V3s_Allwinner
/
uboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 2 Wiki Activity

Minor cleanup for PCS440EP board 

Patch by Stefan Roese, 13 Jun 2006
This commit is contained in:
Stefan Roese 2006-06-13 18:55:07 +02:00
parent b1d71358a9
commit ed4633c93a
3 changed files with 8 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
CHANGELOG
View File

@ -2,6 +2,9 @@
Changes since U-Boot 1.1.4: Changes since U-Boot 1.1.4:
====================================================================== ======================================================================
* Minor cleanup for PCS440EP board
Patch by Stefan Roese, 13 Jun 2006
* Add MCF5282 support (without preloader) * Add MCF5282 support (without preloader)
relocate ichache_State to ram relocate ichache_State to ram
u-boot can run from internal flash u-boot can run from internal flash

2
cpu/ppc4xx/spd_sdram.c
View File

@ -745,7 +745,7 @@ long int spd_sdram(void) {
*/ */
check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks); check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
#if defined(CONFIG_440GX) #if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
/* /*
* Soft-reset SDRAM controller. * Soft-reset SDRAM controller.
*/ */

8
include/configs/pcs440ep.h
View File

@ -116,18 +116,17 @@
*----------------------------------------------------------------------*/ *----------------------------------------------------------------------*/
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
#undef CONFIG_DDR_ECC /* don't use ECC */ #undef CONFIG_DDR_ECC /* don't use ECC */
#define SPD_EEPROM_ADDRESS {0x50, 0x51} #define SPD_EEPROM_ADDRESS {0x50}
/*----------------------------------------------------------------------- /*-----------------------------------------------------------------------
* I2C * I2C
*----------------------------------------------------------------------*/ *----------------------------------------------------------------------*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F #define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_MULTI_EEPROMS #define CFG_I2C_EEPROM_ADDR (0xa4>>1)
#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
#define CFG_I2C_EEPROM_ADDR_LEN 1 #define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_EEPROM_PAGE_WRITE_ENABLE #define CFG_EEPROM_PAGE_WRITE_ENABLE
#define CFG_EEPROM_PAGE_WRITE_BITS 3 #define CFG_EEPROM_PAGE_WRITE_BITS 3
@ -211,6 +210,7 @@
CFG_CMD_ASKENV | \ CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \ CFG_CMD_DHCP | \
CFG_CMD_DIAG | \ CFG_CMD_DIAG | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \ CFG_CMD_ELF | \
CFG_CMD_I2C | \ CFG_CMD_I2C | \
CFG_CMD_IRQ | \ CFG_CMD_IRQ | \