6bd2447ee4
Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
2007-01-24 12:16:56 +01:00
b78bb469f5
Merge with /home/tur/proj/idmr/u-boot
2007-01-24 10:26:47 +01:00
f7db33101f
[iDMR] Flash driver on initialisation write-protects some sectors,
...
currently sectors 0-3. Sector 3 does not need to be protected, though
(U-boot occupies sectors 0-1 and the environment sector 2). This commit
fixes this, i.e., only sectors 0-2 are protected.
2007-01-23 14:21:14 +01:00
a401239664
Minor code cleanup.
2007-01-19 23:08:39 +01:00
15e5025a73
Merge with /home/hs/SC3/u-boot-dev
2007-01-19 12:06:32 +01:00
9d8d5a5bfb
[PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 16:05:47 +01:00
0057d758e3
[PATCH] Update Prodrive P3Mx support
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 11:54:52 +01:00
cb4820725e
[PATCH] Fix: Compilerwarnings for SC3 board.
...
The EBC Configuration Register is now by CFG_EBC_CFG definable
Added JFFS2 support for the SC3 board.
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-18 11:28:51 +01:00
3a83ee3021
Merge with /home/stefan/git/u-boot/denx-merge-sr
2007-01-18 10:27:26 +01:00
5fb692cae5
[PATCH] Add support for AMCC Taishan PPC440GX eval board
...
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-18 10:25:34 +01:00
6d3e010723
Raname solidcard3 into sc3; add redundant env for sc3
2007-01-16 18:30:50 +01:00
f11033e739
Merge with /home/hs/SC3/u-boot
...
Some code cleanup.
2007-01-15 13:41:04 +01:00
ddd4123336
Merge with /home/hs/MAN/u-boot-dev
2007-01-15 12:56:52 +01:00
44cd6de2e1
Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx-merge-sr
2007-01-13 08:01:31 +01:00
77ddc5b9af
[PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
...
Now the board revision and the current PCI bus speed are printed after
the board message.
Also the EBC initialising is now done via defines in the board config
file.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-13 07:59:56 +01:00
36adff362c
[PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
...
Now the board revision and the current PCI bus speed are printed after
the board message.
Also the EBC initialising is now done via defines in the board config
file.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-13 07:59:19 +01:00
e0b9ea8c8a
[PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
...
Now the board revision and the current PCI bus speed are printed after
the board message.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-13 07:57:51 +01:00
ca43ba18e9
Added support for the SOLIDCARD III board from Eurodesign
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-11 15:44:44 +01:00
0350e79d2a
Merge with /home/m8/git/u-boot/
2007-01-10 16:36:51 +01:00
2e61581435
Merge with /home/mk/11-cmb1920/u-boot#4upstream
2007-01-10 15:34:43 +01:00
787fa15860
Fix auto_update for MCC200 board.
...
The invocation of do_auto_update() is moved to the end of the
misc_init_r() function, after the flash mappings have been
initialized. Please find attached a patch that implements that
change.
Also correct the decoding of the keypad status. With this update, the
key that will trigger the update is Column 2, Row 2.
2007-01-10 01:28:39 +01:00
d9384de2f5
CAM5200 flash driver modifications:
...
- use CFI driver (replaces custom flash driver) for main 'cam5200' target
- add second build target 'cam5200_niosflash' which still uses custom driver
2007-01-10 00:26:15 +01:00
67fea022fa
SPC1920: cleanup memory contoller setup
2007-01-09 16:02:48 +01:00
9295acb774
SPC1920: add support for the FM18L08 Ramtron FRAM
2007-01-09 14:57:13 +01:00
5921e5313f
Miscellanious spc1920 related cleanups
2007-01-09 14:57:13 +01:00
e4c2d37adc
SPC1920 GO/NOGO led should be set to color red in U-Boot
2007-01-09 14:57:12 +01:00
d8d9de1a02
Update the SPC1920 CMB PLD driver
2007-01-09 14:57:10 +01:00
d28707dbce
Add support for the tms320671x host port interface (HPI)
2007-01-09 14:57:10 +01:00
f16c1da957
[PATCH] Update ALPR board files
...
This update brings the ALPR board support to the newest version.
It also fixes a problem with the NAND driver.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-06 15:56:13 +01:00
c04a1a7287
Merge with /home/stefan/git/u-boot/denx-merge-sr
2007-01-05 10:40:50 +01:00
a78bc443ae
[PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
...
This fix will make the MAL burst disabling patch for the Linux
EMAC driver obsolete.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-05 10:40:36 +01:00
0238898382
[PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
...
This code will optimize the DDR2 controller setup on a board specific
basis.
Note: This code doesn't work right now on the NAND booting image for the
Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
Signed-off-by: Stefan Roese <sr@denx.de>
2007-01-05 10:38:05 +01:00
574ca77c41
Merge with /home/tur/proj/v38b/u-boot
2007-01-04 02:05:51 +01:00
cce4acbb68
Few V38B changes:
...
- fix a typo in V38B config file
- move watchdog initialisation earlier in the boot process
- add "wdt=off" to default kernel command line (disables kernel watchdog)
2006-12-28 19:08:21 +01:00
9c0f42ecfe
Minor code cleanup.
2006-12-24 01:42:57 +01:00
bc5556d62b
Merge with /home/hs/TQ/u-boot-dev
2006-12-24 01:30:04 +01:00
1b3c360c23
[PATCH] Fix sequoia flash autodetection (finally correct)
...
Now 32MByte and 64MByte FLASH is know to work and other
configurations should work too.
Signed-off-by: Stefan Roese <sr@denx.de>
2006-12-22 14:29:40 +01:00
82e5236a8b
Minor code cleanup; update CHANGELOG.
2006-12-22 10:30:26 +01:00
fa23044564
Added support for the TQM8272 board from TQ
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-12-21 17:17:02 +01:00
6dedf3d49d
[PATCH] Add support for the UC101 board from MAN.
...
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-12-21 16:14:48 +01:00
daa6e418bc
Preliminary support for the iDMR board (ColdFire).
2006-12-20 00:27:32 +01:00
cdb97a6678
automatic update mechanism
2006-12-08 16:23:08 +01:00
dd520bf314
Code cleanup.
2006-11-30 18:02:20 +01:00
ab07b6c221
Merge with http://opensource.freescale.com/pub/scm/u-boot-83xx.git
2006-11-30 02:01:32 +01:00
8d9a8610b8
Code cleanup. Update CHANGELOG.
2006-11-30 01:54:07 +01:00
1eac2a7141
[PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
...
This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
quite similar and share the same board directory "prodrive/p3mx"
and the same config file "p3mx.h".
Signed-off-by: Stefan Roese <sr@denx.de>
2006-11-29 16:14:05 +01:00
32081125a0
Merge http://www.denx.de/git/u-boot
2006-11-28 23:35:49 -06:00
e857a5bdb3
mpc83xx: Miscellaneous code style fixes
...
Implement various code style fixes and similar changes.
Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-28 23:34:30 -06:00
e59581c56a
[PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
...
This patch adds the code and configuration necessary to boot with an
arch/powerpc Linux kernel.
Signed-off-by: Grant Likely <grant.likely@gmail.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
2006-11-28 17:55:49 +01:00
d2c83f5493
Merge with /home/sr/git/u-boot/denx-alpr-merge-test
2006-11-27 23:11:18 +01:00
Gary Jennejohn
Wolfgang Denk
Bartlomiej Sieka
Stefan Roese
Heiko Schocher
Detlev Zundel
Marian Balakowicz
Markus Klotzbuecher
Markus Klotzbuecher
Wolfgang Denk
Andrei Safronov
Kim Phillips
Timur Tabi