V3s_Allwinner
/
uboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 2 Wiki Activity

i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c 

This patch adds the possibility to call a board specific
i2c bus reset routine for the fsl_i2c bus driver, and adds
this option for the keymile kmeter1 board.

The deblock sequence for this board is implemented and
tested in the following way:

CR = 0x20 (release SDA and SCL pin)
CR = 0xa0 (start read)
dummy read
dummy read
if 2. dummy read == 0x00
	3. dummy read

CR = 0x80 (SDA and SCL now 1 SR = 0x86)
CR = 0x00 (Modul reset SR=0x81)
CR = 0x80 (SDA and SCL = 1, SR = 0x81)

Signed-off-by: Heiko Schocher <hs@denx.de>
This commit is contained in:
Heiko Schocher 2009-07-09 12:04:26 +02:00
parent 1bc1538613
commit 39df00d9ae
3 changed files with 26 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
board/keymile/common/common.c
View File

@ -424,6 +424,7 @@ static int get_scl (void)
#endif #endif
#if !defined(CONFIG_KMETER1)
static void writeStartSeq (void) static void writeStartSeq (void)
{ {
set_sda (1); set_sda (1);
@ -474,6 +475,7 @@ static int i2c_make_abort (void)
get_sda (); get_sda ();
return ret; return ret;
} }
#endif
/** /**
* i2c_init_board - reset i2c bus. When the board is powercycled during a * i2c_init_board - reset i2c bus. When the board is powercycled during a
@ -481,6 +483,23 @@ static int i2c_make_abort (void)
*/ */
void i2c_init_board(void) void i2c_init_board(void)
{ {
#if defined(CONFIG_KMETER1)
struct fsl_i2c *dev;
dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
uchar dummy;
out_8 (&dev->cr, (I2C_CR_MSTA));
out_8 (&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
dummy = in_8(&dev->dr);
dummy = in_8(&dev->dr);
if (dummy != 0xff) {
dummy = in_8(&dev->dr);
}
out_8 (&dev->cr, (I2C_CR_MEN));
out_8 (&dev->cr, 0x00);
out_8 (&dev->cr, (I2C_CR_MEN));
#else
#if defined(CONFIG_HARD_I2C) #if defined(CONFIG_HARD_I2C)
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
@ -500,6 +519,7 @@ void i2c_init_board(void)
/* Set the PortPins back to use for I2C */ /* Set the PortPins back to use for I2C */
setports (0); setports (0);
#endif #endif
#endif
} }
#endif #endif
#endif #endif

6
drivers/i2c/fsl_i2c.c
View File

@ -178,6 +178,12 @@ i2c_init(int speed, int slaveadd)
struct fsl_i2c *dev; struct fsl_i2c *dev;
unsigned int temp; unsigned int temp;
#ifdef CONFIG_SYS_I2C_INIT_BOARD
/* call board specific i2c bus reset routine before accessing the */
/* environment, which might be in a chip on that bus. For details */
/* about this problem see doc/I2C_Edge_Conditions. */
i2c_init_board();
#endif
dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET); dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
writeb(0, &dev->cr); /* stop I2C controller */ writeb(0, &dev->cr); /* stop I2C controller */

1
include/configs/kmeter1.h
View File

@ -33,7 +33,6 @@
/* include common defines/options for all Keymile boards */ /* include common defines/options for all Keymile boards */
#include "keymile-common.h" #include "keymile-common.h"
#undef CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_MISC_INIT_R 1 #define CONFIG_MISC_INIT_R 1
/* /*
* System Clock Setup * System Clock Setup