Xie Xiaobo 8d172c0f0d mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS ... MPC8349E rev3.1 have new spridr,and PVR value, The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM. Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>		2007-03-02 11:05:54 -06:00
..
A3000.h	…
ADCIOP.h	…
ADNPESC1.h	…
ADNPESC1_base_32.h	…
ADS860.h	…
AMX860.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
AP1000.h	Support passing of OF flat trees to the kernel.	2005-10-13 01:45:54 +02:00
APC405.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
AR405.h	…
ASH405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
Adder.h	Add support for Adder boards with 16MB SDRAM;	2006-03-12 01:43:03 +01:00
Alaska8220.h	Add support for multiple PHYs.	2005-10-28 22:30:33 +02:00
AmigaOneG3SE.h	…
B2.h	…
BAB7xx.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
BC3450.h	Coding Style cleanup	2006-05-03 01:24:04 +02:00
BMW.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
CANBT.h	…
CATcenter.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
CCM.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
CMS700.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
CPC45.h	…
CPCI2DP.h	PMC405 and CPCI405: Moved configuration of pci resources into config file.	2006-01-18 20:03:15 +01:00
CPCI405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
CPCI405AB.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
CPCI405DT.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
CPCI440.h	Fix build problem with CPCI440	2006-09-07 12:48:49 +02:00
CPCI750.h	README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE	2006-10-28 02:28:02 +02:00
CPCI4052.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
CPCIISER4.h	…
CPU86.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
CPU87.h	Code cleanup	2006-08-27 18:10:01 +02:00
CRAYL1.h	…
CU824.h	…
DASA_SIM.h	…
DB64360.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
DB64460.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
DK1C20.h	…
DK1C20_safe_32.h	…
DK1C20_standard_32.h	…
DK1S10.h	…
DK1S10_mtx_ldk_20.h	…
DK1S10_safe_32.h	…
DK1S10_standard_32.h	…
DP405.h	…
DU405.h	…
EB+MCF-EV123.h	Minor code cleanup.	2006-06-10 22:00:40 +02:00
ELPPC.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
ELPT860.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
EP1C20.h	Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards	2006-06-08 13:37:39 -04:00
EP1S10.h	Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards	2006-06-08 13:37:39 -04:00
EP1S40.h	Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards	2006-06-08 13:37:39 -04:00
EP88x.h	Add support for EmbeddedPlanet EP88x boards	2006-03-12 23:17:31 +01:00
ERIC.h	…
ESTEEM192E.h	…
ETX094.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
EVB64260.h	…
EXBITGEN.h	…
FADS823.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
FADS850SAR.h	…
FADS860T.h	…
FLAGADM.h	…
FPS850L.h	…
FPS860L.h	…
G2000.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
GEN860T.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
GENIETV.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
GTH.h	…
HH405.h	Merge the new NAND code (testing-NAND brach); see doc/README.nand	2006-03-06 11:25:22 +01:00
HIDDEN_DRAGON.h	…
HMI10.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
HUB405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
IAD210.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
ICU862.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
IDS8247.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
IP860.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
IPHASE4539.h	…
ISPAN.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
IVML24.h	…
IVMS8.h	…
IceCube.h	[PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.	2006-11-28 17:55:49 +01:00
JSE.h	Fix device partition intialization for SystemACE disks.	2005-10-05 00:25:17 +02:00
KAREF.h	README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE	2006-10-28 02:28:02 +02:00
KUP4K.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
KUP4X.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
LANTEC.h	…
M5271EVB.h	Enable autoboot for M5271EVB board.	2006-05-17 12:16:26 +02:00
M5272C3.h	…
M5282EVB.h	…
MBX.h	…
MBX860T.h	…
METROBOX.h	README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE	2006-10-28 02:28:02 +02:00
MHPC.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
MIP405.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
ML2.h	…
MOUSSE.h	…
MPC86xADS.h	Switch MPC86xADS and MPC885ADS boards to use cpuclk environment	2006-03-12 01:55:43 +01:00
MPC832XEMDS.h	mpc83xx: Add support for the MPC832XEMDS board	2007-03-02 11:05:53 -06:00
MPC885ADS.h	Switch MPC86xADS and MPC885ADS boards to use cpuclk environment	2006-03-12 01:55:43 +01:00
MPC8260ADS.h	…
MPC8266ADS.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
MPC8349EMDS.h	mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS	2007-03-02 11:05:54 -06:00
MPC8349ITX.h	mpc83xx: Add support for the MPC8349E-mITX-GP	2007-03-02 11:05:54 -06:00
MPC8360EMDS.h	mpc83xx: Fix the LAW1/3 bug	2007-03-02 11:05:54 -06:00
MPC8540ADS.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
MPC8540EVAL.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
MPC8541CDS.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
MPC8548CDS.h	Merge with /home/wd/git/u-boot/master	2006-10-24 17:08:31 +02:00
MPC8555CDS.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
MPC8560ADS.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
MPC8641HPCN.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
MUSENKI.h	…
MVBLUE.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
MVS1.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
NC650.h	Update for NC650 board. Add NC650 based CP850 configuration.	2006-04-19 11:52:46 +02:00
NETPHONE.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
NETTA.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
NETTA2.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
NETVIA.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
NSCU.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
NX823.h	…
OCRTC.h	…
ORSG.h	…
OXC.h	…
P3G4.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
PATI.h	…
PCI405.h	…
PCI5441.h	…
PCIPPC2.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
PCIPPC6.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
PIP405.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
PK1C20.h	Update PK1C20 board	2006-06-08 12:03:21 -04:00
PLU405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
PM520.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
PM826.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
PM828.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
PM854.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
PM856.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
PMC405.h	PMC405 and CPCI405: Moved configuration of pci resources into config file.	2006-01-18 20:03:15 +01:00
PN62.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
PPChameleonEVB.h	Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)	2006-03-31 14:32:07 +02:00
QS823.h	…
QS850.h	…
QS860T.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
R360MPI.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
RBC823.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
RPXClassic.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
RPXlite.h	RPXlite configuration fixes	2006-03-12 01:48:55 +01:00
RPXlite_DW.h	Add support for Lite5200B board.	2006-03-17 11:42:53 +01:00
RPXsuper.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
RRvision.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
Rattler.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
SBC8540.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
SBC8560.h	…
SCM.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
SL8245.h	…
SM850.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
SPD823TS.h	…
SX1.h	…
SXNI855T.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
Sandpoint8240.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
Sandpoint8245.h	…
TASREG.h	…
TB5200.h	* Cleanup TQM5200 board configurations:	2006-07-21 11:16:34 +02:00
TOP860.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
TOP5200.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
TQM85xx.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM823L.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM823M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM834x.h	mpc83xx: Update 83xx to use fsl_i2c.c	2006-11-03 19:42:23 -06:00
TQM850L.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM850M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM855L.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM855M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM860L.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM860M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM862L.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM862M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM866M.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM885D.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM5200.h	Adjusted default environment for cam5200 board.	2007-01-10 16:51:05 +01:00
TQM8260.h	Enable commandline editing and hush shell on all TQM boards.	2006-10-28 02:29:14 +02:00
TQM8272.h	Minor code cleanup.	2006-12-24 01:42:57 +01:00
Total5200.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
VCMA9.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
VOH405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
VOM405.h	New PPC 405EP board added: CMS700	2005-11-15 10:35:59 +01:00
VoVPN-GW.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
W7OLMC.h	…
W7OLMG.h	…
WUH405.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
XPEDITE1K.h	…
Yukon8220.h	Add support for multiple PHYs.	2005-10-28 22:30:33 +02:00
ZPC1900.h	Memory configuration changes for ZPC.1900 board	2006-03-12 01:45:44 +01:00
ZUMA.h	…
adsvix.h	…
aev.h	* Cleanup TQM5200 board configurations:	2006-07-21 11:16:34 +02:00
alpr.h	[PATCH] alpr: Update alpr board config file	2007-01-30 12:51:07 +01:00
armadillo.h	…
assabet.h	…
at91rm9200dk.h	Add support for multiple PHYs.	2005-10-28 22:30:33 +02:00
atc.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
atstk1002.h	Add ATSTK1000 and ATSTK1002 board support	2006-10-24 14:42:37 +02:00
bamboo.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
barco.h	Support passing of OF flat trees to the kernel.	2005-10-13 01:45:54 +02:00
bubinga.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
c2mon.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
canmb.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
cerf250.h	…
cm41xx.h	…
cm4008.h	…
cmc_pu2.h	Update configuration for CMC-PU2 board	2006-06-16 16:43:33 +02:00
cmi_mpc5xx.h	…
cobra5272.h	…
cogent_common.h	…
cogent_mpc8xx.h	…
cogent_mpc8260.h	…
cpci5200.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
cradle.h	…
csb226.h	…
csb272.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
csb472.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
csb637.h	Fix the machine-id of the Cogent csb637 board	2005-10-06 01:26:16 +02:00
dbau1x00.h	* Fix dbau1x00 Board	2006-04-11 14:53:29 +02:00
debris.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
delta.h	delta board: support for magic key detection and handling.	2006-04-25 10:03:01 +02:00
dnp1110.h	…
eXalion.h	…
ebony.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
ep82xxm.h	README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE	2006-10-28 02:28:02 +02:00
ep7312.h	…
ep8248.h	…
ep8260.h	…
evb4510.h	…
ezkit533.h	Coding Style cleanup	2006-03-12 02:55:22 +01:00
gcplus.h	…
gth2.h	Add support for TB5200 board	2006-07-19 13:50:38 +02:00
gw8260.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
h2_p2_dbg_board.h	…
hermes.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
hmi1001.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
hymod.h	…
idmr.h	[iDMR] Add MTD and JFFS2 support, also add default partition definition.	2007-01-23 17:22:06 +01:00
impa7.h	…
incaip.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
inka4x0.h	Update default environment for INKA4x00 board.	2006-02-07 15:18:25 +01:00
innokom.h	…
integratorap.h	…
integratorcp.h	…
ixdp425.h	* Update Intel IXP4xx support	2006-05-30 15:56:48 +02:00
ixdpg425.h	* Update Intel IXP4xx support	2006-05-30 15:56:48 +02:00
katmai.h	[PATCH] Update AMCC Katmai 440SPe eval board support	2007-03-01 21:11:36 +01:00
kb9202.h	Complete support for the KwikByte KB920x boards	2005-10-06 01:22:22 +02:00
kvme080.h	Add support for KVME080 board	2006-07-21 11:29:20 +02:00
lart.h	…
logodl.h	…
lpc2292sodimm.h	Add port for the lpc2292sodimm evaluation board from EmbeddedArtists	2007-01-24 12:16:56 +01:00
lpd7a400-10.h	…
lpd7a400.h	…
lpd7a404-10.h	…
lpd7a404.h	…
luan.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
lubbock.h	…
lwmon.h	…
mcc200.h	MCC200 update - add LCD Progress Indicator	2007-02-27 14:17:09 +01:00
mecp5200.h	Minor code cleanup.	2007-02-27 14:26:04 +01:00
ml300.h	…
modnet50.h	…
motionpro.h	[Motion-PRO] Preliminary support for the Motion-PRO board.	2007-02-09 10:45:42 +01:00
mp2usb.h	…
mx1ads.h	…
mx1fs2.h	…
netstar.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
ns9750dev.h	…
o2dnt.h	Change port configuration for O2DNT (CODEC1 on PSC1)	2005-12-06 20:33:07 +01:00
ocotea.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
omap730.h	…
omap730p2.h	…
omap1510.h	…
omap1510inn.h	…
omap1610h2.h	…
omap1610inn.h	…
omap2420h4.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
omap5912osk.h	Update omap5912osk board support	2006-05-10 10:55:16 +02:00
p3mx.h	[PATCH] Update Prodrive P3Mx support	2007-01-18 11:54:52 +01:00
p3p440.h	Merge with /home/sr/git/u-boot/cfi-flash	2006-04-06 00:16:58 +02:00
pb1x00.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
pcs440ep.h	Add support for AMCC Sequoia PPC440EPx eval board	2006-09-07 11:51:23 +02:00
pcu_e.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
pdnb3.h	[PATCH] Update Prodrive SCPU (PDNB3 variant) board	2007-01-30 15:01:49 +01:00
pf5200.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
pleb2.h	…
ppmc7xx.h	Add support for TB5200 board	2006-07-19 13:50:38 +02:00
ppmc8260.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
purple.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
pxa255_idp.h	…
quantum.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
r5200.h	Minor cleanup.	2006-05-10 17:43:20 +02:00
rmu.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
rsdproto.h	…
sacsng.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
sbc405.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
sbc2410x.h	Code cleanup	2006-07-21 11:56:05 +02:00
sbc8240.h	…
sbc8260.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
sbc8349.h	mpc83xx: U-Boot support for Wind River SBC8349	2007-03-02 11:05:53 -06:00
sbc8560.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
sc3.h	SC3: fix typo in default environment	2007-02-28 01:28:53 +01:00
sc520_cdp.h	…
sc520_spunk.h	…
sc520_spunk_rel.h	…
scb9328.h	…
sequoia.h	[PATCH] Update Sequoia EBC configuration (NOR FLASH)	2007-02-19 08:23:15 +01:00
shannon.h	…
smdk2400.h	…
smdk2410.h	…
smmaco4.h	Rename SMMACO4 board into smmaco4 for consistency with Linux.	2006-02-22 10:25:39 +01:00
sorcery.h	Fix build problems on sorcery board.	2006-09-04 02:01:27 +02:00
spc1920.h	SPC1920: cleanup memory contoller setup	2007-01-09 16:02:48 +01:00
spieval.h	* Cleanup TQM5200 board configurations:	2006-07-21 11:16:34 +02:00
stamp.h	Coding Style cleanup	2006-03-12 02:55:22 +01:00
stxgp3.h	Converted all 85xx boards to use a common FSL I2C driver.	2006-10-20 15:50:15 -05:00
stxxtc.h	Fix JFFS2 support for legacy NAND driver.	2006-04-08 19:08:06 +02:00
suzaku.h	…
svm_sc8xx.h	Re-factoring the legacy NAND code (legacy NAND now only in board-specific	2006-03-05 18:57:33 +01:00
taishan.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
tb0229.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
trab.h	Fix some bugs in TRAB board flash driver.	2006-07-19 14:13:02 +02:00
uc100.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
uc101.h	[PATCH] Add support for the UC101 board from MAN.	2006-12-21 16:14:48 +01:00
utx8245.h	Adjust "echo" as a default command	2006-03-12 16:51:59 +01:00
v37.h	Change all '$(...)' variable references into '${...}'	2005-11-20 21:40:11 +01:00
v38b.h	Few V38B changes:	2006-12-28 19:08:21 +01:00
versatile.h	…
virtlab2.h	Add support for VirtLab2 board	2006-05-12 16:15:46 +02:00
voiceblue.h	VoiceBlue update: use new MTD flash partitioning methods, use more	2006-05-03 08:34:03 +02:00
walnut.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
wepep250.h	…
xaeniax.h	…
xm250.h	Enable initrd ATAG for xm250 board.	2006-07-21 11:36:48 +02:00
xsengine.h	…
yosemite.h	[PATCH] Merge Yosemite & Yellowstone board ports	2007-01-30 17:04:19 +01:00
yucca.h	[PATCH] Update some AMCC 4xx board config files (set initrd_high)	2007-02-07 16:51:08 +01:00
zylonite.h	NAND support for zylonite board + some minor cleanup.	2006-04-25 16:48:48 +02:00