omap-common: Common function to display die id, replacing omap3-specific version

This introduces omap_die_id_display to display the full die id.
There is no need to store it in an environment variable, that no boot script
is using anyway.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@konsulko.com>

arch/arm/cpu/armv7/omap-common/utils.c

@@ -83,3 +83,13 @@ void omap_die_id_usbethaddr(void)
 		eth_setenv_enetaddr("usbethaddr", mac);
 	}
 }
+
+void omap_die_id_display(void)
+{
+	unsigned int die_id[4] = { 0 };
+
+	omap_die_id(die_id);
+
+	printf("OMAP die ID: %08x%08x%08x%08x", die_id[0], die_id[1], die_id[2],
+		die_id[3]);
+}

arch/arm/cpu/armv7/omap3/board.c

@@ -214,7 +214,7 @@ void board_init_f(ulong dummy)
  */
 int __weak misc_init_r(void)
 {
-	dieid_num_r();
+	omap_die_id_display();
 
 	return 0;
 }

arch/arm/cpu/armv7/omap3/sys_info.c

@@ -52,28 +52,6 @@ void omap_die_id(unsigned int *die_id)
 	die_id[3] = readl(&id_base->die_id_3);
 }
 
-/*****************************************************************
- * dieid_num_r(void) - read and set die ID
- *****************************************************************/
-void dieid_num_r(void)
-{
-	char *uid_s, die_id[34];
-	u32 id[4];
-
-	memset(die_id, 0, sizeof(die_id));
-
-	uid_s = getenv("dieid#");
-
-	if (uid_s == NULL) {
-		omap_die_id(id);
-		sprintf(die_id, "%08x%08x%08x%08x", id[0], id[1], id[2], id[3]);
-		setenv("dieid#", die_id);
-		uid_s = die_id;
-	}
-
-	printf("Die ID #%s\n", uid_s);
-}
-
 /******************************************
  * get_cpu_type(void) - extract cpu info
  ******************************************/

arch/arm/include/asm/arch-omap3/sys_proto.h

@@ -69,7 +69,6 @@ void sdelay(unsigned long);
 void make_cs1_contiguous(void);
 void omap_nand_switch_ecc(uint32_t, uint32_t);
 void power_init_r(void);
-void dieid_num_r(void);
 void do_omap3_emu_romcode_call(u32 service_id, u32 parameters);
 void omap3_set_aux_cr_secure(u32 acr);
 u32 warm_reset(void);

arch/arm/include/asm/omap_common.h

@@ -605,6 +605,7 @@ s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb);
 
 void omap_die_id_serial(void);
 void omap_die_id_usbethaddr(void);
+void omap_die_id_display(void);
 
 void recalibrate_iodelay(void);
 

board/compulab/cm_t35/cm_t35.c

@@ -110,7 +110,7 @@ u32 get_board_rev(void)
 int misc_init_r(void)
 {
 	cl_print_pcb_info();
-	dieid_num_r();
+	omap_die_id_display();
 
 	return 0;
 }

board/compulab/cm_t3517/cm_t3517.c

@@ -101,7 +101,7 @@ int board_init(void)
 int misc_init_r(void)
 {
 	cl_print_pcb_info();
-	dieid_num_r();
+	omap_die_id_display();
 
 	return 0;
 }

board/corscience/tricorder/tricorder.c

@@ -124,7 +124,7 @@ int misc_init_r(void)
 	status_led_set(1, STATUS_LED_ON);
 	status_led_set(2, STATUS_LED_ON);
 
-	dieid_num_r();
+	omap_die_id_display();
 
 	return 0;
 }

board/isee/igep00x0/igep00x0.c

@@ -171,7 +171,7 @@ int misc_init_r(void)
 
 	setup_net_chip();
 
-	dieid_num_r();
+	omap_die_id_display();
 
 	set_fdt();
 

board/logicpd/am3517evm/am3517evm.c

@@ -109,7 +109,7 @@ int misc_init_r(void)
 	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 
-	dieid_num_r();
+	omap_die_id_display();
 
 	am3517_evm_musb_init();
 

board/logicpd/zoom1/zoom1.c

@@ -80,7 +80,7 @@ int misc_init_r(void)
 {
 	twl4030_power_init();
 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
-	dieid_num_r();
+	omap_die_id_display();
 
 	/*
 	 * Board Reset

board/nokia/rx51/rx51.c

@@ -421,7 +421,7 @@ int misc_init_r(void)
 	/* reuse atags from previous bootloader */
 	reuse_atags();
 
-	dieid_num_r();
+	omap_die_id_display();
 	print_cpuinfo();
 
 	/*

board/overo/overo.c

@@ -285,7 +285,7 @@ int misc_init_r(void)
 	if (expansion_config.content == 1)
 		setenv(expansion_config.env_var, expansion_config.env_setting);
 
-	dieid_num_r();
+	omap_die_id_display();
 
 	if (get_cpu_family() == CPU_OMAP34XX)
 		setenv("boardname", "overo");

board/pandora/pandora.c

@@ -102,7 +102,7 @@ int misc_init_r(void)
 		TWL4030_BB_CFG_BBCHEN | TWL4030_BB_CFG_BBSEL_3200MV |
 		TWL4030_BB_CFG_BBISEL_500UA);
 
-	dieid_num_r();
+	omap_die_id_display();
 
 	return 0;
 }

board/technexion/tao3530/tao3530.c

@@ -160,7 +160,7 @@ int misc_init_r(void)
 		puts("Unknown board revision\n");
 	}
 
-	dieid_num_r();
+	omap_die_id_display();
 
 	return 0;
 }

board/technexion/twister/twister.c

@@ -92,7 +92,7 @@ int misc_init_r(void)
 	struct tam3517_module_info info;
 	int ret;
 
-	dieid_num_r();
+	omap_die_id_display();
 
 	eth_addr = getenv("ethaddr");
 	if (eth_addr)

board/teejet/mt_ventoux/mt_ventoux.c

@@ -257,7 +257,7 @@ int misc_init_r(void)
 	int ret;
 
 	TAM3517_READ_EEPROM(&info, ret);
-	dieid_num_r();
+	omap_die_id_display();
 
 	if (ret)
 		return 0;

board/ti/am3517crane/am3517crane.c

@@ -47,7 +47,7 @@ int misc_init_r(void)
 	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 
-	dieid_num_r();
+	omap_die_id_display();
 
 	return 0;
 }

board/ti/beagle/beagle.c

@@ -494,7 +494,7 @@ int misc_init_r(void)
 	writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
 		GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
 
-	dieid_num_r();
+	omap_die_id_display();
 
 #ifdef CONFIG_VIDEO_OMAP3
 	beagle_dvi_pup();

board/ti/evm/evm.c

@@ -159,7 +159,7 @@ int misc_init_r(void)
 #if defined(CONFIG_CMD_NET)
 	reset_net_chip();
 #endif
-	dieid_num_r();
+	omap_die_id_display();
 
 	return 0;
 }

board/timll/devkit8000/devkit8000.c

@@ -114,7 +114,7 @@ int misc_init_r(void)
 	}
 #endif
 
-	dieid_num_r();
+	omap_die_id_display();
 
 	return 0;
 }