s3c44b0: move i2c driver to drivers/i2c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This commit is contained in:
Jean-Christophe PLAGNIOL-VILLARD
parent
281dfb0c0c
commit
50f601cca8
|
|
@ -220,294 +220,3 @@ void rtc_reset (void)
|
|||
BCDSEC = 0;
|
||||
RTCCON &= 1;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
I2C stuff
|
||||
*/
|
||||
|
||||
/*
|
||||
* Initialization, must be called once on start up, may be called
|
||||
* repeatedly to change the speed and slave addresses.
|
||||
*/
|
||||
void i2c_init(int speed, int slaveaddr)
|
||||
{
|
||||
/*
|
||||
setting up I2C support
|
||||
*/
|
||||
unsigned int save_F,save_PF,rIICCON,rPCONA,rPDATA,rPCONF,rPUPF;
|
||||
|
||||
save_F = PCONF;
|
||||
save_PF = PUPF;
|
||||
|
||||
rPCONF = ((save_F & ~(0xF))| 0xa);
|
||||
rPUPF = (save_PF | 0x3);
|
||||
PCONF = rPCONF; /*PF0:IICSCL, PF1:IICSDA*/
|
||||
PUPF = rPUPF; /* Disable pull-up */
|
||||
|
||||
/* Configuring pin for WC pin of EEprom */
|
||||
rPCONA = PCONA;
|
||||
rPCONA &= ~(1<<9);
|
||||
PCONA = rPCONA;
|
||||
|
||||
rPDATA = PDATA;
|
||||
rPDATA &= ~(1<<9);
|
||||
PDATA = rPDATA;
|
||||
|
||||
/*
|
||||
Enable ACK, IICCLK=MCLK/16, enable interrupt
|
||||
75MHz/16/(12+1) = 390625 Hz
|
||||
*/
|
||||
rIICCON=(1<<7)|(0<<6)|(1<<5)|(0xC);
|
||||
IICCON = rIICCON;
|
||||
|
||||
IICADD = slaveaddr;
|
||||
}
|
||||
|
||||
/*
|
||||
* Probe the given I2C chip address. Returns 0 if a chip responded,
|
||||
* not 0 on failure.
|
||||
*/
|
||||
int i2c_probe(uchar chip)
|
||||
{
|
||||
/*
|
||||
not implemented
|
||||
*/
|
||||
|
||||
printf("i2c_probe chip %d\n", (int) chip);
|
||||
return -1;
|
||||
}
|
||||
|
||||
/*
|
||||
* Read/Write interface:
|
||||
* chip: I2C chip address, range 0..127
|
||||
* addr: Memory (register) address within the chip
|
||||
* alen: Number of bytes to use for addr (typically 1, 2 for larger
|
||||
* memories, 0 for register type devices with only one
|
||||
* register)
|
||||
* buffer: Where to read/write the data
|
||||
* len: How many bytes to read/write
|
||||
*
|
||||
* Returns: 0 on success, not 0 on failure
|
||||
*/
|
||||
|
||||
#define S3C44B0X_rIIC_INTPEND (1<<4)
|
||||
#define S3C44B0X_rIIC_LAST_RECEIV_BIT (1<<0)
|
||||
#define S3C44B0X_rIIC_INTERRUPT_ENABLE (1<<5)
|
||||
#define S3C44B0_IIC_TIMEOUT 100
|
||||
|
||||
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
||||
{
|
||||
|
||||
int k, j, temp;
|
||||
u32 rIICSTAT;
|
||||
|
||||
/*
|
||||
send the device offset
|
||||
*/
|
||||
|
||||
rIICSTAT = 0xD0;
|
||||
IICSTAT = rIICSTAT;
|
||||
|
||||
IICDS = chip; /* this is a write operation... */
|
||||
|
||||
rIICSTAT |= (1<<5);
|
||||
IICSTAT = rIICSTAT;
|
||||
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
/* wait and check ACK */
|
||||
temp = IICSTAT;
|
||||
if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
|
||||
return -1;
|
||||
|
||||
IICDS = addr;
|
||||
IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
/* wait and check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
temp = IICSTAT;
|
||||
if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
|
||||
return -1;
|
||||
|
||||
/*
|
||||
now we can start with the read operation...
|
||||
*/
|
||||
|
||||
IICDS = chip | 0x01; /* this is a read operation... */
|
||||
|
||||
rIICSTAT = 0x90; /*master recv*/
|
||||
rIICSTAT |= (1<<5);
|
||||
IICSTAT = rIICSTAT;
|
||||
|
||||
IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
/* wait and check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
temp = IICSTAT;
|
||||
if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
|
||||
return -1;
|
||||
|
||||
for (j=0; j<len-1; j++) {
|
||||
|
||||
/*clear pending bit to resume */
|
||||
|
||||
temp = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
IICCON = temp;
|
||||
|
||||
/* wait and check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
|
||||
buffer[j] = IICDS; /*save readed data*/
|
||||
|
||||
} /*end for(j)*/
|
||||
|
||||
/*
|
||||
reading the last data
|
||||
unset ACK generation
|
||||
*/
|
||||
temp = IICCON & ~(S3C44B0X_rIIC_INTPEND | (1<<7));
|
||||
IICCON = temp;
|
||||
|
||||
/* wait but NOT check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
buffer[j] = IICDS; /*save readed data*/
|
||||
|
||||
rIICSTAT = 0x90; /*master recv*/
|
||||
|
||||
/* Write operation Terminate sending STOP */
|
||||
IICSTAT = rIICSTAT;
|
||||
/*Clear Int Pending Bit to RESUME*/
|
||||
temp = IICCON;
|
||||
IICCON = temp & (~S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
IICCON = IICCON | (1<<7); /*restore ACK generation*/
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
||||
{
|
||||
int j, k;
|
||||
u32 rIICSTAT, temp;
|
||||
|
||||
|
||||
/*
|
||||
send the device offset
|
||||
*/
|
||||
|
||||
rIICSTAT = 0xD0;
|
||||
IICSTAT = rIICSTAT;
|
||||
|
||||
IICDS = chip; /* this is a write operation... */
|
||||
|
||||
rIICSTAT |= (1<<5);
|
||||
IICSTAT = rIICSTAT;
|
||||
|
||||
IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
/* wait and check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
temp = IICSTAT;
|
||||
if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
|
||||
return -1;
|
||||
|
||||
IICDS = addr;
|
||||
IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
/* wait and check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
temp = IICSTAT;
|
||||
if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
|
||||
return -1;
|
||||
|
||||
/*
|
||||
now we can start with the read write operation
|
||||
*/
|
||||
for (j=0; j<len; j++) {
|
||||
|
||||
IICDS = buffer[j]; /*prerare data to write*/
|
||||
|
||||
/*clear pending bit to resume*/
|
||||
|
||||
temp = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
IICCON = temp;
|
||||
|
||||
/* wait but NOT check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
|
||||
udelay(2000);
|
||||
}
|
||||
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
} /* end for(j) */
|
||||
|
||||
/* sending stop to terminate */
|
||||
rIICSTAT = 0xD0; /*master send*/
|
||||
IICSTAT = rIICSTAT;
|
||||
/*Clear Int Pending Bit to RESUME*/
|
||||
temp = IICCON;
|
||||
IICCON = temp & (~S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -31,6 +31,7 @@ COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
|
|||
COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
|
||||
COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
|
||||
COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
|
||||
COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
|
||||
COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
|
||||
COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,315 @@
|
|||
/*
|
||||
* (C) Copyright 2004
|
||||
* DAVE Srl
|
||||
* http://www.dave-tech.it
|
||||
* http://www.wawnet.biz
|
||||
* mailto:info@wawnet.biz
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include <asm/hardware.h>
|
||||
|
||||
/*
|
||||
* Initialization, must be called once on start up, may be called
|
||||
* repeatedly to change the speed and slave addresses.
|
||||
*/
|
||||
void i2c_init(int speed, int slaveaddr)
|
||||
{
|
||||
/*
|
||||
setting up I2C support
|
||||
*/
|
||||
unsigned int save_F,save_PF,rIICCON,rPCONA,rPDATA,rPCONF,rPUPF;
|
||||
|
||||
save_F = PCONF;
|
||||
save_PF = PUPF;
|
||||
|
||||
rPCONF = ((save_F & ~(0xF))| 0xa);
|
||||
rPUPF = (save_PF | 0x3);
|
||||
PCONF = rPCONF; /*PF0:IICSCL, PF1:IICSDA*/
|
||||
PUPF = rPUPF; /* Disable pull-up */
|
||||
|
||||
/* Configuring pin for WC pin of EEprom */
|
||||
rPCONA = PCONA;
|
||||
rPCONA &= ~(1<<9);
|
||||
PCONA = rPCONA;
|
||||
|
||||
rPDATA = PDATA;
|
||||
rPDATA &= ~(1<<9);
|
||||
PDATA = rPDATA;
|
||||
|
||||
/*
|
||||
Enable ACK, IICCLK=MCLK/16, enable interrupt
|
||||
75MHz/16/(12+1) = 390625 Hz
|
||||
*/
|
||||
rIICCON=(1<<7)|(0<<6)|(1<<5)|(0xC);
|
||||
IICCON = rIICCON;
|
||||
|
||||
IICADD = slaveaddr;
|
||||
}
|
||||
|
||||
/*
|
||||
* Probe the given I2C chip address. Returns 0 if a chip responded,
|
||||
* not 0 on failure.
|
||||
*/
|
||||
int i2c_probe(uchar chip)
|
||||
{
|
||||
/*
|
||||
not implemented
|
||||
*/
|
||||
|
||||
printf("i2c_probe chip %d\n", (int) chip);
|
||||
return -1;
|
||||
}
|
||||
|
||||
/*
|
||||
* Read/Write interface:
|
||||
* chip: I2C chip address, range 0..127
|
||||
* addr: Memory (register) address within the chip
|
||||
* alen: Number of bytes to use for addr (typically 1, 2 for larger
|
||||
* memories, 0 for register type devices with only one
|
||||
* register)
|
||||
* buffer: Where to read/write the data
|
||||
* len: How many bytes to read/write
|
||||
*
|
||||
* Returns: 0 on success, not 0 on failure
|
||||
*/
|
||||
|
||||
#define S3C44B0X_rIIC_INTPEND (1<<4)
|
||||
#define S3C44B0X_rIIC_LAST_RECEIV_BIT (1<<0)
|
||||
#define S3C44B0X_rIIC_INTERRUPT_ENABLE (1<<5)
|
||||
#define S3C44B0_IIC_TIMEOUT 100
|
||||
|
||||
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
||||
{
|
||||
|
||||
int k, j, temp;
|
||||
u32 rIICSTAT;
|
||||
|
||||
/*
|
||||
send the device offset
|
||||
*/
|
||||
|
||||
rIICSTAT = 0xD0;
|
||||
IICSTAT = rIICSTAT;
|
||||
|
||||
IICDS = chip; /* this is a write operation... */
|
||||
|
||||
rIICSTAT |= (1<<5);
|
||||
IICSTAT = rIICSTAT;
|
||||
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
/* wait and check ACK */
|
||||
temp = IICSTAT;
|
||||
if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
|
||||
return -1;
|
||||
|
||||
IICDS = addr;
|
||||
IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
/* wait and check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
temp = IICSTAT;
|
||||
if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
|
||||
return -1;
|
||||
|
||||
/*
|
||||
now we can start with the read operation...
|
||||
*/
|
||||
|
||||
IICDS = chip | 0x01; /* this is a read operation... */
|
||||
|
||||
rIICSTAT = 0x90; /*master recv*/
|
||||
rIICSTAT |= (1<<5);
|
||||
IICSTAT = rIICSTAT;
|
||||
|
||||
IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
/* wait and check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
temp = IICSTAT;
|
||||
if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
|
||||
return -1;
|
||||
|
||||
for (j=0; j<len-1; j++) {
|
||||
|
||||
/*clear pending bit to resume */
|
||||
|
||||
temp = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
IICCON = temp;
|
||||
|
||||
/* wait and check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
|
||||
buffer[j] = IICDS; /*save readed data*/
|
||||
|
||||
} /*end for(j)*/
|
||||
|
||||
/*
|
||||
reading the last data
|
||||
unset ACK generation
|
||||
*/
|
||||
temp = IICCON & ~(S3C44B0X_rIIC_INTPEND | (1<<7));
|
||||
IICCON = temp;
|
||||
|
||||
/* wait but NOT check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
buffer[j] = IICDS; /*save readed data*/
|
||||
|
||||
rIICSTAT = 0x90; /*master recv*/
|
||||
|
||||
/* Write operation Terminate sending STOP */
|
||||
IICSTAT = rIICSTAT;
|
||||
/*Clear Int Pending Bit to RESUME*/
|
||||
temp = IICCON;
|
||||
IICCON = temp & (~S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
IICCON = IICCON | (1<<7); /*restore ACK generation*/
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
||||
{
|
||||
int j, k;
|
||||
u32 rIICSTAT, temp;
|
||||
|
||||
|
||||
/*
|
||||
send the device offset
|
||||
*/
|
||||
|
||||
rIICSTAT = 0xD0;
|
||||
IICSTAT = rIICSTAT;
|
||||
|
||||
IICDS = chip; /* this is a write operation... */
|
||||
|
||||
rIICSTAT |= (1<<5);
|
||||
IICSTAT = rIICSTAT;
|
||||
|
||||
IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
/* wait and check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
temp = IICSTAT;
|
||||
if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
|
||||
return -1;
|
||||
|
||||
IICDS = addr;
|
||||
IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
/* wait and check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
udelay(2000);
|
||||
}
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
temp = IICSTAT;
|
||||
if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
|
||||
return -1;
|
||||
|
||||
/*
|
||||
now we can start with the read write operation
|
||||
*/
|
||||
for (j=0; j<len; j++) {
|
||||
|
||||
IICDS = buffer[j]; /*prerare data to write*/
|
||||
|
||||
/*clear pending bit to resume*/
|
||||
|
||||
temp = IICCON & ~(S3C44B0X_rIIC_INTPEND);
|
||||
IICCON = temp;
|
||||
|
||||
/* wait but NOT check ACK */
|
||||
for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
|
||||
temp = IICCON;
|
||||
if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
|
||||
break;
|
||||
|
||||
udelay(2000);
|
||||
}
|
||||
|
||||
if (k==S3C44B0_IIC_TIMEOUT)
|
||||
return -1;
|
||||
|
||||
} /* end for(j) */
|
||||
|
||||
/* sending stop to terminate */
|
||||
rIICSTAT = 0xD0; /*master send*/
|
||||
IICSTAT = rIICSTAT;
|
||||
/*Clear Int Pending Bit to RESUME*/
|
||||
temp = IICCON;
|
||||
IICCON = temp & (~S3C44B0X_rIIC_INTPEND);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -67,6 +67,8 @@
|
|||
*/
|
||||
#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
|
||||
|
||||
#define CONFIG_S3C44B0_I2C
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue