MPC8308RDB: minimal support for devboard from Freescale
This patch provides support for MPC8308RDB development board from Freescale with a minimal set of features: Dual UART is supported NOR flash is supported Both TSEC Ethernet controllers are supported PCI Express initialization is supported The following features are enabled in configuration but not fully tested: I2C (used to get the board revision) I2C-connected RTC VSC7385 switch There is one (hopefully) minor issue: on soft reset the board sometimes resets twice. I've not managed to find the fix for this problem yet. As a workaround instruction cache can be disabled. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
This commit is contained in:
Ilya Yanok
Kim Phillips
parent
7c619ddcee
commit
5fb17030d5
|
|
@ -490,6 +490,10 @@ Stephen Williams <steve@icarus.com>
|
||||||
|
|
||||||
JSE PPC405GPr
|
JSE PPC405GPr
|
||||||
|
|
||||||
|
Ilya Yanok <yanok@emcraft.com>
|
||||||
|
|
||||||
|
MPC8308RDB MPC8308
|
||||||
|
|
||||||
Roy Zang <tie-fei.zang@freescale.com>
|
Roy Zang <tie-fei.zang@freescale.com>
|
||||||
|
|
||||||
mpc7448hpc2 MPC7448
|
mpc7448hpc2 MPC7448
|
||||||
|
|
|
||||||
1
MAKEALL
1
MAKEALL
|
|
@ -360,6 +360,7 @@ LIST_8260=" \
|
||||||
LIST_83xx=" \
|
LIST_83xx=" \
|
||||||
caddy2 \
|
caddy2 \
|
||||||
kmeter1 \
|
kmeter1 \
|
||||||
|
MPC8308RDB \
|
||||||
MPC8313ERDB_33 \
|
MPC8313ERDB_33 \
|
||||||
MPC8313ERDB_NAND_66 \
|
MPC8313ERDB_NAND_66 \
|
||||||
MPC8315ERDB \
|
MPC8315ERDB \
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,52 @@
|
||||||
|
#
|
||||||
|
# (C) Copyright 2006
|
||||||
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||||
|
# (C) Copyright 2010
|
||||||
|
# Ilya Yanok, Emcraft Systems, yanok@emcraft.com
|
||||||
|
#
|
||||||
|
# See file CREDITS for list of people who contributed to this
|
||||||
|
# project.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation; either version 2 of
|
||||||
|
# the License, or (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not, write to the Free Software
|
||||||
|
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
# MA 02111-1307 USA
|
||||||
|
#
|
||||||
|
|
||||||
|
include $(TOPDIR)/config.mk
|
||||||
|
|
||||||
|
LIB = $(obj)lib$(BOARD).a
|
||||||
|
|
||||||
|
COBJS := $(BOARD).o sdram.o
|
||||||
|
|
||||||
|
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||||
|
OBJS := $(addprefix $(obj),$(COBJS))
|
||||||
|
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||||
|
|
||||||
|
$(LIB): $(obj).depend $(OBJS)
|
||||||
|
$(AR) $(ARFLAGS) $@ $(OBJS)
|
||||||
|
|
||||||
|
clean:
|
||||||
|
rm -f $(SOBJS) $(OBJS)
|
||||||
|
|
||||||
|
distclean: clean
|
||||||
|
rm -f $(LIB) core *.bak $(obj).depend
|
||||||
|
|
||||||
|
#########################################################################
|
||||||
|
|
||||||
|
# defines $(obj).depend target
|
||||||
|
include $(SRCTREE)/rules.mk
|
||||||
|
|
||||||
|
sinclude $(obj).depend
|
||||||
|
|
||||||
|
#########################################################################
|
||||||
|
|
@ -0,0 +1 @@
|
||||||
|
TEXT_BASE = 0xFE000000
|
||||||
|
|
@ -0,0 +1,160 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2010 Freescale Semiconductor, Inc.
|
||||||
|
* Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
#include <hwconfig.h>
|
||||||
|
#include <i2c.h>
|
||||||
|
#include <libfdt.h>
|
||||||
|
#include <fdt_support.h>
|
||||||
|
#include <pci.h>
|
||||||
|
#include <mpc83xx.h>
|
||||||
|
#include <vsc7385.h>
|
||||||
|
#include <netdev.h>
|
||||||
|
#include <asm/io.h>
|
||||||
|
#include <asm/fsl_serdes.h>
|
||||||
|
#include <asm/fsl_mpc83xx_serdes.h>
|
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
int board_early_init_f(void)
|
||||||
|
{
|
||||||
|
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
||||||
|
|
||||||
|
if (in_be32(&im->pmc.pmccr1) & PMCCR1_POWER_OFF)
|
||||||
|
gd->flags |= GD_FLG_SILENT;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static u8 read_board_info(void)
|
||||||
|
{
|
||||||
|
u8 val8;
|
||||||
|
i2c_set_bus_num(0);
|
||||||
|
|
||||||
|
if (i2c_read(CONFIG_SYS_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
|
||||||
|
return val8;
|
||||||
|
else
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int checkboard(void)
|
||||||
|
{
|
||||||
|
static const char * const rev_str[] = {
|
||||||
|
"1.0",
|
||||||
|
"<reserved>",
|
||||||
|
"<reserved>",
|
||||||
|
"<reserved>",
|
||||||
|
"<unknown>",
|
||||||
|
};
|
||||||
|
u8 info;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
info = read_board_info();
|
||||||
|
i = (!info) ? 4 : info & 0x03;
|
||||||
|
|
||||||
|
printf("Board: Freescale MPC8308RDB Rev %s\n", rev_str[i]);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pci_region pcie_regions_0[] = {
|
||||||
|
{
|
||||||
|
.bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
|
||||||
|
.phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
|
||||||
|
.size = CONFIG_SYS_PCIE1_MEM_SIZE,
|
||||||
|
.flags = PCI_REGION_MEM,
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.bus_start = CONFIG_SYS_PCIE1_IO_BASE,
|
||||||
|
.phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
|
||||||
|
.size = CONFIG_SYS_PCIE1_IO_SIZE,
|
||||||
|
.flags = PCI_REGION_IO,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
void pci_init_board(void)
|
||||||
|
{
|
||||||
|
immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
|
||||||
|
sysconf83xx_t *sysconf = &immr->sysconf;
|
||||||
|
clk83xx_t *clk = (clk83xx_t *)&immr->clk;
|
||||||
|
law83xx_t *pcie_law = sysconf->pcielaw;
|
||||||
|
struct pci_region *pcie_reg[] = { pcie_regions_0 };
|
||||||
|
|
||||||
|
fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
|
||||||
|
FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
|
||||||
|
|
||||||
|
clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM ,
|
||||||
|
SCCR_PCIEXP1CM_1);
|
||||||
|
|
||||||
|
/* Deassert the resets in the control register */
|
||||||
|
out_be32(&sysconf->pecr1, 0xE0008000);
|
||||||
|
udelay(2000);
|
||||||
|
|
||||||
|
/* Configure PCI Express Local Access Windows */
|
||||||
|
out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
|
||||||
|
out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
|
||||||
|
|
||||||
|
mpc83xx_pcie_init(1, pcie_reg, 0);
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
* Miscellaneous late-boot configurations
|
||||||
|
*
|
||||||
|
* If a VSC7385 microcode image is present, then upload it.
|
||||||
|
*/
|
||||||
|
int misc_init_r(void)
|
||||||
|
{
|
||||||
|
#ifdef CONFIG_VSC7385_IMAGE
|
||||||
|
if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
|
||||||
|
CONFIG_VSC7385_IMAGE_SIZE)) {
|
||||||
|
puts("Failure uploading VSC7385 microcode.\n");
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
||||||
|
void ft_board_setup(void *blob, bd_t *bd)
|
||||||
|
{
|
||||||
|
ft_cpu_setup(blob, bd);
|
||||||
|
fdt_fixup_dr_usb(blob, bd);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
int board_eth_init(bd_t *bis)
|
||||||
|
{
|
||||||
|
int rv, num_if = 0;
|
||||||
|
|
||||||
|
/* Initialize TSECs first */
|
||||||
|
if ((rv = cpu_eth_init(bis)) >= 0)
|
||||||
|
num_if += rv;
|
||||||
|
else
|
||||||
|
printf("ERROR: failed to initialize TSECs.\n");
|
||||||
|
|
||||||
|
if ((rv = pci_eth_init(bis)) >= 0)
|
||||||
|
num_if += rv;
|
||||||
|
else
|
||||||
|
printf("ERROR: failed to initialize PCI Ethernet.\n");
|
||||||
|
|
||||||
|
return num_if;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,126 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2007 Freescale Semiconductor, Inc.
|
||||||
|
* Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
|
||||||
|
*
|
||||||
|
* Authors: Nick.Spence@freescale.com
|
||||||
|
* Wilson.Lo@freescale.com
|
||||||
|
* scottwood@freescale.com
|
||||||
|
*
|
||||||
|
* This files is mostly identical to the original from
|
||||||
|
* board\freescale\mpc8315erdb\sdram.c
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
#include <mpc83xx.h>
|
||||||
|
|
||||||
|
#include <asm/bitops.h>
|
||||||
|
#include <asm/io.h>
|
||||||
|
|
||||||
|
#include <asm/processor.h>
|
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
static void resume_from_sleep(void)
|
||||||
|
{
|
||||||
|
u32 magic = *(u32 *)0;
|
||||||
|
|
||||||
|
typedef void (*func_t)(void);
|
||||||
|
func_t resume = *(func_t *)4;
|
||||||
|
|
||||||
|
if (magic == 0xf5153ae5)
|
||||||
|
resume();
|
||||||
|
|
||||||
|
gd->flags &= ~GD_FLG_SILENT;
|
||||||
|
puts("\nResume from sleep failed: bad magic word\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Fixed sdram init -- doesn't use serial presence detect.
|
||||||
|
*
|
||||||
|
* This is useful for faster booting in configs where the RAM is unlikely
|
||||||
|
* to be changed, or for things like NAND booting where space is tight.
|
||||||
|
*/
|
||||||
|
static long fixed_sdram(void)
|
||||||
|
{
|
||||||
|
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
||||||
|
u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
|
||||||
|
u32 msize_log2 = __ilog2(msize);
|
||||||
|
|
||||||
|
out_be32(&im->sysconf.ddrlaw[0].bar,
|
||||||
|
CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000);
|
||||||
|
out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1));
|
||||||
|
out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
|
||||||
|
* or the DDR2 controller may fail to initialize correctly.
|
||||||
|
*/
|
||||||
|
udelay(50000);
|
||||||
|
|
||||||
|
out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24);
|
||||||
|
out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG);
|
||||||
|
|
||||||
|
/* Currently we use only one CS, so disable the other bank. */
|
||||||
|
out_be32(&im->ddr.cs_config[1], 0);
|
||||||
|
|
||||||
|
out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
|
||||||
|
out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
|
||||||
|
out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
|
||||||
|
out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
|
||||||
|
out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
|
||||||
|
|
||||||
|
if (in_be32(&im->pmc.pmccr1) & PMCCR1_POWER_OFF) {
|
||||||
|
out_be32(&im->ddr.sdram_cfg,
|
||||||
|
CONFIG_SYS_DDR_SDRAM_CFG | SDRAM_CFG_BI);
|
||||||
|
} else {
|
||||||
|
out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
|
||||||
|
}
|
||||||
|
|
||||||
|
out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2);
|
||||||
|
out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
|
||||||
|
out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2);
|
||||||
|
|
||||||
|
out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
|
||||||
|
sync();
|
||||||
|
|
||||||
|
/* enable DDR controller */
|
||||||
|
setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
|
||||||
|
sync();
|
||||||
|
|
||||||
|
return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize);
|
||||||
|
}
|
||||||
|
|
||||||
|
phys_size_t initdram(int board_type)
|
||||||
|
{
|
||||||
|
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
||||||
|
u32 msize;
|
||||||
|
|
||||||
|
if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
|
||||||
|
return -1;
|
||||||
|
|
||||||
|
/* DDR SDRAM */
|
||||||
|
msize = fixed_sdram();
|
||||||
|
|
||||||
|
if (in_be32(&im->pmc.pmccr1) & PMCCR1_POWER_OFF)
|
||||||
|
resume_from_sleep();
|
||||||
|
|
||||||
|
/* return total bus SDRAM size(bytes) -- DDR */
|
||||||
|
return msize;
|
||||||
|
}
|
||||||
|
|
@ -331,6 +331,7 @@ ppmc8260 powerpc mpc8260
|
||||||
RPXsuper powerpc mpc8260 rpxsuper
|
RPXsuper powerpc mpc8260 rpxsuper
|
||||||
rsdproto powerpc mpc8260
|
rsdproto powerpc mpc8260
|
||||||
MPC8266ADS powerpc mpc8260 mpc8266ads freescale
|
MPC8266ADS powerpc mpc8260 mpc8266ads freescale
|
||||||
|
MPC8308RDB powerpc mpc83xx mpc8308rdb freescale
|
||||||
MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
|
MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
|
||||||
MPC8349EMDS powerpc mpc83xx mpc8349emds freescale
|
MPC8349EMDS powerpc mpc83xx mpc8349emds freescale
|
||||||
MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
|
MPC837XERDB powerpc mpc83xx mpc837xerdb freescale
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,560 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
|
||||||
|
* Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
|
||||||
|
*
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __CONFIG_H
|
||||||
|
#define __CONFIG_H
|
||||||
|
|
||||||
|
/*
|
||||||
|
* High Level Configuration Options
|
||||||
|
*/
|
||||||
|
#define CONFIG_E300 1 /* E300 family */
|
||||||
|
#define CONFIG_MPC83xx 1 /* MPC83xx family */
|
||||||
|
#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */
|
||||||
|
#define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */
|
||||||
|
|
||||||
|
#define CONFIG_MISC_INIT_R
|
||||||
|
|
||||||
|
/*
|
||||||
|
* On-board devices
|
||||||
|
*
|
||||||
|
* TSEC1 is SoC TSEC
|
||||||
|
* TSEC2 is VSC switch
|
||||||
|
*/
|
||||||
|
#define CONFIG_TSEC1
|
||||||
|
#define CONFIG_VSC7385_ENET
|
||||||
|
|
||||||
|
/*
|
||||||
|
* System Clock Setup
|
||||||
|
*/
|
||||||
|
#define CONFIG_83XX_CLKIN 33333333 /* in Hz */
|
||||||
|
#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Hardware Reset Configuration Word
|
||||||
|
* if CLKIN is 66.66MHz, then
|
||||||
|
* CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz
|
||||||
|
* We choose the A type silicon as default, so the core is 400Mhz.
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_HRCW_LOW (\
|
||||||
|
HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
|
||||||
|
HRCWL_DDR_TO_SCB_CLK_2X1 |\
|
||||||
|
HRCWL_SVCOD_DIV_2 |\
|
||||||
|
HRCWL_CSB_TO_CLKIN_4X1 |\
|
||||||
|
HRCWL_CORE_TO_CSB_3X1)
|
||||||
|
/*
|
||||||
|
* There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits
|
||||||
|
* in 8308's HRCWH according to the manual, but original Freescale's
|
||||||
|
* code has them and I've expirienced some problems using the board
|
||||||
|
* with BDI3000 attached when I've tried to set these bits to zero
|
||||||
|
* (UART doesn't work after the 'reset run' command).
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_HRCW_HIGH (\
|
||||||
|
HRCWH_PCI_HOST |\
|
||||||
|
HRCWH_PCI1_ARBITER_ENABLE |\
|
||||||
|
HRCWH_CORE_ENABLE |\
|
||||||
|
HRCWH_FROM_0X00000100 |\
|
||||||
|
HRCWH_BOOTSEQ_DISABLE |\
|
||||||
|
HRCWH_SW_WATCHDOG_DISABLE |\
|
||||||
|
HRCWH_ROM_LOC_LOCAL_16BIT |\
|
||||||
|
HRCWH_RL_EXT_LEGACY |\
|
||||||
|
HRCWH_TSEC1M_IN_RGMII |\
|
||||||
|
HRCWH_TSEC2M_IN_RGMII |\
|
||||||
|
HRCWH_BIG_ENDIAN)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* System IO Config
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_SICRH 0x01b7d103
|
||||||
|
#define CONFIG_SYS_SICRL 0x00000040 /* 3.3V, no delay */
|
||||||
|
|
||||||
|
#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* IMMR new address
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_IMMR 0xE0000000
|
||||||
|
|
||||||
|
/*
|
||||||
|
* SERDES
|
||||||
|
*/
|
||||||
|
#define CONFIG_FSL_SERDES
|
||||||
|
#define CONFIG_FSL_SERDES1 0xe3000
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Arbiter Setup
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */
|
||||||
|
#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */
|
||||||
|
#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* DDR Setup
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */
|
||||||
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
||||||
|
#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
||||||
|
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
|
||||||
|
#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
|
||||||
|
| DDRCDR_PZ_LOZ \
|
||||||
|
| DDRCDR_NZ_LOZ \
|
||||||
|
| DDRCDR_ODT \
|
||||||
|
| DDRCDR_Q_DRN)
|
||||||
|
/* 0x7b880001 */
|
||||||
|
/*
|
||||||
|
* Manually set up DDR parameters
|
||||||
|
* consist of two chips HY5PS12621BFP-C4 from HYNIX
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define CONFIG_SYS_DDR_SIZE 128 /* MB */
|
||||||
|
|
||||||
|
#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007
|
||||||
|
#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
|
||||||
|
| 0x00010000 /* ODT_WR to CSn */ \
|
||||||
|
| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
|
||||||
|
/* 0x80010102 */
|
||||||
|
#define CONFIG_SYS_DDR_TIMING_3 0x00000000
|
||||||
|
#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
|
||||||
|
| (0 << TIMING_CFG0_WRT_SHIFT) \
|
||||||
|
| (0 << TIMING_CFG0_RRT_SHIFT) \
|
||||||
|
| (0 << TIMING_CFG0_WWT_SHIFT) \
|
||||||
|
| (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
|
||||||
|
| (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
|
||||||
|
| (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
|
||||||
|
| (2 << TIMING_CFG0_MRS_CYC_SHIFT))
|
||||||
|
/* 0x00220802 */
|
||||||
|
#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
|
||||||
|
| (7 << TIMING_CFG1_ACTTOPRE_SHIFT) \
|
||||||
|
| (2 << TIMING_CFG1_ACTTORW_SHIFT) \
|
||||||
|
| (5 << TIMING_CFG1_CASLAT_SHIFT) \
|
||||||
|
| (6 << TIMING_CFG1_REFREC_SHIFT) \
|
||||||
|
| (2 << TIMING_CFG1_WRREC_SHIFT) \
|
||||||
|
| (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
|
||||||
|
| (2 << TIMING_CFG1_WRTORD_SHIFT))
|
||||||
|
/* 0x27256222 */
|
||||||
|
#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
|
||||||
|
| (4 << TIMING_CFG2_CPO_SHIFT) \
|
||||||
|
| (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
|
||||||
|
| (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
|
||||||
|
| (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
|
||||||
|
| (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
|
||||||
|
| (5 << TIMING_CFG2_FOUR_ACT_SHIFT))
|
||||||
|
/* 0x121048c5 */
|
||||||
|
#define CONFIG_SYS_DDR_INTERVAL ((0x0360 << SDRAM_INTERVAL_REFINT_SHIFT) \
|
||||||
|
| (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
|
||||||
|
/* 0x03600100 */
|
||||||
|
#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \
|
||||||
|
| SDRAM_CFG_SDRAM_TYPE_DDR2 \
|
||||||
|
| SDRAM_CFG_32_BE)
|
||||||
|
/* 0x43080000 */
|
||||||
|
|
||||||
|
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */
|
||||||
|
#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \
|
||||||
|
| (0x0232 << SDRAM_MODE_SD_SHIFT))
|
||||||
|
/* ODT 150ohm CL=3, AL=1 on SDRAM */
|
||||||
|
#define CONFIG_SYS_DDR_MODE2 0x00000000
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Memory test
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_MEMTEST_START 0x00001000 /* memtest region */
|
||||||
|
#define CONFIG_SYS_MEMTEST_END 0x07f00000
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The reserved memory
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||||
|
|
||||||
|
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
|
||||||
|
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Initial RAM Base Address Setup
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
||||||
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
|
||||||
|
#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */
|
||||||
|
#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
|
||||||
|
#define CONFIG_SYS_GBL_DATA_OFFSET \
|
||||||
|
(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Local Bus Configuration & Clock Setup
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP
|
||||||
|
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
|
||||||
|
#define CONFIG_SYS_LBC_LBCR 0x00040000
|
||||||
|
|
||||||
|
/*
|
||||||
|
* FLASH on the Local Bus
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
|
||||||
|
#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
|
||||||
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
||||||
|
|
||||||
|
#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */
|
||||||
|
#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */
|
||||||
|
#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */
|
||||||
|
|
||||||
|
/* Window base at flash base */
|
||||||
|
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
|
||||||
|
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */
|
||||||
|
|
||||||
|
#define CONFIG_SYS_BR0_PRELIM (\
|
||||||
|
CONFIG_SYS_FLASH_BASE /* Flash Base address */ |\
|
||||||
|
(2 << BR_PS_SHIFT) /* 16 bit port size */ |\
|
||||||
|
BR_V) /* valid */
|
||||||
|
#define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \
|
||||||
|
| OR_UPM_XAM \
|
||||||
|
| OR_GPCM_CSNT \
|
||||||
|
| OR_GPCM_ACS_DIV2 \
|
||||||
|
| OR_GPCM_XACS \
|
||||||
|
| OR_GPCM_SCY_15 \
|
||||||
|
| OR_GPCM_TRLX \
|
||||||
|
| OR_GPCM_EHTR \
|
||||||
|
| OR_GPCM_EAD)
|
||||||
|
|
||||||
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
||||||
|
/* 127 64KB sectors and 8 8KB top sectors per device */
|
||||||
|
#define CONFIG_SYS_MAX_FLASH_SECT 135
|
||||||
|
|
||||||
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
||||||
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* NAND Flash on the Local Bus
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */
|
||||||
|
#define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \
|
||||||
|
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
|
||||||
|
| BR_PS_8 /* Port Size = 8 bit */ \
|
||||||
|
| BR_MS_FCM /* MSEL = FCM */ \
|
||||||
|
| BR_V ) /* valid */
|
||||||
|
#define CONFIG_SYS_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \
|
||||||
|
| OR_FCM_CSCT \
|
||||||
|
| OR_FCM_CST \
|
||||||
|
| OR_FCM_CHT \
|
||||||
|
| OR_FCM_SCY_1 \
|
||||||
|
| OR_FCM_TRLX \
|
||||||
|
| OR_FCM_EHTR )
|
||||||
|
/* 0xFFFF8396 */
|
||||||
|
|
||||||
|
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
|
||||||
|
#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
|
||||||
|
|
||||||
|
#ifdef CONFIG_VSC7385_ENET
|
||||||
|
#define CONFIG_TSEC2
|
||||||
|
#define CONFIG_SYS_VSC7385_BASE 0xF0000000
|
||||||
|
#define CONFIG_SYS_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */
|
||||||
|
#define CONFIG_SYS_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/
|
||||||
|
/* Access window base at VSC7385 base */
|
||||||
|
#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE
|
||||||
|
/* Access window size 128K */
|
||||||
|
#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010
|
||||||
|
/* The flash address and size of the VSC7385 firmware image */
|
||||||
|
#define CONFIG_VSC7385_IMAGE 0xFE7FE000
|
||||||
|
#define CONFIG_VSC7385_IMAGE_SIZE 8192
|
||||||
|
#endif
|
||||||
|
/*
|
||||||
|
* Serial Port
|
||||||
|
*/
|
||||||
|
#define CONFIG_CONS_INDEX 1
|
||||||
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
||||||
|
#define CONFIG_SYS_NS16550
|
||||||
|
#define CONFIG_SYS_NS16550_SERIAL
|
||||||
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
||||||
|
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
|
||||||
|
|
||||||
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||||
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
||||||
|
|
||||||
|
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
|
||||||
|
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
|
||||||
|
|
||||||
|
/* Use the HUSH parser */
|
||||||
|
#define CONFIG_SYS_HUSH_PARSER
|
||||||
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||||
|
|
||||||
|
/* Pass open firmware flat tree */
|
||||||
|
#define CONFIG_OF_LIBFDT 1
|
||||||
|
#define CONFIG_OF_BOARD_SETUP 1
|
||||||
|
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
|
||||||
|
|
||||||
|
/* I2C */
|
||||||
|
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
||||||
|
#define CONFIG_FSL_I2C
|
||||||
|
#define CONFIG_I2C_MULTI_BUS
|
||||||
|
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||||
|
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
||||||
|
#define CONFIG_SYS_I2C_NOPROBES {{0x51}} /* Don't probe these addrs */
|
||||||
|
#define CONFIG_SYS_I2C_OFFSET 0x3000
|
||||||
|
#define CONFIG_SYS_I2C2_OFFSET 0x3100
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Board info - revision and where boot from
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_I2C_PCF8574A_ADDR 0x39
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Config on-board RTC
|
||||||
|
*/
|
||||||
|
#define CONFIG_RTC_DS1337 /* ds1339 on board, use ds1337 rtc via i2c */
|
||||||
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* General PCI
|
||||||
|
* Addresses are mapped 1-1.
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_PCIE1_BASE 0xA0000000
|
||||||
|
#define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000
|
||||||
|
#define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000
|
||||||
|
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000
|
||||||
|
#define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000
|
||||||
|
#define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000
|
||||||
|
#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
|
||||||
|
#define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000
|
||||||
|
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Fake PCIE2 definitions: there is no PCIE2 on this board but the code
|
||||||
|
* in arch/powerpc/cpu/mpc83xx/pcie.c doesn't compile without this
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_PCIE2_BASE 0xC0000000
|
||||||
|
#define CONFIG_SYS_PCIE2_MEM_BASE 0xC0000000
|
||||||
|
#define CONFIG_SYS_PCIE2_MEM_PHYS 0xC0000000
|
||||||
|
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000
|
||||||
|
#define CONFIG_SYS_PCIE2_CFG_BASE 0xD0000000
|
||||||
|
#define CONFIG_SYS_PCIE2_CFG_SIZE 0x01000000
|
||||||
|
#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
|
||||||
|
#define CONFIG_SYS_PCIE2_IO_PHYS 0xD1000000
|
||||||
|
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000
|
||||||
|
|
||||||
|
#define CONFIG_PCI
|
||||||
|
#define CONFIG_PCIE
|
||||||
|
|
||||||
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||||
|
|
||||||
|
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
|
||||||
|
#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* TSEC
|
||||||
|
*/
|
||||||
|
#define CONFIG_NET_MULTI
|
||||||
|
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
|
||||||
|
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
|
||||||
|
#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
|
||||||
|
#define CONFIG_SYS_TSEC2_OFFSET 0x25000
|
||||||
|
#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* TSEC ethernet configuration
|
||||||
|
*/
|
||||||
|
#define CONFIG_MII 1 /* MII PHY management */
|
||||||
|
#define CONFIG_TSEC1_NAME "eTSEC0"
|
||||||
|
#define CONFIG_TSEC2_NAME "eTSEC1"
|
||||||
|
#define TSEC1_PHY_ADDR 2
|
||||||
|
#define TSEC2_PHY_ADDR 1
|
||||||
|
#define TSEC1_PHYIDX 0
|
||||||
|
#define TSEC2_PHYIDX 0
|
||||||
|
#define TSEC1_FLAGS TSEC_GIGABIT
|
||||||
|
#define TSEC2_FLAGS TSEC_GIGABIT
|
||||||
|
|
||||||
|
/* Options are: eTSEC[0-1] */
|
||||||
|
#define CONFIG_ETHPRIME "eTSEC0"
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Environment
|
||||||
|
*/
|
||||||
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||||
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
|
||||||
|
CONFIG_SYS_MONITOR_LEN)
|
||||||
|
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
|
||||||
|
#define CONFIG_ENV_SIZE 0x2000
|
||||||
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
|
||||||
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
||||||
|
|
||||||
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||||
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* BOOTP options
|
||||||
|
*/
|
||||||
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||||
|
#define CONFIG_BOOTP_BOOTPATH
|
||||||
|
#define CONFIG_BOOTP_GATEWAY
|
||||||
|
#define CONFIG_BOOTP_HOSTNAME
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Command line configuration.
|
||||||
|
*/
|
||||||
|
#include <config_cmd_default.h>
|
||||||
|
|
||||||
|
#define CONFIG_CMD_DATE
|
||||||
|
#define CONFIG_CMD_DHCP
|
||||||
|
#define CONFIG_CMD_I2C
|
||||||
|
#define CONFIG_CMD_MII
|
||||||
|
#define CONFIG_CMD_NET
|
||||||
|
#define CONFIG_CMD_PCI
|
||||||
|
#define CONFIG_CMD_PING
|
||||||
|
|
||||||
|
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Miscellaneous configurable options
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||||
|
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
||||||
|
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
||||||
|
|
||||||
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||||
|
|
||||||
|
/* Print Buffer Size */
|
||||||
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||||
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||||
|
/* Boot Argument Buffer Size */
|
||||||
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||||
|
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For booting Linux, the board info and command line data
|
||||||
|
* have to be in the first 8 MB of memory, since this is
|
||||||
|
* the maximum mapped by the Linux kernel during initialization.
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Core HID Setup
|
||||||
|
*/
|
||||||
|
#define CONFIG_SYS_HID0_INIT 0x000000000
|
||||||
|
#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
|
||||||
|
HID0_ENABLE_INSTRUCTION_CACHE | \
|
||||||
|
HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
|
||||||
|
#define CONFIG_SYS_HID2 HID2_HBE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MMU Setup
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* DDR: cache cacheable */
|
||||||
|
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
|
||||||
|
BATL_MEMCOHERENCE)
|
||||||
|
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \
|
||||||
|
BATU_VS | BATU_VP)
|
||||||
|
#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
|
||||||
|
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
|
||||||
|
|
||||||
|
/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
|
||||||
|
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \
|
||||||
|
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
||||||
|
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \
|
||||||
|
BATU_VP)
|
||||||
|
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
|
||||||
|
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
|
||||||
|
|
||||||
|
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
|
||||||
|
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
|
||||||
|
BATL_MEMCOHERENCE)
|
||||||
|
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \
|
||||||
|
BATU_VS | BATU_VP)
|
||||||
|
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
|
||||||
|
BATL_CACHEINHIBIT | \
|
||||||
|
BATL_GUARDEDSTORAGE)
|
||||||
|
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
|
||||||
|
|
||||||
|
/* Stack in dcache: cacheable, no memory coherence */
|
||||||
|
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
|
||||||
|
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
|
||||||
|
BATU_VS | BATU_VP)
|
||||||
|
#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
|
||||||
|
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Internal Definitions
|
||||||
|
*
|
||||||
|
* Boot Flags
|
||||||
|
*/
|
||||||
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||||
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Environment Configuration
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define CONFIG_ENV_OVERWRITE
|
||||||
|
|
||||||
|
#if defined(CONFIG_TSEC_ENET)
|
||||||
|
#define CONFIG_HAS_ETH0
|
||||||
|
#define CONFIG_HAS_ETH1
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define CONFIG_BAUDRATE 115200
|
||||||
|
|
||||||
|
#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
|
||||||
|
|
||||||
|
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
|
||||||
|
|
||||||
|
#define xstr(s) str(s)
|
||||||
|
#define str(s) #s
|
||||||
|
|
||||||
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||||
|
"netdev=eth0\0" \
|
||||||
|
"consoledev=ttyS0\0" \
|
||||||
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||||
|
"nfsroot=${serverip}:${rootpath}\0" \
|
||||||
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||||
|
"addip=setenv bootargs ${bootargs} " \
|
||||||
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||||
|
":${hostname}:${netdev}:off panic=1\0" \
|
||||||
|
"addtty=setenv bootargs ${bootargs}" \
|
||||||
|
" console=${consoledev},${baudrate}\0" \
|
||||||
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
||||||
|
"addmisc=setenv bootargs ${bootargs}\0" \
|
||||||
|
"kernel_addr=FE080000\0" \
|
||||||
|
"fdt_addr=FE280000\0" \
|
||||||
|
"ramdisk_addr=FE290000\0" \
|
||||||
|
"u-boot=mpc8308rdb/u-boot.bin\0" \
|
||||||
|
"kernel_addr_r=1000000\0" \
|
||||||
|
"fdt_addr_r=C00000\0" \
|
||||||
|
"hostname=mpc8308rdb\0" \
|
||||||
|
"bootfile=mpc8308rdb/uImage\0" \
|
||||||
|
"fdtfile=mpc8308rdb/mpc8308rdb.dtb\0" \
|
||||||
|
"rootpath=/opt/eldk-4.2/ppc_6xx\0" \
|
||||||
|
"flash_self=run ramargs addip addtty addmtd addmisc;" \
|
||||||
|
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
|
||||||
|
"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
|
||||||
|
"bootm ${kernel_addr} - ${fdt_addr}\0" \
|
||||||
|
"net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
|
||||||
|
"tftp ${fdt_addr_r} ${fdtfile};" \
|
||||||
|
"run nfsargs addip addtty addmtd addmisc;" \
|
||||||
|
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
||||||
|
"bootcmd=run flash_self\0" \
|
||||||
|
"load=tftp ${loadaddr} ${u-boot}\0" \
|
||||||
|
"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
|
||||||
|
" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
|
||||||
|
" +${filesize};cp.b ${fileaddr} " \
|
||||||
|
xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
|
||||||
|
"upd=run load update\0" \
|
||||||
|
|
||||||
|
#endif /* __CONFIG_H */
|
||||||
Loading…
Reference in New Issue