uboot/arch/powerpc/include/asm
Zang Roy-R61911 c5729f0b1f fman/mEMAC: set SETSP bit in IF_MODE regisgter for RGMII speed
Some legacy RGMII phys don't have in band signaling for the
speed information. so set the RGMII MAC mode according to
the speed got from PHY.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Reported-by: John Traill <john.traill@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-05-02 16:56:44 -05:00
..
arch-mpc83xx
4xx_pci.h
4xx_pcie.h
5xx_immap.h
8xx_immap.h
apm821xx.h
atomic.h
bitops.h
byteorder.h
cache.h ppc4xx: Remove IOP480 support 2012-10-15 11:53:59 -07:00
config.h powerpc/mpc8xxx: Move HWCONFIG_BUFFER_SIZE into config.h 2012-08-23 12:16:56 -05:00
config_mpc85xx.h powerpc/b4860: Adding workaround errata A-005871 2013-05-02 16:56:43 -05:00
config_mpc86xx.h
cpm_85xx.h
cpm_8260.h
e300.h
errno.h
fsl_ddr_dimm_params.h powerpc/mpc8xxx: Add fine timing support for DDR3 2012-08-23 12:16:55 -05:00
fsl_ddr_sdram.h powerpc/mpc8xxx: Fix DDR initialization waiting for D_INIT 2012-10-22 14:31:27 -05:00
fsl_dma.h
fsl_dtsec.h
fsl_enet.h
fsl_fman.h fm/mEMAC: add mEMAC frame work 2012-10-22 14:31:25 -05:00
fsl_i2c.h
fsl_ifc.h Added new ext fields to IFC 2012-08-23 12:16:55 -05:00
fsl_law.h powerpc/mpc8xxx: Enable 3-way and 4-way DDR interleaving 2012-08-23 12:16:55 -05:00
fsl_lbc.h powerpc/85xx: improve definition of BR_PHYS_ADDR macro 2012-08-08 18:32:15 -05:00
fsl_liodn.h powerpc/mpc85xx: Add T4 device definitions 2012-10-22 14:31:22 -05:00
fsl_memac.h fman/mEMAC: set SETSP bit in IF_MODE regisgter for RGMII speed 2013-05-02 16:56:44 -05:00
fsl_mpc83xx_serdes.h
fsl_pci.h
fsl_portals.h powerpc/mpc85xx: Add T4 device definitions 2012-10-22 14:31:22 -05:00
fsl_secure_boot.h
fsl_serdes.h powerpc/corenet2: Add SerDes for corenet2 2012-10-22 14:31:19 -05:00
fsl_srio.h powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target 2012-08-23 10:24:14 -05:00
fsl_tgec.h
global_data.h powerpc: Use generic global_data 2013-02-04 09:05:46 -05:00
gpio.h
immap_83xx.h 8xxx: Change all 8*xx_DDR addresses to 8xxx 2012-11-27 17:45:17 -06:00
immap_85xx.h powerpc/b4: Fix the wrong register offset of B4 PCIE module 2013-05-02 16:56:43 -05:00
immap_86xx.h 8xxx: Change all 8*xx_DDR addresses to 8xxx 2012-11-27 17:45:17 -06:00
immap_512x.h mpc512x: Adjust the DRAM init sequence to the datasheet spec 2013-03-09 08:23:02 +01:00
immap_8220.h
immap_8260.h
immap_qe.h mpc83xx: add support for mpc8309 2012-10-23 15:23:26 -05:00
interrupt.h
io.h arch/powerpc/include/asm/io.h: fix warning: preprocessor token __iomem redefined 2012-11-04 11:00:35 -07:00
iopin_8xx.h
iopin_85xx.h
iopin_8260.h
m8260_pci.h
mc146818rtc.h
mmu.h powerpc/mpc85xx: add support for MMUv2 page sizes 2013-01-30 11:25:15 -06:00
mp.h powerpc/mpc85xx: software workaround for DDR erratum A-004468 2012-10-22 14:31:28 -05:00
mpc8xxx_spi.h
mpc85xx_gpio.h mpc85xx: make gpio_direction_output respect value 2012-10-22 03:03:16 -05:00
mpc512x.h
mpc8349_pci.h
pci_io.h
pnp.h
posix_types.h
ppc4xx-ebc.h
ppc4xx-emac.h
ppc4xx-gpio.h
ppc4xx-i2c.h
ppc4xx-isram.h
ppc4xx-mal.h
ppc4xx-sdram.h include/linux/byteorder: import latest endian definitions from linux 2012-11-04 11:00:34 -07:00
ppc4xx-uic.h
ppc4xx.h ppc4xx: Remove AP1000 board support 2012-10-15 11:53:59 -07:00
ppc4xx_config.h
ppc405.h ppc4xx: Remove IOP480 support 2012-10-15 11:53:59 -07:00
ppc405cr.h
ppc405ep.h
ppc405ex.h
ppc405ez.h
ppc405gp.h
ppc440.h
ppc440ep_gr.h
ppc440epx_grx.h
ppc440gp.h
ppc440gx.h
ppc440sp.h
ppc440spe.h
ppc460ex_gt.h
ppc460sx.h
processor.h powerpc/mpc85xx: Add BSC9132/BSC9232 processor support 2013-01-30 11:25:14 -06:00
ptrace.h
residual.h
sections.h Introduce generic link section.h symbol files 2013-03-15 16:13:58 -04:00
sigcontext.h
signal.h
spl.h Replace __bss_end__ with __bss_end 2013-03-15 16:13:54 -04:00
status_led.h
string.h Add strcasecmp() and strncasecmp() 2012-12-11 13:17:34 -07:00
types.h
u-boot.h ppc: Enable generic board support 2013-03-15 16:14:00 -04:00
unaligned.h
xilinx_irq.h