uboot/board/ti
Jyri Sarha 8c17cbdf8a arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm
Initialize EMIF OCP_CONFIG registers REG_COS_COUNT_1, REG_COS_COUNT_2,
and REG_PR_OLD_COUNT field for Beaglebone-Black and am335x-evm. With
the default values LCDC suffers from DMA FIFO underflows and frame
synchronization lost errors. The initialization values are the highest
that work flawlessly when heavy memory load is generated by CPU. 32bpp
colors were used in the test. On BBB the video mode used 110MHz pixel
clock. The mode supported by the panel of am335x-evm uses 30MHz pixel
clock.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-09 15:00:03 -05:00
..
am43xx ARM: AMx3xx: Make FIT boot as default boot on HS devices 2016-12-03 13:21:09 -05:00
am57xx am57xx: Set tps659038 PMIC GPIO7 pad mux value to POWERHOLD 2016-12-09 08:40:09 -05:00
am335x arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evm 2016-12-09 15:00:03 -05:00
am3517crane
beagle
common ARM: DRA7: AMxx: Make sure that the SPL always reads the configuration EEPROM 2016-12-05 11:04:40 -05:00
dra7xx ARM: dts: dra71x-evm: Add DT support 2016-12-04 13:54:51 -05:00
evm
ks2_evm keystone2: Move target selection to Kconfig 2016-11-28 15:10:34 -05:00
omap5_uevm
panda
sdp4430
ti814x
ti816x