uboot

History

Peter Tyser 983eb9d162 pci: Clean up PCI info when CONFIG_PCI_SCAN_SHOW This change does the following: - Removes the printing of the PCI interrupt line value. This is normally set to 0 by U-Boot on bootup and is rarely used during everyday operation. - Prints out the PCI function number of a device. Previously a device with multiple functions would be printed identically 2 times, which is generally confusing. For example, on an Intel 2 port gigabit Ethernet card the following was displayed: ... 04 01 8086 1010 0200 00 04 01 8086 1010 0200 00 ... - Prints a text description of each device's PCI class instead of the raw PCI class code. The textual description makes it much easier to determine what devices are installed on a PCI bus. - Changes the general formatting of the PCI device output. Previous output: PCIE1: connected as Root Complex 04 01 8086 1010 0200 00 04 01 8086 1010 0200 00 03 00 10b5 8112 0604 00 02 01 10b5 8518 0604 00 02 02 10b5 8518 0604 00 08 00 1957 0040 0b20 00 07 00 10b5 8518 0604 00 09 00 10b5 8112 0604 00 07 01 10b5 8518 0604 00 07 02 10b5 8518 0604 00 06 00 10b5 8518 0604 00 02 03 10b5 8518 0604 00 01 00 10b5 8518 0604 00 PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex 0d 00 1957 0040 0b20 00 PCIE2: Bus 0c - 0d Updated output: PCIE1: connected as Root Complex 04:01.0 - 8086:1010 - Network controller 04:01.1 - 8086:1010 - Network controller 03:00.0 - 10b5:8112 - Bridge device 02:01.0 - 10b5:8518 - Bridge device 02:02.0 - 10b5:8518 - Bridge device 08:00.0 - 1957:0040 - Processor 07:00.0 - 10b5:8518 - Bridge device 09:00.0 - 10b5:8112 - Bridge device 07:01.0 - 10b5:8518 - Bridge device 07:02.0 - 10b5:8518 - Bridge device 06:00.0 - 10b5:8518 - Bridge device 02:03.0 - 10b5:8518 - Bridge device 01:00.0 - 10b5:8518 - Bridge device PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex 0d:00.0 - 1957:0040 - Processor PCIE2: Bus 0c - 0d Signed-off-by: Peter Tyser <ptyser@xes-inc.com>		2010-11-14 23:46:46 +01:00
..
asm-generic	x86: Fix support for booting bzImage	2010-05-06 00:17:01 +02:00
bedbug	Make sure that argv[] argument pointers are not modified.	2010-07-04 23:55:42 +02:00
configs	powerpc/p4080ds: Move ICS refclk define into P4080DS.h	2010-11-12 09:45:15 -06:00
cramfs	…
galileo	…
jffs2	fdt_support: add partitions fixup in mtd node	2010-03-21 22:44:59 +01:00
linux	Coding Style cleanup	2010-10-27 22:48:30 +02:00
lzma	Rename lib_generic/ to lib/	2010-04-13 09:13:04 +02:00
mtd	cfi_flash: Simplify dynamic flash bank number detection	2010-09-20 15:08:51 +02:00
pcmcia	…
u-boot	Rename lib_generic/ to lib/	2010-04-13 09:13:04 +02:00
usb	Fix building for 83xx boards with USB support	2010-10-21 20:00:41 +02:00
.gitignore	update include/asm/ gitignore after move	2010-05-07 00:17:30 +02:00
74xx_7xx.h	…
ACEX1K.h	fpga: Remove relocation fixups	2009-10-03 10:17:56 +02:00
MCD_dma.h	…
MCD_progCheck.h	…
MCD_tasksInit.h	…
SA-1100.h	…
_exports.h	Remove support for CONFIG_HAS_UID and "forceenv" command	2010-09-19 19:29:47 +02:00
addr_map.h	…
ahci.h	…
ali512x.h	…
altera.h	fpga: Remove relocation fixups	2009-10-03 10:17:56 +02:00
amba_clcd.h	video: add amba-clcd prime-cell	2010-01-27 21:23:14 +01:00
ambapp.h	…
api_public.h	…
arm925t.h	…
armcoremodule.h	…
asm-offsets.h	Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value	2010-10-26 21:05:30 +02:00
at45.h	…
at91rm9200_i2c.h	…
at91rm9200_net.h	…
ata.h	…
atmel_lcdc.h	…
bcd.h	…
bcm5221.h	…
bmp_layout.h	…
bus_vcxk.h	…
bzlib.h	…
circbuf.h	…
clps7111.h	…
command.h	Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC	2010-10-29 21:32:07 +02:00
common.h	Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value	2010-10-26 21:05:30 +02:00
commproc.h	CCM: remove code for yet another corpse	2010-10-06 22:22:26 +02:00
compiler.h	include/compiler.h: remove uint typedef for __MACH__	2010-10-06 23:09:42 +02:00
config_cmd_all.h	rarp: Condtionally compile rarp support	2010-10-11 23:00:29 -07:00
config_cmd_default.h	Add 'editenv' command	2009-10-27 20:58:25 +01:00
config_defaults.h	Add support for operating system OSE	2010-09-28 14:42:26 +02:00
crc.h	…
da9030.h	…
dataflash.h	…
ddr_spd.h	powerpc/8xxx: Enable DDR3 RDIMM support	2010-07-26 13:16:10 -05:00
div64.h	…
dm9000.h	…
dm9161.h	…
dp83848.h	…
ds1722.h	Misc ds1722 fixups	2009-09-04 21:54:52 +02:00
ds4510.h	…
dtt.h	…
e500.h	ppc/p4080: Determine various chip frequencies on CoreNet platforms	2009-09-24 12:05:29 -05:00
elf.h	…
environment.h	New implementation for internal handling of environment variables.	2010-09-19 19:29:48 +02:00
errno.h	Add basic errno support.	2010-09-19 19:29:47 +02:00
exports.h	Remove support for CONFIG_HAS_UID and "forceenv" command	2010-09-19 19:29:47 +02:00
ext2fs.h	…
fat.h	VFAT: fix processing of scattered long file name entries	2010-10-12 22:39:14 +02:00
fdc.h	…
fdt.h	…
fdt_support.h	FDT: Add fixup support for multiple banks of memory	2010-10-18 22:50:53 +02:00
fis.h	…
flash.h	cfi_flash: Simplify dynamic flash bank number detection	2010-09-20 15:08:51 +02:00
fpga.h	FPGA: add support for downloading Lattice bitstream	2010-10-13 18:09:31 +02:00
fsl_diu_fb.h	fsl_diu_fb: further refactoring of FSL DIU code	2010-09-25 13:10:03 +02:00
fsl_esdhc.h	ppc/85xx: PIO Support for FSL eSDHC Controller Driver	2010-04-23 21:02:30 -05:00
fsl_nfc.h	Add MX25 support to nand_spl fsl nfc driver	2010-01-27 14:22:41 -06:00
fsl_pmic.h	MX: Added Freescale Power Management Driver	2010-05-05 09:48:41 +02:00
hush.h	…
hwconfig.h	…
i2c.h	fsl_i2c: Added a callpoint for i2c_board_late_init	2010-04-19 07:46:35 +02:00
i8042.h	…
ide.h	mucmc52, uc101: delete ata@3a00 node, if no CF card is detected	2009-09-25 01:22:13 +02:00
image.h	boot: change some arch ifdefs to feature ifdefs	2010-10-18 22:53:32 +02:00
iomux.h	…
ioports.h	…
keyboard.h	…
kgdb.h	Make sure that argv[] argument pointers are not modified.	2010-07-04 23:55:42 +02:00
ks8721.h	Add support for Eukrea CPUAT91 SBC	2009-10-13 06:17:35 -05:00
lattice.h	Coding Style cleanup	2010-10-27 22:48:30 +02:00
lcd.h	atmel_lcd: Allow contrast polarity to be either positive or negative	2010-09-25 15:22:51 +02:00
lcdvideo.h	…
led-display.h	led_display: remove unused DISPLAY_MARK define	2010-10-21 22:25:04 +02:00
lh7a40x.h	…
lh7a400.h	…
lh7a404.h	…
libata.h	…
libfdt.h	…
libfdt_env.h	…
linux_logo.h	…
lmb.h	lmb: only force on arches that use it	2010-01-21 22:26:00 +01:00
logbuff.h	…
lpd7a400_cpld.h	…
lxt971a.h	…
lynxkdi.h	…
malloc.h	…
mb862xx.h	video: mb862xx: improve board-specific Lime configuration	2009-10-31 12:13:28 +01:00
mc13892.h	mx51evk: Fix 2 hours reset issue	2010-10-28 11:42:34 +02:00
mg_disk.h	…
mii_phy.h	…
miiphy.h	miiphy: constify device name	2010-08-09 11:52:29 -07:00
mk48t59.h	…
mmc.h	AT91: MCI: add SD/MMC driver using mmc framework	2010-09-03 11:19:01 +02:00
mpc5xx.h	…
mpc5xxx.h	A4M072: Added support for the board.	2010-10-12 22:44:33 +02:00
mpc5xxx_sdma.h	…
mpc8xx.h	…
mpc8xx_irq.h	…
mpc83xx.h	83xx: Remove warmboot parameter from PCI init functions	2010-09-23 21:14:42 +02:00
mpc85xx.h	83xx/85xx/86xx: LBC register cleanup	2010-07-16 10:55:09 -05:00
mpc86xx.h	mpc86xx: set the DDR BATs after calculating true DDR size	2010-03-30 10:50:22 -05:00
mpc106.h	…
mpc824x.h	…
mpc8220.h	…
mpc8260.h	…
mpc8260_irq.h	…
mtd_node.h	fdt_support: add partitions fixup in mtd node	2010-03-21 22:44:59 +01:00
mxc_gpio.h	Use common function to set GPIOs for MX3 and MX5	2010-09-29 11:24:30 +02:00
nand.h	nand erase: .spread, .part, .chip subcommands	2010-10-11 15:10:17 -05:00
net.h	Integrate USB gadget layer and USB CDC driver layer	2010-09-20 21:57:16 +02:00
netdev.h	net: Move Emaclite to NET_MULTI	2010-10-11 23:07:04 -07:00
nios2-epcs.h	…
nios2-io.h	…
nios2-yanu.h	nios2: Added support to YANU UART	2010-03-21 22:44:42 +01:00
nios2.h	…
nomadik.h	include/nomadik.h: add physical address for cldc	2010-01-27 21:23:23 +01:00
ns7520_eth.h	…
ns9750_bbus.h	…
ns9750_eth.h	…
ns9750_mem.h	…
ns9750_ser.h	…
ns9750_sys.h	…
ns16550.h	Move arch/ppc to arch/powerpc	2010-04-21 23:42:38 +02:00
ns87308.h	…
onenand_uboot.h	Flex-OneNAND driver support	2009-11-13 16:56:18 -06:00
part.h	…
pc_keyb.h	…
pca953x.h	…
pca9564.h	Prepare v2010.03-rc1	2010-03-12 23:06:04 +01:00
pci.h	pci: Clean up PCI info when CONFIG_PCI_SCAN_SHOW	2010-11-14 23:46:46 +01:00
pci_ids.h	video: sm501: add support for SM501 chips on PCI bus	2010-06-14 12:29:26 +02:00
pcmcia.h	…
post.h	Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC	2010-10-29 21:32:07 +02:00
ppc_asm.tmpl	powerpc: fix wrong comment at GOT definitions	2010-06-29 23:03:40 +02:00
ppc_defs.h	…
ps2mult.h	…
radeon.h	…
reiserfs.h	…
rtc.h	…
s6e63d6.h	…
s_record.h	…
sata.h	…
scsi.h	…
search.h	Add hash table support as base for new environment code	2010-09-19 19:29:47 +02:00
sed156x.h	…
sed13806.h	…
serial.h	Merge branch 'master' of git://git.denx.de/u-boot-samsung	2010-09-08 00:03:22 +02:00
sha1.h	…
sha256.h	…
sja1000.h	Add minimal SJA1000 header for basic CAN mode	2009-11-17 13:19:58 +01:00
sm501.h	…
smiLynxEM.h	…
spartan2.h	fpga: Remove relocation fixups	2009-10-03 10:17:56 +02:00
spartan3.h	add block write function to spartan3 slave serial load	2010-03-24 11:08:43 -05:00
spd.h	…
spd_sdram.h	…
spi.h	…
spi_flash.h	spi_flash.h: pull in linux/types.h for u## types	2009-11-24 23:40:39 +01:00
status_led.h	CCM: remove code for yet another corpse	2010-10-06 22:22:26 +02:00
stdio_dev.h	…
stratixII.h	fpga: Remove relocation fixups	2009-10-03 10:17:56 +02:00
sym53c8xx.h	…
systemace.h	…
timestamp.h	…
tsec.h	tsec: Add TSEC_FIBER flag	2010-01-31 22:34:34 -08:00
tsi108.h	…
tsi148.h	…
twl4030.h	ARMV7: OMAP: add convenience function to set TWL4030 regulator voltages	2010-09-08 14:50:23 -04:00
twl6030.h	ARMV7: Add support for the TWL6030 I2C power chip used in OMAP4 systems	2010-08-05 10:11:30 -04:00
tws.h	…
ubi_uboot.h	UBI: Fix problem in UBI/Linux "compatibility layer"	2010-05-19 10:57:24 +02:00
universe.h	…
usb.h	musb: MSC host support for AM35x	2010-08-12 16:40:00 +02:00
usb_cdc_acm.h	…
usb_defs.h	…
usbdescriptors.h	USB add macros for debugging usb device setup.	2009-12-20 12:47:37 +01:00
usbdevice.h	USB add macros for debugging usb device setup.	2009-12-20 12:47:37 +01:00
version.h	…
vfd_logo.h	…
video.h	…
video_ad7176.h	…
video_ad7177.h	…
video_ad7179.h	…
video_easylogo.h	…
video_fb.h	video: cleanup comments in cfb_console.c and video_fb.h	2010-07-17 00:05:14 +02:00
video_font.h	…
video_logo.h	…
virtex2.h	fpga: Remove relocation fixups	2009-10-03 10:17:56 +02:00
vsc7385.h	…
vxworks.h	Make sure that argv[] argument pointers are not modified.	2010-07-04 23:55:42 +02:00
w83c553f.h	…
watchdog.h	nios: remove nios-32 arch	2010-05-28 10:56:04 -04:00
xilinx.h	add block write function to spartan3 slave serial load	2010-03-24 11:08:43 -05:00
xyzModem.h	…