uboot/include/configs
Troy Kisky 2bf3359ea5 i.mx6q: mx6qsabrelite: Update the network configuration
Define CONFIG_PHY_MICREL, and
minimize the tx clock delay.

There is an issue with 1000 baseTx mode on early revs
of the SabreLite boards. The center tap pin 9 of the mag RJ45
USB combo was connected to the 3.3 filtered supply. Letting
this pin float solved the problem. Symptoms of the problem
were packets with many extra zeroes tacked on the end, and random
bit flips causing a high rate of CRC errors. 10/100 baseTx worked
fine on all revs. To disable 1000 baseTx for these boards, simply
define the environment variable disable_giga. ie.

setenv disable_giga 1

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
2012-02-27 21:19:25 +01:00
..
km arm/km: speed up i2c access for keymile boards 2012-02-12 10:11:28 +01:00
manroland
A3000.h
ADCIOP.h
ADS860.h
AMX860.h
AP1000.h
APC405.h
AR405.h
ASH405.h
Adder.h
AdderUSB.h
Alaska8220.h
BC3450.h
BMW.h
CANBT.h
CATcenter.h
CMS700.h
CPC45.h
CPCI2DP.h
CPCI405.h
CPCI405AB.h
CPCI405DT.h
CPCI750.h
CPCI4052.h
CPCIISER4.h
CPU86.h
CPU87.h
CRAYL1.h
CU824.h
DASA_SIM.h
DB64360.h
DB64460.h
DP405.h
DU405.h
DU440.h
EB+MCF-EV123.h
ELPPC.h
ELPT860.h
EP88x.h
ESTEEM192E.h
ETX094.h
EVB64260.h
EXBITGEN.h
FADS823.h
FADS850SAR.h
FADS860T.h
FLAGADM.h
FPS850L.h
FPS860L.h
G2000.h
GEN860T.h
GENIETV.h
HH405.h
HIDDEN_DRAGON.h
HUB405.h
HWW1U1A.h eXMeritus HWW-1U-1A: Add support for the AT24C128N I2C EEPROM 2012-01-11 13:57:53 -06:00
IAD210.h
ICU862.h
IDS8247.h
IP860.h
IPHASE4539.h
ISPAN.h
IVML24.h
IVMS8.h
IceCube.h
JSE.h
KAREF.h
KUP4K.h
KUP4X.h
LANTEC.h
M5208EVBE.h
M5235EVB.h
M5249EVB.h
M5253DEMO.h
M5253EVBE.h
M5271EVB.h
M5272C3.h
M5275EVB.h
M5282EVB.h
M5329EVB.h
M5373EVB.h
M5475EVB.h
M5485EVB.h
M52277EVB.h ColdFire: Fix the compile issue for M52277 2011-11-07 22:02:33 +08:00
M53017EVB.h
M54451EVB.h
M54455EVB.h
MBX.h
MBX860T.h
MERGERBOX.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
METROBOX.h
MHPC.h
MIP405.h board/mpl/mip405: use the CFI driver for the MIP405/MIP405T board 2012-01-09 09:25:01 +01:00
ML2.h
MOUSSE.h
MPC86xADS.h
MPC832XEMDS.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
MPC837XEMDS.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
MPC837XERDB.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
MPC885ADS.h
MPC8260ADS.h
MPC8266ADS.h
MPC8308RDB.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
MPC8313ERDB.h mpc8313erdb: fix mtdparts address 2012-01-09 20:10:34 -06:00
MPC8315ERDB.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
MPC8323ERDB.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
MPC8349EMDS.h mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds code 2011-11-03 18:27:56 -05:00
MPC8349ITX.h mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds code 2011-11-03 18:27:56 -05:00
MPC8360EMDS.h powerpc/mpc83xx: Add 33.33MHz support for mpc8360emds 2011-11-07 18:34:40 -06:00
MPC8360ERDK.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
MPC8536DS.h sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option 2012-02-12 10:11:25 +01:00
MPC8540ADS.h
MPC8541CDS.h
MPC8544DS.h
MPC8548CDS.h powerpc/mpc8548cds: Fix network initialization 2011-11-08 08:30:47 -06:00
MPC8555CDS.h
MPC8560ADS.h
MPC8568MDS.h
MPC8569MDS.h powerpc/85xx: clean up and document the QE/FMAN microcode macros 2011-11-29 08:48:06 -06:00
MPC8572DS.h powerpc/85xx: Fix NAND SPL support 2011-11-09 09:13:39 -06:00
MPC8610HPCD.h
MPC8641HPCN.h
MUSENKI.h
MVBC_P.h
MVBLM7.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
MVBLUE.h
MVS1.h
MVSMR.h
MigoR.h
NETPHONE.h
NETTA.h
NETTA2.h
NETVIA.h
NSCU.h
NX823.h
OCRTC.h
ORSG.h
P1_P2_RDB.h sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option 2012-02-12 10:11:25 +01:00
P3G4.h
P1010RDB.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
P1022DS.h powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h 2011-11-29 08:48:06 -06:00
P1023RDS.h powerpc/85xx: clean up and document the QE/FMAN microcode macros 2011-11-29 08:48:06 -06:00
P2020COME.h sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option 2012-02-12 10:11:25 +01:00
P2020DS.h sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option 2012-02-12 10:11:25 +01:00
P2041RDB.h sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option 2012-02-12 10:11:25 +01:00
P3041DS.h powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h 2011-11-29 08:48:06 -06:00
P3060QDS.h powerpc/p3060qds: Add board related support for P3060QDS platform 2011-11-29 08:48:06 -06:00
P4080DS.h
P5020DS.h powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h 2011-11-29 08:48:06 -06:00
PATI.h board/mpl/pati: use the CFI driver for the PATI board 2012-01-09 09:25:07 +01:00
PCI405.h
PCI5441.h
PCIPPC2.h
PCIPPC6.h
PIP405.h board/mpl/pip405: use the CFI driver for the PIP405 board 2012-01-09 09:24:56 +01:00
PK1C20.h
PLU405.h
PM520.h
PM826.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
PM828.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
PMC405.h
PMC405DE.h
PMC440.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
PN62.h
PPChameleonEVB.h
QS823.h
QS850.h
QS860T.h
R360MPI.h
RBC823.h
RPXClassic.h
RPXlite.h
RPXlite_DW.h
RPXsuper.h
RRvision.h
Rattler.h
SBC8540.h
SCM.h
SIMPC8313.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
SM850.h
SPD823TS.h
SX1.h
SXNI855T.h
Sandpoint8240.h
Sandpoint8245.h
TASREG.h
TB5200.h
TK885D.h
TOP860.h
TOP5200.h
TQM85xx.h
TQM823L.h
TQM823M.h
TQM834x.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
TQM850L.h
TQM850M.h TQM850M: Add missing CONFIG_BOOTDELAY 2011-11-07 22:15:46 +01:00
TQM855L.h
TQM855M.h
TQM860L.h
TQM860M.h
TQM862L.h
TQM862M.h
TQM866M.h
TQM885D.h
TQM5200.h
TQM8260.h
TQM8272.h
Total5200.h
VCMA9.h ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board 2012-02-12 10:11:27 +01:00
VOH405.h
VOM405.h
VoVPN-GW.h
W7OLMC.h
W7OLMG.h
WUH405.h
Yukon8220.h
ZPC1900.h
ZUMA.h
a4m072.h
a320evb.h arm: a320evb: define mach-type in board config file 2011-11-27 19:44:49 +01:00
acadia.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
actux1.h
actux2.h
actux3.h
actux4.h
adp-ag101.h
adp-ag101p.h adp-ag101p: Add SoC and board support of ag101p 2011-11-10 10:46:54 +08:00
aev.h
afeb9260.h
alpr.h
am335x_evm.h ARM: AM33XX: Add i2c support 2012-01-23 11:57:31 +01:00
am3517_crane.h nand_spl_simple: store ecc data on the stack 2012-01-26 16:06:21 -06:00
am3517_evm.h am3517evm: remove rootfstype kernel parameter for MMC boot device 2012-02-12 10:11:23 +01:00
amcc-common.h
ap325rxa.h
apollon.h ARM: convert "apollon" board to use boards.cfg 2011-12-10 23:10:36 +01:00
aria.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
aspenite.h
astro_mcf5373l.h
at91rm9200ek.h
at91sam9m10g45ek.h NAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS 2012-01-26 16:09:01 -06:00
at91sam9rlek.h Fix Stelian's email address 2011-11-27 19:44:21 +01:00
at91sam9260ek.h Fix Stelian's email address 2011-11-27 19:44:21 +01:00
at91sam9261ek.h Fix Stelian's email address 2011-11-27 19:44:21 +01:00
at91sam9263ek.h Fix Stelian's email address 2011-11-27 19:44:21 +01:00
atc.h
atngw100.h
atstk1002.h
atstk1003.h
atstk1004.h
atstk1006.h
balloon3.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
bamboo.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
bct-brettl2.h
bf506f-ezkit.h
bf518f-ezbrd.h
bf525-ucr2.h
bf526-ezbrd.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
bf527-ad7160-eval.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
bf527-ezkit.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
bf527-sdp.h
bf533-ezkit.h
bf533-stamp.h
bf537-minotaur.h
bf537-pnav.h
bf537-srv1.h
bf537-stamp.h
bf538f-ezkit.h
bf548-ezkit.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
bf561-acvilon.h
bf561-ezkit.h
bfin_adi_common.h
blackstamp.h
blackvme.h
bluestone.h
br4.h Blackfin: br4: new board port 2012-02-12 15:03:25 -05:00
bubinga.h
c2mon.h
ca9x4_ct_vxp.h
calimain.h arm, davinci: Add support for the Calimain board from OMICRON electronics 2012-02-12 10:11:33 +01:00
cam_enc_4xx.h arm, arm926ejs: Do cpu critical inits only for boards that require it 2012-02-12 10:11:33 +01:00
canmb.h
canyonlands.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
charon.h
cm-bf527.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
cm-bf533.h
cm-bf537e.h
cm-bf537u.h
cm-bf548.h
cm-bf561.h
cm41xx.h
cm4008.h
cm5200.h
cm_t35.h cm-t35: add EEPROM module and pass Linux a serial number 2012-01-16 08:40:11 +01:00
cmi_mpc5xx.h
cobra5272.h
cogent_common.h
cogent_mpc8xx.h
cogent_mpc8260.h
colibri_pxa270.h PXA: Flip colibri_pxa27x to pxa-common.h 2011-12-06 23:59:33 +01:00
coreboot.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
corenet_ds.h sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option 2012-02-12 10:11:25 +01:00
cpci5200.h
cpu9260.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
cpuat91.h
csb272.h
csb472.h
da830evm.h davinci: add support for printing clock frequency 2012-02-12 10:11:32 +01:00
da850evm.h Changes to move hawkboard to the new spl infrastructure 2012-02-12 10:11:33 +01:00
davinci_dm355evm.h davinci: add support for printing clock frequency 2012-02-12 10:11:32 +01:00
davinci_dm355leopard.h davinci: add support for printing clock frequency 2012-02-12 10:11:32 +01:00
davinci_dm365evm.h davinci: add support for printing clock frequency 2012-02-12 10:11:32 +01:00
davinci_dm6467evm.h dm6467Tevm: Use a common configuration file for davinci_dm6467evm and davinci_dm6467Tevm 2012-02-27 21:19:24 +01:00
davinci_dvevm.h davinci: add support for printing clock frequency 2012-02-12 10:11:32 +01:00
davinci_schmoogie.h davinci: add support for printing clock frequency 2012-02-12 10:11:32 +01:00
davinci_sffsdr.h davinci: add support for printing clock frequency 2012-02-12 10:11:32 +01:00
davinci_sonata.h davinci: add support for printing clock frequency 2012-02-12 10:11:32 +01:00
dbau1x00.h
debris.h
devkit8000.h nand_spl_simple: store ecc data on the stack 2012-01-26 16:06:21 -06:00
dig297.h OMAP3: Remove unused define CONFIG_OMAP3_*_DDR 2012-01-16 08:40:10 +01:00
digsy_mtc.h mpc5200: digsy_mtc: Fix extension board detection 2011-12-12 08:17:05 +01:00
dkb.h
dlvision-10g.h
dlvision.h
dnp5370.h
dns325.h kirkwood: add support for D-Link DNS-325 2012-02-12 10:11:28 +01:00
dockstar.h
dreamplug.h
dvlhost.h
eNET.h x86: Provide more configuration granularity 2011-11-29 21:09:52 +11:00
eXalion.h
ea20.h davinci: add support for printing clock frequency 2012-02-12 10:11:32 +01:00
eb_cpux9k2.h NAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS 2012-01-26 16:09:01 -06:00
ebony.h
ecovec.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
edminiv2.h edminiv2: add USB host support 2012-02-12 10:11:28 +01:00
efikamx.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
enbw_cmc.h Changes to move hawkboard to the new spl infrastructure 2012-02-12 10:11:33 +01:00
ep82xxm.h
ep8248.h
ep8260.h
espt.h sh: espt: change config for new sh_eth driver 2011-12-02 13:46:21 +09:00
ethernut5.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
favr-32-ezkit.h
flea3.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
fx12mm.h
galaxy5200.h
gdppc440etx.h
gplugd.h
gr_cpci_ax2000.h sparc: fix unknown escape sequence warnings 2011-12-05 21:55:24 +01:00
gr_ep2s60.h sparc: fix unknown escape sequence warnings 2011-12-05 21:55:24 +01:00
gr_xc3s_1500.h sparc: fix unknown escape sequence warnings 2011-12-05 21:55:24 +01:00
grasshopper.h
grsim.h sparc: fix unknown escape sequence warnings 2011-12-05 21:55:24 +01:00
grsim_leon2.h sparc: fix unknown escape sequence warnings 2011-12-05 21:55:24 +01:00
gth2.h
guruplug.h
gw8260.h
h2_p2_dbg_board.h
hammerhead.h
harmony.h tegra2: Enable SPI environment on Seaboard 2011-12-24 10:23:31 +01:00
hawkboard.h Changes to move hawkboard to the new spl infrastructure 2012-02-12 10:11:33 +01:00
hermes.h
highbank.h ARM: highbank: enable networking and pxe 2012-01-05 20:10:38 +01:00
hmi1001.h
hymod.h
ibf-dsp561.h
icon.h
idmr.h
igep0020.h OMAP3: Remove unused define CONFIG_OMAP3_*_DDR 2012-01-16 08:40:10 +01:00
igep0030.h OMAP3: Remove unused define CONFIG_OMAP3_*_DDR 2012-01-16 08:40:10 +01:00
imx27lite-common.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
imx27lite.h
imx31_litekit.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
imx31_phycore.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
incaip.h
inka4x0.h
integratorap.h integrator: rewrite the AP PCI driver 2012-02-27 21:19:24 +01:00
integratorcp.h integrator: update the Integrator/CP config 2012-02-27 21:19:24 +01:00
intip.h
io.h
io64.h ppc4xx: Add Io64 board support 2011-12-01 09:10:57 +01:00
iocon.h
ip04.h
ipek01.h
jadecpu.h arm: jadecpu: Readd MACH_TYPE_JADECPU 2011-11-05 13:36:31 +01:00
jornada.h
jupiter.h
katmai.h
kilauea.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
km_kirkwood.h arm/km: trigger reconfiguration for the Xilinx FPGA 2011-11-03 22:56:23 +01:00
kmeter1.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
kmsupx5.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
korat.h
kvme080.h
lacie_kw.h ARM: remove duplicated code for LaCie boards 2011-12-06 23:59:30 +01:00
linkstation.h
luan.h
lubbock.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
lwmon.h
lwmon5.h
m28evk.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
magnesium.h
makalu.h
mcc200.h
mcx.h mcx: Enable command line editing 2012-02-27 21:19:24 +01:00
mecp5123.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
mecp5200.h
medcom.h tegra: Fix build error in plutux, medcom 2011-12-24 10:23:32 +01:00
meesc.h Fix Stelian's email address 2011-11-27 19:44:21 +01:00
mgcoge.h
mgcoge3ne.h
mgcoge3un.h
microblaze-generic.h microblaze: Enable TFTP put command 2012-02-23 12:17:08 +01:00
mimc200.h
ml507.h
motionpro.h
mpc5121-common.h
mpc5121ads.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
mpc7448hpc2.h
mpc8308_p1m.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
mpq101.h
mpr2.h
ms7720se.h
ms7722se.h
ms7750se.h
mt_ventoux.h ARM: omap3: Added Teejet mt_ventoux 2012-02-12 10:11:31 +01:00
muas3001.h
mucmc52.h
munices.h
mv-common.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
mv88f6281gtw_ge.h
mx1ads.h
mx6qarm2.h i.mx6q: configs: Add fdt_high and initrd_high variables 2012-02-12 10:11:26 +01:00
mx6qsabrelite.h i.mx6q: mx6qsabrelite: Update the network configuration 2012-02-27 21:19:25 +01:00
mx25pdk.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
mx28evk.h mx28evk: add SPI support 2012-02-27 21:19:22 +01:00
mx31ads.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
mx31pdk.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
mx35pdk.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
mx51evk.h USB: mx51evk: add end enable USB host support on port 1 2011-12-11 14:49:56 +01:00
mx53ard.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
mx53evk.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
mx53loco.h USB: mx53loco: add end enable USB host support on port 1 2011-12-11 14:49:50 +01:00
mx53smd.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
neo.h
nhk8815.h
nios2-generic.h
ns9750dev.h
o2dnt.h
ocotea.h
omap3_beagle.h ehci-omap: driver for EHCI host on OMAP3 2012-02-12 10:11:30 +01:00
omap3_evm.h nand_spl_simple: store ecc data on the stack 2012-01-26 16:06:21 -06:00
omap3_evm_common.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
omap3_evm_quick_mmc.h OMAP3: Add SPL support to omap3_evm 2011-12-06 23:59:38 +01:00
omap3_evm_quick_nand.h nand_spl_simple: store ecc data on the stack 2012-01-26 16:06:21 -06:00
omap3_logic.h ARMV7: Add support For Logic OMAP35x/DM37x modules 2012-01-16 08:40:10 +01:00
omap3_mvblx.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
omap3_overo.h OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL 2012-02-27 21:19:24 +01:00
omap3_pandora.h OMAP3: Remove unused define CONFIG_OMAP3_*_DDR 2012-01-16 08:40:10 +01:00
omap3_sdp3430.h OMAP3: Remove unused define CONFIG_OMAP3_*_DDR 2012-01-16 08:40:10 +01:00
omap3_zoom1.h OMAP3: Remove unused define CONFIG_OMAP3_*_DDR 2012-01-16 08:40:10 +01:00
omap3_zoom2.h OMAP3: Remove unused define CONFIG_OMAP3_*_DDR 2012-01-16 08:40:10 +01:00
omap4_common.h omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses 2011-12-06 23:59:34 +01:00
omap4_panda.h OMAP4: ehci-omap: enable ehci-omap for panda boards 2012-02-12 10:11:31 +01:00
omap4_sdp4430.h
omap5_evm.h omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses 2011-12-06 23:59:34 +01:00
omap730.h
omap730p2.h
omap1510.h
omap1510inn.h
omap1610h2.h
omap1610inn.h
omap2420h4.h
omap5912osk.h
openrd.h
openrisc-generic.h openrisc: Add openrisc-generic example board 2012-01-13 21:17:00 +01:00
origen.h ORIGEN: remove duplicated MACH_TYPE define 2012-02-12 10:11:29 +01:00
otc570.h Fix Stelian's email address 2011-11-27 19:44:21 +01:00
p1_p2_rdb_pc.h configs: Remove CONFIG_NET_MULTI from board files 2012-02-12 10:11:26 +01:00
p3mx.h
p3p440.h
palmld.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
palmtc.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
paz00.h tegra2: Add support for Compal Paz00 (Toshiba AC100) 2012-02-12 10:11:22 +01:00
pb1x00.h
pcm030.h
pcs440ep.h
pdm360ng.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
pdnb3.h
pf5200.h
plutux.h tegra: Fix build error in plutux, medcom 2011-12-24 10:23:32 +01:00
pm9g45.h NAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS 2012-01-26 16:09:01 -06:00
pm9261.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
pm9263.h NAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS 2012-01-26 16:09:01 -06:00
portl2.h arm/km: portl2 environment address update to P1B 2011-11-03 22:56:23 +01:00
ppmc7xx.h
ppmc8260.h
pr1.h Blackfin: pr1: new board port 2012-02-12 15:03:25 -05:00
pxa-common.h PXA: Introduce common configuration header for PXA 2011-12-06 23:59:33 +01:00
pxa255_idp.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
qemu-mips.h
qi_lb60.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
qong.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
quad100hd.h
quantum.h
r2dplus.h
r7780mp.h
rd6281a.h
redwood.h
rsdproto.h
rsk7203.h
rsk7264.h
s5p_goni.h usb:gadget:s5p Enable the USB Gadget framework at GONI 2011-12-11 14:44:49 +01:00
s5pc210_universal.h Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro 2012-02-12 10:11:30 +01:00
sacsng.h
sandbox.h
sbc35_a9g20.h ARM: sbc35_a9g20: re-add MACH_TYPE_SBC35_A9G20 2011-12-19 17:52:44 +01:00
sbc405.h
sbc8349.h mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds code 2011-11-03 18:27:56 -05:00
sbc8548.h sbc8548: enable support for hardware SPD errata workaround 2012-01-11 13:59:14 -06:00
sbc8560.h
sbc8641d.h
sc3.h
scb9328.h
seaboard.h tegra2: Enable SPI environment on Seaboard 2011-12-24 10:23:31 +01:00
sequoia.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
sh7757lcr.h sh: Add a flag which controls the DDR ECC mode of sh7757lcr 2011-12-02 13:46:21 +09:00
sh7763rdp.h sh7763rdp: change config for new sh_eth driver 2011-12-02 13:46:21 +09:00
sh7785lcr.h
sheevaplug.h
shmin.h
smdk2410.h ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board 2012-02-12 10:11:27 +01:00
smdk5250.h SMDK5250: Add ethernet support 2012-02-12 10:11:30 +01:00
smdk6400.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
smdkc100.h
smdkv310.h S5PC2XX: Rename S5pc2XX to exynos 2011-12-09 17:30:09 +01:00
snapper9260.h
socrates.h
sorcery.h
spc1920.h
spear-common.h
spear3xx.h
spear6xx.h
spieval.h
stxgp3.h
stxssa.h
stxxtc.h
suvd3.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
svm_sc8xx.h
t3corp.h
taihu.h
taishan.h
tam3517-common.h ARM: omap3: Added Teejet mt_ventoux 2012-02-12 10:11:31 +01:00
tb0229.h
tcm-bf518.h
tcm-bf537.h
tegra2-common.h tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000. 2011-12-24 10:23:31 +01:00
tnetv107x_evm.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
tny_a9260.h ARM: tny_a9260: re-add MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260 2011-12-19 17:52:44 +01:00
top9000.h
trats.h Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro 2012-02-12 10:11:30 +01:00
tricorder.h OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL 2012-02-27 21:19:24 +01:00
trizepsiv.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
tt01.h tt01: add MMC support 2012-02-12 10:11:27 +01:00
tuxx1.h powerpc/83xx/km: add support for 8321 based tuge1 board 2012-01-09 20:10:34 -06:00
twister.h ARM: omap3: add support to Technexion twister board 2011-12-24 10:23:29 +01:00
tx25.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
u8500_href.h
uc100.h
uc101.h
utx8245.h
v5fx30teval.h
v37.h
v38b.h
vct.h
ve8313.h mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds code 2011-11-03 18:27:56 -05:00
ventana.h arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master 2011-12-24 10:23:32 +01:00
versatile.h
virtlab2.h
vision2.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00
vme8349.h mpc83xx: Cleanup usage of LBC constants 2011-11-03 18:27:56 -05:00
vpac270.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
walnut.h
xaeniax.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
xilinx-ppc.h
xilinx-ppc405-generic.h
xilinx-ppc405.h
xilinx-ppc440-generic.h
xilinx-ppc440.h
xpedite517x.h
xpedite520x.h
xpedite537x.h
xpedite550x.h
xpedite1000.h
yosemite.h
yucca.h
zeus.h
zipitz2.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
zmx25.h MX: serial_mxc: cleanup removing nasty #ifdef 2011-12-06 23:59:40 +01:00