Commit Graph

19399 Commits

Author SHA1 Message Date
Daniel Schwierzeck 3420bf1ca0 MIPS: u-boot.lds: introduce symbol __image_copy_end
This symbol is used in later patches as end address
for relocation of the U-Boot image into RAM.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12 22:22:12 +01:00
Daniel Schwierzeck a52852c5a6 MIPS: u-boot.lds: merge all BSS sections and introduce symbols __bss_[start|end]
These symbols are used in later patches for as addresses for
clearing the BSS area in the relocated U-Boot image.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12 22:22:12 +01:00
Gabor Juhos 45397816b2 MIPS: compute num_got_entries from .got section's size
The '__got_start' and '__got_end' symbols are used
only in the linker script to compute the value of
the 'num_got_entries' symbol.

Remove the symbols and use the SIZEOF(.got) command
to get the size of the .got section.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
2013-02-12 22:22:12 +01:00
Daniel Schwierzeck 8b1c7345c6 MIPS: start.S: unify and simplify reset vector handling
Adopt reset vector handling from Yamon.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12 22:22:12 +01:00
Daniel Schwierzeck 4dc7412afa MIPS: start.S: remove obsolete 64 bit handling in setup_c0_status
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2013-02-12 22:22:12 +01:00
Daniel Schwierzeck 97b920dab1 MIPS: xburst: fix broken access to global_data
Fix access to global_data which is broken since commits:

commit 035cbe99cd
Author: Simon Glass <sjg@chromium.org>
Date:   Thu Dec 13 20:49:08 2012 +0000

    mips: Move per_clk and dev_clk to arch_global_data

    Move these field into arch_global_data and tidy up. The other
    CONFIG_JZSOC fields are used by various architectures, so just remove
    the #ifdef bracketing for these.

    Signed-off-by: Simon Glass <sjg@chromium.org>

commit 582601da2f
Author: Simon Glass <sjg@chromium.org>
Date:   Thu Dec 13 20:48:35 2012 +0000

    arm: Move lastinc to arch_global_data

    Move this field into arch_global_data and tidy up.

    Signed-off-by: Simon Glass <sjg@chromium.org>

commit 66ee692347
Author: Simon Glass <sjg@chromium.org>
Date:   Thu Dec 13 20:48:34 2012 +0000

    arm: Move tbl to arch_global_data

    Move this field into arch_global_data and tidy up.

    Signed-off-by: Simon Glass <sjg@chromium.org>

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
2013-02-12 22:22:12 +01:00
Tom Rini 1634e96918 am335x_evm: Fix CPSW ethernet on GP EVM and EVM-SK
In commit cfd4ff6 we implemented part of advisory 1.0.10 (internal delay
for RGMII mode not supported).  This in turn however requires that we
set the tx clock delay feature in the PHY itself.

Signed-off-by: Tom Rini <trini@ti.com>
2013-02-12 14:59:23 -05:00
Eric Nelson bec0160e9f i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
In order to use the more thorough memory test, the macro
CONFIG_SYS_MEMTEST_SCRATCH must be defined with a usable
address.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-02-12 18:44:54 +01:00
Fabio Estevam 2d7237c92f mx23evk: Turn on caches
It is safe to turn on data and instruction caches for mx23.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-02-12 18:44:54 +01:00
Fabio Estevam c4c25940b9 mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
The baudrate is already defined by CONFIG_BAUDRATE and there is no need
to keep CONFIG_SYS_BAUDRATE_TABLE.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2013-02-12 18:44:54 +01:00
Otavio Salvador 291b3dcd49 build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
When calling 'make u-boot.imx' the build were failing as it were
expecting the full path for the file; this regression has been
included by commit 71a988a (imximage.cfg: run files through C
preprocessor).

The direct references for u-boot.imx were replaced by $(obj) as
config.mk handles the proper setting of it making it set to $(OBJTREE)
when required.

The build has been test using:

 - ./MAKEALL -s mx5 -s mx6
 - make u-boot.imx
 - make O=/tmp/build

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-02-12 18:39:08 +01:00
Tom Rini 951c6baaf4 Merge branch 'master' of git://git.denx.de/u-boot-arm 2013-02-12 10:18:31 -05:00
Fabio Estevam 76c91e668a mx6: Disable Power Down Bit of watchdog
On a mx6qsabresd revision C board with rev1.2 mx6q, the system gets resetted
and it is not able to reach the Linux prompt.

Comparing the watchdog behaviour on a revB versus revC board:

- On a mx6qsabresd revB:

U-Boot > reset
resetting ...

U-Boot 2013.01-10524-g432a3aa-dirty (Feb 07 2013 - 13:34:46)

CPU:   Freescale i.MX6Q rev1.1 at 792 MHz
Reset cause: WDOG
...

- On a mx6qsabresd revC:

U-Boot > reset
resetting ...

U-Boot 2013.01-10524-g432a3aa-dirty (Feb 07 2013 - 13:34:46)

CPU:   Freescale i.MX6Q rev1.1 at 792 MHz
Reset cause: POR

So due to revC POR/watchdog circuitry whenever a watchdog occurs, it causes a POR.

Clearing the PDE - Power Down Enable bit of WMCR registers fixes the problem and
is also safe for all mx6 boards.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-02-12 13:54:34 +01:00
Benoît Thébaudeau 7c92c54075 imx: mx6q DDR3 init: Benefit from available CL = 7
All the users of mx6q_4x_mt41j128.cfg (DDR3-1333H Micron MT41J128M16HA-15E or SK
hynix H5TQ2G63BFR-H9C for i.MX6Q SABRE Lite, and DDR3-1600K Micron
MT41K128M16JT-125:K for i.MX6 SABRE SD) support the optional down binning to
DDR3-1066F (CL = 7, CWL = 6), which is possible at 532 MHz, so use it.

In these conditions:
  tRCD(min) = 13.125 ns
  tRP(min) = 13.125 ns
  tRC(min) = max(tRAS(min, DDR3-1333H), tRAS(min, DDR3-1600K)) + tRP(min)
  tRAS(min, DDR3-1333H) = 36 ns
  tRAS(min, DDR3-1600K) = 35 ns

MMDC1_MDCFG0.tCL should be set to 7 nCK, encoded as 0x4 in the bit-field
MMDC1_MDCFG0[3:0].

MR0.CL should be set as in MMDC1_MDCFG0.tCL, i.e. to 7 nCK, which is encoded
as 0x6 in MRS.LMR.MR0.{A6:A4, A2} and MMDC1_MDSCR[22:20, 18].

MMDC1_MDCFG1.tCWL should be set to 6 nCK, encoded as 0x4 in the bit-field
MMDC1_MDCFG1[2:0].

MMDC1_MDCFG1.tRCD should be set to 13.125 ns, which is 7 nCK at 532 MHz, encoded
as 0x6 in the bit-field MMDC1_MDCFG1[31:29].

MMDC1_MDCFG1.tRP should be set to 13.125 ns, which is 7 nCK at 532 MHz, encoded
as 0x6 in the bit-field MMDC1_MDCFG1[28:26].

MMDC1_MDCFG1.tRC should be set to 49.125 ns, which is 27 nCK at 532 MHz, encoded
as 0x1A in the bit-field MMDC1_MDCFG1[25:21].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-02-12 13:52:31 +01:00
Benoît Thébaudeau b42b5b7a24 imx: mx6q DDR3 init: Fix MR0.PPD
MR0.PPD should be set as in MMDCx_MDPDC.SLOW_PD, i.e. to fast-exit mode, which
is encoded as 1 in MRS.LMR.MR0.A12 and MMDCx_MDSCR[28].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-02-12 13:52:31 +01:00
Benoît Thébaudeau 1791b1f97f imx: mx6q DDR3 init: Fix RST_to_CKE
MMDC1_MDOR.RST_to_CKE should be set to 500 µs according to the JEDEC
specification for DDR3. With a cycle of 15.258 µs, this gives 33 cycles encoded
as 0x23 for the bit-field MMDC1_MDOR[5:0].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-02-12 13:52:31 +01:00
Benoît Thébaudeau ada02b8463 imx: mx6q DDR3 init: Fix SDE_to_RST
MMDC1_MDOR.SDE_to_RST should be set to 200 µs according to the JEDEC
specification for DDR3. With a cycle of 15.258 µs, this gives 14 cycles encoded
as 0x10 for the bit-field MMDC1_MDOR[13:8].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-02-12 13:52:30 +01:00
Benoît Thébaudeau aa53149e11 imx: mx6q DDR3 init: Fix tXPR
MMDC1_MDOR.tXPR should be set as specified for the JEDEC DDR3 timing tXPR.

For all DDR3 speed bins:
  tXPR(min) = max(5 nCK, tRFC(min) + 10 ns)
  tRFC(2 Gb) = 160 ns

All the users of mx6q_4x_mt41j128.cfg have a 2-Gb density (Micron
MT41J128M16HA-15E or SK hynix H5TQ2G63BFR-H9C for i.MX6Q SABRE Lite, and Micron
MT41K128M16JT-125:K for i.MX6 SABRE SD).

Hence, MMDC1_MDOR.tXPR should be set to max(5 nCK, 170 ns), which is 170 ns
and 91 nCK at 532 MHz, encoded as 0x5A in the bit-field MMDC1_MDOR[23:16].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-02-12 13:52:30 +01:00
Benoît Thébaudeau 6904e37746 imx: mx6q DDR3 init: Fix tMRD
MMDC1_MDCFG1.tMRD should be set to max(tMRD, tMOD) for DDR3.

For all DDR3 speed bins:
  tMRD(min) = 4 nCK
  tMOD(min) = max(12 nCK, 15 ns)

Hence, MMDC1_MDCFG1.tMRD should be set to max(12 nCK, 15 ns), which is 12 nCK
at 532 MHz, encoded as 0xB in the bit-field MMDC1_MDCFG1[8:5].

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
2013-02-12 13:52:30 +01:00
Lucas Stach fd8e1c3866 arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
No one expects to end up in a delayed environment if
CONFIG_DELAY_ENVIRONMENT isn't defined.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Allen Martin <amartin@nvidia.com>
2013-02-11 10:35:26 -07:00
Tom Warren 07067145de Tegra114: Add/enable Dalmore build (T114 reference board)
This build is stripped down. It boots to the command prompt.
GPIO is the only peripheral supported. Others TBD.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:26 -07:00
Tom Warren 94829195ac Tegra114: Add generic Tegra114 build support
This patch adds basic Tegra114 (T114) build support - no specific
board is targeted.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:26 -07:00
Tom Warren 8aff009585 Tegra114: Dalmore: Add DT files
These are stripped down for bringup, They'll be filled out later
to match-up with the kernel DT contents, and/or as devices are
brought up (mmc, usb, spi, etc.).

Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:25 -07:00
Tom Warren e23bb6a438 Tegra114: Add common CPU (shared) files
These files are used by both SPL and main U-Boot.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:25 -07:00
Tom Warren ec1885cee1 Tegra114: Add CPU (armv7) files
These files are for code that runs on the CPU (A15) on T114 boards.
At this time, there is no A15-specific code here.
As T114-specific run-time code is added, it'll go here.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:25 -07:00
Tom Warren 4040ec10df Tegra114: Add AVP (arm720t) files
This provides SPL support for T114 boards - AVP early init, plus
CPU (A15) init/jump to main U-Boot.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:25 -07:00
Tom Warren 2fc65e2834 Tegra114: Add arch-tegra114 include files
Common Tegra files are in arch-tegra, shared between T20/T30/T114.
Tegra114-specific headers are in arch-tegra114. Note that some of
these will be filled in as more T114 support is added (drivers,
WB/LP0 support, etc.).

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2013-02-11 10:35:25 -07:00
Allen Martin d2f18f261b tegra: cardhu: config: enable SPI
Turn on SPI in cardhu config file

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:25 -07:00
Allen Martin b19f57491a tegra: add SPI SLINK driver
Add driver for tegra SPI "SLINK" style driver.  This controller is
similar to the tegra20 SPI "SFLASH" controller.  The difference is
that the SLINK controller is a genernal purpose SPI controller and the
SFLASH controller is special purpose and can only talk to FLASH
devices.  In addition there are potentially many instances of an SLINK
controller on tegra and only a single instance of SFLASH.  Tegra20 is
currently ths only version of tegra that instantiates an SFLASH
controller.

This driver supports basic PIO mode of operation and is configurable
(CONFIG_OF_CONTROL) to be driven off devicetree bindings.  Up to 4
devices per controller may be attached, although typically only a
single chip select line is exposed from tegra per controller so in
reality this is usually limited to 1.

To enable this driver, use CONFIG_TEGRA_SLINK

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:25 -07:00
Allen Martin 91673e2adf tegra: add addresses of SPI SLINK controllers
Add I/O addresses of SPI SLINK controllers 1-6

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:24 -07:00
Allen Martin 23e3158f34 tegra30: fdt: add SPI SLINK nodes
Add tegra30 SPI SLINK nodes to fdt.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:24 -07:00
Allen Martin 7d54f022bb tegra30: add SBC1 to periph id mapping table
SBC1 is SPI controller 1 on tegra30

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:24 -07:00
Allen Martin 8f1b46b104 tegra: spi: add fdt support to tegra SPI SFLASH driver
Add support for configuring tegra SPI driver from devicetree.
Support is keyed off CONFIG_OF_CONTROL.  Add entry in seaboard dts
file for spi controller to describe seaboard spi.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:24 -07:00
Allen Martin c98f03fae0 tegra20: fdt: add SPI SFLASH node
Add node for tegra20 SPI SFLASH controller to fdt.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:24 -07:00
Stephen Warren c35eb56a0e tegra: don't hard-code LCD into default TEGRA_DEVICE_SETTINGS
Only add "lcd" into TEGRA_DEVICE_SETTINGS if CONFIG_VIDEO_TEGRA.
Otherwise, "lcd" is meaningless.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:24 -07:00
Stephen Warren 4727a13bde tegra: rename FUNCMUX_UART2_UARTB
FUNCMUX_ defines should be named after the pin groups they affect, not
after the module they're muxing onto those pin groups.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:24 -07:00
Tom Warren f29f086a09 Tegra: Move common clock code to arch/arm/cpu/tegra-common/clock.c
This 'commonizes' much of the clock/pll code. SoC-dependent code
and tables are left in arch/cpu/tegraXXX-common/clock.c

Some T30 tables needed whitespace fixes due to checkpatch complaints.

Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:24 -07:00
Tom Warren d83152d8e4 Tegra: T20: Remove unused 'SLOW' SoC ID and PLLX table entry
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:23 -07:00
Allen Martin 36068ae75e tegra: fdt: add back missing host1x node
Add back host1x node to seaboard dts file.  This got dropped during
the tegra fdt sort.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2013-02-11 10:35:23 -07:00
Gerald Van Baren 58864ddc72 Clean up libfdt.h includes
The libfdt.h file is the definition file for libfdt.  It is unnecessary
to include other fdt header files (the necessary ones are pulled in
by libfdt.h).

Signed-off-by: Gerald Van Baren <gvb@unssw.com>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefan Roese <sr@denx.de>
2013-02-08 22:32:38 -05:00
Kim Phillips 8aa5ec6e16 common/fdt_support.c: sparse fixes
trivial:

fdt_support.c:89:64: warning: Using plain integer as NULL pointer
fdt_support.c:325:65: warning: Using plain integer as NULL pointer
fdt_support.c:352:65: warning: Using plain integer as NULL pointer

For the following bad constant expression, We hardcode the max. number of
memory banks to four for the foreseeable future, and add an error with
instructions on what to do once it's exceeded:

fdt_support.c:397:22: error: bad constant expression

For the rest below, sparse found a couple of wrong endian conversions
in of_bus_default_translate() and fdt_get_base_address(), but
otherwise the rest is mostly annotation fixes:

fdt_support.c:64:24: warning: cast to restricted __be32
fdt_support.c:192:21: warning: incorrect type in assignment (different base types)
fdt_support.c:192:21:    expected unsigned int [unsigned] [usertype] tmp
fdt_support.c:192:21:    got restricted __be32 [usertype] <noident>
fdt_support.c:201:21: warning: incorrect type in assignment (different base types)
fdt_support.c:201:21:    expected unsigned int [unsigned] [addressable] [usertype] tmp
fdt_support.c:201:21:    got restricted __be32 [usertype] <noident>
fdt_support.c:304:13: warning: incorrect type in assignment (different base types)
fdt_support.c:304:13:    expected unsigned int [unsigned] [usertype] val
fdt_support.c:304:13:    got restricted __be32 [usertype] <noident>
fdt_support.c:333:13: warning: incorrect type in assignment (different base types)
fdt_support.c:333:13:    expected unsigned int [unsigned] [usertype] val
fdt_support.c:333:13:    got restricted __be32 [usertype] <noident>
fdt_support.c:359:13: warning: incorrect type in assignment (different base types)
fdt_support.c:359:13:    expected unsigned int [unsigned] [usertype] val
fdt_support.c:359:13:    got restricted __be32 [usertype] <noident>
fdt_support.c:373:21: warning: cast to restricted __be32
fdt_support.c:963:48: warning: incorrect type in argument 1 (different base types)
fdt_support.c:963:48:    expected restricted __be32 const [usertype] *p
fdt_support.c:963:48:    got unsigned int [usertype] *<noident>
fdt_support.c:971:48: warning: incorrect type in argument 1 (different base types)
fdt_support.c:971:48:    expected restricted __be32 const [usertype] *p
fdt_support.c:971:48:    got unsigned int [usertype] *<noident>
fdt_support.c:984:29: warning: incorrect type in argument 1 (different base types)
fdt_support.c:984:29:    expected restricted __be32 const [usertype] *cell
fdt_support.c:984:29:    got unsigned int [usertype] *addr
fdt_support.c:996:32: warning: incorrect type in argument 1 (different base types)
fdt_support.c:996:32:    expected restricted __be32 const [usertype] *cell
fdt_support.c:996:32:    got unsigned int [usertype] *addr
fdt_support.c:1041:41: warning: incorrect type in argument 1 (different base types)
fdt_support.c:1041:41:    expected restricted __be32 const [usertype] *cell
fdt_support.c:1041:41:    got unsigned int [usertype] *addr
fdt_support.c:1053:41: warning: incorrect type in argument 2 (different base types)
fdt_support.c:1053:41:    expected restricted __be32 const [usertype] *range
fdt_support.c:1053:41:    got unsigned int const [usertype] *[assigned] ranges
fdt_support.c:1064:53: warning: incorrect type in argument 2 (different base types)
fdt_support.c:1064:53:    expected restricted __be32 const [usertype] *addr
fdt_support.c:1064:53:    got unsigned int [usertype] *addr
fdt_support.c:1110:50: warning: incorrect type in argument 2 (different base types)
fdt_support.c:1110:50:    expected restricted __be32 const [usertype] *addr
fdt_support.c:1110:50:    got unsigned int *<noident>
fdt_support.c:1121:49: warning: incorrect type in argument 1 (different base types)
fdt_support.c:1121:49:    expected restricted __be32 const [usertype] *cell
fdt_support.c:1121:49:    got unsigned int *<noident>
fdt_support.c:1147:60: warning: incorrect type in argument 2 (different base types)
fdt_support.c:1147:60:    expected restricted __be32 const [usertype] *addr
fdt_support.c:1147:60:    got unsigned int *<noident>
fdt_support.c:1081:5: warning: symbol '__of_translate_address' was not declared. Should it be static?
fdt_support.c:1154:5: error: symbol 'fdt_translate_address' redeclared with different type (originally declared at include/fdt_support.h:95) - incompatible argument 3 (different base types)
fdt_support.c: In function 'fdt_node_offset_by_compat_reg':
fdt_support.c:1173:17: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]

See also linux kernel commit 0131d897 "of/address: use proper
endianess in get_flags".

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
2013-02-07 20:38:55 -05:00
Kim Phillips b2ba62a1aa libfdt: update from upstream dtc commit 142419e
commit 142419e "dtc/libfdt: sparse fixes", for u-boot's libfdt copy.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
2013-02-07 20:38:55 -05:00
Kim Phillips 71bbb3df90 libfdt: update fdt.h from upstream dtc
upstream dtc commit feafcd972cb744750a65728440c99526e6199a6d
"dtc/libfdt: introduce fdt types for annotation by endian checkers".

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
2013-02-07 20:38:55 -05:00
Kim Phillips 25aca0fbb5 libfdt_env.h: add fdt type definitions
fdt types are big endian.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
2013-02-07 20:38:55 -05:00
Kim Phillips 12e06fe03f treewide: include libfdt_env.h before fdt.h
and, if including libfdt.h which includes libfdt_env.h in
the correct order, don't include fdt.h before libfdt.h.

this is needed to get the fdt type definitions set from
the project environment before fdt.h uses them.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
2013-02-07 20:38:55 -05:00
Allen Martin 6487d88aaa fdt: fix dts preprocessor options
Using "-ansi" preprocessor option will cause dts lines that begin with
'#' to choke the preprocessor.  Change to "-x assembler-with-cpp"
instead which is what the kernel uses to preprocess dts files.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2013-02-07 20:38:51 -05:00
Tom Rini 8978f860a6 am33xx: Drop gpio0_7_pin_mux from phytec pcm051
This mux is not currently used and appears to be a carry-over from the
am335x evm code.

Acked-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Tom Rini <trini@ti.com>
2013-02-07 10:36:26 -05:00
Javier Martinez Canillas 3e857d041f OMAP3: igep00x0: fix a build warning on IGEP boards
commit b689cd5 OMAP3: use a single board file for IGEP devices

introduced the following build warning:

igep00x0.h:168:24: warning: backslash-newline at end of file [enabled
by default]

This patch fixes the issue.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2013-02-07 10:36:26 -05:00
hvaibhav@ti.com f170899f73 AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree
For AM335X boards, such as the EVM and Bone Linux kernel fails to
locate the device tree blob on boot. The reason being is that
u-boot is copying the DT blob to the upper part of RAM when booting
the kernel and the kernel is unable to access the blob.
By setting the fdt_high variable to 0xffffffff (to prevent the copy)
the kernel is able to locate the DT blob and boot.

This patch is tested on BeagleBone platform.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Tom Rini <trini@ti.com>
2013-02-07 10:36:26 -05:00
Jeff Lance 13526f7157 Add DDR3 support for AM335x-EVM (Version 1.5A)
AM335x EVM 1.5A uses Micron MT41J512M8RH-125 SDRAM 4Gb (512Mx8) as the
DDR3 chip.

[Hebbar Gururaja <gururaja.hebbar@ti.com>]
	- Resolve merge conflict while rebasing. File structure is
	  changed in the mainline. So re-arrange the code accordingly.
	- Update commit message to reflect the DDR3 part number

Signed-off-by: Jeff Lance <j-lance1@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Hebbar Gururaja <gururaja.hebbar@ti.com>
2013-02-07 10:36:26 -05:00