spl: add USB Gadget config option

Introduce USB Gadget config option. This allows to combine Makefile
entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Ravi Babu <ravibabu@ti.com>

common/spl/Kconfig

@@ -492,17 +492,6 @@ config SPL_SPI_SUPPORT
 	  enable SPI drivers that are needed for other purposes also, such
 	  as a SPI PMIC.
 
-config SPL_USBETH_SUPPORT
-	bool "Support USB Ethernet drivers"
-	depends on SPL
-	help
-	  Enable access to the USB network subsystem and associated
-	  drivers in SPL. This permits SPL to load U-Boot over a
-	  USB-connected Ethernet link (such as a USB Ethernet dongle) rather
-	  than from an onboard peripheral. Environment support is required
-	  since the network stack uses a number of environment variables.
-	  See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT.
-
 config SPL_USB_HOST_SUPPORT
 	bool "Support USB host drivers"
 	depends on SPL
@@ -524,9 +513,27 @@ config SPL_USB_SUPPORT
 	  config options. This enables loading from USB using a configured
 	  device.
 
+config SPL_USB_GADGET_SUPPORT
+	bool "Suppport USB Gadget drivers"
+	depends on SPL
+	help
+	  Enable USB Gadget API which allows to enable USB device functions
+	  in SPL.
+
+if SPL_USB_GADGET_SUPPORT
+
+config SPL_USBETH_SUPPORT
+	bool "Support USB Ethernet drivers"
+	help
+	  Enable access to the USB network subsystem and associated
+	  drivers in SPL. This permits SPL to load U-Boot over a
+	  USB-connected Ethernet link (such as a USB Ethernet dongle) rather
+	  than from an onboard peripheral. Environment support is required
+	  since the network stack uses a number of environment variables.
+	  See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT.
+
 config SPL_DFU_SUPPORT
 	bool "Support DFU (Device Firmware Upgarde)"
-	depends on SPL
 	select SPL_HASH_SUPPORT
 	help
 	  This feature enables the DFU (Device Firmware Upgarde) in SPL with
@@ -550,6 +557,8 @@ config SPL_DFU_RAM
 
 endchoice
 
+endif
+
 config SPL_WATCHDOG_SUPPORT
 	bool "Support watchdog drivers"
 	depends on SPL

configs/am335x_evm_usbspl_defconfig

@@ -12,6 +12,7 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_MUSB_NEW_SUPPORT=y
 CONFIG_SPL_NET_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_GADGET_SUPPORT=y
 CONFIG_SPL_USBETH_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y

drivers/Makefile

@@ -33,9 +33,8 @@ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
-obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
-obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
-obj-$(CONFIG_SPL_DFU_SUPPORT) += usb/gadget/udc/
 obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/

drivers/usb/gadget/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_GADGET) += epautoconf.o config.o usbstring.o
 obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
 
 ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += g_dnl.o
 obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o
 endif
 
@@ -21,8 +22,8 @@ obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o
 obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o
 obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
 obj-$(CONFIG_CI_UDC)	+= ci_udc.o
-obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o
 ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o
 obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
 obj-$(CONFIG_USB_FUNCTION_DFU) += f_dfu.o
 obj-$(CONFIG_USB_FUNCTION_MASS_STORAGE) += f_mass_storage.o

scripts/Makefile.spl

@@ -66,7 +66,7 @@ endif
 
 libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
 libs-y += drivers/
-libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/dwc3/
+libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/
 libs-y += dts/
 libs-y += fs/
 libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/