V3s_Allwinner
/
uboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 2 Wiki Activity

doc: Fix some typos in different files 

adresses/addresses
alernate/alternate
asssuming/assuming
calcualted/calculated
enviroment/environment
evalutation/evaluation
falsh/flash
labled/labeled
paramaters/parameters

Signed-off-by: Thomas Weber <thomas@tomweber.eu>
Acked-by: Anatolij Gustschin <agust@denx.de>
This commit is contained in:
Thomas Weber 2012-03-24 22:44:01 +00:00 committed by Anatolij Gustschin
parent 7e71dc6884
commit c46bf09e0b
17 changed files with 26 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
doc/README.AVR32-port-muxing
View File

@ -91,7 +91,7 @@ of the flags are the same on all implementations.
PORTMUX_DIR_OUTPUT PORTMUX_DIR_OUTPUT
PORTMUX_DIR_INPUT PORTMUX_DIR_INPUT
These mutually-exlusive flags configure the initial direction of the These mutually-exclusive flags configure the initial direction of the
pins. PORTMUX_DIR_OUTPUT means that the pins are driven by the CPU, pins. PORTMUX_DIR_OUTPUT means that the pins are driven by the CPU,
while PORTMUX_DIR_INPUT means that the pins are tristated by the CPU. while PORTMUX_DIR_INPUT means that the pins are tristated by the CPU.
These flags are ignored by portmux_select_peripheral(). These flags are ignored by portmux_select_peripheral().
@ -125,7 +125,7 @@ PORTMUX_PULL_UP.
PORTMUX_DRIVE_HIGH PORTMUX_DRIVE_HIGH
PORTMUX_DRIVE_MAX PORTMUX_DRIVE_MAX
These mutually-exlusive flags determine the drive strength of the These mutually-exclusive flags determine the drive strength of the
pins. PORTMUX_DRIVE_MIN will give low power-consumption, but may cause pins. PORTMUX_DRIVE_MIN will give low power-consumption, but may cause
corruption of high-speed signals. PORTMUX_DRIVE_MAX will give high corruption of high-speed signals. PORTMUX_DRIVE_MAX will give high
power-consumption, but may be necessary on pins toggling at very high power-consumption, but may be necessary on pins toggling at very high

2
doc/README.SNTP
View File

@ -6,7 +6,7 @@ syncronize RTC of the board. This command needs the command line
parameter of server's IP address or environment variable parameter of server's IP address or environment variable
"ntpserverip". The network time is sent as UTC. So if you want to "ntpserverip". The network time is sent as UTC. So if you want to
set local time to RTC, set the offset in second from UTC to the set local time to RTC, set the offset in second from UTC to the
enviroment variable "time offset". environment variable "time offset".
If the DHCP server provides time server's IP or time offset, you If the DHCP server provides time server's IP or time offset, you
don't need to set the above environment variables yourself. don't need to set the above environment variables yourself.

6
doc/README.Sandpoint8240
View File

@ -236,7 +236,7 @@ PART 10)
=> setenv serverip 192.168.0.10 => setenv serverip 192.168.0.10
=> setenv gatewayip=192.168.0.1 => setenv gatewayip=192.168.0.1
=> saveenv => saveenv
Saving Enviroment to Flash... Saving Environment to Flash...
Un-Protected 1 sectors Un-Protected 1 sectors
Erasing Flash... Erasing Flash...
done done
@ -296,7 +296,7 @@ Erase Flash Bank # 2 - missing
=> cp.b 0x100000 FFF00000 1f28c => cp.b 0x100000 FFF00000 1f28c
Copy to Flash... done Copy to Flash... done
=> saveenv => saveenv
Saving Enviroment to Flash... Saving Environment to Flash...
Un-Protected 1 sectors Un-Protected 1 sectors
Erasing Flash... Erasing Flash...
done done
@ -330,7 +330,7 @@ Erase Flash from 0xfff00000 to 0xfff3ffff
done done
Erased 7 sectors Erased 7 sectors
Copy to Flash... done Copy to Flash... done
Saving Enviroment to Flash... Saving Environment to Flash...
Un-Protected 1 sectors Un-Protected 1 sectors
Erasing Flash... Erasing Flash...
done done

6
doc/README.at91
View File

@ -62,16 +62,16 @@ Environment variables
U-Boot environment variables can be stored at different places: U-Boot environment variables can be stored at different places:
- Dataflash on SPI chip select 0 (dataflash card) - Dataflash on SPI chip select 0 (dataflash card)
- Nand flash. - Nand flash.
- Nor falsh (not populate by default) - Nor flash (not populate by default)
You can choose your storage location at config step (here for at91sam9260ek) : You can choose your storage location at config step (here for at91sam9260ek) :
make at91sam9263ek_config - use data flash (spi cs0) (default) make at91sam9263ek_config - use data flash (spi cs0) (default)
make at91sam9263ek_nandflash_config - use nand flash make at91sam9263ek_nandflash_config - use nand flash
make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
make at91sam9263ek_norflash_config - use nor falsh make at91sam9263ek_norflash_config - use nor flash
You can choose to boot directly from U-Boot at config step You can choose to boot directly from U-Boot at config step
make at91sam9263ek_norflash_boot_config - boot from nor falsh make at91sam9263ek_norflash_boot_config - boot from nor flash
------------------------------------------------------------------------------ ------------------------------------------------------------------------------

2
doc/README.ebony
View File

@ -4,7 +4,7 @@
======================================================================= =======================================================================
This file contains some handy info regarding U-Boot and the AMCC This file contains some handy info regarding U-Boot and the AMCC
Ebony evalutation board. See the README.ppc440 for additional Ebony evaluation board. See the README.ppc440 for additional
information. information.

4
doc/README.fsl-ddr
View File

@ -250,7 +250,7 @@ print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
c<n> - the controller number, eg. c0, c1 c<n> - the controller number, eg. c0, c1
d<n> - the DIMM number, eg. d0, d1 d<n> - the DIMM number, eg. d0, d1
spd - print SPD data spd - print SPD data
dimmparms - DIMM paramaters, calcualted from SPD dimmparms - DIMM parameters, calculated from SPD
commonparms - lowest common parameters for all DIMMs commonparms - lowest common parameters for all DIMMs
opts - options opts - options
addresses - address assignment (not implemented yet) addresses - address assignment (not implemented yet)
@ -260,7 +260,7 @@ edit <c#> <d#> <spd|dimmparms|commonparms|opts|addresses|regs> <element> <value>
c<n> - the controller number, eg. c0, c1 c<n> - the controller number, eg. c0, c1
d<n> - the DIMM number, eg. d0, d1 d<n> - the DIMM number, eg. d0, d1
spd - print SPD data spd - print SPD data
dimmparms - DIMM paramaters, calcualted from SPD dimmparms - DIMM parameters, calculated from SPD
commonparms - lowest common parameters for all DIMMs commonparms - lowest common parameters for all DIMMs
opts - options opts - options
addresses - address assignment (not implemented yet) addresses - address assignment (not implemented yet)

2
doc/README.mpc832xemds
View File

@ -15,7 +15,7 @@ Freescale MPC832XEMDS Board
"On" == 0 "On" == 0
SW3 is switch 18 as silk-screened onto the board. SW3 is switch 18 as silk-screened onto the board.
SW4[8] is the bit labled 8 on Switch 4. SW4[8] is the bit labeled 8 on Switch 4.
SW5[1:6] refers to bits labeled 1 through 6 in order on switch 5. SW5[1:6] refers to bits labeled 1 through 6 in order on switch 5.
SW6[7:1] refers to bits labeled 7 through 1 in order on switch 6. SW6[7:1] refers to bits labeled 7 through 1 in order on switch 6.
SW7[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On" SW7[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"

2
doc/README.mpc8360emds
View File

@ -15,7 +15,7 @@ Freescale MPC8360EMDS Board
"On" == 0 "On" == 0
SW18 is switch 18 as silk-screened onto the board. SW18 is switch 18 as silk-screened onto the board.
SW4[8] is the bit labled 8 on Switch 4. SW4[8] is the bit labeled 8 on Switch 4.
SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2. SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3. SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3.
SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On" SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"

2
doc/README.mpc837xemds
View File

@ -14,7 +14,7 @@ Freescale MPC837xEMDS Board
"Off" == 1 "Off" == 1
"On" == 0 "On" == 0
SW4[8] is the bit labled 8 on Switch 4. SW4[8] is the bit labeled 8 on Switch 4.
SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2. SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
SW2[1:8]= 0000_0001 refers to bits labeled 1 through 7 is set as "On" SW2[1:8]= 0000_0001 refers to bits labeled 1 through 7 is set as "On"
and bits labeled 8 is set as "Off". and bits labeled 8 is set as "Off".

2
doc/README.mpc8544ds
View File

@ -22,7 +22,7 @@ boot bank at 0xfff8_0000.
Memory Map Memory Map
---------- ----------
0xff80_0000 - 0xffbf_ffff Alernate bank 4MB 0xff80_0000 - 0xffbf_ffff Alternate bank 4MB
0xffc0_0000 - 0xffff_ffff Boot bank 4MB 0xffc0_0000 - 0xffff_ffff Boot bank 4MB
0xffb8_0000 Alternate image start 512KB 0xffb8_0000 Alternate image start 512KB

4
doc/README.mpc8572ds
View File

@ -19,7 +19,7 @@ Booting is always from the boot bank at 0xec00_0000.
Memory Map Memory Map
---------- ----------
0xe800_0000 - 0xebff_ffff Alernate bank 64MB 0xe800_0000 - 0xebff_ffff Alternate bank 64MB
0xec00_0000 - 0xefff_ffff Boot bank 64MB 0xec00_0000 - 0xefff_ffff Boot bank 64MB
0xebf8_0000 - 0xebff_ffff Alternate u-boot address 512KB 0xebf8_0000 - 0xebff_ffff Alternate u-boot address 512KB
@ -115,7 +115,7 @@ Implementing AMP(Asymmetric MultiProcessing)
- Select "Advanced setup" -> " Prompt for advanced kernel - Select "Advanced setup" -> " Prompt for advanced kernel
configuration options" configuration options"
- Select "Set physical address where the kernel is loaded" and - Select "Set physical address where the kernel is loaded" and
set it to 0x20000000, asssuming core1 will start from 512MB. set it to 0x20000000, assuming core1 will start from 512MB.
- Select "Set custom page offset address" - Select "Set custom page offset address"
- Select "Set custom kernel base address" - Select "Set custom kernel base address"
- Select "Set maximum low memory" - Select "Set maximum low memory"

2
doc/README.mpc85xxads
View File

@ -35,7 +35,7 @@ Updated 13-July-2004 Jon Loeliger
"On" == 0 "On" == 0
SW18 is switch 18 as silk-screened onto the board. SW18 is switch 18 as silk-screened onto the board.
SW4[8] is the bit labled 8 on Switch 4. SW4[8] is the bit labeled 8 on Switch 4.
SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2 SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2
SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3 SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3

2
doc/README.mvbc_p
View File

@ -33,7 +33,7 @@ Matrix Vision mvBlueCOUGAR-P (mvBC-P)
2.4 I2C 2.4 I2C
LM75 @ 0x90 for temperature monitoring. LM75 @ 0x90 for temperature monitoring.
EEPROM @ 0xA0 for vendor specifics. EEPROM @ 0xA0 for vendor specifics.
image sensor interface (slave adresses depend on sensor) image sensor interface (slave addresses depend on sensor)
3 Flash layout. 3 Flash layout.

4
doc/README.mvblm7
View File

@ -40,10 +40,10 @@ Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
MAX5381 DAC @ 0x60 for 1st digital input threshold. MAX5381 DAC @ 0x60 for 1st digital input threshold.
LM75 @ 0x90 for temperature monitoring. LM75 @ 0x90 for temperature monitoring.
EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics. EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
1st image sensor interface (slave adresses depend on sensor) 1st image sensor interface (slave addresses depend on sensor)
Bus2: Bus2:
MAX5381 DAC @ 0x60 for 2nd digital input threshold. MAX5381 DAC @ 0x60 for 2nd digital input threshold.
2nd image sensor interface (slave adresses depend on sensor) 2nd image sensor interface (slave addresses depend on sensor)
3 Flash layout. 3 Flash layout.

2
doc/README.mvsmr
View File

@ -23,7 +23,7 @@ Matrix Vision mvSMR
2.4 I2C 2.4 I2C
EEPROM @ 0xA0 for vendor specifics. EEPROM @ 0xA0 for vendor specifics.
image sensor interface (slave adresses depend on sensor) image sensor interface (slave addresses depend on sensor)
3 Flash layout. 3 Flash layout.

2
doc/README.ocotea
View File

@ -4,7 +4,7 @@
======================================================================= =======================================================================
This file contains some handy info regarding U-Boot and the AMCC This file contains some handy info regarding U-Boot and the AMCC
Ocotea 440gx evalutation board. See the README.ppc440 for additional Ocotea 440gx evaluation board. See the README.ppc440 for additional
information. information.

4
doc/README.p2020rdb
View File

@ -17,7 +17,7 @@ Booting by default is always from the boot bank at 0xef00_0000.
Memory Map Memory Map
---------- ----------
0xef00_0000 - 0xef7f_ffff Alernate bank 8MB 0xef00_0000 - 0xef7f_ffff Alternate bank 8MB
0xe800_0000 - 0xefff_ffff Boot bank 8MB 0xe800_0000 - 0xefff_ffff Boot bank 8MB
0xef78_0000 - 0xef7f_ffff Alternate u-boot address 512KB 0xef78_0000 - 0xef7f_ffff Alternate u-boot address 512KB
@ -89,7 +89,7 @@ Implementing AMP(Asymmetric MultiProcessing)
"Prompt for advanced kernel configuration options" "Prompt for advanced kernel configuration options"
- Select - Select
"Set physical address where the kernel is loaded" "Set physical address where the kernel is loaded"
and set it to 0x20000000, asssuming core1 will and set it to 0x20000000, assuming core1 will
start from 512MB. start from 512MB.
- Select "Set custom page offset address" - Select "Set custom page offset address"
- Select "Set custom kernel base address" - Select "Set custom kernel base address"