ti_armv7_common.h 2014-07-25 16:26:12 -04:00
omap3_pandora.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
omap3_sdp3430.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
omap3_zoom1.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
omap4_panda.h
omap4_sdp4430.h
omap5_uevm.h TI:omap5: Move CONFIG_ENV_SIZE to board config files 2014-04-17 14:39:54 -04:00
openrd.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
openrisc-generic.h
origen.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
otc570.h
p1_p2_rdb_pc.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
p1_twr.h powerpc/mpc85xx:Update MONITOR_LEN for 768KB u-boot size 2014-04-22 17:58:51 -07:00
p3mx.h
p3p440.h
palmld.h
palmtc.h
palmtreo680.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
paz00.h
pb1x00.h
pcm030.h
pcm051.h pcm051: use ti_am335x_common.h config 2014-08-25 14:19:13 -04:00
pcs440ep.h
pdm360ng.h
peach-pit.h Exynos5420: Introduce support for the Peach-Pit board 2014-06-23 08:45:44 +09:00
pengwyn.h ARM: omap: move board specific NAND configs out from ti_armv7_common.h 2014-07-25 16:26:12 -04:00
pepper.h am335x: pepper: Add Gumstix Pepper AM335x-based machine 2014-05-13 19:47:51 -04:00
pf5200.h
plutux.h
pm9g45.h
pm9261.h
pm9263.h
pogo_e02.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
ppmc7xx.h
ppmc8260.h
pr1.h
pxa-common.h
pxa255_idp.h
pxm2.h siemens: cosmetic: remove unused and rename defines 2014-05-13 19:42:59 -04:00
qemu-mips.h
qemu-mips64.h
qemu-ppce500.h PPC 85xx QEMU: Make a generic board file 2014-05-13 08:26:56 -07:00
qong.h
r0p7734.h
r2dplus.h
r7780mp.h
rd6281a.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
redwood.h
rpi_b.h ARM: rpi_b: use new generic $bootcmd 2014-08-09 11:17:04 -04:00
rsk7203.h
rsk7264.h
rsk7269.h
rut.h
s5p_goni.h samsung: s5p_goni: fix: Add missing definitions for G_DNL_UMS gadget 2014-08-28 13:47:34 -04:00
s5pc210_universal.h S5P: Exynos: Config: Enable GPIO CMD config 2014-05-13 15:20:38 +09:00
sacsng.h lib: rand: introduce new configs: CONFIG_LIB_RAND and CONFIG_LIB_HW_RAND 2014-03-28 15:06:31 -04:00
sama5d3_xplained.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
sama5d3xek.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
sandbox.h sandbox: config: Enable pre-relocation malloc() 2014-07-23 14:06:17 +01:00
sansa_fuze_plus.h
sbc35_a9g20.h
sbc405.h
sbc8349.h
sbc8548.h
sbc8641d.h
sc3.h
sc_sps_1.h
scb9328.h
seaboard.h
sequoia.h
sh7752evb.h
sh7753evb.h
sh7757lcr.h
sh7763rdp.h
sh7785lcr.h
sheevaplug.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
shmin.h
siemens-am33x-common.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
smdk2410.h
smdk5250.h Exynos5: config: Enable FIT 2014-05-13 09:00:22 +09:00
smdk5420.h Exynos5420: Introduce support for the Peach-Pit board 2014-06-23 08:45:44 +09:00
smdkc100.h
smdkv310.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
snapper9260.h
snow.h Exynos5: config: Enable FIT 2014-05-13 09:00:22 +09:00
snowball.h
socfpga_cyclone5.h socfpga: initialize designware ethernet 2014-08-30 07:46:38 -04:00
socrates.h
spear-common.h
spear3xx_evb.h
spear6xx_evb.h
stamp9g20.h
stxgp3.h
stxssa.h
sun4i.h sun4i: add USB EHCI settings 2014-07-31 15:37:23 +02:00
sun5i.h sun5i: add USB EHCI settings 2014-07-31 15:37:23 +02:00
sun7i.h sunxi: HYP/non-sec: configure CNTFRQ on all CPUs 2014-07-31 15:37:24 +02:00
sunxi-common.h sunxi: Add environment settings to make extlinux.conf booting work 2014-08-12 08:42:32 +02:00
suvd3.h
t3corp.h
t4qds.h powerpc/freescale: Convert selected boards to generic board architecture 2014-05-13 08:31:22 -07:00
taihu.h
taishan.h
tam3517-common.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
tao3530.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
taurus.h
tb100.h tb100 - add Abilis TB100 board 2014-05-27 18:22:24 +04:00
tcm-bf518.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
tcm-bf537.h blackfin: replace bfin_gen_rand_mac() with eth_random_addr() 2014-05-12 15:19:46 -04:00
tec-ng.h
tec.h
tegra-common-post.h ARM: tegra: use new generic $bootcmd 2014-08-09 11:17:04 -04:00
tegra-common-usb-gadget.h ARM: tegra: enable DFU too 2014-08-18 16:57:03 -07:00
tegra-common.h tegra: kconfig: move board select menu and common settings 2014-08-30 21:19:32 -04:00
tegra20-common.h
tegra30-common.h
tegra114-common.h
tegra124-common.h
ti814x_evm.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
ti816x_evm.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
ti_am335x_common.h arm:am33xx: Rework s_init and add board_early_init_f 2014-06-06 17:46:14 -04:00
ti_armv7_common.h TI:armv7: Change CONFIG_SPL_STACK to not be CONFIG_SYS_INIT_SP_ADDR 2014-08-25 08:52:34 -04:00
ti_omap3_common.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
ti_omap4_common.h omap4: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
ti_omap5_common.h omap5: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
titanium.h
tk71.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
tnetv107x_evm.h
tny_a9260.h
top9000.h
tqma6.h Add TQ Systems TQMa6 board support 2014-07-23 12:31:42 +02:00
trats.h ext4: trats: trats2: Modify dfu_alt_info's file names to have absolute path 2014-08-09 11:17:02 -04:00
trats2.h ext4: trats: trats2: Modify dfu_alt_info's file names to have absolute path 2014-08-09 11:17:02 -04:00
tricorder.h omap3: kconfig: move board select menu and common settings 2014-08-30 21:21:59 -04:00
trimslice.h
trizepsiv.h
tseries.h tseries: Set CONFIG_ENV_IS_NOWHERE for SPL+NAND 2014-08-25 08:52:34 -04:00
tt01.h
tuxx1.h
twister.h
tx25.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
u8500_href.h
uc100.h
uc101.h
udoo.h udoo: Convert to generic board 2014-04-28 10:45:56 +02:00
usb_a9263.h
utx8245.h
v5fx30teval.h
v38b.h
vct.h
ve8313.h
venice2.h ARM: tegra: enable DFU too 2014-08-18 16:57:03 -07:00
ventana.h
versatile.h
vexpress_aemv8a.h vexpress_aemv8a.h: Enable CONFIG_CMD_BOOTI and CONFIG_CMD_UNZIP 2014-08-30 07:46:41 -04:00
vexpress_ca5x2.h
vexpress_ca9x4.h
vexpress_ca15_tc2.h
vexpress_common.h
vf610twr.h arm: vf610: Add QSPI support for VF610TWR 2014-06-09 09:18:15 +02:00
virtlab2.h
vision2.h
vl_ma2sc.h ARM: at91: remove redundant ARM926EJS definition in board config files 2014-05-27 00:10:53 +02:00
vme8349.h
vpac270.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
walnut.h
wandboard.h wandboard: Pass video kernel arguments for HDMI and LCD 2014-05-09 15:21:25 +02:00
whistler.h
wireless_space.h kirkwood: kconfig: refactor Kconfig and defconfig 2014-08-30 21:21:21 -04:00
woodburn.h
woodburn_common.h power: Rename CONFIG_PMIC_... to CONFIG_POWER_... 2014-05-28 10:58:18 +09:00
woodburn_sd.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
x600.h include: remove CONFIG_SPL/CONFIG_TPL definition in config headers 2014-07-30 14:42:03 -04:00
xaeniax.h
xfi3.h
xilinx-ppc.h
xilinx-ppc405-generic.h
xilinx-ppc405.h
xilinx-ppc440-generic.h
xilinx-ppc440.h
xpedite517x.h
xpedite520x.h
xpedite537x.h
xpedite550x.h
xpedite1000.h
yosemite.h
yucca.h
zeus.h
zipitz2.h
zmx25.h
zynq-common.h zynq: kconfig: move board select menu and common settings 2014-08-30 21:19:32 -04:00
zynq_microzed.h
zynq_zc70x.h ARM: zynq: Added USB host support for zynq boards 2014-05-14 07:43:35 +02:00
zynq_zc770.h
zynq_zed.h ARM: zynq: Added USB host support for zynq boards 2014-05-14 07:43:35 +02:00